Re: [NTG-context] backgrounds
在 2014年10月17日 19:32, Procházka Lukáš Ing. - Pontex s. r. o. 写道: Source result attached. I didn't expect your source even to compile since you missed out the \starttext thing. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Latest beta stops loading some ttc fonts
The following minimal example used to work fine: \starttypescript [serif] [zhfonts] \definefontsynonym [Serif] [name:nsimsun] \stoptypescript \starttypescript [zhfonts] \definetypeface [zhfonts] [rm] [serif] [zhfonts] \stoptypescript \usetypescript [zhfonts] \setupbodyfont [zhfonts, rm, 11pt] \starttext 测试 \stoptext but it's no longer the case. The font used here is 'simsun.ttc' which ships with Chinese edition Windows systems by default. When I require name:nsimsun as above, the TTFAddLangStr() function in the luatex code base will have the following information: fontname lang NSimSun 0 NSimSun 1033 新宋体 2052 That is when lang equals 0 or 1033, the fontname will be NSimSun, but when lang equals 2052, the fontname will be 新宋体, the Chinese words for NSimSun. Although the ValidatePostScriptFontName() complains about the Chinese name of this font, and set 'bad_ps_fontname' to true, luatex itself don't stop the font fromgetting the right fontname NSimSun, since it chooses ASCII names when there're multiple fontnames. But actions[check metadata](font-otf.lua, 1812)，sets the metadata.fontname from the correct NSimSun to bad-fontname-simsun, and this change causes ff_get_ttc_index() to always return -1 as the index, which caused ConTeXt to complain about the following error message before bail out: (bad-fontname-simsun:-1)Invalid TTC index number mtx-context | fatal error: return code: 1 So, maybe font-otf.lua may need not change metadata.fontname and metadata.fullname if these two names are not nil? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Latest beta stops loading some ttc fonts
在 2014年09月25日 18:50, Hans Hagen 写道: On 9/25/2014 10:50 AM, Hongwen Qiu wrote: The following minimal example used to work fine: \starttypescript [serif] [zhfonts] \definefontsynonym [Serif] [name:nsimsun] \stoptypescript \starttypescript [zhfonts] \definetypeface [zhfonts] [rm] [serif] [zhfonts] \stoptypescript \usetypescript [zhfonts] \setupbodyfont [zhfonts, rm, 11pt] \starttext 测试 \stoptext but it's no longer the case. is it context or the binary? Don't know which one changed that caused the above example to fail. I havn't used nsimsun for months, and indeed the above code used to run properly. Just heard from someone that it works in the current but not in the beta. In my opinion, it's much easier to change the context code to fix this problem (about 2 line lua code), but maybe tweaking with the luatex code is the way that should be done. I don't know anything about font format. In the luatex code, a comment said that PLRM only support ASCII fontnames. I suppose PLRM is short for PostScript Language Reference. I have a quick glance of the 3rd edition of PLRM, and only find that fontname have this explanation: (Optional) The name of the font. This entry is for information only; it is not used by the PostScript interpreter. Ordinarily, it is the same as the key passed to definefont , but it need not be. I noticed that font can have multiple fotnames, each for a lang, just as I posted in the previous message that there're 3 fontnames for index 1 of simsun.ttc. And many other Unicode fonts have non ASCII font names for lang other than 0 too. Just enable the warning message when loading font, and I noticed a lot of arabic font in the Linux box have Arabic font names. So I don't think that context (or luatex) should refuse to work when font have non-ASCII fontnames. Currently there're other font related bugs that I'd wish getting fixed too. I'm currently trying to find out why typesetting with sourcehansanscn will cause some glyphs to disapper. e.g. the following code should typeset two glyphs 理 and 论. But the 理 just get deleted from the output. \starttypescript [serif] [zhfonts] \definefontsynonym [Serif] [name:sourcehansanscn] \stoptypescript \starttypescript [zhfonts] \definetypeface [zhfonts] [rm] [serif] [zhfonts] \stoptypescript \usetypescript [zhfonts] \setupbodyfont [zhfonts, rm, 11pt] \starttext 理论 \stoptext FYI. this font can display 理, when I use libreOffice. I have no clue how to debug this problem. So some advice about debugging this kind of problem is helpful if you're busy to debug the problem. I'd glad to find out the reason why it won't work myself. By the way, I belived that something like \definefontsynonym [Serif] [sourcehansanscn] used to load sourcehansanscn correctly but you must prefix it with name: now, otherwise it won't load any font. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] how to change the distance between two words?
On 01/20/2013 12:42 AM, ??? wrote: luatex has not been updated after executing first-setup.sh --keep, what should I do for updating Luatex? Usually, luatex get updated regularly along with ConTeXt updating. If for some reason, you want to use the latest luatex binary, you need to compile it from source code yourself. If you have difficultly compile binary from source, you can ask others to compile for you, or just wait for the binary to eventually come into the ConTeXt repo. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] \subsection produces the wrong result
With ConTeXt version: 2012.07.10 00:56, the following minimal example
produces the wrong result:
\starttext
\section{Section}
\subsection{Subsection} % This generates a section other than a subsection
\stoptext
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Check brackets and parentheses
On 07/06/2012 03:38 PM, Pontus Lurcock wrote:
brace-lint.py
#!/usr/bin/python
import sys
'''Count opening and closing braces in a file.'''
def count(filename, opening, closing):
print opening, closing
f = open(sys.argv[1], 'r')
Shouldn't this line be
f = open(filename, 'r')
otherwise the 'filename' parameter will not be used
braces = 0
i = 1
last_zero = -1
for line in f.readlines():
braces += line.count(opening)
braces -= line.count(closing)
if braces==0: last_zero = i
i += 1
f.close()
print last_zero
count(sys.argv[1], '{', '}')
count(sys.argv[1], '[', ']')
count(sys.argv[1], '\\start', '\\stop')
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] upload
On 07/04/2012 04:56 PM, Hans Hagen wrote:
Hi,
I uploaded a beta. There has been the usual amount of renamings going
on so there might be problems.
Hans
This is broken:
! Undefined control sequence.
system tex error on line 4 in file test.tex: Undefined
control sequence ...
1 \starttext
2 \startformula
3 a
4 \stopformula
5 \stoptext
6
argument vspacing(\p_spaceafter
)
\ctxcommand #1-\directlua \zerocount {commands.#1
}
\spac_vspacing_yes_indeed ...mand {vspacing(#1)}
\fi
\afterdisplayspace ...else \blank [\p_spaceafter ]
\fi
\stopdisplaymath ...ath $$\par \afterdisplayspace
\par \egroup
\strc_formulas_stop_formula ...native \v!formula }
\dostoptagged
\dostoptagge...
l.4 \stopformula
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] The bTABLE is still broken in latest beta
The bTABLE is still broken in latest beta. Minimal example: \starttext \setupTABLE[c][each][width=1cm] \bTABLE \bTR\bTD Test \eTD\eTR \eTABLE \stoptext Error log: ! Missing number, treated as zero. system tex error on line 5 in file test.tex: Missing number, treated as zero ... 1 \starttext 2 \setupTABLE[c][each][width=1cm] 3 \bTABLE 4 \bTR\bTD Test \eTD\eTR 5 \eTABLE 6 \stoptext 7 to be read again \2752:1 argument ...n \tabl_ntb_get_aut \c_tabl_ntb_col \relax \ifdim \localwidth ... \secondoftwoarguments #1#2-#2 \tabl_ntb_cell_process ...\tabl_tnb_cell_finalize }}\scratchdimen \tabl_ntb_... inserted text ...align_start \tabl_ntb_pass 1 1 \tabl_ntb_column_next \tab... \tabl_ntb_flush_content ...p \cr \the \t_tabl_ntb \dostoptagged \egroup \dos... ... l.5 \eTABLE ? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] upload
On 06/20/2012 04:40 AM, Hans Hagen wrote:
I uploaded a version that has the bTABLE mechanism reorganized
(different low level names etc). Hopefully nothing got broken in the
process.
Unfortunately it is broken. Minimal example:
\starttext
\bTABLE
\bTR\bTD[nc=2] r1c1 \eTD\eTR
\bTR\bTD r2c1 \eTD\bTD r2c2 \eTD\eTR
\eTABLE
\stoptext
Error message:
! Missing number, treated as zero.
system tex error on line 6 in file test.tex: Missing
number, treated as zero ...
1 \starttext
2
3 \bTABLE
4 \bTR\bTD[nc=2] r1c1 \eTD\eTR
5 \bTR\bTD r2c1 \eTD\bTD r2c2 \eTD\eTR
6 \eTABLE
7
8 \stoptext
9
to be read again
\relax
\21 ...l_ntb_get_dis \scratchcounter \fi \relax
\advance
\scratchcounter \...
\redorecurse -\expandrecursecontent
\dodorecurse
to be read again
{
inserted text
2
\dodorecurse ... \expandafter {\the \innerrecurse
}{#2}
...
l.6 \eTABLE
?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Is it possible to generate eps files using metafun and context?
On 06/18/2012 04:19 PM, Hans Hagen wrote: and then use pstopdf to turn the pdf into an eps You must mean pdftops, since pstopdf cannot convert pdf files into eps but pdftops can. I tried pdftops, the result quality is high, but since my desire is to provide eps figures to others that have to insert high quality figures into Microsoft Word, the pdftops converted eps files cannot insert into Microsoft Word. Fortunately, I have found out that pstopdf uses ghostscript/Inkscape to do the real job, and I use ghostscript directly to convert pdf into eps, the quality is high enough with the -dNOCACHE option (I had tried inkscape before my last posting a few weeks ago, and the resulting quality is not high enough when I'm using Fedora 16. But it seems that inkscape in Fedora 17 produces better quality now, though ghostscript is better), and it can be recognized by Microsoft Word. Thanks for the information. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Is it possible to generate eps files using metafun and context?
Hi, Is it possible to typeset the label with context and generate eps output files using the metafun format? If yes, then how? TIA. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] localfootnotes broken in latest beta?
Hi,
The following minimal example works fine with context version 2011.05.18
18:04 and luatex version beta-0.70.1-2011061410 (rev 4277) comes along
texlive 2011, but gives error with latest beta (context version
2012.06.13 23:46 and luatex version beta-0.70.2-2012052410 (TeX Live 2012)).
Minimal example:
\starttext
\startlocalfootnotes
Test\footnote{test}
\placelocalfootnotes
\stoplocalfootnotes
\stoptext
Error emitted by latest beta:
! Missing number, treated as zero.
system tex error on line 7 in file test.tex: Missing
number, treated as zero ...
1 \starttext
2
3 \startlocalfootnotes
4 Test\footnote{test}
5 \placelocalfootnotes
6 \stoplocalfootnotes
7
8 \stoptext
9
to be read again
f
\v!fit -f
it
\369footnote ...dimexpr \noteparameter \c!height
*\c_strc_notes_columns \re...
\strc_notes_set_properties ..._notes_set_location
\strc_notes_set_delayed
inserted text ...yed \strc_notes_set_properties
\strc_notes_check_locations
\strc_notes_synchronize ... \everysynchronizenote
...
l.6 \stoplocalfootnotes
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] localfootnotes broken in latest beta?
On 06/15/2012 12:18 PM, Wolfgang Schuster wrote: Use this for the moment: \placelocalfootnotes[height=\textheight] Thanks, this works fine. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Equilibrium in chemical resulted in Undefined Control Sequence error
Hi,
The following minimal example:
==
\starttext
\chemical{A,+,B,-,AB}
\stoptext
==
gives the following error under context version: 2011.10.08 11:42,
luatex version beta-0.70.1-2011051918:
! Undefined control sequence.
system tex error on line 10 in file test.tex: Undefined
control sequence ...
1 \starttext
2
3 \chemical{A,+,B,-,AB}
4
5 \stoptext
6
argument \xrightpverleftarrow
{}{}
\mathematics ...mmode #1\else \normalstartimath #1
\normalstopimath \fi
\@@cm::i:equilibrium ...\xrightpverleftarrow {}{}}
\enspace
l.10 \chemicalequilibrium
\inlinechemical ...emicals.inline(\!!bs #1\!!es )}
}
l.3 \chemical{A,+,B,-,AB}
?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Strange problem related to \usemodule
On Tue, 2011-10-11 at 09:26 +0200, Hans Hagen wrote:
can you try to load the file directly with
\input{/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex}
and see if the command is defined then?
This method works with other modules, e.g. t-ruby.tex, but not
t-vim.tex, I think that's because the vim module depends on other
modules that's still in texmf-modules.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] I look for an item bullet with a size between \bullet and \cdot
On Tue, 2011-10-11 at 14:42 +0200, Stéphane Klein wrote: I don't understand, with this code, you display three bullet. One is really \bullet, the other one is \cdot and than one smaller than \bullet and bigger than \cdot, which is what you want. Personnaly, I would like *one* bullet with a size smaller that \bullet but bigger that \cdot. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Strange problem related to \usemodule
It seems that if I copied all of the module files under the current directory, it works perfectly. And of course mtxrun --locate t-vim.tex gives the correct location just as indicated by my previously attached log file. And there's only one environment variable corresponding to TeX settings: $ env |grep -i TEX PATH=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-linux-64/bin: (It's very long) Actually not only the modules under tex/texmf-modules not work on the Remote, but also modules under tex/texmf-local don't work either. On Mon, 2011-10-10 at 12:57 +0800, Hongwen Qiu wrote: Hi, I have access to three machines both running GNU/Linux x86-64, I call them Laptop, Desktop and Remote respectively here on. The Laptop has full access to the internet, so I always install and upgrade my ConTeXt Standalone on it when I'm home. At workplace, I can surfer the internet with the Desktop while the RSYNC port is blocked. I only can access the Remote through ssh from the Desktop without root privilege and can not access the internet. So, I always copied the ConTeXt standalone from my Laptop onto my Desktop, and from my Desktop onto Remote if necessary. Then, I'll delete the cache before I set the PATH to the appropriate location and run context --make and mtxrun --generate. So the ConTeXt standalones are almost identical on both my Desktop and Remote. And the following minimal example just works fine on my Desktop but failed on the Remote, === Minimal Example \usemodule[vim] \definevimtyping[RUBY][syntax=ruby] \starttext \startRUBY puts Hello \stopRUBY \stoptext = Actually, on Remote, whatever module I use, it will prompt the Undefined Control Sequence error regarding the first command I used from that module with the module loaded correctly. Attached is the error log accompany the above minimal example. So, what can be the problem with my Remote. TIA. for any help. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Strange problem related to \usemodule
On Mon, 2011-10-10 at 14:09 +0200, Hans Hagen wrote:
can you run with \enabletrackers[modules.loading]
Attached is the log with \enabletrackers[modules.loading].
(b.tex
ConTeXt ver: 2011.10.08 11:42 MKIV fmt: 2011.10.10 int: english/english
system cont-new.mkiv loaded
(/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv
system beware: some patches loaded from cont-new.mkiv
)
system b.top loaded
system options start used options
used options % runtime options files (command line driven)
used options \unprotect
used options % feedback and basic job control
used options % handy for special styles
used options \startluacode
used options document = document or { }
used options document.arguments={
used options }
used options document.files={
used options b.tex,
used options }
used options \stopluacode
used options % process info
used options \setupsystem[inputfile=b.tex]
used options \setupsystem[\c!n=1,\c!m=1]
used options % modes
used options % options (not that important)
used options \startsetups *runtime:options
used options \stopsetups
used options % styles and modules
used options \startsetups *runtime:modules
used options \stopsetups
used options % done
used options \protect \endinput
system options stop used options
(b.top)
fontslatin modern fonts are not preloaded
languageslanguage en is active
resolversmodules locating: prefix: '', askedname: 'vim', truename: 'vim'
resolversmodules checking file: 'm-vim.mkvi'
resolversmodules checking file: 'm-vim.mkiv'
resolversmodules checking file: 'm-vim.tex'
resolversmodules checking file: 'm-vim.cld'
resolversmodules checking file: 'm-vim.lua'
resolversmodules checking file: 'p-vim.mkvi'
resolversmodules checking file: 'p-vim.mkiv'
resolversmodules checking file: 'p-vim.tex'
resolversmodules checking file: 'p-vim.cld'
resolversmodules checking file: 'p-vim.lua'
resolversmodules checking file: 's-vim.mkvi'
resolversmodules checking file: 's-vim.mkiv'
resolversmodules checking file: 's-vim.tex'
resolversmodules checking file: 's-vim.cld'
resolversmodules checking file: 's-vim.lua'
resolversmodules checking file: 'x-vim.mkvi'
resolversmodules checking file: 'x-vim.mkiv'
resolversmodules checking file: 'x-vim.tex'
resolversmodules checking file: 'x-vim.cld'
resolversmodules checking file: 'x-vim.lua'
resolversmodules checking file: 'v-vim.mkvi'
resolversmodules checking file: 'v-vim.mkiv'
resolversmodules checking file: 'v-vim.tex'
resolversmodules checking file: 'v-vim.cld'
resolversmodules checking file: 'v-vim.lua'
resolversmodules checking file: 't-vim.mkvi'
resolversmodules checking file: 't-vim.mkiv'
resolversmodules checking file: 't-vim.tex'
resolversmodules loading: '/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex'
resolversmodules loaded: 'vim'
! Undefined control sequence.
system tex error on line 4 in file b.tex: Undefined control sequence ...
1 \enabletrackers[modules.loading]
2 \usemodule[vim]
3
4 \definevimtyping[RUBY][syntax=ruby]
5
6 \starttext
7
8 \startRUBY
9 puts Hello
10 \stopRUBY
11
12 \stoptext
13
l.4 \definevimtyping
[RUBY][syntax=ruby]
? X
system files start used files
used files 1: filename=mult-mps.lua | filetype=tex | format=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/mult-mps.lua | usedmethod=database
used files 2: filename=b.tex | foundname=b.tex | usedmethod=direct
used files 3: filename=cont-new.mkiv | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv | usedmethod=database
used files 4: filename=b.top | foundname=b.top | usedmethod=direct
used files 5: filename=lang-us.lua | filetype=lua | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/patterns/lang-us.lua | usedmethod=database
used files 6: filename=t-vim.tex | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex | usedmethod=database
system files stop used files
system structure start used structure
used structure text: b
system structure stop used structure
mkiv lua stats used config file - selfautoparent:texmf/web2c/texmfcnf.lua
mkiv lua stats used cache path -
Re: [NTG-context] Strange problem related to \usemodule
On Mon, 2011-10-10 at 23:09 -0400, Aditya Mahajan wrote:
What are the first 10-15 lines of
/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex?
$ head
-15
/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex
%D \module
%D [ file=t-vim,
%D version=2011.09.03,
%Dtitle=\CONTEXT\ User Module,
%D subtitle=Vim syntax highlighting,
%D author=Aditya Mahajan,
%D date=\currentdate,
%Dcopyright=Aditya Mahajan,
%Demail=adityam at ieee dot org,
%D license=Simplified BSD License]
\writestatus{loading}{Vim syntax highlighting (ver: 2011.09.03)}
\startmodule[vim]
\usemodule [filter]
The vim module usually gives a message
loadingVim syntax highlighting
(or some variation of it...I have changed the default message
recently),
but that message is missing in your log.
My guess is that the t-vim module that you have is somehow corrupted,
and
therefore, \definevimtyping command is undefined.
This couldn't be the problem (anyhow, I attached the 15 lines of
t-vim.tex above), since I have said in my previous messages that if I
copied the neccessary files from the tex/texmf-modules to the current
directory it works just fine, and the problem are not only relates to
t-vim module, all of the modules under tex/texmf-modules and
tex/texmf-local just does not work.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] Strange problem related to \usemodule
Hi,
I have access to three machines both running GNU/Linux x86-64, I call
them Laptop, Desktop and Remote respectively here on.
The Laptop has full access to the internet, so I always install and
upgrade my ConTeXt Standalone on it when I'm home.
At workplace, I can surfer the internet with the Desktop while the
RSYNC port is blocked.
I only can access the Remote through ssh from the Desktop without
root privilege and can not access the internet.
So, I always copied the ConTeXt standalone from my Laptop onto my
Desktop, and from my Desktop onto Remote if necessary. Then, I'll
delete the cache before I set the PATH to the appropriate location and
run context --make and mtxrun --generate.
So the ConTeXt standalones are almost identical on both my Desktop and
Remote. And the following minimal example just works fine on my
Desktop but failed on the Remote,
=== Minimal Example
\usemodule[vim]
\definevimtyping[RUBY][syntax=ruby]
\starttext
\startRUBY
puts Hello
\stopRUBY
\stoptext
=
Actually, on Remote, whatever module I use, it will prompt the
Undefined Control Sequence error regarding the first command I used from
that module with the module loaded correctly. Attached is the error log
accompany the above minimal example.
So, what can be the problem with my Remote.
TIA. for any help.
(b.tex
ConTeXt ver: 2011.10.08 11:42 MKIV fmt: 2011.10.10 int: english/english
system cont-new.mkiv loaded
(/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv
system beware: some patches loaded from cont-new.mkiv
)
system b.top loaded
system options start used options
used options % runtime options files (command line driven)
used options \unprotect
used options % feedback and basic job control
used options % handy for special styles
used options \startluacode
used options document = document or { }
used options document.arguments={
used options }
used options document.files={
used options b.tex,
used options }
used options \stopluacode
used options % process info
used options \setupsystem[inputfile=b.tex]
used options \setupsystem[\c!n=1,\c!m=1]
used options % modes
used options % options (not that important)
used options \startsetups *runtime:options
used options \stopsetups
used options % styles and modules
used options \startsetups *runtime:modules
used options \stopsetups
used options % done
used options \protect \endinput
system options stop used options
(b.top)
fontslatin modern fonts are not preloaded
languageslanguage en is active
resolversmodules loaded: 'vim'
! Undefined control sequence.
system tex error on line 3 in file b.tex: Undefined control sequence ...
1 \usemodule[vim]
2
3 \definevimtyping[RUBY][syntax=ruby]
4
5 \starttext
6
7 \startRUBY
8 puts Hello
9 \stopRUBY
10
11 \stoptext
12
l.3 \definevimtyping
[RUBY][syntax=ruby]
? X
system files start used files
used files 1: filename=mult-mps.lua | filetype=tex | format=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/mult-mps.lua | usedmethod=database
used files 2: filename=b.tex | foundname=b.tex | usedmethod=direct
used files 3: filename=cont-new.mkiv | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/base/cont-new.mkiv | usedmethod=database
used files 4: filename=b.top | foundname=b.top | usedmethod=direct
used files 5: filename=lang-us.lua | filetype=lua | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-context/tex/context/patterns/lang-us.lua | usedmethod=database
used files 6: filename=t-vim.tex | filetype=tex | foundname=/ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-modules/tex/context/third/vim/t-vim.tex | usedmethod=database
system files stop used files
system structure start used structure
used structure text: b
system structure stop used structure
mkiv lua stats used config file - selfautoparent:texmf/web2c/texmfcnf.lua
mkiv lua stats used cache path - /ifs2/S2PH/qiuhw/opt/context-1008/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606
mkiv lua stats resource resolver - loadtime 0.016 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 6 found files, scanned paths:
mkiv lua stats stored bytecode data - 295 modules, 63 tables, 358 chunks
mkiv lua stats cleaned up reserved nodes - 32 nodes, 9 lists of 424
mkiv lua stats node memory usage - 18 glue_spec, 1 dir
mkiv lua stats node list callback tasks - 6 unique task lists, 1 instances (re)created, 104 calls
mkiv lua stats used
Re: [NTG-context] Captions
On 09/23/2011 06:10 AM, Felix Ingram wrote: I'm defining a new float that I'd like to caption with its own label. Something like: \definefloat[picture][pictures] I'd then like the caption to read: Picture 1 - my caption text Picture 2 - etc At the moment I've used \setupcaption[picture][way=bytext] to sort out the numbering but I cannot figure out how to do the label. \setupcaption[picture][way=bytext,label=Picture] does the trick ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Setup of the title of Contents
On 09/13/2011 04:48 PM, Honza Hejzl wrote: I wish I were able to set tup my custom title (for example, for table of contents). I have chapter titles split over two lines and with different sizes so I need something different as a title of Contents. I know about many possibilities of \setuplist options but can't find anything about changing the title style. It seems the basic style is simply derived from the chapter title style. Use \placetableofcontents instead of \completetableofcontents and generate the title with your customized title command. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] \startalign[n=3] don't work properly in MKIV
Hi, the following minimal example works fine in MKII, but the third columns are not aligned in MKIV \starttext \startformula\startalign[n=3] \NC X \NC = 1 + 2 \NC = 3 \NR \NC Y \NC = 1 + 2 + 3 \NC = 6 \NR \NC Z \NC = 1 + 2 + 3 + 4 \NC = 10 \NR \stopalign\stopformula \stoptext Is this a bug or the interface has changed in MKIV? $ context --version mtx-context | current version: 2011.09.06 17:46 $ luatex --version This is LuaTeX, Version beta-0.70.1-2011051918 (rev 4277) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] about the line break after \inframed
On 02/22/2011 09:58 PM, Jeong Dalyoung wrote:
\startuseMPgraphic{lions b}
picture pic;
path p ; p := fullsquare xyscaled (\overlaywidth,\overlayheight) randomized 5pt
;
pickup pencircle scaled 1pt ;
fill p withcolor .850yellow ;
draw p withcolor .5yellow ;
\stopuseMPgraphic
\defineoverlay[leopard][\uniqueMPgraphic{lions b}]
\def\nota#1 {\inframed[frame=off,background=leopard]{#1}}
\starttext
\nota{test 1:} This is a test for line separation.
%\midaligned{\nota{test 2}}
\stoptext
Change the definition of \nota, and it just works:
\startuseMPgraphic{lions b}
picture pic;
path p ; p := fullsquare xyscaled (\overlaywidth,\overlayheight)
randomized 5pt ;
pickup pencircle scaled 1pt ;
fill p withcolor .850yellow ;
draw p withcolor .5yellow ;
\stopuseMPgraphic
\defineoverlay[leopard][\uniqueMPgraphic{lions b}]
\define[1]\nota {\dontleavehmode\inframed[frame=off,background=leopard]{#1}}
\starttext
\nota{test 1:} This is a test for line separation.
\midaligned{\nota{test 2}}
\stoptext
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] metapost fill between outlines
On 02/21/2011 05:09 PM, Reviczky, Adam wrote: The only letter (g) I have left in the logo has two spaces that I want to cut out. I can't make a single path out of it so that it doesn't go through the entire letter, so what to do in this case? Can't you construct four outlines instead of three, so that you can construct two paths for filling. Hope you understand what I mean. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] metapost fill between outlines
On 02/20/2011 04:25 PM, Reviczky, Adam wrote: As a workaround I fill out the bigger one with color black and the smaller one with color white, but I need to put this on different background colors, so the use of this is very limited. You can fill out the bigger one, than clips the smaller one. And alternately, you can construct the path of the difference out of the two circles, and fill the constructed path. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] metapost fill between outlines
On 02/21/2011 03:52 AM, Reviczky, Adam wrote: As for the path of the difference, how do you mean that? Example? \startMPpage path p ; p := fullcircle scaled 1cm ; path q ; q := fullcircle scaled .5cm ; path r ; r := p -- reverse q -- cycle ; drawarrow r withcolor green ; fill r withcolor red ; \stopMPpage This works here. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] metapost fill between outlines
On 02/21/2011 01:12 PM, Reviczky, Adam wrote:
\starttext
\framed[background=color,backgroundcolor=red,height=fit,width=fit]{
\startMPcode
path p[];
p1 := (6.949220,13.046900)..controls (9.539060,13.046900) and
(10.023400,10.781200)..(10.023400,8.679690)..controls (10.023400,5.335940) and
(6.949220,0.00)..(3.234380,0.00)..controls (0.890625,0.00) and
(0.00,1.886720)..(0.00,3.828120)..controls (0.00,8.492190) and
(3.316410,13.046900)..(6.949220,13.046900) --cycle;
p2 := (7.488280,12.293000)..controls (4.933590,12.293000) and
(1.265620,6.226560)..(1.265620,2.531250)..controls (1.265620,1.562500) and
(1.695310,0.835938)..(2.722660,0.835938)..controls (5.230470,0.835938) and
(8.972660,7.035160)..(8.972660,10.296900)..controls (8.972660,11.269500) and
(8.703120,12.293000)..(7.488280,12.293000)--cycle;
p3 := p1 -- reverse p2 -- cycle;
fill p3 withcolor black;
\stopMPcode
}
\stoptext
%%%
This doesn't work.
\starttext
\framed[background=color,backgroundcolor=red,height=fit,width=fit]{
\startMPcode
path p[];
p1 := (6.949220,13.046900)..controls (9.539060,13.046900) and
(10.023400,10.781200)..(10.023400,8.679690)..controls
(10.023400,5.335940) and
(6.949220,0.00)..(3.234380,0.00)..controls (0.890625,0.00)
and (0.00,1.886720)..(0.00,3.828120)..controls
(0.00,8.492190) and (3.316410,13.046900)..(6.949220,13.046900) --cycle;
p2 := (7.488280,12.293000)..controls (4.933590,12.293000) and
(1.265620,6.226560)..(1.265620,2.531250)..controls (1.265620,1.562500)
and (1.695310,0.835938)..(2.722660,0.835938)..controls
(5.230470,0.835938) and
(8.972660,7.035160)..(8.972660,10.296900)..controls (8.972660,11.269500)
and (8.703120,12.293000)..(7.488280,12.293000)--cycle;
drawarrow p1 withcolor green ;
drawarrow p2 withcolor blue ;
p3 := p1 -- p2 -- cycle;
fill p3 withcolor black;
\stopMPcode
}
\stoptext
Maybe you can know why now, from the above code. The direction of the
path is important.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] metapost fill between outlines
On 02/21/2011 02:41 PM, Reviczky, Adam wrote:
but for this example it draws a small line through the letter:
\starttext
\framed[background=color,backgroundcolor=red,height=fit,width=fit]{
\startMPcode
path db[],df[],dc[];
drawoptions (withcolor (0.00,0.329412,0.560784));
db1 := (86.812500,0.519531)--(92.457001,0.519531)--(92.457001,32.386700)
--(86.812500,32.386700)--(86.812500,19.679701)--(86.722702,19.679701)
..controls (85.390602,21.589800) and
(82.816399,22.718800)..(79.929703,22.718800)
..controls (73.976601,22.718800) and
(69.800797,17.253901)..(69.800797,11.617200)
..controls (69.800797,4.683590) and
(73.664101,0.00)..(79.484398,0.00)
..controls (82.949203,0.00) and
(85.257797,1.820310)..(86.722702,3.640620)
--(86.812500,3.640620)--cycle;
df1 := (81.437500,19.246099)..controls (84.992203,19.246099) and
(86.812500,15.734400)..(86.812500,11.964800)
..controls (86.812500,7.625000) and
(85.128899,3.464840)..(81.171898,3.464840)
..controls (77.753899,3.464840) and
(76.062500,7.542970)..(76.062500,11.746100)
..controls (76.062500,15.953100) and
(77.621101,19.246099)..(81.437500,19.246099)
--cycle;
dc1 := db1 -- df1 -- cycle;
fill dc1;
drawdot (86.812500,0.519531) withcolor blue withpen pencircle scaled 2pt;
drawdot (81.437500, 19.246099) withcolor green withpen pencircle scaled 2pt;
drawarrow db1 withcolor green; drawarrow df1 withcolor blue;
drawarrow dc1 withcolor white;
\stopMPcode
}
\stoptext
The above code is just intend to tell you that you can change the way
you construct db1 and df1 to achieve your desired results. The actual
changes necessary to this example are not given.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] [BUG] \placepublications[criterium=all] triggers error in ConTeXt 2010.09.29
Please see the attached minimal example and its error log.
\placepublications[criterium=all] triggers error in ConTeXt 2010.09.29.
It works fine in ConTeXt 2010.09.24.
Both the luatex versions are beta-0.63.0-2010091123.
@unpublished{test,
title={Test},
author={test},
journal={Test},
year=2010,
month=9,
day=29,
}
sorters using sort sequence: mm mc uc
(test.tex
ConTeXt ver: 2010.09.29 15:00 MKIV fmt: 2010.9.29 int: english/english
system : cont-new loaded
(/home/qiuhw/context/tex/texmf-context/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex
(/home/qiuhw/context/tex/texmf-context/tex/context/base/cont-new.mkiv))
system : cont-fil loaded
(/home/qiuhw/context/tex/texmf-context/tex/context/base/cont-fil.tex
loading : ConTeXt File Synonyms
)
system : cont-sys.rme loaded
(/home/qiuhw/context/tex/texmf-context/tex/context/user/cont-sys.rme
(/home/qiuhw/context/tex/texmf-context/tex/context/base/type-def.mkiv)
(/home/qiuhw/context/tex/texmf-context/tex/context/base/type-lua.mkiv)
(/home/qiuhw/context/tex/texmf-context/tex/context/base/type-siz.mkiv)
(/home/qiuhw/context/tex/texmf-context/tex/context/base/type-otf.mkiv))
system : cont-err loaded
(/home/qiuhw/context/tex/texmf-context/tex/context/base/cont-err.tex
systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead
)
system : test.top loaded
%
% begin of optionfile
%
% % runtime options files (command line driven)
% \unprotect
% % feedback and basic job control
% % handy for special styles
% \startluacode
% document = document or { }
% document.arguments={
% }
% document.files={
%test,
% }
% \stopluacode
% % process info
% \setupsystem[inputfile=test]
% \setupsystem[\c!n=1,\c!m=1]
% % modes
% % options (not that important)
% \startsetups *runtime:options
% \setupoutput[pdftex]
% \stopsetups
% % styles and modules
% \startsetups *runtime:modules
% \stopsetups
% % done
% \protect \endinput
%
% end of optionfile
%
(test.top)
fonts : preloading latin modern fonts
{/home/qiuhw/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/home/qiuhw/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map}{/home/qiuhw/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map}
bodyfont: 12pt rm is loaded
language: language en is active
publications: wrote a new auxiliary file cont-en.aux
publications: loading formatting style from bxml-apa
(/home/qiuhw/context/tex/texmf-context/tex/context/base/bxml-apa.mkiv)
systems : begin file test at line 3
! LuaTeX error ...text/tex/texmf-context/tex/context/base/strc-lst.lua:195: bad
argument #1 to 'gsub' (string expected, got nil)
stack traceback:
[C]: in function 'gsub'
...text/tex/texmf-context/tex/context/base/strc-lst.lua:195: in
function ...text/tex/texmf-context/tex/context/base/strc-lst.lua:192
(tail call): ?
...text/tex/texmf-context/tex/context/base/strc-lst.lua:392: in
function 'analyze'
main ctx instance:1: in main chunk.
system error on line 5 in file test.tex: LuaTeX error ...
1 \setupbibtex[database=test]
2
3 \starttext
4 \cite[test]
5 \placepublications[criterium=all]
6 \stoptext
\analyzestructurelist analyze(#1,#2,#3)}
\dodeterminelistcharacteristics ...ter \c!number }
\xdef \utilitylistlength {...
to be read again
\initializepubslist
\dodoplacepublications ...ubs]\initializepubslist
\doifnot {\namedlistparame...
l.5 \placepublications[criterium=all]
? X
mkiv lua stats : used config file -
/home/qiuhw/context/tex/texmf/web2c/texmfcnf.lua
mkiv lua stats : used cache path -
/home/qiuhw/context/tex/texmf-cache/luatex-cache/context/3525c3c2a591596c39048524c75fec75
mkiv lua stats : input load time - 0.047 seconds
mkiv lua stats : stored bytecode data - 239 modules, 56 tables, 295 chunks
mkiv lua stats : cleaned up reserved nodes - 30 nodes, 9 lists of 411
mkiv lua stats : node memory usage - 1 hlist, 3 glue, 1 penalty, 10
glyph, 6 attribute, 20 glue_spec, 2 attribute_list, 1 temp, 1 local_par, 1 dir
mkiv lua stats : node list callback tasks - 6 unique task lists, 1 instances
(re)created, 281 calls
mkiv lua stats : used backend - pdf (backend for directly
generating pdf output)
mkiv lua stats : loaded patterns - en::2
mkiv lua stats : callbacks - direct: 369, indirect: 4462,
total: 4831
mkiv lua stats : result saved in file - test.pdf
mkiv lua stats : loaded fonts - 33 files:
[NTG-context] problem with tabulate header and footer
\setuptabulate[footer=repeat] has no effect, so is this a bug or if
something has been changed?
And \setuptabulate[header=repeat] can only repeat a single row(see the
minimal example below). So is this a bug or is it never been implemented
or thought like this?
TIA for any help or feedback.
Minimal example:
\starttext
\setuptabulate[header=repeat, footers=repeat]
\starttabulatehead
\HL
\NC A \NC B \NC C \NC \NR
\NC D \NC E \NC F \NC \NR
\HL
\stoptabulatehead
\starttabulatetail
\HL
\stoptabulatetail
\startluacode
context.starttabulate{|c|c|c|}
for i=1,200 do
context.NC() context(G)
context.NC() context(H)
context.NC() context(I)
context.NC() context.NR()
end
context.stoptabulate()
\stopluacode
\stoptext
The example and its output are attached.
tabulate.pdf
Description: Adobe PDF document
tabulate.tex
Description: TeX document
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] \big has no effect in Mkiv with opentype math fonts
\big \bigg \Big and \Bigg has no effect in Mkiv with opentype math fonts. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] [xits] \sqrt not work properly
The \sqrt is not work properly in Mkiv. The following is the minimal
example, and the result is attached
\setupbodyfont[xits]
\starttext
\startformula
\sqrt{abcde}
\stopformula
\stoptext
math.pdf
Description: Adobe PDF document
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] pdf file not found
于 2010年09月10日 20:25, Peter Münster 写道:
Hello,
Can anybody reproduce the following problem (Taco can't ...):
No problem here.
\startbuffer[pdf-pages]
\starttext
page 1 \page page 2
\stoptext
\stopbuffer
\savebuffer[pdf-pages][pdf-pages.tex]
\executesystemcommand{context pdf-pages; mkdir testdir;
mv pdf-pages.pdf testdir/2*8.pdf}
\starttext
\setupexternalfigures[directory={./testdir}]
\externalfigure[2*8][page=2]
\stoptext
- !LuaTeX error: PDF inclusion: required page2 does not exist
No problem with page=1.
No problem with other name for pdf-file (for example pdftest.pdf
instead of 2*8.pdf).
No problem, if pdf-file is in current directory instead of testdir.
My system is latest minimals on linux-amd64.
Latest minimals on linux i386.
Cheers, Peter
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] table row span question
于 2010年08月26日 12:42, Martin Althoff 写道: \DC \DL \DL \DL \DR As far as I know, this should be written as \DC \DL[3] \DR ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] sharp (#) and flat (b) signs
于 2010年08月19日 20:29, Vyatcheslav Yatskovsky 写道: Currently I use F\#m7b5 sequence, but # and b symbols look unnatural, I want real ones. You can use \sharp and \flat. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] PDF's generated by XeTeX and LuaTeX, font licensing
于 2010年08月17日 15:30, Giulio Bertellini 写道: What exactly does it mean to subset the fonts, when the fonts are included in a PDF? Just included the used characters, not the whole font file. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Roman page numbers
于 2010年08月13日 00:21, Wolfgang Schuster 写道: Should be \setupuserpagenumber. Thanks, this works. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] an issue with line numbers in the verbatim text
On 08/11/2010 08:23 PM, Li Yanrui (李延瑞) wrote: Hi all, this is an example. \setuptyping[numbering=line] \setuplinenumbering[location=intext] \showframe \starttext \starttyping This is the first line. Last line after an empty line. \stoptyping \stoptext the linenumbering setup of location=intext can not work. the line numbers still be inmargin. Not location=intext, but location=text will do. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Roman page numbers
Hi,
The following minimal example has no effect on page numbering(MkIV):
\setuppagenumbering[conversion=romannumerals] %
\setuppagenumbering[numberconversion=romannumerals] has no effect too.
\starttext
\chapter{Alpha}
\input tufte
\stoptext
$ context --version
MTXrun | current version: 2010.08.10 17:14
$ luatex --version
This is LuaTeX, Version beta-0.61.0-2010072816
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] Roman page numbers
于 2010年08月12日 11:08, Wolfgang Schuster 写道: Am 12.08.10 03:52, schrieb Hongwen Qiu: Hi, The following minimal example has no effect on page numbering(MkIV): \setuppagenumbering[conversion=romannumerals] % \setuppagenumbering[numberconversion=romannumerals] has no effect too. \setupuserpagenumbering[numberconversion=romannumerals] Thanks for the reply, but I get the following error: ! Undefined control sequence. l.10 \setupuserpagenumbering [numberconversion=romannumerals] ? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Problems using new beta
于 2010年06月07日 16:37, Ivo Solnický 写道: On Sunday, after I installed new package, I realized, that my workflow is broken. The ConTeXt beta was broken, and it should work now. So, you may need to upgrade the whole. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] 3. Re: \MPpos, pxy, initialize_box(), oh my! (Hongwen Qiu)
? 2010?06?05? 10:56, Adam Fuller ??:
my initial post had a mistake: i meant to refer to the /Metafun/
manual, not the Metapost manual. that probably didn't help.
Actually, I know that you mean the /Metafun/ manual.
i guess what i should have said is, i know that pxy can give me the
bounding /box/ (the rectangle with the maximum horizontal and vertical
extents of its contents, be they set in horizontal or vertical mode),
but can it give me the subset of that, the bounding /path/, if you
will, when the contents are text which flows over several lines. the
bounding /path/ may not be rectangular, although it will be something
like the union of the bounding boxes of the text's individual lines.
So now, I understand what mean.
i think if you look at the correct reference, the difference of the
effects is clear. i think the challenge is that you don't know where
the line breaks will occur until you typeset it. --adam
And the source code from the manual may help you:
\setupMPvariables[mpos:box][linecolor=darkred]
\setupMPvariables[mpos:par][linecolor=darkred]
\startpositionoverlay{backgraphics}
\setMPpositiongraphic{A-3}{mpos:box}{self=A-3}
\setMPpositiongraphic{A-4}{mpos:box}{self=A-4}
\setMPpositiongraphic{b:A-5}{mpos:par}{self=A-5}
\setMPpositiongraphic{b:A-6}{mpos:par}{self=A-6}
\stoppositionoverlay
\fpos {A-5} Because the text must be laid on top of
the graphic, the graphic must precede the first word in the
typeset stream or it must be positioned on a separate layer.
In the latter case it can be calculated directly after the
paragraph is typeset, but in the former case a second pass
is needed. \tpos {A-5}
Given the above code, I think you can get some information about the
horizontal and vertical pos of texts from \fpos and \tpos. And the
mpos:par is defined in anch-pgr.mkii and anch-pgr.mkiv. But I haven't
dig into the code which implement mpos:par. Hope you can find useful
information there.
And hope the following message I just searched out will help you too:
http://archive.contextgarden.net/message/20080107.024554.314d9fee.ca.html
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] \MPpos, pxy, initialize_box(), oh my!
于 2010年06月04日 23:41, Adam Fuller 写道: initialize_box sets `pxy' to \hpos's contents bounding box. what if you want pxy to be not strictly a rectangle, but the path that encloses text, etc., which is just part of flowing text in a paragraph If I'm not misunderstanding some concepts, bounding boxes are sure to be rectangles. But why you need `pxy` to not be rectangle. Since you can get the center and all the four-corner cordinates (and so it's easy to get the diameter if you want to use it as circles or something like that latter) of the bounding box, you can construct all kinds of path shapes if needed. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Color tables in MKIV
Hi!
There's an example at
http://wiki.contextgarden.net/Table#Background_Colors about color tables.
I found that \BL and \CL works fine in MKII.
Since I get black background for \BL(which is not gray) and get the
following error for \CL in MKIV:
! Missing \endgroup inserted.
inserted text
\endgroup
to be read again
\endtemplate
template \endtemplate
\normalTABLEmultirule #1-
\use {#1}\normalTABLElongrule
\dodocomplexTableGL ...LEmultirule {#3}}\fi \next
\doPostTableGL #2
\TABLEgrayline -\complexTableCOLOR [2,green]
\SR
...
l.12 \NC
\tex{AR} \NC automatic row\NC\SR
Is there a easy way to achive this in MKIV?
Thanks in advance.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] Running standalone metapost file omits spaces between btex and etex
I found that the following example
\starttext
\startuseMPgraphic{test}
draw btex some text with space etex;
\stopuseMPgraphic
\useMPgraphic{test}
\stoptext
can generate the text between btex and etex correct no matter I use
MKII or MKIV.
But, when I running the following example
beginfig(0);
draw btex some text with space etex;
endfig;
end
with the command line:
$ mpost --mem=metafun test.mp
or
$ texexec --mptex test.mp
It dose generate output. But the output omits all the spaces between
btex and etex, with the resulting string to be sometextwithspace.
So, the question is how to get the correct results when running
standalong metapost file with btex-etex strings.
Thanks.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] \setuptyping[numbering=line] don't emit line numbers
$ context --version MTXrun | current version: 2010.04.16 21:08 $ luatex --version This is LuaTeX, Version beta-0.60.0-2010040422 I found that \setuptyping[numbering=line] no longer produces line numbers any more. So are there something changed, or just it's ought to be ok? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] hyphens in verbatim text
于 2010年04月07日 16:12, Hans Hagen 写道:
looks ok here, so example needed
I found that the problem can only be produced when using the simplefonts
module, while loading the adobesongstd font and some other Chinese
fonts. So, the problem maybe something's wrong with the simplefonts
module. The following is a simple example.
\usemodule[simplefonts]
\setcjkmainfont[adobesongstd]
\starttext
\starttyping
--
\stoptyping
\type{--}
\stoptext
And if I use \setmainfont[some Western Fonts] instead of the
\setcjkmainfont line, the problem still exists.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] hyphens in verbatim text
于 2010年04月08日 07:14, Wolfgang Schuster 写道: Add '\setmonofont[Latin Modern Mono][features=none]' to your file. Yes, this works. Tanks. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] hyphens in verbatim text
-- in verbatim text displayed as a single -, no matter in \type{} or in
typing environment or something like that.
current version: 2010.03.30 18:56
$ luatex --version
This is LuaTeX, Version beta-0.60.0-2010040422
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
[NTG-context] tab disappears in LUA environment.
\startLUA string.format(%s %d, person, total) \stopLUA produces the result as following: string.format(%s%d, person, total) while the following code has no such problem: \starttyping string.format(%s %d, person, total) \stoptyping $ context --version MTXrun | current version: 2010.03.30 18:56 $ luatex --version This is LuaTeX, Version beta-0.60.0-2010040422 ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] standardmakeup environment didn't work in MKIV
Hi all,
standardmakeup didn't work in MKIV.
When I used this environment, It complains:
error: Invalid field id writable for node type glue_spec (0)
.
\stopmakeup ...ter \c!color }{\stopcolor }\egroup
\flushmarks \doflushmakeup...
l.3 \stopstandardmakeup
So, is this something deprecated or just some unexpected things
happened? And what I supposed to do if I want to get the same results?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___
Re: [NTG-context] standardmakeup environment didn't work in MKIV
于 2010年03月31日 14:43, Taco Hoekwater 写道: This means your luatex is older than it should be for the current mkiv beta. The 'writable' glue_spec field was introduced in luatex 0.52. It works now. Thanks. I thought that the luatex shipped with the latest ConTeXt was the latest beta. Now I know that it is just the stable one. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
