Re: [newbie] no sound in 9.1
I would search the alsa users mail list archives for your sound card and or your problem and see if someone else had the same trouble. I find the alsa group to be most helpful Aaron Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] no sound in 9.1
On Mon, 22 Dec 2003 12:40:32 -0800 [EMAIL PROTECTED] wrote the words: -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Frans Ketelaars Sent: Monday, December 22, 2003 2:09 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] no sound in 9.1 On Saturday 20 December 2003 14:18, Linux wrote: My computer is silent The mobo is an Intel D865GBF (www.intel.com/design/motherbd/bf). I am using the onboard sound. It works fine under Windows98SE. I use Enlightenment, and I can enable sounds under E, but I don't hear anything. I can also see that esd is running if I run top or kpm. Yes I have turned up the volume in Kmix, and Aumix and alsamixer. Yes I have run the configuration tool in Drake Configure. Below are various commands and their outputs. lspcidrake -v | fgrep AUDIO: snd-intel8x0: Intel Corp.|82801EB AC'97 Audio [MULTIMEDIA_AUDIO] (vendor:8086 device:24d5 subv:8086 subd:e001) grep sound-slot /etc/modules.conf: alias sound-slot-0 snd-intel8x0 /sbin/lsmod: Module Size Used byNot tainted sg 34636 0 (autoclean) parport_pc 25096 1 (autoclean) lp 8096 0 (autoclean) parport34176 1 (autoclean) [parport_pc lp] agpgart40896 6 (autoclean) snd-seq-oss31104 0 (unused) snd-seq-midi-event 5640 0 [snd-seq-oss] snd-seq42608 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss43556 1 snd-mixer-oss 14488 0 [snd-pcm-oss] snd-intel8x0 21988 1 snd-ac97-codec 40160 0 [snd-intel8x0] snd-pcm77536 0 [snd-pcm-oss snd-intel8x0] snd-timer 18376 0 [snd-seq snd-pcm] snd-mpu401-uart 4396 0 [snd-intel8x0] snd-rawmidi17600 0 [snd-mpu401-uart] snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi] snd-page-alloc 7732 0 [snd-intel8x0 snd-pcm] snd40868 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6276 0 [snd] ppp_async 9216 0 (unused) ppp_generic24060 0 [ppp_async] slhc6564 0 [ppp_generic] af_packet 14952 0 (autoclean) e100 56964 1 (autoclean) supermount 15296 4 (autoclean) ide-cd 33856 0 cdrom 31648 0 [ide-cd] ide-scsi 11280 0 ehci-hcd 18568 0 (unused) usb-uhci 24652 0 (unused) usbcore72992 1 [ehci-hcd usb-uhci] rtc 8060 0 (autoclean) reiserfs 175120 2 sd_mod 11548 0 (unused) aic7xxx 120860 0 (unused) scsi_mod 91796 4 [sg ide-scsi sd_mod aic7xxx] /sbin/chkconfig --list sound: sound 0:off 1:off 2:on3:on4:on5:on 6:off /sbin/chkconfig --list alsa: alsa0:off 1:off 2:on3:on4:on5:on 6:off /sbin/chkconfig --list alsa: vol 100, 100, P pcm 100, 100 speaker 100, 100 line 100, 100, P mic 100, 100, R cd 100, 100, P igain 100, 100 line1 100, 100, P phin 100, 100, P video 100, 100, P /sbin/fuser -v /dev/dsp: USERPID ACCESS COMMAND /dev/dsp skippi 1841 f wavplay It seems /dev/dsp is used by wavplay. Wavplay is part of xcdroast according to 'urpmf wavplay'. So you are correct. I checked this again and nothing is using /dev/dsp. I must have had XCDroast running at the time. I fired up XMMS and then it showed that XMMS is using /dev/dsp. Any thoughts?? Thank you very much. Adrian Well it's a late reply and probably not very helpful but at least your soundcard is detected and the ALSA drivers are loaded. How about logging in to KDE to test sound? Also, do applications 'appear' to play, like a moving progress indicator? I will take late replies. That's better than none. =) Ok, applications do appear to be playing. Right now XMMS is playing a song. The progress indicator is moving along, the EQ lights are bouncing up and down. Everything looks good right. Just no sound. I logged in to KDE, no love there either. Also nothing from the command line, such as 'play filename.wav'. Good luck! -Frans I mean no offense cause I have done this, did you check which jack you plugged into on the sound card? Most of them will want the green colored port. I Have also noticed that in some cards the pcm will stop sound if turned up to 100. Try shutting down also igain seperately and line and line1 while something is trying to play sound. HTH
Re: [newbie] no sound in 9.1
On Saturday 20 December 2003 14:18, Linux wrote: My computer is silent The mobo is an Intel D865GBF (www.intel.com/design/motherbd/bf). I am using the onboard sound. It works fine under Windows98SE. I use Enlightenment, and I can enable sounds under E, but I don't hear anything. I can also see that esd is running if I run top or kpm. Yes I have turned up the volume in Kmix, and Aumix and alsamixer. Yes I have run the configuration tool in Drake Configure. Below are various commands and their outputs. lspcidrake -v | fgrep AUDIO: snd-intel8x0: Intel Corp.|82801EB AC'97 Audio [MULTIMEDIA_AUDIO] (vendor:8086 device:24d5 subv:8086 subd:e001) grep sound-slot /etc/modules.conf: alias sound-slot-0 snd-intel8x0 /sbin/lsmod: Module Size Used byNot tainted sg 34636 0 (autoclean) parport_pc 25096 1 (autoclean) lp 8096 0 (autoclean) parport34176 1 (autoclean) [parport_pc lp] agpgart40896 6 (autoclean) snd-seq-oss31104 0 (unused) snd-seq-midi-event 5640 0 [snd-seq-oss] snd-seq42608 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss43556 1 snd-mixer-oss 14488 0 [snd-pcm-oss] snd-intel8x0 21988 1 snd-ac97-codec 40160 0 [snd-intel8x0] snd-pcm77536 0 [snd-pcm-oss snd-intel8x0] snd-timer 18376 0 [snd-seq snd-pcm] snd-mpu401-uart 4396 0 [snd-intel8x0] snd-rawmidi17600 0 [snd-mpu401-uart] snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi] snd-page-alloc 7732 0 [snd-intel8x0 snd-pcm] snd40868 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6276 0 [snd] ppp_async 9216 0 (unused) ppp_generic24060 0 [ppp_async] slhc6564 0 [ppp_generic] af_packet 14952 0 (autoclean) e100 56964 1 (autoclean) supermount 15296 4 (autoclean) ide-cd 33856 0 cdrom 31648 0 [ide-cd] ide-scsi 11280 0 ehci-hcd 18568 0 (unused) usb-uhci 24652 0 (unused) usbcore72992 1 [ehci-hcd usb-uhci] rtc 8060 0 (autoclean) reiserfs 175120 2 sd_mod 11548 0 (unused) aic7xxx 120860 0 (unused) scsi_mod 91796 4 [sg ide-scsi sd_mod aic7xxx] /sbin/chkconfig --list sound: sound 0:off 1:off 2:on3:on4:on5:on6:off /sbin/chkconfig --list alsa: alsa 0:off 1:off 2:on3:on4:on5:on6:off /sbin/chkconfig --list alsa: vol 100, 100, P pcm 100, 100 speaker 100, 100 line 100, 100, P mic 100, 100, R cd 100, 100, P igain 100, 100 line1 100, 100, P phin 100, 100, P video 100, 100, P /sbin/fuser -v /dev/dsp: USERPID ACCESS COMMAND /dev/dsp skippi 1841 f wavplay It seems /dev/dsp is used by wavplay. Wavplay is part of xcdroast according to 'urpmf wavplay'. Any thoughts?? Thank you very much. Adrian Well it's a late reply and probably not very helpful but at least your soundcard is detected and the ALSA drivers are loaded. How about logging in to KDE to test sound? Also, do applications 'appear' to play, like a moving progress indicator? Good luck! -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] no sound in 9.1
Title: RE: [newbie] no sound in 9.1 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Frans Ketelaars Sent: Monday, December 22, 2003 2:09 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] no sound in 9.1 On Saturday 20 December 2003 14:18, Linux wrote: My computer is silent The mobo is an Intel D865GBF (www.intel.com/design/motherbd/bf). I am using the onboard sound. It works fine under Windows98SE. I use Enlightenment, and I can enable sounds under E, but I don't hear anything. I can also see that esd is running if I run top or kpm. Yes I have turned up the volume in Kmix, and Aumix and alsamixer. Yes I have run the configuration tool in Drake Configure. Below are various commands and their outputs. lspcidrake -v | fgrep AUDIO: snd-intel8x0 : Intel Corp.|82801EB AC'97 Audio [MULTIMEDIA_AUDIO] (vendor:8086 device:24d5 subv:8086 subd:e001) grep sound-slot /etc/modules.conf: alias sound-slot-0 snd-intel8x0 /sbin/lsmod: Module Size Used by Not tainted sg 34636 0 (autoclean) parport_pc 25096 1 (autoclean) lp 8096 0 (autoclean) parport 34176 1 (autoclean) [parport_pc lp] agpgart 40896 6 (autoclean) snd-seq-oss 31104 0 (unused) snd-seq-midi-event 5640 0 [snd-seq-oss] snd-seq 42608 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss 43556 1 snd-mixer-oss 14488 0 [snd-pcm-oss] snd-intel8x0 21988 1 snd-ac97-codec 40160 0 [snd-intel8x0] snd-pcm 77536 0 [snd-pcm-oss snd-intel8x0] snd-timer 18376 0 [snd-seq snd-pcm] snd-mpu401-uart 4396 0 [snd-intel8x0] snd-rawmidi 17600 0 [snd-mpu401-uart] snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi] snd-page-alloc 7732 0 [snd-intel8x0 snd-pcm] snd 40868 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6276 0 [snd] ppp_async 9216 0 (unused) ppp_generic 24060 0 [ppp_async] slhc 6564 0 [ppp_generic] af_packet 14952 0 (autoclean) e100 56964 1 (autoclean) supermount 15296 4 (autoclean) ide-cd 33856 0 cdrom 31648 0 [ide-cd] ide-scsi 11280 0 ehci-hcd 18568 0 (unused) usb-uhci 24652 0 (unused) usbcore 72992 1 [ehci-hcd usb-uhci] rtc 8060 0 (autoclean) reiserfs 175120 2 sd_mod 11548 0 (unused) aic7xxx 120860 0 (unused) scsi_mod 91796 4 [sg ide-scsi sd_mod aic7xxx] /sbin/chkconfig --list sound: sound 0:off 1:off 2:on 3:on 4:on 5:on 6:off /sbin/chkconfig --list alsa: alsa 0:off 1:off 2:on 3:on 4:on 5:on 6:off /sbin/chkconfig --list alsa: vol 100, 100, P pcm 100, 100 speaker 100, 100 line 100, 100, P mic 100, 100, R cd 100, 100, P igain 100, 100 line1 100, 100, P phin 100, 100, P video 100, 100, P /sbin/fuser -v /dev/dsp: USER PID ACCESS COMMAND /dev/dsp skippi 1841 f wavplay It seems /dev/dsp is used by wavplay. Wavplay is part of xcdroast according to 'urpmf wavplay'. Any thoughts?? Thank you very much. Adrian Well it's a late reply and probably not very helpful but at least your soundcard is detected and the ALSA drivers are loaded. How about logging in to KDE to test sound? Also, do applications 'appear' to play, like a moving progress indicator? Good luck! -Frans I mean no offense cause I have done this, did you check which jack you plugged into on the sound card? Most of them will want the green colored port. I Have also noticed that in some cards the pcm will stop sound if turned up to 100. Try shutting down also igain seperately and line and line1 while something is trying to play sound. HTH Dennis M.