Re: [newbie] Lilo Problem
I had already tried the Boot Config and Boot Loader, anything that I do there is ignored. I'm not sure that I understand the second part of your answer. Where exactly do I put those statements? In the boot loader? Rich Kaj Haulrich wrote: Rich wrote: I just installed a second copy of Mandrake 8.1 on some extra space I had on a second hard drive. The problem is that lilo is now completely ignored on boot, the latest install is booted every time, lilo never shows up at all. What do I have to modify to get lilo to show up? Rich, two suggestions : If you run KDE or GNOME, open Control Center, type in your root-password, and select Boot. Then, select Boot Config. Now, in the upper right corner, click Configure. This opens a dialog-box, called Bootloader Main Options. Here, you can select the boot device. I guess you can choose whatever here. If still in trouble, post two files to the list : 1. : /etc/lilo.conf 2. : /etc/fstab Then, I'm sure you'll be up and running in no time at all. HTH Kaj Haulrich Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Lilo Problem
Rich wrote: I had already tried the Boot Config and Boot Loader, anything that I do there is ignored. I'm not sure that I understand the second part of your answer. Where exactly do I put those statements? In the boot loader? Rich Kaj Haulrich wrote: Rich wrote: I just installed a second copy of Mandrake 8.1 on some extra space I had on a second hard drive. The problem is that lilo is now completely ignored on boot, the latest install is booted every time, lilo never shows up at all. What do I have to modify to get lilo to show up? Rich, two suggestions : If you run KDE or GNOME, open Control Center, type in your root-password, and select Boot. Then, select Boot Config. Now, in the upper right corner, click Configure. This opens a dialog-box, called Bootloader Main Options. Here, you can select the boot device. I guess you can choose whatever here. If still in trouble, post two files to the list : 1. : /etc/lilo.conf 2. : /etc/fstab Then, I'm sure you'll be up and running in no time at all. HTH Kaj Haulrich Rich, what I mean is that in order to help you, simply post a new message to the list with information on those two files. You can open them in a text-editor, copy the text and paste it into your mail. That way, I'm sure we can help you out. Likewise, it would be nice to know where your hard-disks are located on the IDE-bus, i.e. first/second and master/slave. For your information, the scheme usually is as follows : hda = master on first IDE-bus (normally the first harddisk, with partitions hda1, hda2, hda3 and so on.) hdb = slave on first IDE-bus (I guess that's your second harddisk, with partitions hdb1, hdb2..) hdc = master on second IDE-bus (normally a CD-drive) hdd = slave on second IDE-bus (sometimes a CD-Writer). If you have the guts to experiment with editing those files, remember to make a boot-floppy first ! And finally : after editing lilo.conf (as root), don't forget to run lilo (just type : lilo). If still in trouble, get back to the list. Kaj Haulrich Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Lilo Problem
sounds to me like you installed lilo outside the MBR. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kaj Haulrich Sent: Tuesday, February 19, 2002 2:18 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] Lilo Problem Rich wrote: I had already tried the Boot Config and Boot Loader, anything that I do there is ignored. I'm not sure that I understand the second part of your answer. Where exactly do I put those statements? In the boot loader? Rich Kaj Haulrich wrote: Rich wrote: I just installed a second copy of Mandrake 8.1 on some extra space I had on a second hard drive. The problem is that lilo is now completely ignored on boot, the latest install is booted every time, lilo never shows up at all. What do I have to modify to get lilo to show up? Rich, two suggestions : If you run KDE or GNOME, open Control Center, type in your root-password, and select Boot. Then, select Boot Config. Now, in the upper right corner, click Configure. This opens a dialog-box, called Bootloader Main Options. Here, you can select the boot device. I guess you can choose whatever here. If still in trouble, post two files to the list : 1. : /etc/lilo.conf 2. : /etc/fstab Then, I'm sure you'll be up and running in no time at all. HTH Kaj Haulrich Rich, what I mean is that in order to help you, simply post a new message to the list with information on those two files. You can open them in a text-editor, copy the text and paste it into your mail. That way, I'm sure we can help you out. Likewise, it would be nice to know where your hard-disks are located on the IDE-bus, i.e. first/second and master/slave. For your information, the scheme usually is as follows : hda = master on first IDE-bus (normally the first harddisk, with partitions hda1, hda2, hda3 and so on.) hdb = slave on first IDE-bus (I guess that's your second harddisk, with partitions hdb1, hdb2..) hdc = master on second IDE-bus (normally a CD-drive) hdd = slave on second IDE-bus (sometimes a CD-Writer). If you have the guts to experiment with editing those files, remember to make a boot-floppy first ! And finally : after editing lilo.conf (as root), don't forget to run lilo (just type : lilo). If still in trouble, get back to the list. Kaj Haulrich _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] LILO problem
It was Wed, 25 Jul 2001 14:46:36 -0400 when Brian Meadows wrote: I go through the setup, everything installs just fine, and the setup routines tells me that my system will be rebooted. It finds the Promise controller and all the drives, but then all I get is a blank screen except for the two characters 'LI' at the top left of the screen - presumably this is part of the LILO prompt. Perhaps this link will help you further: http://www.linuxnewbie.org/nhf/intel/osbooting/lilo_dual.html Paul -- No amount of time can erase the memory of a good cat. http://nlpagan.net - Registered Linux User 174403 Linux Mandrake 8.0 - Sylpheed 0.5.1 ** http://www.care2.com - when you care **
Re: [newbie] Lilo Problem
Jasonthe mbr of your primary master is not hda1, it is hda. If you've installed lilo on hdd1 and hda1 like you said then that's why Linux won't boot. Lilo needs to overwrite the dos/windows boot loader on /dev/hda then Linux should boot and windows should be a secondary choice (press tab to see your choices at bootup time). Alan Jason Lindsay wrote: Sorry if this is a resend, but I changed email addys recieving this list. I recently installed Mandrake 7 on my machine, on /dev/hdd1 When I install LILO, and reboot, I get nothing but pages and pages of : 01 01 01 01 01 01 01 01 etc. until I turn it off. Is anyone else having this problem, and how do I fix it? It does the same thing whether I install on the superblock of /dev/hdd1, or on the MBR on /dev/hda1 Here's the system config: /dev/hda: 4.3MB Windows c: drive /dev/hdb: 4.3MB windows data drive /dev/hdc: cdrom /dev/hdd1: ~2GB Linux native partition /dev/hdd2: 256M Linux Swap AMD K6-2 300Mhz 128MB SDRAM SB AWE64 Modem Blaster 56K modem (non-PnP) SMC-based 10Mb ethernet (not currently being used) Any thoughts would be appreciated.
Re: [newbie] LILO problem need urgent help
Mount your Caldera filesystem and copy the portion of /etc/lilo.conf that pertains to the Caldera kernel, and paste it into RedHat's lilo.conf. Be sure to specify the correct root partition (like you do for RedHat). Then re-run lilo, and you ought to be set. -Matt Stegman [EMAIL PROTECTED] On Tue, 14 Dec 1999, NEW STAR wrote: I have 2 harddrive. one for Linux(caldera,slackware) and another for Dos(win98/NT.). Today i install Redhat6.1 to remove slackware. Installation is fine.when i reboot my computer LILO prompt shows only Redhat and Dos(used to open win98/NT) but not Caldera and also I'm not able to run Dos.Lilo show me that no Dos image loaded. Redhat run by default. caldera kernel is 2.0.3x, how can i keep redhat kernel for redhat and caldera kernel for caldera.