RE: [newbie] How to work PCMCIA
I've never managed to get my Psion GoldCard PCMCIA card working. This is a 56K fax modem and 10/100 Ethernet card. It gets detected at boot and correctly identified, but I then get (type by hand - any typo's are mine) cs: cb_config(bus 5) cs: could not allocate 512 IO ports for cardbus Socket 1 kernel: Trying to free non-existant resource (-01ff) epic_cb:RequestIO: Out of Resource Anyone got any clues as to what I can fiddle with to work what the problem is (card using incorrect resources and whatnot?) and how to fix it (i.e. where do you specify which resources the card should use). I've been through the PCMCIA HOW-TO, and it should, according to the HOW-TO, be working now, but it's not! :( -Original Message- From: Derek Jennings [SMTP:[EMAIL PROTECTED]] Sent: Sunday, January 27, 2002 12:37 PM To: [EMAIL PROTECTED] Subject:RE: [newbie] How to work PCMCIA Well first check you have rpm kernel-pcmcia-cs loaded. Next check your pcmcia cards are able to be recognised. In a root terminal type probe You should then be told which model of pcmcia bus adapter you have fitted, and how many sockets. Next open Mandrake Control CenteHardwareNetwork cards Is your pcmcia card shown? If it is and a kernel module is shown then your card almost certainly is already working, you just need to assign IP addresses etc. If it is not listed then look for /etc/sysconfig/pcmcia The first line of this file should read PCMCIA=yes the second line will probably say PCIC=i82365 Next take a look at /etc/modules.conf It should contain the line pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start If that is all OK then your computer should automatically recognise the pcmcia card on boot and insert the correct module. Note : Netconf will NOT show the module. That does not mean it is not working. You can still use Netconf to set IP address etc. HardDrake WILL show the module HTH derek = Original Message From YUKKI [EMAIL PROTECTED] = Hi all i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE but it's not working now what i have to check it?? *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* Yukki (Yuki Ikuno) Sing a song is my life [EMAIL PROTECTED] *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* --- The Fastest Browser on Earth. Get your FREE download of Opera at http://www.opera.com/download/ --- File: message.footer ** This email and any files sent with it are intended only for the named recipient. If you are not the named recipient please telephone/email the sender immediately. You should not disclose the content or take/retain/distribute any copies. ** Norwich Union Life Pensions Limited Registered Office 2 Rougier Street York YO90 1UU Registered in England Number 3253947 A member of the Norwich Union Marketing Group which is regulated by the Personal Investment Authority. Member of the Association of British Insurers. For further Enquires 01603 622200 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to work PCMCIA
On Tuesday 29 January 2002 14:21, you wrote: I've never managed to get my Psion GoldCard PCMCIA card working. This is a 56K fax modem and 10/100 Ethernet card. It gets detected at boot and correctly identified, but I then get (type by hand - any typo's are mine) cs: cb_config(bus 5) cs: could not allocate 512 IO ports for cardbus Socket 1 kernel: Trying to free non-existant resource (-01ff) epic_cb: RequestIO: Out of Resource Anyone got any clues as to what I can fiddle with to work what the problem is (card using incorrect resources and whatnot?) and how to fix it (i.e. where do you specify which resources the card should use). I've been through the PCMCIA HOW-TO, and it should, according to the HOW-TO, be working now, but it's not! :( A while back I had a problem with my serial connection to my gsm not working whereas the pcmcia card worked fine. It all came down to IRQ and i/o conflicts. Have you checked those options? -- Harm Bathoorn. Sudden Death!! Microsoft Office demands it's serial-code AGAIN!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] How to work PCMCIA
I can do - where do I start looking? For example, if I wanted to force the card to use IRQ5, where do I set that kind of thing up? (I suck at the PC config bit!) -Original Message- From: Harm Bathoorn [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, January 29, 2002 1:48 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] How to work PCMCIA On Tuesday 29 January 2002 14:21, you wrote: I've never managed to get my Psion GoldCard PCMCIA card working. This is a 56K fax modem and 10/100 Ethernet card. It gets detected at boot and correctly identified, but I then get (type by hand - any typo's are mine) cs: cb_config(bus 5) cs: could not allocate 512 IO ports for cardbus Socket 1 kernel: Trying to free non-existant resource (-01ff) epic_cb:RequestIO: Out of Resource Anyone got any clues as to what I can fiddle with to work what the problem is (card using incorrect resources and whatnot?) and how to fix it (i.e. where do you specify which resources the card should use). I've been through the PCMCIA HOW-TO, and it should, according to the HOW-TO, be working now, but it's not! :( A while back I had a problem with my serial connection to my gsm not working whereas the pcmcia card worked fine. It all came down to IRQ and i/o conflicts. Have you checked those options? -- Harm Bathoorn. Sudden Death!! Microsoft Office demands it's serial-code AGAIN!! File: message.footer ** This email and any files sent with it are intended only for the named recipient. If you are not the named recipient please telephone/email the sender immediately. You should not disclose the content or take/retain/distribute any copies. ** Norwich Union Life Pensions Limited Registered Office 2 Rougier Street York YO90 1UU Registered in England Number 3253947 A member of the Norwich Union Marketing Group which is regulated by the Personal Investment Authority. Member of the Association of British Insurers. For further Enquires 01603 622200 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to work PCMCIA
I cannot help with that particular card, but have you tried the PCMCIA mailing list at the sourceforge page? There is a folder for most pcmcia cards around, and the guy who runs the list is very helpful so long as you demonstrate you have tried to get it running. derek On Tuesday 29 January 2002 13:21, FLYNN, Steve wrote: I've never managed to get my Psion GoldCard PCMCIA card working. This is a 56K fax modem and 10/100 Ethernet card. It gets detected at boot and correctly identified, but I then get (type by hand - any typo's are mine) cs: cb_config(bus 5) cs: could not allocate 512 IO ports for cardbus Socket 1 kernel: Trying to free non-existant resource (-01ff) epic_cb: RequestIO: Out of Resource Anyone got any clues as to what I can fiddle with to work what the problem is (card using incorrect resources and whatnot?) and how to fix it (i.e. where do you specify which resources the card should use). I've been through the PCMCIA HOW-TO, and it should, according to the HOW-TO, be working now, but it's not! :( -Original Message- From: Derek Jennings [SMTP:[EMAIL PROTECTED]] Sent: Sunday, January 27, 2002 12:37 PM To: [EMAIL PROTECTED] Subject:RE: [newbie] How to work PCMCIA Well first check you have rpm kernel-pcmcia-cs loaded. Next check your pcmcia cards are able to be recognised. In a root terminal type probe You should then be told which model of pcmcia bus adapter you have fitted, and how many sockets. Next open Mandrake Control CenteHardwareNetwork cards Is your pcmcia card shown? If it is and a kernel module is shown then your card almost certainly is already working, you just need to assign IP addresses etc. If it is not listed then look for /etc/sysconfig/pcmcia The first line of this file should read PCMCIA=yes the second line will probably say PCIC=i82365 Next take a look at /etc/modules.conf It should contain the line pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start If that is all OK then your computer should automatically recognise the pcmcia card on boot and insert the correct module. Note : Netconf will NOT show the module. That does not mean it is not working. You can still use Netconf to set IP address etc. HardDrake WILL show the module HTH derek = Original Message From YUKKI [EMAIL PROTECTED] = Hi all i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE but it's not working now what i have to check it?? *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* Yukki (Yuki Ikuno) Sing a song is my life [EMAIL PROTECTED] *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* --- The Fastest Browser on Earth. Get your FREE download of Opera at http://www.opera.com/download/ --- File: message.footer ** This email and any files sent with it are intended only for the named recipient. If you are not the named recipient please telephone/email the sender immediately. You should not disclose the content or take/retain/distribute any copies. ** Norwich Union Life Pensions Limited Registered Office 2 Rougier Street York YO90 1UU Registered in England Number 3253947 A member of the Norwich Union Marketing Group which is regulated by the Personal Investment Authority. Member of the Association of British Insurers. For further Enquires 01603 622200 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to work PCMCIA
On Tuesday 29 January 2002 16:06, you wrote: I can do - where do I start looking? For example, if I wanted to force the card to use IRQ5, where do I set that kind of thing up? (I suck at the PC config bit!) well you can take a look at /var/log/syslog if there are any conflicts or shares. /etc/pcmcia/config.opts tells you which irq's are reserved for pcmcia -probably 3, the file is fairly self explanatory. Then check whether for instance the Infra Red port is sharing the same irq for instance (there could be more devices). I don't what you've got (I dropped in fairly late here) but if you can change settings through the BIOS, then that's easy enough. In my case I had a Thinkpad with a moronic windoze like BIOSinterface that doesn't give any real options- one needs a special configuration program that runs under DOS to change irq settings. -- Good Luck, Harm Bathoorn. Sudden Death!! Microsoft Office demands it's serial-code AGAIN!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] How to work PCMCIA
No confilicts in Syslog other than the one's I posted when I insert or remove the card. The IR port on my Inspiron 3600 doesn't work, neither in windows nor in Linux, so I've assumed it's FUBAR'd. As it's a fairly old machine, the BIOS isn't the most configurable I've ever seen. I think I'll have a sniff around the /etc/pcmcia config files and fiddle with stuff until it works. Is there aynthing in Linux which can dump information about DMA, IRQ's in use and memory address ranges being used - the kind of info I have to boot into Windows to get from My Computer properties panel? All of my Unix experience comes from AIX 6000's and Dynix based Sequent boxes so I'm not to clued up on IRQ's and PC based stuff. -Original Message- From: Harm Bathoorn [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, January 29, 2002 5:33 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] How to work PCMCIA On Tuesday 29 January 2002 16:06, you wrote: I can do - where do I start looking? For example, if I wanted to force the card to use IRQ5, where do I set that kind of thing up? (I suck at the PC config bit!) well you can take a look at /var/log/syslog if there are any conflicts or shares. /etc/pcmcia/config.opts tells you which irq's are reserved for pcmcia -probably 3, the file is fairly self explanatory. Then check whether for instance the Infra Red port is sharing the same irq for instance (there could be more devices). I don't what you've got (I dropped in fairly late here) but if you can change settings through the BIOS, then that's easy enough. In my case I had a Thinkpad with a moronic windoze like BIOSinterface that doesn't give any real options- one needs a special configuration program that runs under DOS to change irq settings. -- Good Luck, Harm Bathoorn. Sudden Death!! Microsoft Office demands it's serial-code AGAIN!! File: message.footer ** This email and any files sent with it are intended only for the named recipient. If you are not the named recipient please telephone/email the sender immediately. You should not disclose the content or take/retain/distribute any copies. ** Norwich Union Life Pensions Limited Registered Office 2 Rougier Street York YO90 1UU Registered in England Number 3253947 A member of the Norwich Union Marketing Group which is regulated by the Personal Investment Authority. Member of the Association of British Insurers. For further Enquires 01603 622200 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] How to work PCMCIA
Well first check you have rpm kernel-pcmcia-cs loaded. Next check your pcmcia cards are able to be recognised. In a root terminal type probe You should then be told which model of pcmcia bus adapter you have fitted, and how many sockets. Next open Mandrake Control CenteHardwareNetwork cards Is your pcmcia card shown? If it is and a kernel module is shown then your card almost certainly is already working, you just need to assign IP addresses etc. If it is not listed then look for /etc/sysconfig/pcmcia The first line of this file should read PCMCIA=yes the second line will probably say PCIC=i82365 Next take a look at /etc/modules.conf It should contain the line pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start If that is all OK then your computer should automatically recognise the pcmcia card on boot and insert the correct module. Note : Netconf will NOT show the module. That does not mean it is not working. You can still use Netconf to set IP address etc. HardDrake WILL show the module HTH derek = Original Message From YUKKI [EMAIL PROTECTED] = Hi all i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE but it's not working now what i have to check it?? *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* Yukki (Yuki Ikuno) Sing a song is my life [EMAIL PROTECTED] *?`?`*?`?`*?`?`*?`?`*?`?`*?`?`* --- The Fastest Browser on Earth. Get your FREE download of Opera at http://www.opera.com/download/ --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] How to work PCMCIA
Es Diumenge 27 Gener 2002 08:10, en YUKKI va escriure: Hi all i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE Have you tryed to run DrakConf - Network with the card in ? If that doesn't work, what show the following commands: # ifconfig # cardctl ident Hope that helps... -- Joan Tur. Ibiza - Spain Yahoo AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] How to work PCMCIA
Hi all i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE but it's not working now what i have to check it?? *〜〜*〜〜*〜〜*〜〜*〜〜*〜〜* Yukki (Yuki Ikuno) Sing a song is my life [EMAIL PROTECTED] *〜〜*〜〜*〜〜*〜〜*〜〜*〜〜* Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com