[old-chevy-truck] Re: Engine Stand Needed
I have a good 3 legged stand, and have had no trouble with it. It's an older Walker brand, so it's built stout. One thing you do need to watch out for though, is your 292 or any inline 6 leverages the weight out farther than a v8, so it puts a lot of strain on the head of the engine stand. I don't think the cheap ones will hold up for any length of time with an inline hanging on them. My son had a jeep six on his good stand, and it sagged down at the outer end. Just be careful! And if you go the cheap route, definitely get the 4 legs. --- In old-chevy-truck@yahoogroups.com, Karl Eastman drbogus2@... wrote: Stay away from the 3 legged engines stands!!! Buy a decent one, getting injured because you cheaped out is not good logic. When you are done with it, put it for sale on www.craigslist.org and you will get most of your money back. It may go against logic, but I see some engine stands for sale in the auto parts category and that is where I would list it. You may even find one on craigslist right now cheap. Good Luck. From: Nate vwnate1@... To: old-chevy-truck@yahoogroups.com Sent: Monday, January 16, 2012 9:34 AM Subject: [old-chevy-truck] Re: Engine Stand Needed  Thank you Dennis ; I looked there and found a decent four point one for $59 , I was hoping to spend less that that as this is , I hope , a one time need . I'll discard or return it when I finish the job ov overhauling the 292 CID L6 thinwall engine I just bought for my '69 C/10 . Used , I see them @ Auto Swaps for $25 all the time but now I need it and the Auto Swap isn't for a while... -Nate Dennis wrote: Nate, don't travel too far, Harbor Freight has them from $55. Dennis McGillis 1953 3100 [Non-text portions of this message have been removed] Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [old-chevy-truck] Re: Engine Stand Needed
I would like to revise my earlier statement. If you have an older, Quality made stand from back in the days when they were built for Quality, not quantity...then that is the only way I would use a 3 legged stand. From: twowheeler63 twowheele...@yahoo.com To: old-chevy-truck@yahoogroups.com Sent: Tuesday, January 17, 2012 10:46 AM Subject: [old-chevy-truck] Re: Engine Stand Needed I have a good 3 legged stand, and have had no trouble with it. It's an older Walker brand, so it's built stout. One thing you do need to watch out for though, is your 292 or any inline 6 leverages the weight out farther than a v8, so it puts a lot of strain on the head of the engine stand. I don't think the cheap ones will hold up for any length of time with an inline hanging on them. My son had a jeep six on his good stand, and it sagged down at the outer end. Just be careful! And if you go the cheap route, definitely get the 4 legs. --- In old-chevy-truck@yahoogroups.com, Karl Eastman drbogus2@... wrote: Stay away from the 3 legged engines stands!!! Buy a decent one, getting injured because you cheaped out is not good logic. When you are done with it, put it for sale on www.craigslist.org and you will get most of your money back. It may go against logic, but I see some engine stands for sale in the auto parts category and that is where I would list it. You may even find one on craigslist right now cheap. Good Luck. From: Nate vwnate1@... To: old-chevy-truck@yahoogroups.com Sent: Monday, January 16, 2012 9:34 AM Subject: [old-chevy-truck] Re: Engine Stand Needed  Thank you Dennis ; I looked there and found a decent four point one for $59 , I was hoping to spend less that that as this is , I hope , a one time need . I'll discard or return it when I finish the job ov overhauling the 292 CID L6 thinwall engine I just bought for my '69 C/10 . Used , I see them @ Auto Swaps for $25 all the time but now I need it and the Auto Swap isn't for a while... -Nate Dennis wrote: Nate, don't travel too far, Harbor Freight has them from $55. Dennis McGillis 1953 3100 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[old-chevy-truck] Re: Engine Stand Needed
THANK YOU for the safety reminders guys ! . I'm well aware of the increased tipover point caused by l o n g engines . -Nate twowheeler63 (I forget your name) wrote: I have a good 3 legged stand, and have had no trouble with it. It's an older Walker brand, so it's built stout. One thing you do need to watch out for though, is your 292 or any inline 6 leverages the weight out farther than a v8, so it puts a lot of strain on the head of the engine stand. I don't think the cheap ones will hold up for any length of time with an inline hanging on them. My son had a jeep six on his good stand, and it sagged down at the outer end. Just be careful! And if you go the cheap route, definitely get the 4 legs. --- In old-chevy-truck@yahoogroups.com, Karl Eastman drbogus2@ wrote: Stay away from the 3 legged engines stands!!! Buy a decent one, getting injured because you cheaped out is not good logic. When you are done with it, put it for sale on www.craigslist.org and you will get most of your money back. It may go against logic, but I see some engine stands for sale in the auto parts category and that is where I would list it. You may even find one on craigslist right now cheap. Good Luck. Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [old-chevy-truck] Re: Engine Stand Needed
Funny story...I came home one day years ago with 4 new Lincoln (The welder company) jack stands. My wife said...oh my god, how much did they cost? I said over a hundred dollars a piece. She said you spent over $400.00 on those? I said yep, if my life isn't worth protecting for $400.00 to keep myself safe when workling on my toys, then I am done listening to your opinion. Divorce proceedings went well,but...I still have all my toys, and am still in one piece. Protecting myself has always been worth the arguement. Happy Rebuilding. From: Nate vwna...@yahoo.com To: old-chevy-truck@yahoogroups.com Sent: Tuesday, January 17, 2012 12:46 PM Subject: [old-chevy-truck] Re: Engine Stand Needed THANK YOU for the safety reminders guys ! . I'm well aware of the increased tipover point caused by l o n g engines . -Nate twowheeler63 (I forget your name) wrote: I have a good 3 legged stand, and have had no trouble with it. It's an older Walker brand, so it's built stout. One thing you do need to watch out for though, is your 292 or any inline 6 leverages the weight out farther than a v8, so it puts a lot of strain on the head of the engine stand. I don't think the cheap ones will hold up for any length of time with an inline hanging on them. My son had a jeep six on his good stand, and it sagged down at the outer end. Just be careful! And if you go the cheap route, definitely get the 4 legs. --- In old-chevy-truck@yahoogroups.com, Karl Eastman drbogus2@ wrote: Stay away from the 3 legged engines stands!!! Buy a decent one, getting injured because you cheaped out is not good logic. When you are done with it, put it for sale on www.craigslist.org and you will get most of your money back. It may go against logic, but I see some engine stands for sale in the auto parts category and that is where I would list it. You may even find one on craigslist right now cheap. Good Luck. [Non-text portions of this message have been removed] Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[old-chevy-truck] Re: Engine Stand Needed
No one in their right mind would recommend buying anything from Harbor Freight. 99.% of the crap they sell is nothing but cheap, foreign-made TRASH. Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [old-chevy-truck] Re: Engine Stand Needed
That's why I call it Harbor Fright... - Original Message - From: Lonny To: old-chevy-truck@yahoogroups.com Sent: Tuesday, January 17, 2012 3:50 PM Subject: [old-chevy-truck] Re: Engine Stand Needed No one in their right mind would recommend buying anything from Harbor Freight. 99.% of the crap they sell is nothing but cheap, foreign-made TRASH. === Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 9.0.0.898, Virus/Spyware Database: 6.19070) http://www.pctools.com === === Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 9.0.0.898, Virus/Spyware Database: 6.19070) http://www.pctools.com/ === [Non-text portions of this message have been removed] Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [old-chevy-truck] Re: Engine Stand Needed
I bought an anvil from Harbor Fright that I liked. But I guess it's hard to screw up an anvil! On Jan 17, 2012, at 5:48 PM, Kelsey Farrell wrote: That's why I call it Harbor Fright... - Original Message - From: Lonny To: old-chevy-truck@yahoogroups.com Sent: Tuesday, January 17, 2012 3:50 PM Subject: [old-chevy-truck] Re: Engine Stand Needed No one in their right mind would recommend buying anything from Harbor Freight. 99.% of the crap they sell is nothing but cheap, foreign-made TRASH. === Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 9.0.0.898, Virus/Spyware Database: 6.19070) http://www.pctools.com === === Email scanned by PC Tools - No viruses or spyware found. (Email Guard: 9.0.0.898, Virus/Spyware Database: 6.19070) http://www.pctools.com/ === [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[old-chevy-truck] Re: Engine Stand Needed
Thank you Dennis ; I looked there and found a decent four point one for $59 , I was hoping to spend less that that as this is , I hope , a one time need . I'll discard or return it when I finish the job ov overhauling the 292 CID L6 thinwall engine I just bought for my '69 C/10 . Used , I see them @ Auto Swaps for $25 all the time but now I need it and the Auto Swap isn't for a while... -Nate Dennis wrote: Nate, don't travel too far, Harbor Freight has them from $55. Dennis McGillis 1953 3100 Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[old-chevy-truck] Re: Engine Stand Needed
Nate: I have one of those Harbor Freight stands sitting outside since a friend gave me one to mount the 261 on (long term work in progress/learn as I go project). I'm off today, and would have the time to dismantle it, box it up, and drop it by UPS tomorrow to ship to you for nothing. I would GLADLY consider the shipping costs as a small token of thanks for all the knowledge you have shared with me and all of us in this forum. You are a gem...say the word. Email me your shipping address. I would appreciate it. Mike Fahrbach --- In old-chevy-truck@yahoogroups.com, Nate vwnate1@... wrote: Thank you Dennis ; I looked there and found a decent four point one for $59 , I was hoping to spend less that that as this is , I hope , a one time need . I'll discard or return it when I finish the job ov overhauling the 292 CID L6 thinwall engine I just bought for my '69 C/10 . Used , I see them @ Auto Swaps for $25 all the time but now I need it and the Auto Swap isn't for a while... -Nate Dennis wrote: Nate, don't travel too far, Harbor Freight has them from $55. Dennis McGillis 1953 3100 Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: old-chevy-truck-unsubscribe@yahoogroups.comYahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) * To change settings via email: old-chevy-truck-dig...@yahoogroups.com old-chevy-truck-fullfeatu...@yahoogroups.com * To unsubscribe from this group, send an email to: old-chevy-truck-unsubscr...@yahoogroups.com * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/