Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
> No it got stuck at > 00040|openflow|DBG:Passive tcp interface bound to port 6636 > 00041|nox|INFO:nox bootstrap complete When you do not specify any module, the controller does not move any further. If you run it as "./nox_core -v -i ptcp:6635 pytutorial", then you will be activity when traffic is initiated or when switches connect to it. ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
Aaron Rosen clemson.edu> writes: > > > When you say got stuck I'm guessing you mean with the bind error? > > Try doing netstat -an | grep <-- port number > > This will tell you if the socket is already in use. > > AaronOn Mon, Aug 15, 2011 at 1:35 PM, Mariam Muntaha <08bicsemmuntaha seecs.edu.pk> wrote: > Srini Seetharaman stanford.edu> writes: > > > > Looks like some other application is already using port 6633. Please > > see if there are other NOX processes already running. To use a > > different port , please run as follows: "./nox_core -i ptcp:" > > > > Srini. > > > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha seecs.edu.pk>wrote: > > > Hi! > > > i'm coding layer-3 forwarder/switch controller but every time i run it i got > > > following error > > > 00042|nox|ERR:bind: Address already in use > > > any ideas? > > > > > > ___ > > > nox-dev mailing list > > > nox-dev noxrepo.org> > http://noxrepo.org/mailman/listinfo/nox-dev > > > > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" > I'm new to openflow and python so i don't understand it much..:( > when i did "./nox_core -v -i ptcp:6635 pytutorial" > then it made no difference and > when i entred this "./nox_core -v -i ptcp:6635" > then it just got stuck. > > > > ___ > nox-dev mailing listnox-dev noxrepo.orghttp://noxrepo.org/mailman/listinfo/nox-dev > > > > > -- Aaron O. RosenMasters Student - Network Communication306B Fluor Daniel > > No it got stuck at 00040|openflow|DBG:Passive tcp interface bound to port 6636 00041|nox|INFO:nox bootstrap complete In the result of netstat it shows that socket 6633 is established, which is the port controller is using,it do not make any trouble when i run topology of multiple switches it only happens when i run topology of L3 switches/ip router:( (http://www.openflow.org/wk/index.php/OpenFlow_Tutorial#Create_Router) ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
Aaron Rosen clemson.edu> writes: > > > When you say got stuck I'm guessing you mean with the bind error? > > Try doing netstat -an | grep <-- port number > > This will tell you if the socket is already in use. > > AaronOn Mon, Aug 15, 2011 at 1:35 PM, Mariam Muntaha <08bicsemmuntaha seecs.edu.pk> wrote: > Srini Seetharaman stanford.edu> writes: > > > > Looks like some other application is already using port 6633. Please > > see if there are other NOX processes already running. To use a > > different port , please run as follows: "./nox_core -i ptcp:" > > > > Srini. > > > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha seecs.edu.pk>wrote: > > > Hi! > > > i'm coding layer-3 forwarder/switch controller but every time i run it i got > > > following error > > > 00042|nox|ERR:bind: Address already in use > > > any ideas? > > > > > > ___ > > > nox-dev mailing list > > > nox-dev noxrepo.org> > http://noxrepo.org/mailman/listinfo/nox-dev > > > > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" > I'm new to openflow and python so i don't understand it much..:( > when i did "./nox_core -v -i ptcp:6635 pytutorial" > then it made no difference and > when i entred this "./nox_core -v -i ptcp:6635" > then it just got stuck. > > > > ___ > nox-dev mailing listnox-dev noxrepo.orghttp://noxrepo.org/mailman/listinfo/nox-dev > > > > > -- Aaron O. RosenMasters Student - Network Communication306B Fluor Daniel > > No it got stuck at 00040|openflow|DBG:Passive tcp interface bound to port 6636 00041|nox|INFO:nox bootstrap complete In the result of netstat it shows that socket 6633 is established, which is the port controller is using,it do not make any trouble when i run topology of multiple switches it only happens when i run topology of L3 switches/ip router:( (http://www.openflow.org/wk/index.php/OpenFlow_Tutorial#Create_Router) ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
When you say got stuck I'm guessing you mean with the bind error? Try doing netstat -an | grep <-- port number This will tell you if the socket is already in use. Aaron On Mon, Aug 15, 2011 at 1:35 PM, Mariam Muntaha < 08bicsemmunt...@seecs.edu.pk> wrote: > Srini Seetharaman stanford.edu> writes: > > > > > Looks like some other application is already using port 6633. Please > > see if there are other NOX processes already running. To use a > > different port , please run as follows: "./nox_core -i ptcp:" > > > > Srini. > > > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha > seecs.edu.pk> > wrote: > > > Hi! > > > i'm coding layer-3 forwarder/switch controller but every time i run it > i got > > > following error > > > 00042|nox|ERR:bind: Address already in use > > > any ideas? > > > > > > ___ > > > nox-dev mailing list > > > nox-dev noxrepo.org > > > http://noxrepo.org/mailman/listinfo/nox-dev > > > > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" > I'm new to openflow and python so i don't understand it much..:( > when i did "./nox_core -v -i ptcp:6635 pytutorial" > then it made no difference and > when i entred this "./nox_core -v -i ptcp:6635" > then it just got stuck. > > > > ___ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev > -- Aaron O. Rosen Masters Student - Network Communication 306B Fluor Daniel ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
Srini Seetharaman stanford.edu> writes: > > Looks like some other application is already using port 6633. Please > see if there are other NOX processes already running. To use a > different port , please run as follows: "./nox_core -i ptcp:" > > Srini. > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha seecs.edu.pk> wrote: > > Hi! > > i'm coding layer-3 forwarder/switch controller but every time i run it i got > > following error > > 00042|nox|ERR:bind: Address already in use > > any ideas? > > > > ___ > > nox-dev mailing list > > nox-dev noxrepo.org > > http://noxrepo.org/mailman/listinfo/nox-dev > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" I'm new to openflow and python so i don't understand it much..:( when i did "./nox_core -v -i ptcp:6635 pytutorial" then it made no difference and when i entred this "./nox_core -v -i ptcp:6635" then it just got stuck. ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
Re: [nox-dev] 00042|nox|ERR:bind: Address already in use
Looks like some other application is already using port 6633. Please see if there are other NOX processes already running. To use a different port , please run as follows: "./nox_core -i ptcp:" Srini. On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmunt...@seecs.edu.pk> wrote: > Hi! > i'm coding layer-3 forwarder/switch controller but every time i run it i got > following error > 00042|nox|ERR:bind: Address already in use > any ideas? > > ___ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev > ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
[nox-dev] 00042|nox|ERR:bind: Address already in use
Hi! i'm coding layer-3 forwarder/switch controller but every time i run it i got following error 00042|nox|ERR:bind: Address already in use any ideas? ___ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev