RE: Re: [newbie] Is there anyone run linux on Intel 810?
Hi, Here you have the information. Greetings. Fabian. 1)less /proc/pci 2)less /etc/modules.conf 3)lsmod 4)ls -al /dev/dsp 5)ls -al /dev/audio 6)ls -al /dev/mixer --- /proc/pci - PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel 82810 GMCH [Graphics Memory Controller Hub] (rev 2). Fast devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 1, function 0: VGA compatible controller: Intel 82810 CGC [Chipset Graphics Controller] (rev 2). Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. No bursts. Prefetchable 32 bit memory at 0xf800 [0xf808]. Non-prefetchable 32 bit memory at 0xffa8 [0xffa8]. Bus 0, device 30, function 0: PCI bridge: Intel Unknown device (rev 2). Vendor id=8086. Device id=2418. Fast devsel. Fast back-to-back capable. Master Capable. No bursts. Min Gnt=2. Bus 0, device 31, function 0: ISA bridge: Intel 82810AA LPC bridge (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 31, function 1: IDE interface: Intel 82810AA IDE (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. I/O at 0xffa0 [0xffa1]. Bus 0, device 31, function 2: USB Controller: Intel 82810AA USB (rev 2). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. No bursts. I/O at 0xef80 [0xef81]. Bus 0, device 31, function 3: SM Bus: Intel 82810AA SMB (rev 2). Medium devsel. Fast back-to-back capable. IRQ 10. I/O at 0xefa0 [0xefa1]. Bus 1, device 7, function 0: Multimedia audio controller: Ensoniq ES1371 (rev 6). Slow devsel. IRQ 3. Master Capable. Latency=64. Min Gnt=12.Max Lat=128. I/O at 0xdf00 [0xdf01]. Bus 1, device 9, function 0: Communication controller: Lucent (ex-ATT) Microelectronics L56xMF (rev 1). Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. No bursts. Min Gnt=252.Max Lat=14. Non-prefetchable 32 bit memory at 0xff6ffc00 [0xff6ffc00]. I/O at 0xdff0 [0xdff1]. I/O at 0xd800 [0xd801]. Bus 1, device 11, function 0: Ethernet controller: Intel 82557 (rev 1). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Prefetchable 32 bit memory at 0xf6aff000 [0xf6aff008]. I/O at 0xdf80 [0xdf81]. Non-prefetchable 32 bit memory at 0xff80 [0xff80]. -- /etc/modules.conf -- alias net-pf-4 ipx pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start alias usb-interface usb-uhci alias parport_lowlevel parport_pc alias sound-slot-0 es1371 post-install snd-card-ens1371 modprobe snd-pcm-oss pre-install plip modprobe parport_pc ; echo 7 /proc/parport/0/irq alias eth0 eepro100 --- lsmod -- Module Size Used by i810 72112 2 agpgart19728 5 [i810] vmnet 16192 3 vmppuser5520 0 (unused) parport_pc 7568 0 [vmppuser] parport 7744 0 [vmppuser parport_pc] vmmon 17792 0 lockd 32208 1 (autoclean) sunrpc 54640 1 (autoclean) [lockd] autofs 9456 2 (autoclean) usb-uhci 19184 0 (unused) usbcore43632 1 [usb-uhci] eepro100 16144 1 (autoclean) es1371 24656 0 soundcore 2800 4 [es1371] nls_cp437 3952 4 (autoclean) vfat9408 2 (autoclean) fat30432 2 (autoclean) [vfat] supermount 14224 2 (autoclean) --- ls -al /dev/dsp crw-rw1 root audio 14, 3 sep 27 10:31 /dev/dsp - ls -al /dev/audio lrwxrwxrwx1 root audio 6 ene 7 16:59 /dev/audio - audio0 - ls -al /dev/mixer -- crw-rw1 root audio 14, 0 sep 27 10:31 /dev/mixer
RE: RE: Re: [newbie] Is there anyone run linux on Intel 810?
thanx a lot. 1) I got my 810 sound work indeed it works but I cannot listen since mixer is set mute. 2) you have not 810 sound card your sound card is Creative Soundblaster thanx again. === ÐÂÀËÃâ·Ñµç×ÓÓÊÏä (http://mail.sina.com.cn) ÐÂÀËÁÄÌì´ó½±-MP3ÉÌÎñͨDVDÊÖ»ú×ê½äµÈ×ÅÄú£»²¢ÌṩÁÄÓÑËÙÅä·þÎñ (http://newchat.sina.com.cn/love/)
Re: [newbie] Is there anyone run linux on Intel 810?
Hello Richard, The computer I work with in the university I study uses the CA810A motherboard, which has the Intel's 810 chipset. I haven't had any serious problems related to the sound and graphics configuration with Mandrake 7.2. The installation procedure was a somewhat hard. No graphics mode for installation started, which is not really a problem, but the length of the text lines were too large to appear completely on the screen. So, I was able to read just the right halves of the messages lines; I had read the tutorial so it wasn't too difficult to make sense out of it. The installation language was spanish. During installation I didn't have a chance to probe the graphics but XConfigurator did the job latter. The sound worked as soon as I started KDE. No extra work was needed!! I can even use kscd to listen music cd's without any kind of trick. I have read in this list that Intel's 810 chipset is the kind of hadware that is not recommended to have, but I am satisfied so far. It even works better than the SiS6326 AGP Graphics Accelerator --which another computer I use has-- in the sense that it seems that the last needs a lot of extra effort to make it work correctly; extra effort that I have gone through partially. Good luck, Fabian. On Fri, 2 Feb 2001, lqlee wrote: hi, all Is there anyone run Linux on Intel 810, and sound work? pls tell us the experience. thanx. Richard __ lee,liqun [EMAIL PROTECTED] [EMAIL PROTECTED] === ÐÂÀËÃâ·Ñµç×ÓÓÊÏä (http://mail.sina.com.cn) ÐÂÀËÁÄÌì´ó½±-MP3ÉÌÎñͨDVDÊÖ»ú×ê½äµÈ×ÅÄú£»²¢ÌṩÁÄÓÑËÙÅä·þÎñ (http://newchat.sina.com.cn/love/)
Re: [newbie] Is there anyone run linux on Intel 810?
On Friday 02 February 2001 07:01 am, you wrote: Yeah, I agree that i810 is not recommended especially if you want to disabled it and use something else. Otherwise it works great with 7.2. Hello Richard, The computer I work with in the university I study uses the CA810A motherboard, which has the Intel's 810 chipset. I haven't had any serious problems related to the sound and graphics configuration with Mandrake 7.2. The installation procedure was a somewhat hard. No graphics mode for installation started, which is not really a problem, but the length of the text lines were too large to appear completely on the screen. So, I was able to read just the right halves of the messages lines; I had read the tutorial so it wasn't too difficult to make sense out of it. The installation language was spanish. During installation I didn't have a chance to probe the graphics but XConfigurator did the job latter. The sound worked as soon as I started KDE. No extra work was needed!! I can even use kscd to listen music cd's without any kind of trick. I have read in this list that Intel's 810 chipset is the kind of hadware that is not recommended to have, but I am satisfied so far. It even works better than the SiS6326 AGP Graphics Accelerator --which another computer I use has-- in the sense that it seems that the last needs a lot of extra effort to make it work correctly; extra effort that I have gone through partially. Good luck, Fabian. On Fri, 2 Feb 2001, lqlee wrote: hi, all Is there anyone run Linux on Intel 810, and sound work? pls tell us the experience. thanx. Richard __ lee,liqun [EMAIL PROTECTED] [EMAIL PROTECTED] === (http://mail.sina.com.cn) -MP3DVD (http://newchat.sina.com.cn/love/)
RE: Re: [newbie] Is there anyone run linux on Intel 810?
OK, would u mind posting your configuration to help me test? 1)less /proc/pci 2)less /etc/modules.conf 3)lsmod 4)ls -al /dev/dsp 5)ls -al /dev/audio 6)ls -al /dev/mixer do not edit them, thanx === ÐÂÀËÃâ·Ñµç×ÓÓÊÏä (http://mail.sina.com.cn) ÐÂÀËÁÄÌì´ó½±-MP3ÉÌÎñͨDVDÊÖ»ú×ê½äµÈ×ÅÄú£»²¢ÌṩÁÄÓÑËÙÅä·þÎñ (http://newchat.sina.com.cn/love/)
