Re: [newbie] SiS 630 chipset
Hi how did u go with this ( why i'm i asking ? i have a tagra notebook that has a sis 630 video card and i' get black srceen ) now from what i can pick up from the http://www.xfree86.org/ i'm getting this 4. Troubleshooting Some video modes with high dot-clocks don't work at all, resulting on black screen. Lowering dotclock in that case could solve the problem. but i'n not to sure what this is all about ( going to read more about it ) Michael Falzon Last Of The BBs Sysop Mozy's Swamp BBs Red Dwarf BBs http://mozysswamp.yi.org Registered Linux user #204397 - Original Message - From: Navin Daryanani [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, August 31, 2001 2:54 PM Subject: RE: [newbie] SiS 630 chipset yes. I have tried the driver from www.sis.com - editing of /etc/X11/XFree86- manually or with xconfigurator with various combinations on parameters, etc. nothing. the only thing I have not tried is recompiling the kernel. navin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Jennings Sent: Friday, 31 August 2001 12:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] SiS 630 chipset -- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SiS 630 chipset
I just bought a SiS motherboard. Does SiS stand for SiS(ie), cause this motherboard is a pain! On Thu, 6 Sep 2001, Michael Falzon wrote: Hi how did u go with this ( why i'm i asking ? i have a tagra notebook that has a sis 630 video card and i' get black srceen ) now from what i can pick up from the http://www.xfree86.org/ i'm getting this 4. Troubleshooting Some video modes with high dot-clocks don't work at all, resulting on black screen. Lowering dotclock in that case could solve the problem. but i'n not to sure what this is all about ( going to read more about it ) Michael Falzon Last Of The BBs Sysop Mozy's Swamp BBs Red Dwarf BBs http://mozysswamp.yi.org Registered Linux user #204397 - Original Message - From: Navin Daryanani [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, August 31, 2001 2:54 PM Subject: RE: [newbie] SiS 630 chipset yes. I have tried the driver from www.sis.com - editing of /etc/X11/XFree86- manually or with xconfigurator with various combinations on parameters, etc. nothing. the only thing I have not tried is recompiling the kernel. navin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Jennings Sent: Friday, 31 August 2001 12:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] SiS 630 chipset -- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SiS 630 chipset
Hi Network card works ok ( sis 900 pci) USB works ok ( sis 7001 ) sound works ok (sis 7018) it just not the display (sis 630 ) if it was not a notebook i wound have just remove it - Original Message - From: Arthur H. Johnson II [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, September 05, 2001 11:13 AM Subject: Re: [newbie] SiS 630 chipset I just bought a SiS motherboard. Does SiS stand for SiS(ie), cause this motherboard is a pain! On Thu, 6 Sep 2001, Michael Falzon wrote: Hi how did u go with this ( why i'm i asking ? i have a tagra notebook that has a sis 630 video card and i' get black srceen ) now from what i can pick up from the http://www.xfree86.org/ i'm getting this 4. Troubleshooting Some video modes with high dot-clocks don't work at all, resulting on black screen. Lowering dotclock in that case could solve the problem. but i'n not to sure what this is all about ( going to read more about it ) Michael Falzon Last Of The BBs Sysop Mozy's Swamp BBs Red Dwarf BBs http://mozysswamp.yi.org Registered Linux user #204397 - Original Message - From: Navin Daryanani [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, August 31, 2001 2:54 PM Subject: RE: [newbie] SiS 630 chipset yes. I have tried the driver from www.sis.com - editing of /etc/X11/XFree86- manually or with xconfigurator with various combinations on parameters, etc. nothing. the only thing I have not tried is recompiling the kernel. navin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Jennings Sent: Friday, 31 August 2001 12:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] SiS 630 chipset -- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SiS 630 chipset
Everyting works fine, just the Video card sucks. On Thu, 6 Sep 2001, Michael Falzon wrote: Hi Network card works ok ( sis 900 pci) USB works ok ( sis 7001 ) sound works ok (sis 7018) it just not the display (sis 630 ) if it was not a notebook i wound have just remove it - Original Message - From: Arthur H. Johnson II [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, September 05, 2001 11:13 AM Subject: Re: [newbie] SiS 630 chipset I just bought a SiS motherboard. Does SiS stand for SiS(ie), cause this motherboard is a pain! On Thu, 6 Sep 2001, Michael Falzon wrote: Hi how did u go with this ( why i'm i asking ? i have a tagra notebook that has a sis 630 video card and i' get black srceen ) now from what i can pick up from the http://www.xfree86.org/ i'm getting this 4. Troubleshooting Some video modes with high dot-clocks don't work at all, resulting on black screen. Lowering dotclock in that case could solve the problem. but i'n not to sure what this is all about ( going to read more about it ) Michael Falzon Last Of The BBs Sysop Mozy's Swamp BBs Red Dwarf BBs http://mozysswamp.yi.org Registered Linux user #204397 - Original Message - From: Navin Daryanani [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, August 31, 2001 2:54 PM Subject: RE: [newbie] SiS 630 chipset yes. I have tried the driver from www.sis.com - editing of /etc/X11/XFree86- manually or with xconfigurator with various combinations on parameters, etc. nothing. the only thing I have not tried is recompiling the kernel. navin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Jennings Sent: Friday, 31 August 2001 12:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] SiS 630 chipset -- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Arthur H. Johnson II [EMAIL PROTECTED] The Linux Box http://www.linuxbox.nu Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SiS 630 chipset
-- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] SiS 630 chipset
yes. I have tried the driver from www.sis.com - editing of /etc/X11/XFree86- manually or with xconfigurator with various combinations on parameters, etc. nothing. the only thing I have not tried is recompiling the kernel. navin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Jennings Sent: Friday, 31 August 2001 12:20 AM To: [EMAIL PROTECTED] Subject: Re: [newbie] SiS 630 chipset -- Forwarded Message -- Subject: Re: [newbie] SiS 735 chipset/ecs k7s5a Date: Thu, 30 Aug 2001 10:17:07 -0400 From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] On Thursday 30 August 2001 3:24 am, you wrote: Talking about SiS -- please tell me if anyone can solve my problem I have a laptop with the display SiS630. I installed Mdk 8.0, freq1, freq2 and freq3. None of them could recognize the display device. Whenever I used to start X the screen would come divided in two where the bottom part of the screen would somehow wrap around the top of the screen. I tried everything I knew or could find on the web but to no success. Ultimately I used the code vga=791 in the lilo.conf. That gave me a framebuffer mode (I think). BUT the problem does not stop here. I could do everything once I log in X. But once I log out of the X session - the text mode does not come back - no matter what I try to do. I have tried switching with the virtual screens keys, etc. but to no success. If I restart the X session by typing startx I do get the X session back. You can edit the file /etc/X11/XF86Config (if you are using Xfree 3.x.x) or /etx/X11/XF86Config-4 (for XFree 4.x.x) and set up any monitor parameters you please. Moreover my soundcard is never detected too - thus I can never play sound on my linux box. Can anyone can please suggest something. Did you try the Sis Driver? Available at http://www.sis.com/support/driver/linux.htm There are video and audio drivers there. Regards Navin Good luck Derek --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com