[newbie] Wireless wpc54g ver2
I hope some one can point me in the right direction. This card uses the TI chipset and is recognized on boot but does not load. From dmesg I collected the following: PCI: Enabling device :02:00.0 ( - 0002) PCI: Setting latency timer of device :02:00.0 to 64 acx100_probe_pci: WARNING: ACX111 support is highly experimental! Found ACX111-based wireless network card at :02:00.0, irq:10, phymem1:0x1082, phymem2:0x1080, mem1:0xcfb0f000, mem1_size:8192, mem2:0xcfb12000, mem2_size:131072. acx100_probe_pci: using ACX111 io resource addresses (size: 54) hw_unavailable = 1 acx_show_card_eeprom_id: EEPROM card ID string check found uninitialised card ID: this is a SpeedStream SS1021 or Gigafast WF721-AEX, no?? reset hw_unavailable++ acx100_reset_mac: enable soft reset... acx100_reset_mac: disable soft reset and go to init mode... ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!) acx100_reset_dev: Failed to upload firmware to the ACX111 acx100_probe_pci: TI acx_pci: MAC initialize failure! acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loading FAILED acx_pci: probe of :02:00.0 failed with error -5 It seems that the drivers are not being loaded but I am at a loss as to what script file calls them or where the drivers are. does anyone see any other problems I need toaddress? Thanks Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
Pat Patterson wrote: I hope some one can point me in the right direction. This card uses the TI chipset and is recognized on boot but does not load. From dmesg I collected the following: PCI: Enabling device :02:00.0 ( - 0002) PCI: Setting latency timer of device :02:00.0 to 64 acx100_probe_pci: WARNING: ACX111 support is highly experimental! Found ACX111-based wireless network card at :02:00.0, irq:10, phymem1:0x1082, phymem2:0x1080, mem1:0xcfb0f000, mem1_size:8192, mem2:0xcfb12000, mem2_size:131072. acx100_probe_pci: using ACX111 io resource addresses (size: 54) hw_unavailable = 1 acx_show_card_eeprom_id: EEPROM card ID string check found uninitialised card ID: this is a SpeedStream SS1021 or Gigafast WF721-AEX, no?? reset hw_unavailable++ acx100_reset_mac: enable soft reset... acx100_reset_mac: disable soft reset and go to init mode... ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!) acx100_reset_dev: Failed to upload firmware to the ACX111 acx100_probe_pci: TI acx_pci: MAC initialize failure! acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loading FAILED acx_pci: probe of :02:00.0 failed with error -5 It seems that the drivers are not being loaded but I am at a loss as to what script file calls them or where the drivers are. does anyone see any other problems I need toaddress? Thanks Pat Have you looked at ndiswrapper? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
On Monday 08 November 2004 01:24, Pat Patterson wrote: I hope some one can point me in the right direction. This card uses the TI chipset and is recognized on boot but does not load. From dmesg I collected the following: SNIP ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!) SNIP It seems that the drivers are not being loaded but I am at a loss as to what script file calls them or where the drivers are. does anyone see any other problems I need toaddress? Thanks Pat You need the proprietary firmware for your card from your Windows CD This HOWTO should help you http://www.houseofcraig.net/acx100_howto.php Firmware usually goes in /lib/hotplug/firmware in Mandrake although the HOWTO mentions a different location. derek -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
You need the proprietary firmware for your card from your Windows CD This HOWTO should help you http://www.houseofcraig.net/acx100_howto.php Firmware usually goes in /lib/hotplug/firmware in Mandrake although the HOWTO mentions a different location. derek -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Thanks I will look it up and try it. I thought it might be something like that but I could not find anything that said so. Let you know how i goes thanks again Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
On 7 Nov 2004 at 18:07, Sevatio wrote: Have you looked at ndiswrapper? Yes and have had problems wit it due to ignorance i am sure :) Since this card has native support in 10.1 I want to try that first Thanks, Pat ps going to jump into what Derrick suggested in another post will report back Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com