Re: [onap-discuss] onap-sdnc-ansible-server cannot launch

[Rudolf Amirjanyan]

You can use 2.0.0-ONAP branch to download and install SDC, although
sdnc-ansible-server fails in 2.0.0-ONAP branch too.

Rudolf



On 9/17/18 6:33 PM, jkzcristiano wrote:
> I've just tried both Beijing and 2.0.0-ONAP now and I have the same
> issue with sdnc-ansible-server-xx-yy pod. Same logs in
> sdnc-ansible-server container. Not sure why ONAP services/resources
> are changing in stable branches. It was working one week ago. 
>
> The same happened with sdc-act service in Beijing. SDC was working 1
> month ago but now has some issues.
>
> Anyway, were you able to fix that?
>
> King Regards,
>
> Xoan
> 

-- 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12468): https://lists.onap.org/g/onap-discuss/message/12468
Mute This Topic: https://lists.onap.org/mt/25510544/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] New authentication and authorization in Casablanca for #aai

[Yang Bin]

Dear Jimmy,

   Mulit-VIM/Cloud is client of AAI as well.

   I hope this transition will not impact M4 so that we can figure 
out how to comply with this new rule. Thanks

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682Fax +86,10,64398189
Skype: yangbincs993

From: onap-discuss@lists.onap.org [mailto:onap-discuss@lists.onap.org] On 
Behalf Of Jimmy Forsyth
Sent: Tuesday, September 18, 2018 10:44 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] New authentication and authorization in Casablanca for 
#aai

Dear AAI Clients,

AAI is still using HTTPS basic authentication in Casablanca but since we are 
integrating with AAF we cannot continue to use the existing usernames and 
passwords since all the ones we created in the demo in Amsterdam are against 
AAF standards – therefore, I cannot port into AAF the existing credentials that 
have been used to talk to AAI.

I have reached out directly to the PTLs of the major clients of AAI about this 
upcoming change in usernames and passwords, so they should be covered (robot, 
so, sdnc, dcae, policy, sdc, vid, appc, and oof).

I have two open commits for both HEAT and OOM environments so that your teams 
will be able to transition to the new usernames/passwords before we move to 
AAF, which will allow us to turn on the AAF enforcement without a flash cut and 
hopefully without any interruptions for those clients who have taken the step 
of converting to the new credentials.

For the rest of you who may be piggy-backing off these legacy credentials and 
your project is not listed above, the credential you have been using *will stop 
working* once AAI has enabled Authentication and Authorization with AAF.  Let 
me say that again: the usernames and passwords that you have been using will 
stop working once we enable AAF in AAI – we were hoping to get there by M4 but 
we are unlikely to reach that goal so it will be implemented shortly after M4.

Each system should be issued its own ID in AAF; if your system has not been set 
up in AAF I recommend reaching out to the AAF team ASAP (Jonathan Gathman is 
the PTL) and then let me know what your application id is.

Please let me know soon so we can make this transition as painless and seamless 
as possible.

Thanks,
Jimmy Forsyth
AAI PTL


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12467): https://lists.onap.org/g/onap-discuss/message/12467
Mute This Topic: https://lists.onap.org/mt/25742174/21656
Mute #aai: https://lists.onap.org/mk?hashtag=aai=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] New authentication and authorization in Casablanca for #aai

[Jimmy Forsyth]

Dear AAI Clients,

AAI is still using HTTPS basic authentication in Casablanca but since we are 
integrating with AAF we cannot continue to use the existing usernames and 
passwords since all the ones we created in the demo in Amsterdam are against 
AAF standards – therefore, I cannot port into AAF the existing credentials that 
have been used to talk to AAI.

I have reached out directly to the PTLs of the major clients of AAI about this 
upcoming change in usernames and passwords, so they should be covered (robot, 
so, sdnc, dcae, policy, sdc, vid, appc, and oof).

I have two open commits for both HEAT and OOM environments so that your teams 
will be able to transition to the new usernames/passwords before we move to 
AAF, which will allow us to turn on the AAF enforcement without a flash cut and 
hopefully without any interruptions for those clients who have taken the step 
of converting to the new credentials.

For the rest of you who may be piggy-backing off these legacy credentials and 
your project is not listed above, the credential you have been using *will stop 
working* once AAI has enabled Authentication and Authorization with AAF.  Let 
me say that again: the usernames and passwords that you have been using will 
stop working once we enable AAF in AAI – we were hoping to get there by M4 but 
we are unlikely to reach that goal so it will be implemented shortly after M4.

Each system should be issued its own ID in AAF; if your system has not been set 
up in AAF I recommend reaching out to the AAF team ASAP (Jonathan Gathman is 
the PTL) and then let me know what your application id is.

Please let me know soon so we can make this transition as painless and seamless 
as possible.

Thanks,
Jimmy Forsyth
AAI PTL

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12466): https://lists.onap.org/g/onap-discuss/message/12466
Mute This Topic: https://lists.onap.org/mt/25742174/21656
Mute #aai: https://lists.onap.org/mk?hashtag=aai=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] OOM Full deployment - do a --set contrib.enabled=false until CCSDK-366 is completed

[Michael O'Brien]

Team,
If you get the following, first found by JRam
To avoid this please reserve and implement non-conflicting ports and deploy 
the entire system if you change charts in OOM - both before and after merging 
code to master - see Mike's 
https://lists.onap.org/g/onap-discuss/topic/oom_improved_oom_nodeport/25310021?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,60,25310021

root@a-onap-devops:~/_dev/oom_20180917/oom/kubernetes# sudo helm install 
local/onap -n onap --namespace onap
Error: release onap failed: Service "dmaap-dr-prov" is invalid: 
spec.ports[1].nodePort: Invalid value: 30269: provided port is already allocated

It is a known (as of a couple hours ago) issue and is being fixed.
https://jira.onap.org/browse/CCSDK-366
In the meantime disable contrib and you will deploy as-is

Either vi oom/kubernetes/onap/values.yaml and disable contrib
https://git.onap.org/oom/tree/kubernetes/onap/values.yaml#n82
contrib:
  enabled: false


Or use -set contrib.enabled=false

  393  sudo helm delete --purge onap
  394  kubectl delete namespace onap
  395  kubectl delete pv --all
  396  kubectl delete pvc --all
  397  kubectl delete secrets --all
  398  kubectl delete clusterrolebindings --all
  399  sudo make all
  400  sudo make onap
  402  sudo helm install local/onap -n onap --namespace onap

root@a-onap-devops:~/_dev/oom_20180917/oom/kubernetes# sudo helm install 
local/onap -n onap --namespace onap
NAME:   onap
Error: getting deployed release "onap": release: "onap" not found
root@a-onap-devops:~/_dev/oom_20180917/oom/kubernetes# kubectl get release

above is due to the known configmap size issue - pods deploy anyway

root@a-onap-devops:~/_dev/oom_20180917/oom/kubernetes# kubectl get pods 
--all-namespaces
NAMESPACE NAMEREADY 
STATUS  RESTARTS   AGE
kube-system   heapster-6cfb49f776-9lqt2   1/1   
Running 0  49d
kube-system   kube-dns-75c8cb4ccb-tw992   3/3   
Running 0  49d
kube-system   kubernetes-dashboard-6f4c8b9cd5-rcbp2   1/1   
Running 0  49d
kube-system   monitoring-grafana-76f5b489d5-r99rh 1/1   
Running 0  49d
kube-system   monitoring-influxdb-6fc88bd58d-h875w1/1   
Running 0  49d
kube-system   tiller-deploy-8b6c5d4fb-vcx9m   1/1   
Running 0  18d
onap  onap-aaf-cm-65b685449-dwlqt 0/1   
Init:0/20  2m
onap  onap-aaf-create-config-t2p9l0/1   
Init:0/10  2m
onap  onap-aaf-cs-6ddbb9d674-n5t5l0/1   
ContainerCreating   0  2m
onap  onap-aaf-fs-7b96687d64-vjq5s0/1   
Init:0/20  2m
onap  onap-aaf-gui-77d9f8f54-9nf5z0/1   
Init:0/20  2m
onap  onap-aaf-hello-76cb4d748c-b7cdh 0/1   
Init:0/20  2m
onap  onap-aaf-locate-7866799fd9-2t6g80/1   
Init:0/20  2m
onap  onap-aaf-oauth-564bbbf568-jk48z 0/1   
Init:0/20  2m
onap  onap-aaf-service-657df4578d-6knxn   0/1   
Init:0/20  2m
onap  onap-aaf-sms-844c974c6-fw4280/1   
Pending 0  2m
onap  onap-aaf-sms-quorumclient-0 0/1   
Pending 0  2m
onap  onap-aaf-sms-vault-00/2   
ContainerCreating   0  2m
onap  onap-aai-5f4bd8c7c5-vlmzp   0/1   
Pending 0  2m
onap  onap-aai-babel-9bb8ff466-74dxx  0/2   
ContainerCreating   0  2m
onap  onap-aai-cassandra-00/1   
ContainerCreating   0  2m
onap  onap-aai-champ-748b8f86-dpqh9   0/1   
Init:0/10  2m
onap  onap-aai-data-router-95699ff87-5pf780/1   
Pending 0  2m
onap  onap-aai-elasticsearch-6fd5bb7756-mv4hd 0/1   
Init:0/10  2m
onap  onap-aai-gizmo-89c7bfdd-zq7m5   0/2   
Pending 0  2m
onap  onap-aai-graphadmin-5b44968fc-9nfn9 0/2   
Init:0/10  2m
onap  onap-aai-graphadmin-create-db-schema-48xqk  0/1   
Pending 0  2m
onap  

Re: [onap-discuss] dcaegen2 healthcheck in casablanca

[Vijay VK]

Hi Donald,
In OOM deployments DCAE healthcheck are reported by separate service - 
dcae-healthcheck; this is deployment of 
org.onap.dcaegen2.deployments.healthcheck-container which is built from 
dcaegen2/deployment repo - healthcheck-container module. The container includes 
list of deployments done in DCAE  (both via helm charts and Cloudify) for which 
periodic health check is performed. For helm deployed component - servicename 
defined is charts are used and for cloudify, the deployments identified in 
bootstrap are prefixed with release name. 

The container itself is deployed via helm charts 
(oom/kubernetes/dcaegen2/charts/dcae-healthcheck) though. This polls the 
deployments specified periodically and reports the status. One constraint with 
this option is only static deployment can be included in this heathcheck. For 
Dublin, we are looking to expand to support dynamic deployment as well (for 
components deployed via CLAMP flow).

As PNDA is targeted deployment via helm charts, we can extend the healthcheck 
container 
(https://git.onap.org/dcaegen2/deployments/tree/healthcheck-container/healthcheck.js)
 to include the service deployed in PNDA charts for additional health check 
reporting. 

Thanks,
Vijay

-Original Message-
From: Donald Hunter (donaldh)  
Sent: Monday, September 17, 2018 12:13 PM
To: VENKATESH KUMAR, VIJAY 
Cc: onap-discuss@lists.onap.org
Subject: dcaegen2 healthcheck in casablanca 

Hi Vijay,

Is the healthcheck architecture for dcaegen2 in Casablanca documented anywhere? 
I’m trying to figure out where best to integrate PNDA into the health check and 
don’t currently see anything working successfully on master.

Thanks,
Donald.

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12464): https://lists.onap.org/g/onap-discuss/message/12464
Mute This Topic: https://lists.onap.org/mt/25724606/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [onap-discuss OOM ROBOT] credentials and scripts

[Alexis de Talhouet]

George,

To setup the creds, you can use oom/kubernetes/robot demo.sh  
init_robot ; it will prompt you to enter the password for the user test, but it 
will afterward do some other stuff that might fail.
Another solution would be to go in the pod itself, and create the file 
/etc/lighttpd/authorization where you can put username:password (I used 
test:test for instance).
Then things should work.

Alexis

> On Sep 17, 2018, at 5:17 PM, George Clapp  wrote:
> 
> I installed a minimal set of ONAP components (just SDNC, DMaaP and Robot) in 
> a rancher/kubernetes environment.  I’m using the instructions at 
> https://wiki.onap.org/display/DW/Using+Robot+Command+Line 
>  to access robot.  
> I browsed to :30209 and was prompted for credentials.  I searched 
> but nothing that I found worked.  Can someone tell me the current 
> credentials?  Also, that same wiki page says there are several scripts in the 
> robot container, but I found nothing when I ssh’d into the container.  What’s 
> the current status?
>
> Thanks much,
> George
> 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12463): https://lists.onap.org/g/onap-discuss/message/12463
Mute This Topic: https://lists.onap.org/mt/25729195/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [onap-discuss OOM ROBOT] credentials and scripts

[Brian]

Run "./demo-k8s.sh onap init_robot"  and it will prompt you for a password for 
the "test" userid.

If this fails - log into the robot got to /etc/lighttpd and create a file 
called "authorization" with one line "test:test" in it.

To use the "test" as the password for "test"

bRian


From: onap-discuss@lists.onap.org  On Behalf Of 
George Clapp
Sent: Monday, September 17, 2018 5:17 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [onap-discuss OOM ROBOT] credentials and scripts

I installed a minimal set of ONAP components (just SDNC, DMaaP and Robot) in a 
rancher/kubernetes environment.  I'm using the instructions at 
https://wiki.onap.org/display/DW/Using+Robot+Command+Line
 to access robot.  I browsed to :30209 and was prompted for 
credentials.  I searched but nothing that I found worked.  Can someone tell me 
the current credentials?  Also, that same wiki page says there are several 
scripts in the robot container, but I found nothing when I ssh'd into the 
container.  What's the current status?

Thanks much,
George


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12462): https://lists.onap.org/g/onap-discuss/message/12462
Mute This Topic: https://lists.onap.org/mt/25729195/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] [onap-discuss OOM ROBOT] credentials and scripts

[George Clapp]

I installed a minimal set of ONAP components (just SDNC, DMaaP and Robot) in
a rancher/kubernetes environment.  I'm using the instructions at
https://wiki.onap.org/display/DW/Using+Robot+Command+Line to access robot.
I browsed to :30209 and was prompted for credentials.  I
searched but nothing that I found worked.  Can someone tell me the current
credentials?  Also, that same wiki page says there are several scripts in
the robot container, but I found nothing when I ssh'd into the container.
What's the current status?

 

Thanks much,

George


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12461): https://lists.onap.org/g/onap-discuss/message/12461
Mute This Topic: https://lists.onap.org/mt/25729195/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Accepted: [onap-discuss] Extended SO weekly meeting

[Cas Majd]

BEGIN:VCALENDAR
METHOD:REPLY
PRODID:Microsoft Exchange Server 2010
VERSION:2.0
BEGIN:VTIMEZONE
TZID:Eastern Standard Time
BEGIN:STANDARD
DTSTART:16010101T02
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=1SU;BYMONTH=11
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T02
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=2SU;BYMONTH=3
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
ATTENDEE;PARTSTAT=ACCEPTED;CN=Casem Majd (Cas Majd):MAILTO:cas.majd@huawei.
 com
SUMMARY;LANGUAGE=en-US:Accepted: [onap-discuss] Extended SO weekly meeting
DTSTART;TZID=Eastern Standard Time:20180917T10
DTEND;TZID=Eastern Standard Time:20180917T11
UID:04008200E00074C5B7101A82E0082E2D88163F4ED401000
 01000845EC7AA97917444AF862B58A3A98467
CLASS:PUBLIC
PRIORITY:5
DTSTAMP:20180917T211035Z
TRANSP:OPAQUE
STATUS:CONFIRMED
SEQUENCE:1
LOCATION;LANGUAGE=en-US:
X-MICROSOFT-CDO-APPT-SEQUENCE:1
X-MICROSOFT-CDO-OWNERAPPTID:2116651566
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-DISALLOW-COUNTER:FALSE
END:VEVENT
END:VCALENDAR

[onap-discuss] [OOM][AAI] Is aai data router broken?

[Alexis de Talhouet]

Hi experts,

I’ve been trying to distribute vFW today using the OOM deployment, but it 
appears aai data-router is in CrashLoopBackOff because port 9502 won’t open.
Here are some logs:

2018-09-17T20:59:30.773Z||main|DataRouter||org.onap.aai.datarouter.Application||INFO|Starting
 Application v1.3.0-SNAPSHOT on onap-aai-data-router-5c5d5d8584-bcc74 with PID 
1 (/opt/app/data-router/data-router.jar started by root in /opt/app/data-router)
2018-09-17T20:59:30.773Z||main|DataRouter||org.onap.aai.datarouter.Application||INFO|No
 active profile set, falling back to default profiles: default
2018-09-17T20:59:31.094Z||background-preinit|DataRouter||org.hibernate.validator.internal.util.Version||INFO|HV01:
 Hibernate Validator 5.3.6.Final
2018-09-17T20:59:33.008Z||main|DataRouter||org.apache.tomcat.util.net.SSLHostConfig||WARN|The
 protocol [TLSv1.2] was added to the list of protocols on the SSLHostConfig 
named [_default_]. Check if a +/- prefix is missing.
2018-09-17T20:59:33.100Z||main|DataRouter||org.apache.catalina.core.StandardService||INFO|Starting
 service [Tomcat]
2018-09-17T20:59:33.100Z||main|DataRouter||org.apache.catalina.core.StandardEngine||INFO|Starting
 Servlet Engine: Apache Tomcat/8.5.32
2018-09-17T20:59:33.238Z||localhost-startStop-1|DataRouter||org.apache.catalina.core.ContainerBase.[Tomcat].[localhost].[/]||INFO|Initializing
 Spring embedded WebApplicationContext
2018-09-17T20:59:38.282Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V8|
2018-09-17T20:59:38.285Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V9|
2018-09-17T20:59:38.288Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V10|
2018-09-17T20:59:38.291Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V11|
2018-09-17T20:59:38.294Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V12|
2018-09-17T20:59:38.296Z||main|DataRouter||org.onap.aai.schema.OxmModelLoader||INFO|DR0014I|DR0014I
 Successfully loaded schema: V13|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V8|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V9|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V10|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V12|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V11|
2018-09-17T20:59:38.298Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||INFO|EEP0005I|EEP0005I
 Found OXM model: V13|
2018-09-17T20:59:38.310Z||main|DataRouter||AAIRESTClient||INFO|AC0001I|AC0001I 
PUT request at url = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/entity-search-index/|
2018-09-17T20:59:38.885Z||main|DataRouter||AAIRESTClient||INFO|AC0003I|AC0003I 
PUT request operation time = 580 ms for link = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/entity-search-index/|
2018-09-17T20:59:38.885Z||main|DataRouter||AAIRESTClient||INFO|AC0004I|AC0004I 
request at url = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/entity-search-index/
 resulted in http response: 400 Bad Request|
2018-09-17T20:59:38.888Z||main|DataRouter||org.onap.aai.datarouter.policy.EntityEventPolicy||ERROR|EEP012E|EEP012E
 Failed to create Search index entity-search-index due to: 
{"error":{"root_cause":[{"type":"mapper_parsing_exception","reason":"No handler 
for type [keyword] declared on field 
[entityPrimaryKeyValue]"}],"type":"mapper_parsing_exception","reason":"Failed 
to parse mapping [default]: No handler for type [keyword] declared on field 
[entityPrimaryKeyValue]","caused_by":{"type":"mapper_parsing_exception","reason":"No
 handler for type [keyword] declared on field 
[entityPrimaryKeyValue]"}},"status":400}
   |
2018-09-17T20:59:38.888Z||main|DataRouter||AAIRESTClient||INFO|AC0001I|AC0001I 
PUT request at url = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/topography-search-index/|
2018-09-17T20:59:38.925Z||main|DataRouter||AAIRESTClient||INFO|AC0003I|AC0003I 
PUT request operation time = 37 ms for link = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/topography-search-index/|
2018-09-17T20:59:38.925Z||main|DataRouter||AAIRESTClient||INFO|AC0004I|AC0004I 
request at url = 
https://aai-search-data.onap:9509/services/search-data-service/v1/search/indexes/topography-search-index/
 

[onap-discuss] DCAE - Adding ML based network analytics

[Srini]

Hi DCAE team,

As I understand, DCAE analytics applications that exist today such as TCA are 
non-ML based.
Is there any plan to include ML based network analytics as an application in 
DCAE? If so, is anybody working on it?

Some questions on DCAE:
I started to dig little bit in DCAE on creating new analytics applications.
I know little bit on how to add new analytics applications in CDAP.  As I 
understand DCAE uses CDAP internally.
In CDAP, any new analytics applications are expected to be developed in Java. 
Deployment of applications happen by deploying JAR files.
I was told that DCAE allows analytics applications deployed as containers 
(Micro Service). Thereby, it provides choice of developing analytics 
applications in any language or using any ML framework etc...
First of all, is that understanding correct?  Is CDAP pipeline infrastructure 
modified (in DCAE) to allow micro service based chaining?
Second, is there any tutorial to create new micro-service based analytics 
applications? I tried to search, but there are too many hits and could not nail 
down the right page :(.

Thanks
Srini







-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12458): https://lists.onap.org/g/onap-discuss/message/12458
Mute This Topic: https://lists.onap.org/mt/25727425/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [ ONAP ] EXTAPI-122

[Gary Wu]

Hi Matthieu,

We deploy OOM once a day.  This chart shows, for each OOM deployment, the 
number of times your container got killed and restarted by Kubernetes.  It has 
nothing to do with gerrit.

If your container is getting killed/restarted by Kubernetes, it means that your 
liveness probe is configured incorrectly in your OOM helm chart.  The target is 
to fix the liveness probe configuration so that there are zero restarts even if 
the deployment environment is arbitrarily slow or congested on any particular 
day.

Thanks,
Gary

From: matthieu.geereba...@orange.com [mailto:matthieu.geereba...@orange.com]
Sent: Monday, September 17, 2018 2:15 AM
To: Gary Wu 
Cc: NGUYEN Quoc Nghia IMT/OLS ; DEBEAU Eric 
IMT/OLN 
Subject: [ ONAP ] EXTAPI-122

Hi Gary,

About this ticket, I do not understand graph, externalapi compare to the other 
modules. Reboot seem to occures a lot some days while some other it's only 
few.. What should be the reasonable limit for nbi 3.0.0 latest ? ( 
externalapi/nbi :3.0.0-latest )

https://jira.onap.org/browse/EXTAPI-122

http://onapci.org/grafana/d/kRvfoqKmz/oom-container-restarts?orgId=1

Do you think we are facing an app instability ? is it relative to the use of 
some magic world we can use in gerrit or is it independant ?
Thank you for your advice



[logo Orange]

Matthieu Geerebaert
Software architect
Product Owner API Designer
ORANGE/IMT/OLS/ARSEC/API

fixe :  +33 5 56 53 09 47 

mobile :  +33 6 79 16 83 23 

matthieu.geereba...@orange.com


_



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12457): https://lists.onap.org/g/onap-discuss/message/12457
Mute This Topic: https://lists.onap.org/mt/25725102/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] dcaegen2 healthcheck in casablanca

[Donald Hunter via Lists.Onap.Org]

Hi Vijay,

Is the healthcheck architecture for dcaegen2 in Casablanca documented anywhere? 
I’m trying to figure out where best to integrate PNDA into the health check and 
don’t currently see anything working successfully on master.

Thanks,
Donald.
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12456): https://lists.onap.org/g/onap-discuss/message/12456
Mute This Topic: https://lists.onap.org/mt/25724606/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [portal] ONAP GUI Styling Guidance

[Manoop Talasila]

Hi Guangrong,

Below is the documentation on portal UI styling and provides the references to 
create your first application page with appropriate CSS.

  *   https://wiki.onap.org/display/DW/Portal%27s+SDK+UI+documentation
  *   
https://docs.onap.org/en/beijing/submodules/portal.git/docs/tutorials/portal-sdk/your-angularjs-app.html

Regarding “CSS files under 
ecomp-portal-FE-common
 and 
ecomp-portal-FE-os”,
 they are structured in sucha way that, css files in “*-common” are general 
purpose which can be used commonly by any applications (app), but the css files 
in “*-os” are specific to your app. If your GUI is based on the portal-sdk 
(which is recommended), then you need both “*-common” and “*-os”; If not based 
on portal-sdk, then you can pick appropriate css elements from these projects 
to make your GUI output align closely with the other ONAP apps.

In case of any specific questions, please reach out to Portal experts on these 
topics (CCed Sunder and Saravanan). Thanks.

Manoop

From: Guangrong Fu 
Date: Monday, September 17, 2018 at 2:27 AM
To: "TALASILA, MANOOP (MANOOP)" 
Cc: "fu.guangr...@zte.com.cn" , onap-discuss 

Subject: [portal] ONAP GUI Styling Guidance

Hi Manoop,

The Holmes team is developing its GUI to make itself more user-friendly. 
Because our ultimate goal is to integrate it with CLAMP (or Policy), we want to 
make the appearance of the GUI well aligned with other components in ONAP.

I've looked through the Portal repo and found some CSS files under 
ecomp-portal-FE-common
 and 
ecomp-portal-FE-os.
 But I don't know which of them could be used as our basic styling guidelines.

Is there a wiki page telling us how to style our pages? Or are there any 
existing CSS files for us to follow?

Thanks,
Guangrong

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12455): https://lists.onap.org/g/onap-discuss/message/12455
Mute This Topic: https://lists.onap.org/mt/25724032/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] onap-sdnc-ansible-server cannot launch

[jkzcristiano]

I've just tried both Beijing and 2.0.0-ONAP now and I have the same issue with 
sdnc-ansible-server-xx-yy pod. Same logs in sdnc-ansible-server container. Not 
sure why ONAP services/resources are changing in stable branches. It was 
working one week ago. 

The same happened with sdc-act service in Beijing. SDC was working 1 month ago 
but now has some issues.

Anyway, were you able to fix that?

King Regards,

Xoan

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12454): https://lists.onap.org/g/onap-discuss/message/12454
Mute This Topic: https://lists.onap.org/mt/25510544/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [onap-install] helm install local/onap failed

[Katsiaryna Kazak]

Hi Prasad,

Which version do you try to install?

If its beijing (I suppose so, because you mention downgrading), then having 
helm version 2.8.2 is essential.

For me downgrading process looked something like that:
1. helm reset --force  - this will uninstall tiller from your kubectl cluster
2. delete/uninstall the old helm, download helm ver. 2.8.2 and start over again 
(helm init etc.)

Good luck!

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12453): https://lists.onap.org/g/onap-discuss/message/12453
Mute This Topic: https://lists.onap.org/mt/25721303/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [DOC] Request for Feedback - ReadTheDocs Theme Change & Report Issue JIRA Link

[Roger Maitland]

+1

I find this theme to be a large improvement over the previous one.  The format 
is easier to read and the ‘Report issue’ ribbon a welcome addition.

Cheers,
Roger
From:  on behalf of Rich Bennett 
Reply-To: "onap-discuss@lists.onap.org" , 
"rb2...@att.com" 
Date: Thursday, September 13, 2018 at 5:37 PM
To: "onap-discuss@lists.onap.org" 
Subject: [onap-discuss] [DOC] Request for Feedback - ReadTheDocs Theme Change & 
Report Issue JIRA Link

At the 9/10/2018 PTL meeting, we briefly discussed moving to a more modern, 
mobile friendly theme for ONAP Release Documentation published on ReadTheDocs 
and a feedback mechanism for reporting issues in release documentation.

You can view the latest master branch built with the theme and the addition of 
a  “report issue” ribbon  here
https://logs.onap.org/production/vex-yul-ecomp-jenkins-1/doc-master-verify-rtd/2893/html/

Please respond with questions, concerns, and recommendations on introducing 
these changes in the master branch prior to branching for Casablanca.

Thank you.

Rich




This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12452): https://lists.onap.org/g/onap-discuss/message/12452
Mute This Topic: https://lists.onap.org/mt/25646973/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] setting up local repository for OOM images

[Vidhu Shekhar Pandey - ERS, HCL Tech]

Hi Gary,

I create a wiki page to put this method of hosting a local registry for ONAP 
images. Request you to take a look and suggest any further optimizations. I 
tried it in my setup, it is working.
https://wiki.onap.org/display/DW/ONAP+OOM+Beijing+-+Hosting+docker+images+locally.

Thanks,
Vidhu

From: Gary Wu 
Sent: 16 August 2018 23:32
To: Vidhu Shekhar Pandey - ERS, HCL Tech ; Borislav 
Glozman ; LUNANUOVA, DOMINIC (DOMINIC) 
; onap-discuss@lists.onap.org
Cc: Mike Elliott ; Michael O'Brien 

Subject: RE: [onap-discuss] setting up local repository for OOM images

Hi Vidhu,

I don't use nexus3.  I use docker's registry proxy cache.  Here is how to set 
it up:

Start with a clean install of Ubuntu 16.04.  Then run the following:

apt-get install docker.io
docker run -d -p 5000:5000 --restart=unless-stopped --name registry -e 
REGISTRY_PROXY_REMOTEURL=https://nexus3.onap.org:10001 registry:2


Thanks,
Gary

From: Vidhu Shekhar Pandey - ERS, HCL Tech [mailto:vidhu.pan...@hcl.com]
Sent: Thursday, August 16, 2018 7:53 AM
To: Borislav Glozman 
mailto:borislav.gloz...@amdocs.com>>; LUNANUOVA, 
DOMINIC (DOMINIC) mailto:d...@research.att.com>>; 
onap-discuss@lists.onap.org
Cc: Mike Elliott mailto:mike.elli...@amdocs.com>>; 
Michael O'Brien mailto:frank.obr...@amdocs.com>>; Gary 
Wu mailto:gary.i...@huawei.com>>
Subject: RE: [onap-discuss] setting up local repository for OOM images

Thanks Borislav and Dominic for the information. Currently my problem is point 
number 1. I found two links related to this:


1.   
https://wiki.onap.org/display/DW/Setting+up+a+Nexus+Proxy


2.   
https://wiki.onap.org/pages/viewpage.action?pageId=6590586.


Second link has a section "Setting up Nexus 2 and 3 OSS Repositories"

Would be great if Gary could suggest and recommend a quick way to set it up.

Thanks,
Vidhu

From: Borislav Glozman 
mailto:borislav.gloz...@amdocs.com>>
Sent: 16 August 2018 20:03
To: LUNANUOVA, DOMINIC (DOMINIC) 
mailto:d...@research.att.com>>; 
onap-discuss@lists.onap.org; Vidhu Shekhar 
Pandey - ERS, HCL Tech mailto:vidhu.pan...@hcl.com>>
Cc: Mike Elliott mailto:mike.elli...@amdocs.com>>; 
Michael O'Brien mailto:frank.obr...@amdocs.com>>; Gary 
Wu mailto:gary.i...@huawei.com>>
Subject: RE: [onap-discuss] setting up local repository for OOM images

Dom, thank you for sharing this method.
Indeed during development your approach is convenient (we also use it).
Please notice these are two different problem. I am not sure which one of them 
Vidhu is trying to solve:

1.   speeding up deployment using local nexus3, preventing network traffic 
and pulling from slow onap nexus3

2.   dev existing or new docker images

Thanks,
Borislav Glozman
O:+972.9.776.1988
M:+972.52.2835726
[amdocs-a]
Amdocs a Platinum member of 
ONAP

From: LUNANUOVA, DOMINIC (DOMINIC) [mailto:d...@research.att.com]
Sent: Thursday, August 16, 2018 5:16 PM
To: onap-discuss@lists.onap.org; Borislav 
Glozman mailto:borislav.gloz...@amdocs.com>>; 
Vidhu Shekhar Pandey - ERS, HCL Tech 
mailto:vidhu.pan...@hcl.com>>
Cc: Mike Elliott mailto:mike.elli...@amdocs.com>>; 
Michael O'Brien mailto:frank.obr...@amdocs.com>>; Gary 
Wu mailto:gary.i...@huawei.com>>
Subject: RE: [onap-discuss] setting up local repository for OOM images

Another approach here: 
https://wiki.onap.org/display/DW/questions/38118463/how-to-configure-a-kubernetes-cluster-to-use-a-local-insecure-registry

-Dom

From: onap-discuss@lists.onap.org 
[mailto:onap-discuss@lists.onap.org] On Behalf Of Borislav Glozman
Sent: Thursday, August 16, 2018 3:34 

Re: [onap-discuss] Problem to install onap sdc on kubernetes

[Vidhu Shekhar Pandey - ERS, HCL Tech]

Hi Rudolf,

Please download 2.0.0-ONAP.

Regards,
Vidhu

From: onap-discuss@lists.onap.org  On Behalf Of 
Rudolf Amirjanyan
Sent: 06 September 2018 16:03
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] Problem to install onap sdc on kubernetes


Installing onap SDC , all submodules (sdc-be, sdc-ce, etc) are okay except 
sdc-act.

I have modified oom/kubernetes/sdc/charts/sdc-act/values.yaml and changed the 
url of activity-spec from 1.3.0-snapshot to 1.2.0.

# application image
repository: nexus3.onap.org:10001
image: onap/activity-spec:1.2.0
configInitImage: onap/activity-spec-init:1.2.0

But still problem to install.

Please help to get the solution.

bellow are some commands I did to trouble shut..

>

from command line



root@serv2:~/onapinst/oom/kubernetes/sdc/charts/sdc-act# kubectl get pods |grep 
sdc
br-sdc-sdc-act-848bff588d-kddr7   0/1   Init:0/1   19   
  4h
br-sdc-sdc-be-6db7855f44-92v5k2/2   Running0
  4h
br-sdc-sdc-cs-66c744b574-pvw5c1/1   Running0
  4h
br-sdc-sdc-es-7f7c9f796-8jgjr 1/1   Running0
  4h
br-sdc-sdc-fe-85d8798c95-rb7sp2/2   Running0
  4h
br-sdc-sdc-kb-945b76479-2zkp8 1/1   Running0
  4h
br-sdc-sdc-onboarding-be-cdb85499c-9l6ms  2/2   Running0
  4h
br-sdc-sdc-wfd-86c49df4d-cnw2l1/1   Running0
  4h



root@serv2:/home/rud-   kubectl logs br-sdc-sdc-act-848bff588d-kddr7

Error from server (BadRequest): container "sdc-act" in pod 
"br-sdc-sdc-act-848bff588d-kddr7" is waiting to start: PodInitializing



root@serv2:/home/rud# kubectl describe pod br-sdc-sdc-act-848bff588d-kddr7
Name:   br-sdc-sdc-act-848bff588d-kddr7
Namespace:  default
Node:   onap0/41.220.208.10
Start Time: Thu, 06 Sep 2018 09:27:58 +0300
Labels: app=sdc-act
pod-template-hash=4046991448
release=br-sdc
Annotations:
kubernetes.io/created-by={"kind":"SerializedReference","apiVersion":"v1","reference":{"kind":"ReplicaSet","namespace":"default","name":"br-sdc-sdc-act-848bff588d","uid":"ff59fc8c-b19d-11e8-b8c8-025971...
Status: Pending
IP: 10.42.221.225
Created By: ReplicaSet/br-sdc-sdc-act-848bff588d
Controlled By:  ReplicaSet/br-sdc-sdc-act-848bff588d
Init Containers:
  sdc-act-job-completion:
Container ID:  
docker://13743bebdf9f8e705ee8012db588e9193565901e778d3d7fb703819f4e424b1d
Image: oomk8s/readiness-check:2.0.0
Image ID:  
docker-pullable://oomk8s/readiness-check@sha256:7daa08b81954360ad03364febcb3dcfeb723bcc12ce3eb3ed3e53f2323ed
Port:  
Command:
  /root/job_complete.py
Args:
  --job-name
  br-sdc-sdc-act-init-activity-spec
State:  Running
  Started:  Thu, 06 Sep 2018 13:06:44 +0300
Last State: Terminated
  Reason:   Error
  Exit Code:1
  Started:  Thu, 06 Sep 2018 12:56:37 +0300
  Finished: Thu, 06 Sep 2018 13:06:39 +0300
Ready:  False
Restart Count:  17
Environment:
  NAMESPACE:  default (v1:metadata.namespace)
Mounts:
  /var/run/secrets/kubernetes.io/serviceaccount from default-token-prbm8 
(ro)
Containers:
  sdc-act:
Container ID:
Image:  nexus3.onap.org:10001/onap/activity-spec:1.2.0
Image ID:
Port:   8080/TCP
State:  Waiting
  Reason:   PodInitializing
Ready:  False
Restart Count:  0
Liveness:   tcp-socket :8080 delay=60s timeout=1s period=10s #success=1 
#failure=3
Readiness:  tcp-socket :8080 delay=60s timeout=1s period=10s #success=1 
#failure=3
Environment:
  JAVA_OPTIONS:  -Xmx1536m -Xms1536m
Mounts:
  /etc/onap/activity-spec/be/config from br-sdc-sdc-act-config (rw)
  /var/run/secrets/kubernetes.io/serviceaccount from default-token-prbm8 
(ro)
Conditions:
  Type   Status
  InitializedFalse
  Ready  False
  PodScheduled   True
Volumes:
  br-sdc-sdc-act-config:
Type:  ConfigMap (a volume populated by a ConfigMap)
Name:  br-sdc-sdc-act-configmap
Optional:  false
  default-token-prbm8:
Type:Secret (a volume populated by a Secret)
SecretName:  default-token-prbm8
Optional:false
QoS Class:   BestEffort
Node-Selectors:  
Tolerations: node.alpha.kubernetes.io/notReady:NoExecute for 300s
 node.alpha.kubernetes.io/unreachable:NoExecute for 300s
Events:
  TypeReason   AgeFromMessage
  --      ---
  Normal  Started  55m (x13 over 3h)  kubelet, onap0  Started container
  Normal  Created  45m (x14 over 3h)  kubelet, onap0  Created container
  Normal  Pulling  4m (x18 over 3h)   kubelet, onap0  

Re: [onap-discuss] How to debug BPMN Workflow [SO]

[seshu kumar m]

Hi Prakash

To be abe to debug the workflow using the cockpit the way you would need will 
require a entreprise edition of camunda cockpit.
We have come up with a new feature (SO monitoring), you can find more details 
under here
https://wiki.onap.org/display/DW/SO+Monitoring+Feature+Design

Thanks and Regards,
M Seshu Kumar
Senior System Architect
uTraffic, Software BU,
Huawei Technologies India Pvt. Ltd.
Survey No. 37, Next to EPIP Area, Kundalahalli, Whitefield
Bengaluru-560066, Karnataka.
Tel: + 91-80-49160700 , Mob: 9845355488
___
This e-mail and its attachments contain confidential information from HUAWEI, 
which is intended only for the person or entity whose address is listed above. 
Any use of the information contained herein in any way (including, but not 
limited to, total or partial disclosure, reproduction, or dissemination) by 
persons other than the intended recipient(s) is prohibited. If you receive this 
e-mail in error, please notify the sender by phone or email immediately and 
delete it!
---

From: onap-discuss@lists.onap.org [onap-discuss@lists.onap.org] on behalf of 
Prakash via Lists.Onap.Org [prakash.p=verizon@lists.onap.org]
Sent: Monday, September 17, 2018 7:41 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] How to debug BPMN Workflow [SO]

Hi Team,
 I'm trying to debug the flow how CreateVfModuleInfra.Bpmn gets executed at 
run time using cockpit but i failed to see the runtime flow in UI since the 
execution was so fast.
1. Is there any way to have a breakpoint in any of the BPMN Objects and 
continue the flow ?
2. Cockpit has any option to dubug the workflow at runtime?
3. Also let me know how callback concept works in SO?

Kindly throw your inputs!!!

--
Regards,
Prakas P,
Network and Technology IT,
VeriZon



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12449): https://lists.onap.org/g/onap-discuss/message/12449
Mute This Topic: https://lists.onap.org/mt/25722093/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] How to debug BPMN Workflow [SO]

[Prakash via Lists.Onap.Org]

Hi Team,
 I'm trying to debug the flow how CreateVfModuleInfra.Bpmn gets
executed at run time using cockpit but i failed to see the runtime flow in
UI since the execution was so fast.
1. Is there any way to have a breakpoint in any of the BPMN Objects and
continue the flow ?
2. Cockpit has any option to dubug the workflow at runtime?
3. Also let me know how callback concept works in SO?

Kindly throw your inputs!!!

-- 
*Regards,*
Prakas P,
Network and Technology IT,
VeriZon

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12448): https://lists.onap.org/g/onap-discuss/message/12448
Mute This Topic: https://lists.onap.org/mt/25722093/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] Extended SO weekly meeting

[seshu kumar m]

BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft Exchange Server 2010
VERSION:2.0
BEGIN:VTIMEZONE
TZID:China Standard Time
BEGIN:STANDARD
DTSTART:16010101T00
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T00
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
ORGANIZER;CN=Seshu m:MAILTO:seshu.kuma...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=onap-discu
 s...@lists.onap.org:MAILTO:onap-discuss@lists.onap.org
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="DAUGHERTY,
  ROBERT E":MAILTO:rd4...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=ss835w@att
 .com:MAILTO:ss8...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=marcus.wil
 li...@intel.com:MAILTO:marcus.willi...@intel.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=byung-woo.
 j...@ericsson.com:MAILTO:byung-woo@ericsson.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=sanchita@t
 echmahindra.com:MAILTO:sanch...@techmahindra.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Dhananjay 
 Pavgi:MAILTO:dp00476...@techmahindra.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Ethan Lynn
 :MAILTO:ethanly...@vmware.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Eshet, Ita
 mar":MAILTO:ie2...@intl.att.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=viswanath.
 kumarskandpr...@verizon.com:MAILTO:viswanath.kumarskandpr...@verizon.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Iurcovich,
  Hector (Nokia - US/Naperville)":MAILTO:hector.iurcov...@nokia.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Tomer Bar 
 David:MAILTO:tomer.bar-da...@amdocs.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Daniel Sil
 verthorn:MAILTO:daniel.silverth...@amdocs.com
ATTENDEE;ROLE=OPT-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Alex Daltr
 ini (adaltrin):MAILTO:adalt...@cisco.com
DESCRIPTION;LANGUAGE=en-US:When: Monday\, September 17\, 2018 10:00 PM-11:0
 0 PM. (UTC+08:00) Beijing\, Chongqing\, Hong Kong\, Urumqi\n\n*~*~*~*~*~*~
 *~*~*~*\n\n\n\nExtended SO weekly meeting to discuss on M4 preparedness\n\
 n\nWhere: https://zoom.us/j/309416964\n\n\n\nThis event has been changed.\
 nmore details »\n\n[so] Weekly Meeting\nWhenChanged:
  Weekly from 5:00 PM to 7:30 PM on Monday\nWhere   https://zoom.us/j/30941
 6964 (map)\nCalendarse
 shu.kuma...@huawei.com\nWho •   kp...@linuxfoundation.org - crea
 tor\n•   seshu.kuma...@huawei.com\n•   onap-disc...@lists.onap
 .org\n\n\n
SUMMARY;LANGUAGE=en-US:Extended SO weekly meeting
DTSTART;TZID=China Standard Time:20180917T22
DTEND;TZID=China Standard Time:20180917T23
UID:04008200E00074C5B7101A82E0082E2D88163F4ED401000
 01000845EC7AA97917444AF862B58A3A98467
CLASS:PUBLIC
PRIORITY:5
DTSTAMP:20180917T114145Z
TRANSP:OPAQUE
STATUS:CONFIRMED
SEQUENCE:1
LOCATION;LANGUAGE=en-US:
X-MICROSOFT-CDO-APPT-SEQUENCE:1
X-MICROSOFT-CDO-OWNERAPPTID:2116651566
X-MICROSOFT-CDO-BUSYSTATUS:TENTATIVE
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-DISALLOW-COUNTER:FALSE
BEGIN:VALARM
ACTION:DISPLAY
DESCRIPTION:REMINDER
TRIGGER;RELATED=START:-PT15M
END:VALARM
END:VEVENT
END:VCALENDAR

[onap-discuss][onap-install] helm install local/onap failed

[prasad kokkula]

Hi,
I have tried to install the ONAP on kubernetes node (ubuntu 16.04VM). i got
bellow error (on my host 2 VM's are there one is for rancher and other is
for kubernetes node). The below commands are executed on kubernetes node.

I have tried to downgrade the helm version to v2.8.2 but not success. Could
you please help me, how to resolve this issue.
-

root@user:/home/user# helm install local/onap -n dev --namespace onap
Error: Chart incompatible with Tiller v2.9.1
root@user:/home/user#
root@user:/home/user#
root@user:/home/user# helm version
Client: {SemVer:"v2.9.1",
GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
Server: {SemVer:"v2.9.1",
GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
root@user:/home/user#

root@user:/home/user#
root@user:/home/user# helm search -l
NAMECHART VERSION   APP VERSION DESCRIPTION
local/aaf   2.0.0   ONAP Application
Authorization Framework
local/aai   2.0.0   ONAP Active and
Available Inventory
local/appc  2.0.0   Application
Controller
local/clamp 2.0.0   ONAP Clamp
local/cli   2.0.0   ONAP Command Line
Interface
local/common2.0.0   Common templates
for inclusion in other charts
local/consul2.0.0   ONAP Consul Agent
local/dcaegen2  2.0.0   ONAP DCAE Gen2
local/dgbuilder 2.0.0   D.G. Builder
application
local/dmaap 2.0.0   ONAP DMaaP
components
local/esr   2.0.0   ONAP External
System Register
local/log   2.0.0   ONAP Logging
ElasticStack
local/mariadb-galera2.0.0   Chart for MariaDB
Galera cluster
local/mongo 2.0.0   MongoDB Server
local/msb   2.0.0   ONAP MicroServices
Bus
local/multicloud2.0.0   ONAP multicloud
broker
local/mysql 2.0.0   MySQL Server
local/nbi   2.0.0   ONAP Northbound
Interface
local/onap  2.0.0   beijing Open Network
Automation Platform (ONAP)
local/oof   2.0.0   ONAP Optimization
Framework
local/policy2.0.0   ONAP Policy
Administration Point
local/portal2.0.0   ONAP Web Portal
local/postgres  2.0.0   ONAP Postgres Server
local/robot 2.0.0   A helm Chart for
kubernetes-ONAP Robot
local/sdc   2.0.0   Service Design and
Creation Umbrella Helm charts
local/sdnc  2.0.0   SDN Controller
local/sdnc-prom 2.0.0   ONAP SDNC Policy
Driven Ownership Management
local/sniro-emulator2.0.0   ONAP Mock Sniro
Emulator
local/so2.0.0   ONAP Service
Orchestrator
local/uui   2.0.0   ONAP uui
local/vfc   2.0.0   ONAP Virtual
Function Controller (VF-C)
local/vid   2.0.0   ONAP Virtual
Infrastructure Deployment
local/vnfsdk2.0.0   ONAP VNF SDK
root@user:/home/user#



I have follow the below links to install the ONAP.

https://docs.onap.org/en/beijing/submodules/oom.git/docs/oom_setup_kubernetes_rancher.html#onap-on-kubernetes-with-rancher

https://docs.onap.org/en/beijing/submodules/oom.git/docs/oom_quickstart_guide.html

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12446): https://lists.onap.org/g/onap-discuss/message/12446
Mute This Topic: https://lists.onap.org/mt/25721303/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [modeling] Call for agenda 9/18/2018 modeling meeting

[Lingli Deng]

Dear Modelers,
 
Andy and I would like to reformulate our session application based on the wiki. Here is the tentative agenda items for this week,





Duration


Agenda Item


Requested by


Notes / Links




START RECORDING




 5


New cochair welcome


Hui Deng  &
Andy Mayer






 5


 Resource IM report


 Xu Yang


 




 5


 Service IM report


 Lingli Deng


 




 5


 DM report


 Anatoly Katzman


 




 5


 M4 discussion


 Hui Deng &
Andy Mayer


 




 


 ?


 Mehmet Toy


 




 
 
Feel free to add any other items you may have at :
https://wiki.onap.org/display/DW/Modeling+2018-09-18
 
Thanks
 
Co-chairs
 











_._,_._,_

Links:

You receive all messages sent to this group.




View/Reply Online (#12445) |



Reply To Group
| Reply To Sender



|



Mute This Topic


| New Topic





Your Subscription |
Contact Group Owner |

Unsubscribe

 [arch...@mail-archive.com]
_._,_._,_

[onap-discuss] [modeling] Call for agenda 9/18/2018 modeling meeting

[denghui (L)]

Dear Modelers,

Andy and I would like to reformulate our session application based on the wiki. 
Here is the tentative agenda items for this week,
Duration

Agenda Item

Requested by

Notes / Links

START RECORDING

 5

New cochair welcome


Hui Deng  & Andy 
Mayer

 5

 Resource IM report

 Xu Yang



 5

 Service IM report

 Lingli Deng



 5

 DM report

 Anatoly Katzman



 5

 M4 discussion


 Hui Deng & Andy 
Mayer





 ?

 Mehmet Toy





Feel free to add any other items you may have at : 
https://wiki.onap.org/display/DW/Modeling+2018-09-18

Thanks

Co-chairs


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12444): https://lists.onap.org/g/onap-discuss/message/12444
Mute This Topic: https://lists.onap.org/mt/25720653/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-