[onap-discuss] happy Woman's day

[Gaurav Gupta (c)]

To All the womans out there in ONAP Community


Happy International Woman's day



thanks

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] OOM Resource Requirement

[Gaurav Gupta (c)]

Alex , Lusheng


Just one last question - does these resource requirement also considers 
resource and Network needed for vFW and vDNS Demo


thanks

Gaurav






From: JI, LUSHENG (LUSHENG) <l...@research.att.com>
Sent: 05 January 2018 03:05:40
To: Alexis de Talhouët
Cc: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] OOM Resource Requirement


Thanks Alexis!

Lusheng



From: Alexis de Talhouët <adetalhoue...@gmail.com>
Date: Thursday, January 4, 2018 at 4:30 PM
To: "JI, LUSHENG (LUSHENG)" <l...@research.att.com>
Cc: "Gaurav Gupta (c)" <guptagau...@vmware.com>, "onap-discuss@lists.onap.org" 
<onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] OOM Resource Requirement



Hi, yes, typo. I fixed. it.



I see, it’s based on my deployment. It used only m1.large flavor, which have 8 
vCPU, 16G RAM and 160G storage.

So based on what you just told me, here are the new accurate requirements:



HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses



OOM

  *   17 VM
  *   54 vCPU
  *   156 GB RAM
  *   1020 GB Storage
  *   15 floating IP addresses



DCAE itself

  *   15 VM
  *   44 vCPU
  *   88 GB RAM
  *   880 GB Storage
  *   15 floating IP addresses



Thanks,

Alexis





On Jan 4, 2018, at 4:24 PM, JI, LUSHENG (LUSHENG) 
<l...@research.att.com<mailto:l...@research.att.com>> wrote:



Alexis,



The 2GB RAM for DCAE is probably a typo?



Not sure what VM flavors you use in your deployment.  Among the 15 DCAE VMs, 7 
(CDAP/Hadoop cluster) need to be m1.large size (4 vCPU, 8G RAM, 80G storage) 
and the rest are m1.medium size (2 vCPUs, 4G RAM, 40G storage).



So the total should be 44 vCPUs, 88G RAM, and 880G disk.  The actual usage of 
disk is much smaller.  So if there were a flavor supporting smaller disks (e.g. 
20% of current values), the disk usage can be smaller.



Lusheng





From: 
<onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Alexis de Talhouët 
<adetalhoue...@gmail.com<mailto:adetalhoue...@gmail.com>>
Date: Thursday, January 4, 2018 at 4:02 PM
To: "Gaurav Gupta (c)" <guptagau...@vmware.com<mailto:guptagau...@vmware.com>>
Cc: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
<onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>>
Subject: Re: [onap-discuss] OOM Resource Requirement



FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.



HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses

OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses

DCAE itself

  *   15 VM
  *   113 vCPU
  *   2 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses

Hope it helps,

Alexis



On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët 
<adetalhoue...@gmail.com<mailto:adetalhoue...@gmail.com>> wrote:



Guarav, here are the exact numbers for DCAE requirement.



15 instances

113 vCPU

226 GB RAM

2260 GB disk

15 floating IP




On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët 
<adetalhoue...@gmail.com<mailto:adetalhoue...@gmail.com>> wrote:



Gaurav, happy new year to you to! See answers inline.




On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) 
<guptagau...@vmware.com<mailto:guptagau...@vmware.com>> wrote:



Alexis , Michael



Happy new year ,



I had couple of questions



a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .



AdT:

- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk

- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)

- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)








b - How many VM if we were to use Rancher based OOM Setup .



AdT: As specified above, only one VM for Rancher.




c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .



AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.








thanks

Gaurav








___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] OOM Resource Requirement

[Gaurav Gupta (c)]

Alexis , Michael


Happy new year ,


I had couple of questions


a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .

b - How many VM if we were to use Rancher based OOM Setup .

c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .



thanks

Gaurav


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. Error: Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process

[Gaurav Gupta (c)]

Milind


Did you have service distributed succesfully?


thanks

Gaurav




From: Milind Jalwadi <mili...@techmahindra.com>
Sent: 15 December 2017 12:20:27
To: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. 
Error: Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process


Thanks Gaurav. I did look at the URL you provided, but the error that I am 
getting seems to be a different one. Below is the error snap –



[cid:image003.jpg@01D3759F.0F3ECC60]



Thanks,

Milind

+91 9011 037298



From: Gaurav Gupta (c) [mailto:guptagau...@vmware.com]
Sent: Thursday, December 14, 2017 10:03 PM
To: Milind Jalwadi <mili...@techmahindra.com>; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. 
Error: Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process



Milind



There are some error listed and their resolution on the wiki below .

https://wiki.onap.org/display/DW/running+vFW+Demo+on+ONAP+Amsterdam+Release<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_running-2BvFW-2BDemo-2Bon-2BONAP-2BAmsterdam-2BRelease=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=IR2mHbO087t6P5ZNzjStBjt97YKuIzTiCH8WE-XA3LI=>



what error do you see on screen



Thanks

Gaurav









From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
<onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Milind Jalwadi 
<mili...@techmahindra.com<mailto:mili...@techmahindra.com>>
Sent: 14 December 2017 18:54
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. Error: 
Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process



Not able to add VNF from VID GUI. Below is the SO log from BPMN directory. 
Could anyone suggest where to look for any additional debug information or any 
thoughts on the cause and resolution?



--

2017-12-14T09:59:55.218Z|2017-12-14T09:59:55.218Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.CREVI|BPMNClient|COMPLETE|0|FalloutHandler
 request: http://org.openecomp/mso/workflow/schema/v1<https://urldefense.proofpoint.com/v2/url?u=http-3A__org.openecomp_mso_workflow_schema_v1=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=5a2vCdrHDNIsBTOucmB6XS6rlR3Y5VAlJNfccAwsQnI=>"

 
xmlns:ns="http://org.openecomp/mso/request/types/v1<https://urldefense.proofpoint.com/v2/url?u=http-3A__org.openecomp_mso_request_types_v1=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=aoINSe5J_CaSLqR04ITBE-jFaQLUr2xf_owhsvnoYqU=>"

 
xmlns:wfsch="http://org.openecomp/mso/workflow/schema/v1<https://urldefense.proofpoint.com/v2/url?u=http-3A__org.openecomp_mso_workflow_schema_v1=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=5a2vCdrHDNIsBTOucmB6XS6rlR3Y5VAlJNfccAwsQnI=>">

   http://org.openecomp/mso/infra/vnf-request/v1<https://urldefense.proofpoint.com/v2/url?u=http-3A__org.openecomp_mso_infra_vnf-2Drequest_v1=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=kSP3fWDQ-G39QVJ7fIRE0IpS5zVcTOFyKT6dTTyx-5U=>">


83d57c39-038a-4a62-873b-96f0d0db1975

CREATE

VID

   

http://org.openecomp/mso/workflow/schema/v1<https://urldefense.proofpoint.com/v2/url?u=http-3A__org.openecomp_mso_workflow_schema_v1=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=MQA97cmJ-OuEJCfgzivnzEC4p9x68gXanjRHUuAG65Q=5a2vCdrHDNIsBTOucmB6XS6rlR3Y5VAlJNfccAwsQnI=>">


Internal Error - Occurred in CreateVnfInfra QueryCatalogDB 
Process


2500




|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T09:59:55.222Z|2017-12-14T09:59:55.222Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.CREVI|BPMNClient|COMPLETE|0|FH_request_id:
 
83d57c

Re: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. Error: Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process

[Gaurav Gupta (c)]

Milind


There are some error listed and their resolution on the wiki below .

https://wiki.onap.org/display/DW/running+vFW+Demo+on+ONAP+Amsterdam+Release


what error do you see on screen


Thanks

Gaurav





From: onap-discuss-boun...@lists.onap.org  
on behalf of Milind Jalwadi 
Sent: 14 December 2017 18:54
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SO][VID] Not able to create VNF from VID GUI. Error: 
Internal Error - Occurred in CreateVnfInfra QueryCatalogDB Process


Not able to add VNF from VID GUI. Below is the SO log from BPMN directory. 
Could anyone suggest where to look for any additional debug information or any 
thoughts on the cause and resolution?



--

2017-12-14T09:59:55.218Z|2017-12-14T09:59:55.218Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.CREVI|BPMNClient|COMPLETE|0|FalloutHandler
 request: http://org.openecomp/mso/workflow/schema/v1;

 
xmlns:ns="http://org.openecomp/mso/request/types/v1;

 
xmlns:wfsch="http://org.openecomp/mso/workflow/schema/v1;>

   http://org.openecomp/mso/infra/vnf-request/v1;>


83d57c39-038a-4a62-873b-96f0d0db1975

CREATE

VID

   

http://org.openecomp/mso/workflow/schema/v1;>


Internal Error - Occurred in CreateVnfInfra QueryCatalogDB 
Process


2500




|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T09:59:55.222Z|2017-12-14T09:59:55.222Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.CREVI|BPMNClient|COMPLETE|0|FH_request_id:
 
83d57c39-038a-4a62-873b-96f0d0db1975|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T09:59:55.227Z|2017-12-14T09:59:55.227Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.CREVI|BPMNClient|COMPLETE|0|FH_ErrorCode:
 
2500|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T09:59:55.236Z|2017-12-14T09:59:55.236Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.FH|BPMNClient|COMPLETE|0|updateRequestInfraPayload:

http://schemas.xmlsoap.org/soap/envelope/; 
xmlns:req="http://org.openecomp.mso/requestsdb;>








83d57c39-038a-4a62-873b-96f0d0db1975


BPEL

Internal 
Error - Occurred in CreateVnfInfra QueryCatalogDB Process


FAILED

100








|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T09:59:55.313Z|2017-12-14T09:59:55.313Z|83d57c39-038a-4a62-873b-96f0d0db1975|N/A|Thread-272||MSO.FH|BPMNClient|COMPLETE|0|FalloutHandler
 Response: http://org.openecomp/mso/workflow/schema/v1;>

   Fallout Handler Succeeded

|f449ee64-d97c-4c1d-95d8-475f5cc25c69|INFO|0|172.18.0.3|0|mso.mso.testlab.openecomp.org|172.18.0.3

2017-12-14T10:03:46.873Z|2017-12-14T10:03:46.873Z|25455a79-f3a8-4c84-8037-22429be73a9a|N/A|Thread-273||MSO.CreateVnfInfra|BPMNClient|COMPLETE|0|[WRKFLOW-RESOURCE]Call
 to MSO workflow/services in Camunda. Received MSO startProcessInstanceByKey 
with processKey:CreateVnfInfra and variables: {serviceType=, 
isBaseVfModule=false, vfModuleId=, vfModuleType=, requestAction=createInstance, 
mso-business-key=e2df21f2-6944-4e96-88a9-35800d9f53c0, 
mso-request-id=25455a79-f3a8-4c84-8037-22429be73a9a, volumeGroupId=, 
serviceInstanceId=1f883881-59cd-40f3-9dfb-4a4fefece076, 
vnfType=vDummyVNFService1/vDummy1-VSP 0, 
requestId=25455a79-f3a8-4c84-8037-22429be73a9a, host=mso, 
bpmnRequest={"requestDetails":{"modelInfo":{"modelInstanceName":"vDummy1-VSP 

Re: [onap-discuss] Issues with Kubectl setup and newly pulled dockers not showing in kubectl list ---namespace

[Gaurav Gupta (c)]

thanks Alexis


response in line .

with best regards
gaurav

From: Alexis de Talhouët <adetalhoue...@gmail.com>
Sent: 06 December 2017 19:57
To: Gaurav Gupta (c)
Cc: onap-discuss@lists.onap.org; Michael O'Brien; Ramesh Tammana; Ramki 
Krishnan; Arun Arora (c)
Subject: Re: Issues with Kubectl setup and newly pulled dockers not showing in 
kubectl list ---namespace

Hi,

Some answers inline.

Thanks,
Alexis

On Dec 6, 2017, at 8:34 AM, Gaurav Gupta (c) 
<guptagau...@vmware.com<mailto:guptagau...@vmware.com>> wrote:

Hi All , Michal , Alexis

We are into 2 very distinct issues while trying vDNS Demo on OOM .

issue 1 - kubectl
 post following below information .
 1. curl -LO 
https://storage.googleapis.com/kubernetes-release/release/v1.7.0/bin/linux/amd64/kubectl<https://urldefense.proofpoint.com/v2/url?u=https-3A__storage.googleapis.com_kubernetes-2Drelease_release_v1.7.0_bin_linux_amd64_kubectl=DwMFaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sMfOd3IsgFDEQjC8M-dExvTijIpkq549dAV5SUgIXqA=U5DyMgpJ6JviFTgJx26Y47cLxgUN47vVnIn0wQINhtw=>
  2. chmod +x ./kubectl
  3. mv kubectl /usr/local/bin
   4 setting up config in ~/.kube/config

5. while running kubectl cluster-info an dump

oot@k8s-node-0-30a414d1-5a13-41a5-a15a-5970f7fb74ed:~/.kube# kubectl 
cluster-info dump
Unable to connect to the server: dial tcp 10.110.208.207:443: i/o timeout

root@k8s-node-0-30a414d1-5a13-41a5-a15a-5970f7fb74ed:~/.kube# kubectl 
cluster-info
Kubernetes master is running at 
https://10.110.208.207:443/<https://urldefense.proofpoint.com/v2/url?u=https-3A__10.110.208.207-3A443_=DwMFaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sMfOd3IsgFDEQjC8M-dExvTijIpkq549dAV5SUgIXqA=J_jRQV7D3-6OX_JlBX4KkAVZGq0KIka2-kSq-bZfJlw=>

AdT: I’m not sure to understand the issue been raised here. Can you clarify?

[Gaurav ] -  I think I have some issues with  kubectl setup  so if some one has 
attempted the kubectl installation and faced similar issues and resolved them , 
It will help me as well .
This is needed so that OOM based deployment can be done and health check 
scripts refers to kubectl commands .

issue 2 - We pulled 2 esr dockers manually  inside our OOM deployment . However 
the new dockers are not getting listed in kubectl commands .  So, essentially 
these containers dont have any specific IP address attached to them along with 
the port.

  questions
 -  Are we missing something - I mean is this even valid 
operation in OOM ?  .

AdT: Pulling docker images and starting them will not make them appear in 
Kubernetes UI. For that, you need to create Kubernetes manifests defining the 
deployment, e.g. how the docker container should looks like (port, entrypoint, 
volume, pre-conditions, …) and the service, exposing the ports defined in the 
deployment to the external world (when using NodePort).

[Gaurav ] - The use case is - we had OOM Deployement done with few dockers , 
But we wanted to pull 2 more dockers i.e esr and esr gui . We did pull the 
dockers from nexsus repo  but we donot see them getting listed in the kubectl 
list --namespaces .Due to this we are also assuming that No Port /IP Address is 
getting assigned to those .
Can this use work or we have to do a complete OOM Deployment fresh ?  .


 -is there anything else that  we should be doing in this 
situation ? .

thanks in advance

with best regards
gaurav

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Issues with Kubectl setup and newly pulled dockers not showing in kubectl list ---namespace

[Gaurav Gupta (c)]

Hi All , Michal , Alexis


We are into 2 very distinct issues while trying vDNS Demo on OOM .


issue 1 - kubectl

 post following below information .

 1. curl -LO 
https://storage.googleapis.com/kubernetes-release/release/v1.7.0/bin/linux/amd64/kubectl

  2. chmod +x ./kubectl

  3. mv kubectl /usr/local/bin

   4 setting up config in ~/.kube/config


5. while running kubectl cluster-info an dump


oot@k8s-node-0-30a414d1-5a13-41a5-a15a-5970f7fb74ed:~/.kube# kubectl 
cluster-info dump
Unable to connect to the server: dial tcp 10.110.208.207:443: i/o timeout

root@k8s-node-0-30a414d1-5a13-41a5-a15a-5970f7fb74ed:~/.kube# kubectl 
cluster-info
Kubernetes master is running at https://10.110.208.207:443/



issue 2 - We pulled 2 esr dockers manually  inside our OOM deployment . However 
the new dockers are not getting listed in kubectl commands .  So, essentially 
these containers dont have any specific IP address attached to them along with 
the port.


  questions

 -  Are we missing something - I mean is this even valid 
operation in OOM ?  .

 -is there anything else that  we should be doing in this 
situation ? .


thanks in advance


with best regards

gaurav

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] vFWCL Toplogy and related IP Questions

[Gaurav Gupta (c)]

Thanks Alexis .


This will surely help me .


thanks

gaurav


From: Alexis de Talhouët <adetalhoue...@gmail.com>
Sent: 04 December 2017 18:54:27
To: Gaurav Gupta (c)
Cc: onap-discuss@lists.onap.org; Michael O'Brien
Subject: Re: [onap-discuss] vFWCL Toplogy and related IP Questions

Hi, the router is being created during the instantiation. See bellow topology.

[cid:548B1ED3-9471-4770-99F2-BCD921B12881@bell.corp.bce.ca]

On Dec 4, 2017, at 5:19 AM, Gaurav Gupta (c) 
<guptagau...@vmware.com<mailto:guptagau...@vmware.com>> wrote:

Hi Michael , all

I had couple of question about vFwCL Network Toplogy .


  1.  did  the people having successful vFwCL can see something in the graph   
  .

This port isn’t open:
root@vfw-sinc-vnf:~# ss -an | grep 667
root@vfw-sinc-vnf:~#


  2. did you create the Router on Horizon prior to vFW  SDNC preLoad as 
part of service instantiation .

No, it got created during the instantiation.


basically i am doing few additional steps But each reboot of Firewall /Sink VM/ 
PktGen is causing a change in behavior hence the
question .

Below is the network toplogy for your reference .





thanks in advance
with best regards
gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
https://lists.onap.org/mailman/listinfo/onap-discuss<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.onap.org_mailman_listinfo_onap-2Ddiscuss=DwMFaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=zDIKbyJ2CuLpEgZ3PvINjYfeBkjiyD8icou91UVZE_w=IinezPOBrc7B1G6AshUAKar-I3PMZGT58KMlU3a9Vtc=>

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] vFWCL Toplogy and related IP Questions

[Gaurav Gupta (c)]

Hi Michael , all


I had couple of question about vFwCL Network Toplogy .


  1.  did  the people having successful vFwCL can see something in the graph   
  .

  2. did you create the Router on Horizon prior to vFW  SDNC preLoad as 
part of service instantiation .


basically i am doing few additional steps But each reboot of Firewall /Sink VM/ 
PktGen is causing a change in behavior hence the

question .


Below is the network toplogy for your reference .



[cid:a1e5f4eb-d4de-4c58-a859-d80a3cf77a89]



thanks in advance

with best regards

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Error when distributing service models

[Gaurav Gupta (c)]

if you are using Heat based ONAP .

can you check your healthcheck status from Robot VM .


pls fix that and refer to the link below


https://wiki.onap.org/display/DW/running+vFW+Demo+on+ONAP+Amsterdam+Release

running vFW Demo on ONAP Amsterdam Release - Developer 
...
wiki.onap.org
Quick Search. Help. Online Help Keyboard Shortcuts Feed Builder What’s new


thanks

Gaurav


From: onap-discuss-boun...@lists.onap.org  
on behalf of abdelmuhaimen.sea...@orange.com 
Sent: 27 November 2017 18:50:54
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] Error when distributing service models


Hi, Do you know what should I do to troubleshoot the issue below ?



My SO cannot communicate with AAI, and it gives me the following error when I 
try to distribute a new service model from SDC.



SDC:

2017-11-27T13:01:41.673Z|||57d55483-8f51-4f51-8d18-ba2257198476||qtp2116908859-8629338|||SDC-BEINFO||172.17.0.5||10.0.3.1|10.0.1.1|o.o.s.b.a.i.AuditingLogFormatUtil||ActivityType=,
 Desc=

2017-11-27T13:01:41.687Z|||57d55483-8f51-4f51-8d18-ba2257198476||qtp2116908859-8629338|||SDC-BEINFO||172.17.0.5||10.0.3.1|10.0.1.1|o.o.s.b.a.i.AuditingLogFormatUtil||ActivityType=,
 Desc=

2017-11-27T13:01:41.711Z|||57d55483-8f51-4f51-8d18-ba2257198476||qtp2116908859-8629338|||SDC-BEINFO||172.17.0.5||10.0.3.1|10.0.1.1|o.o.s.b.a.i.AuditingLogFormatUtil||ActivityType=,
 Desc=

2017-11-27T13:01:41.725Z|||57d55483-8f51-4f51-8d18-ba2257198476||qtp2116908859-8629338|||SDC-BEINFO||172.17.0.5||10.0.3.1|10.0.1.1|o.o.s.b.a.i.AuditingLogFormatU



AAI-ML:



2017-11-27T12:00:41.728Z||Timer-0|ModelLoader||org.onap.aai.modelloader.service.SdcConnectionJob||ERROR|MDLSVC2001E|MDLSVC2001E
 Unable to register with ASDC: Failed to initialize distribution client: ASDC 
server problem|

2017-11-27T12:01:41.540Z||Timer-0|ModelLoader||org.openecomp.sdc.impl.DistributionClientImpl||INFO|DistributionClient
 - init

2017-11-27T12:01:41.655Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||WARN|POST
 
http://10.0.11.1:3904/apiKeys/create
 will send credentials over a clear channel.

2017-11-27T12:01:41.655Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||INFO|POST
 
http://10.0.11.1:3904/apiKeys/create
 (as 1lnCfdEBY3DyDwid) ...

2017-11-27T12:01:41.665Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||INFO|
 --> HTTP/1.1 200 OK

2017-11-27T12:01:41.736Z||Timer-0|ModelLoader||org.openecomp.sdc.http.AsdcConnectorClient||ERROR|status
 from ASDC is 
org.openecomp.sdc.http.HttpAsdcResponse@41ed7ddd

2017-11-27T12:01:41.736Z||Timer-0|ModelLoader||org.openecomp.sdc.http.AsdcConnectorClient||ERROR|DistributionClientResultImpl
 [responseStatus=ASDC_SERVER_PROBLEM, responseMessage=ASDC server problem]

2017-11-27T12:01:41.736Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||WARN|DELETE
 
http://10.0.11.1:3904/apiKeys/WDqYsclRo4TjUCLe
 will send credentials over a clear channel.

2017-11-27T12:01:41.736Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||INFO|DELETE
 
http://10.0.11.1:3904/apiKeys/WDqYsclRo4TjUCLe
 (as WDqYsclRo4TjUCLe) ...

2017-11-27T12:01:41.741Z||Timer-0|ModelLoader||com.att.nsa.apiClient.http.HttpClient||INFO|
 --> HTTP/1.1 200 OK

2017-11-27T12:01:41.741Z||Timer-0|ModelLoader||org.onap.aai.modelloader.service.SdcConnectionJob||ERROR|MDLSVC2001E|MDLSVC2001E
 Unable to register with ASDC: Failed to initialize distribution client: ASDC 
server problem|



Thanks



Abdelmuhaimen Seaudi

Orange Labs Egypt

Email: abdelmuhaimen.sea...@orange.com

Mobile: +2012 84644 733

[onap-discuss] query About MSB and MSB_IP_Address

[Gaurav Gupta (c)]

Hi All


While running the vFW Demo - We are trying to look for which VM is hosting MSB  
.


As per the robot HealthCheck also we donot see MSB  .

We also donot see any mention of MSB Host VM or container inside ONAP heat 
environment file .


can some one pls help us with this information .


thanks in advance for the same



with best regards

gaurav



___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Service distribution WorkFlow across various sdc/mso/aai/sdnc/v Containers via SDC Gui by Ops user

[Gaurav Gupta (c)]

 All , Michael


While chasing the issue of Service distribution via SDC Gui and using VID to 
Deploy Service failing .

There are certain dots that are missing while trying to establish due to which 
ONAP Container that issues is coming .


For example in Distribution Flow


Following are the Docker container that plays a role in Service Onboarding 
workFlow . Can this be confirmed ? .


sdc-fe container -> msotestlab_1

sdc-fe container ->  aai_resource

sdc-fe container  ->  sdnc-ueblistener


Please note that is based on the information on the below links .

https://wiki.onap.org/pages/viewpage.action?pageId=3246170

https://wiki.onap.org/display/DW/Tutorial%3A+Verifying+and+Observing+a+deployed+Service+Instance#Tutorial:VerifyingandObservingadeployedServiceInstance-vFirewallFlow

Tutorial: Verifying and Observing a deployed Service 
...
wiki.onap.org
How many of the 10 TG streams is running is TBD? TBD: the exact nature of what 
enabling 5 of the 10 TGs is? TBD: what exactly is the correlation between the 
SEC ...


thanks in advance for helping on this  .


thanks and regards

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SO Init errors

[Gaurav Gupta (c)]

Hello Seshu , All


We have seen two error with latest SO Docker . We have update the comments in 
JIRA Ticket SO-316 as two different comments for each of the error seen 
indicated below .


Error 1 - Null Pointer Exception



oot@mso:/logs/EELF# cat error.log
2017-11-14 09:15:39,121||ServerService Thread Pool -- 
87|contextInitializedERROR|AvailabilityError|| MSO-RA-5210E Configuration 
error:Unknown. MSO Properties failed to initialize completely
2017-11-14 09:15:39,137||ServerService Thread Pool -- 
87|contextInitializedERROR|AvailabilityError|| MSO-GENERAL-9400E Exception: 
java.lang.NullPointerException -at 
org.openecomp.mso.openstack.utils.CloudConfigInitializer.contextInitialized(CloudConfigInitializer.java:65)
 -  at 
io.undertow.servlet.core.ApplicationListeners.contextInitialized(ApplicationListeners.java:187)
 -at 
io.undertow.servlet.core.DeploymentManagerImpl$1.call(DeploymentManagerImpl.java:200)
 -at 
io.undertow.servlet.core.DeploymentManagerImpl$1.call(DeploymentManagerImpl.java:171)
 -at



Error 2 - cadi.properties file not present in /etc/mso/config.d


this is seen inside /var/log/ecomp/workflowmessageAdaptor/errormso.log

2017-11-14T10:39:00.001Z||EJB default - 
2|reloadCloudConfigERROR|PermissionError||MSO-GENERAL-5412E Missing or 
invalid properties file: /etc/mso/config.d/cadi.properties
2017-11-14T10:39:00.005Z||EJB default - 
2|reloadCloudConfigERROR|PermissionError||MSO-GENERAL-9400E Exception: 
java.io.FileNotFoundException: /etc/mso/config.d/cadi.properties (No such file 
or directory) - at java.io.FileInputStream.open0(Native



thanks
gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SO throwing Null Pointer Exception and unable to reload the Cloud Configuration

[Gaurav Gupta (c)]

Seshu


The Code highlighted in the red below is throwing null poiint exception due to 
file Not found / File name not given  and due to which MSO is not able to 
reload the CloudConfig


File 
/mso/adapters/mso-adapter-utils/src/main/java/org/openecomp/mso/cloud/CloudConfigFactory.java



public void reloadCloudConfig () {



try {

if (!rwl.writeLock ().tryLock () && !rwl.writeLock ().tryLock (30L, 
TimeUnit.SECONDS)) {

LOGGER.debug ("Busy write lock on mso cloud config factory, 
skipping the reloading");

return;

}

} catch (InterruptedException e1) {

LOGGER.debug ("Interrupted while trying to acquire write lock on 
cloud config factory, skipping the reloading");

Thread.currentThread ().interrupt ();

return;

}

try {

//LOGGER.debug ("Processing a reload of the mso properties file 
entries");

try {



if (refreshTimer <= 1) {

CloudConfig oldCloudConfig = null;

if (cloudConfigCache.isValidCloudConfig()) {

oldCloudConfig = cloudConfigCache.clone();

}

cloudConfigCache.reloadPropertiesFile ();

refreshTimer = cloudConfigCache.refreshTimerInMinutes;

if (!cloudConfigCache.equals(oldCloudConfig)) {

LOGGER.info (MessageEnum.RA_CONFIG_LOAD, 
prefixMsoPropertiesPath + cloudConfigCache.configFilePath, "", "");

}



} else {

--refreshTimer;

}



}


for your quick reference - stack trace of the code is as below

at org.openecomp.mso.cloud.CloudConfig.loadCloudConfig(CloudConfig.java:183) - 
at 
org.openecomp.mso.cloud.CloudConfig.reloadPropertiesFile(CloudConfig.java:169) 
- at 
org.openecomp.mso.cloud.CloudConfigFactory.reloadCloudConfig(CloudConfigFactory.java:151)
 -


Can you pls help

with best regards
gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] SO Error - ONAP 1.1

[Gaurav Gupta (c)]

Seshu , Radhika


We followed the  https://jira.onap.org/browse/SO-208?src=confmacro  . We pulled 
the Latest MSO Dockers from Nexus Repo but we are still seeing the error for 
MSO Indicating the Init not complete  .


2017-11-07 12:18:18,704||ServerService Thread Pool -- 
75|contextInitializedERROR|AvailabilityError|| MSO-RA-5210E Configuration 
error:Unknown. MSO Properties failed to initialize completely
2017-11-07 12:18:18,705||ServerService Thread Pool -- 
75|contextInitializedERROR|AvailabilityError|| MSO-GENERAL-9400E Exception: 
java.lang.NullPointerException -  at 
org.openecomp.mso.openstack.utils.CloudConfigInitializer.contextInitialized(CloudConfigInitializer.java:65)
 -at 
io.undertow.servlet.core.ApplicationListeners.contextInitialized(ApplicationListeners.java:187)
 -at

Do let us know how to move forward on this .


thanks

gaurav




From: Radhika Kaslikar <radhika.kasli...@infosys.com>
Sent: 07 November 2017 16:23
To: seshu.kuma...@huawei.com; Gaurav Gupta (c)
Cc: onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] SO Error - ONAP 1.1


Hi Seshu,



We are facing the same issue with MSO.

On running health check, MSO is failing

Basic MSO Health Check| FAIL |

503 != 200






And on checking the logs I see the following error :

2017-11-06 19:14:21,766||ServerService Thread Pool -- 
75|contextInitializedERROR|AvailabilityError|| MSO-RA-5210E Configuration 
error:Unknown. MSO Properties failed to initialize completely

2017-11-06 19:14:21,786||ServerService Thread Pool -- 
75|contextInitializedERROR|AvailabilityError|| MSO-GENERAL-9400E Exception: 
java.lang.NullPointerException - at 
org.openecomp.mso.openstack.utils.CloudConfigInitializer.contextInitialized(CloudConfigInitializer.java:65)
 -




Can you please tell us how can we solve this.


Thanks and Regards,

Radhika.



From: Pranay Nawghare [prana...@gmail.com]
Sent: Tuesday, November 07, 2017 4:09 PM
To: Radhika Kaslikar
Subject: Fwd: [onap-discuss] SO Error - ONAP 1.1

-- Forwarded message --
From: "Gaurav Gupta (c)" <guptagau...@vmware.com<mailto:guptagau...@vmware.com>>
Date: 06-Nov-2017 11:19 PM
Subject: [onap-discuss] SO Error - ONAP 1.1
To: "Seshu m" <seshu.kuma...@huawei.com<mailto:seshu.kuma...@huawei.com>>
Cc: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
<onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>>


Seshu


We needed some help in SO due to some unexplained error seen . Also can you 
also help us with what are the important configuration file in 
/etc/mso/config.d files and what should be the good value in those files .


Error seen in SO .


at 
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) 
-  at java.lang.Thread.run(Thread.java:748) -  at 
org.jboss.threads.JBossThread.run(JBossThread.java:320) -

2017-11-03 01:45:00,002||EJB default - 
2|reloadMsoPropertiesERROR|PermissionError|| MSO-GENERAL-5412E Missing or 
invalid properties file: /etc/mso/config.d/mso.vfc.properties
2017-11-03 01:45:00,003||EJB default - 
2|reloadMsoPropertiesERROR|PermissionError|| MSO-GENERAL-9400E Exception: 
java.io.FileNotFoundException: /etc/mso/config.d/mso.vfc.properties (No such 
file or directory) -  at java.io.FileInputStream.open0(Native Method) -  at 
java.io.FileInputStream.open(FileInputStream.java:195) -  at 
java.io.FileInputStream.(FileInputStream.java:138) -  at



.after we copied mso.vnf.properties  to mso.vfc.properties and restart mso test 
lab container

the error changes to


2017-11-06 12:37:31,707||ServerService Thread Pool -- 
82|contextInitializedERROR|AvailabilityError|| MSO-RA-5210E Configuration 
error:Unknown. MSO Properties failed to initialize completely

2017-11-06 12:37:31,729||ServerService Thread Pool -- 
82|contextInitializedERROR|AvailabilityError|| MSO-GENERAL-9400E Exception: 
java.lang.NullPointerException



with best regards

Gaurav



___
onap-discuss mailing list
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
https://lists.onap.org/mailman/listinfo/onap-discuss<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.onap.org_mailman_listinfo_onap-2Ddiscuss=DwMFAw=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=azSyqqFKmLb7QVCRwl2xBRGZZtB5RMuot-kVFUgVbv8=cKxvNXi9idlR_ubniXJ6FnNPREGAXr2rMLMOCYmtx50=>

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SO Error - ONAP 1.1

[Gaurav Gupta (c)]

Seshu


We needed some help in SO due to some unexplained error seen . Also can you 
also help us with what are the important configuration file in 
/etc/mso/config.d files and what should be the good value in those files .


Error seen in SO .


at 
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) 
-  at java.lang.Thread.run(Thread.java:748) -  at 
org.jboss.threads.JBossThread.run(JBossThread.java:320) -

2017-11-03 01:45:00,002||EJB default - 
2|reloadMsoPropertiesERROR|PermissionError|| MSO-GENERAL-5412E Missing or 
invalid properties file: /etc/mso/config.d/mso.vfc.properties
2017-11-03 01:45:00,003||EJB default - 
2|reloadMsoPropertiesERROR|PermissionError|| MSO-GENERAL-9400E Exception: 
java.io.FileNotFoundException: /etc/mso/config.d/mso.vfc.properties (No such 
file or directory) -  at java.io.FileInputStream.open0(Native Method) -  at 
java.io.FileInputStream.open(FileInputStream.java:195) -  at 
java.io.FileInputStream.(FileInputStream.java:138) -  at



.after we copied mso.vnf.properties  to mso.vfc.properties and restart mso test 
lab container

the error changes to


2017-11-06 12:37:31,707||ServerService Thread Pool -- 
82|contextInitializedERROR|AvailabilityError|| MSO-RA-5210E Configuration 
error:Unknown. MSO Properties failed to initialize completely

2017-11-06 12:37:31,729||ServerService Thread Pool -- 
82|contextInitializedERROR|AvailabilityError|| MSO-GENERAL-9400E Exception: 
java.lang.NullPointerException



with best regards

Gaurav


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Failed demo install using "openstack vanilla" heat template

[Gaurav Gupta (c)]

Michael


We had  the same issue and followed your suggestion and were ok .  thanks for 
the same


Aparently have you tried  < running curl command > in isolation  and did you 
observe your download speed of pulling docker-compose.yml .We have noticed that 
everytime it drops to "zero" or low values . there are issues in pulling 
docker-compose.yml file completely . We tried it 2-3 times and we see same 
behaviour .

We are trying to establish where and why  is this coming from  .

Is this due to -- Load on the Server where docker-compose.yml residing  being 
High ?>  or

 or Big file size plays  a Role ?  or there is something in the infrastructure 
and environment that is causing this intermittent behaviour .  .


thanks

Gaurav


From: onap-discuss-boun...@lists.onap.org  
on behalf of Michael Still 
Sent: 31 October 2017 06:29
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] Failed demo install using "openstack vanilla" heat 
template

Hi,

I am using the openstack vanilla heat templates [1] to bring up an ONAP demo 
stack using Vexxhost. The stack comes up just fine, but the portal doesn't 
appear to install correctly. When I run the portal_install.sh script manually, 
I get the following errors:

-


+ /opt/docker/docker-compose down

ERROR: The Compose file './docker-compose.yml' is invalid because:

Unsupported config option for services.portal-db: 'healthcheck'

services.portal-wms.depends_on contains an invalid type, it should be an array

services.portal-apps.depends_on contains an invalid type, it should be an array

+ /opt/docker/docker-compose up -d

ERROR: The Compose file './docker-compose.yml' is invalid because:

Unsupported config option for services.portal-db: 'healthcheck'

services.portal-wms.depends_on contains an invalid type, it should be an array

services.portal-apps.depends_on contains an invalid type, it should be an array

-

This docker bug [2] implies that I should specify version 2.1 of docker compose 
for the portal, but that's already done. However, using version 1.16.1 of 
docker-compose instead of 1.9 seems to fix the problem.

Is anyone else seeing these errors? Is the openstack vanilla heat template 
known to be currently working, or am I doing something weird?

Thanks heaps,
Michael



1: Specifically 
https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=heat/ONAP/onap_openstack.env;h=6a1593f5e4cf456b5d86d5464dd0faec59ad3e04;hb=master
2: 
https://github.com/docker/compose/issues/4610
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] ONAP 1.1 and HealthCheck pass requirement for attempting vFW/vDNS

[Gaurav Gupta (c)]

Hi There


in ONAP 1.1 we see that Number of health test  have been increased to 23 . what 
is the minimum number of health test and which healthtest be passed before vFW 
/vDNS Demo can be attempted . For example in ONAP 1.0 we can attempt the Demo 
only if the 9 out of 10 health test cases passed .



thanks

Gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Specifying the Cloud Region to run a service on in TOSCA Yaml file

[Gaurav Gupta (c)]

Hi All


is there a way to  specify the Cloud Region  into the  Service TOSCA Yaml File 
so that a Service or VNF Can be forced to run on a specific Cloud Region 
provided by a specific VIM .



thanks in advance


with best regards

Gaurav

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [SO] vCPE TOSCA infrastructure template

[Gaurav Gupta (c)]

dewayne , all


Is there a way by means of input to this TOSCA Template that - vCPE a Service 
and its related VF can be forced to run on  a specific VIM or Cloud .


I see some Info on ESR but Can that be mapped to MultiVIMConfig and Cloud Env 
present in the attached Template File



with best regards

Gaurav




From: onap-discuss-boun...@lists.onap.org  
on behalf of DeWayne Filppi 
Sent: 26 September 2017 13:47:53
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SO] vCPE TOSCA infrastructure template

For those unaware and interested, I've committed a TOSCA equivalent version of 
the HEAT vCPE infrastructure template into the demo project:  
>

-- DeWayne

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] sonar Test cases writing in vesagent/test and issues faced while compling

[Gaurav Gupta (c)]

Hi There


we are facing some issues while trying to run our sonar test cases at the time 
of compiling .


This is what we did - we referred the Test File present in  
/collector/ves/src/test/java/org/onap/dcae/vastest


While Compiling our Code using mvn clean install we are getting errors of 
unable to find the junit and Json packages .


We some how are not able to find out - where and what to set to get this going .

Aparently VESCollector in the same user build Environment is working fine . Any 
clue provided will be Highly appreciated .



Thanks

Gaurav


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] 20170907 DCAE Stability status (2 of 5) - fixed

[Gaurav Gupta (c)]

Michael


Congrats and this is interesting .

Looks Like we are sailing in the same boat and I thought it would be better to 
share the notes w.r.t to ONAP on VIO  deployment so far .


We would like to know if you have faced these issues and if there is something 
we are missing in our environment that should be setup right for DCAE that too 
DCAEGen-1

· We got Public-ip and private-ip are NULL and VM state is OPERATIONAL 
for DCAE-Controller VM.

· Robot health check status 9/10 , only DCAE health check  failed with 
error “Resolving variable '${resp.json()}' failed: JSONDecodeError: Expecting 
value: line 1 column 1 (char 0)”
This error slightly different from the error mentioned on 
https://wiki.onap.org/display/DW/ONAP+master+branch+Stabilization that is 
:Health check failed {u'service': u'cdap-helloworld', u'instance': u'iad4', 
u'status': u'UNDEPLOYED', u'healthTestStatus': u'YELLOW', 
u'healthTestMessageCode': u'Cluster not deployed'}”


 We are trying to deploy ONAP on VIO. Using the following YAML:
https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=heat/OpenECOMP/onap_openstack_float.yaml;h=659f94c93b9c5dfae02031ddcae82161ce927318;hb=refs/heads/master

We have been successfully deploy all 5 DCAE additional VM's and their dockers. 
To check the status of DCAE deployment we executed DCAEDebug.sh (attached) and 
we found some error with POSTGRES VM.


=== reports
__
|  service |   instance |   name |  
dns |  ip-assignment |   state |  public-ip 
| private-ip |
__
|  vm-cdap-cluster | NorthIndia | zldcNorthIndiaUPcdap00 | 
zldcNorthIndiaUPcdap00.dcae.simpledemo.openecomp.org | 10.110.208.231 | 
OPERATIONAL | 10.110.208.231 |  10.1.1.12 |
|  vm-cdap-cluster | NorthIndia | zldcNorthIndiaUPcdap01 | 
zldcNorthIndiaUPcdap01.dcae.simpledemo.openecomp.org | 10.110.208.232 | 

Re: [onap-discuss] Stabilized the ONAP master branch

[Gaurav Gupta (c)]

Ran , Carsten

on Further analysis of DCAE Deployment failure . We saw following error for all 
our DCAE VM after running the deploy-service-instance
bin/dcae-controller.sh deploy-service-instance -i $ZONE -s vm-docker-host-1
  . but the issue is - these error do not have the information /Log indicating 
to Which IP Address and Port a socket connection is being setup . Can this be 
corrected to at least have IP Address and Port Number printed in the Logs ..

java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:153)
at java.net.SocketInputStream.read(SocketInputStream.java:122)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:235)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:275)
at java.io.BufferedInputStream.read(BufferedInputStream.java:334)
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:707)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:650)
at 
sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1371)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:468)
at 
org.openecomp.ncomp.sirius.manager.JavaHttpClient.httpBinaryTransaction(JavaHttpClient.java:168)
at 
org.openecomp.ncomp.sirius.manager.AbstractClient.httpStringTransaction(AbstractClient.java:219)
at 
org.openecomp.ncomp.sirius.manager.AbstractClient.httpJsonTransaction(AbstractClient.java:205)
at 
org.openecomp.ncomp.sirius.manager.AbstractClient.operationPath2(AbstractClient.java:65)
at 
org.openecomp.ncomp.sirius.manager.AbstractClient.operation(AbstractClient.java:97)
at org.openecomp.ncomp.sirius.manager.AbstractClient$operation.call(Unknown 
Source)
at 
org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45)
at 
org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:110)
at 
org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:146)
at 
org.openecomp.ncomp.sirius.manager.console.Console.operation(Console.groovy:107)
at org.openecomp.ncomp.sirius.manager.console.Console.operation(Console.groovy)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at 
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at 
org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite$PogoCachedMethodSiteNoUnwrap.invoke(PogoMetaMethodSite.java:187)
at 
org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.call(PogoMetaMethodSite.java:68)
at 
org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45)
at 
org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:110)
at 
org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:138)
at deploy-service-instance.run(deploy-service-instance.groovy:50)
at groovy.lang.GroovyShell.runScriptOrMainOrTestOrRunnable(GroovyShell.java:261)
at groovy.lang.GroovyShell.run(GroovyShell.java:522)
at groovy.lang.GroovyShell.run(GroovyShell.java:511)
at groovy.ui.GroovyMain.processOnce(GroovyMain.java:650)
at groovy.ui.GroovyMain.run(GroovyMain.java:381)
at groovy.ui.GroovyMain.process(GroovyMain.java:367)
at groovy.ui.GroovyMain.processArgs(GroovyMain.java:126)
at groovy.ui.GroovyMain.main(GroovyMain.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at 
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.codehaus.groovy.tools.GroovyStarter.rootLoader(GroovyStarter.java:109)
at org.codehaus.groovy.tools.GroovyStarter.main(GroovyStarter.java:131)


with best regards
gaurav


From: Gaurav Gupta (c)
Sent: 22 August 2017 19:06
To: Josef Reisinger
Cc: onap-discuss@lists.onap.org; onap-discuss-boun...@lists.onap.org; Ran Pollak
Subject: Re: [onap-discuss] Stabilized the ONAP master branch


Thanks Josef


if you can send me the output of following script form your environment .It 
will be great . the other Info if you could share , PG and CDAP VM's have how 
many dockers running on each VM .


#!/bin/bash



PW=$(grep OPENSTACK-PASSWORD /opt/app/dcae-controller/config.yaml | sed 
s/OPENSTACK-PASSWORD:.//)



set -e



echo === config.yaml

cat /opt/app/dcae-controller/config.yaml | sed "s/$PW/XX/"




echo === docker

docker images

docker ps -a



ID=$(docker ps | grep dcae-controller: | cut -c1-12)





echo === docker logs

docker logs $ID 2>&1



echo === dcae-controller.sh.log

docker exec $ID cat 
/opt/app/dcae-controller-platform-server/logs/dcae-controller.sh.log

echo === reports

docker exec -e GROOVY_HOME=/opt/app/groovy-2.

Re: [onap-discuss] Stabilized the ONAP master branch

[Gaurav Gupta (c)]

Hello Ran


We are trying to Deploy DACE on VIO . We have been successful in rest of the 
VM's and their dockers But have issues in  Collector VM , PostGreSql and CDAP 
VM's .


The situation is - on Collector VM - 3 dockers are up and on PostgreSql and 
CDAP VM - there is no dockers   .


our DCAE VM's have Floating and Private ip assigned to . from inside the VM We 
can reach to open internet . We have tried on both the Release Version and 
situation is same .


Test.No

Project Name

Artifacts version

docker version

ONAPVersion/gerrit

DCAE Version

Observation

1

OPEN-ECOMP

1.1.0-SNAPSHOT

1.1-STAGING-latest

master

1.1.0

DCAE's 5 Additional VMs are created. Collector VM downloads 2 Dockers but NO 
Containers start

2

onap

1.1.0-SNAPSHOT

1.0-STAGING-latest

1.0.0

1.1.0

DCAE's 5 Additional VMs are created. Collector VM downloads 6 Dockers and start 
3 containers but the remaining dockers are not started





Whatever we tried have been captured in the given link -

. https://lists.onap.org/pipermail/onap-discuss/2017-July/002414.html .



with best regards

gaurav




From: Ran Pollak <ran.pol...@amdocs.com>
Sent: 22 August 2017 15:18
To: Gaurav Gupta (c)
Cc: onap-discuss@lists.onap.org
Subject: FW: [onap-discuss] Stabilized the ONAP master branch


Thanks Gaurav!



We attend to have a different format for the daily mail that will include all 
the Components with the relevant issues, so we will have DCAE as well.

Also if you can send me the relevant info regarding DCAE issues that will be 
very helpful !



BR,

Ran Pollak



From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Tuesday, August 22, 2017 06:35
To: Ran Pollak <ran.pol...@amdocs.com<mailto:ran.pol...@amdocs.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] Stabilized the ONAP master branch



Hi  Ran Pollak



amazing intiative . May I request you to include DACE Init issues also in your 
list of items to be resolved . Do let me know if you need any specifics of the 
issues .



with best regards

Gaurav





From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
<onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Ran Pollak <ran.pol...@amdocs.com<mailto:ran.pol...@amdocs.com>>
Sent: 21 August 2017 21:34
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: [onap-discuss] Stabilized the ONAP master branch



Hello ONAP Community Members,



This is the first Daily status for the ONAP community regarding the status of 
the Master branch, this format will change into all the ONAP components with 
their issues/Status and we will add also info regarding  “health-check” 
scenarios.

Part of our efforts to stabilize the 1.1 ONAP and certify Open loop, we are 
troubleshooting the issues and below is the issue we are now stuck at. We need 
more help on this since this is reported as high and still in Open state.



Bug


Module


Issue


State


Defect Aging


Resolution


-


AAI


Unable to deploy model loader docker in AAI


Closed


NA


Update the port numbers and restart the dockers


-


SO


Unable to connect to AAI due to SSL


Closed


NA


1. Comment the certificate part in java.security file resides in 
/etc/java-8-openjdk/security
2. Update mso.asdc.json located in /etc/mso/config.d path.


AAI-190<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_AAI-2D190=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=1OWfF7oUOY6tjenngZvE99gKYQYaGXwvFd0fd90XvxA=xj7XvnhCWnAzA1S8XZDhhZ5yA4XBFypyiptNHJNwkMk=>


AAI


AAI was not able to communicate with ASDC


Closed


NA


Stop and remove the old dockers, place new dockers and update the java.security 
file like above.


VID-38<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_VID-2D38=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=1OWfF7oUOY6tjenngZvE99gKYQYaGXwvFd0fd90XvxA=zkpfZpxYEtyVOV3qcSUdyZjVLTaBiIMIXGU135karQc=>


VID


Deploy button is not working in VID to distribute Model


Open


10 days


We have this issue reported and been followed up for more than ten days yet no 
update. Posted on community as well.




Please, if you have something to add or ask please contact me.



BR,

Ran Pollak

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at 
https://www.amdocs.com/about/email-disclaimer<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amdocs.com_about_email-2Ddisclaimer=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=1OWfF7oUOY6tjenngZvE99gK

Re: [onap-discuss] [DCAE] DCAE 1.1 issues

[Gaurav Gupta (c)]

Bharath


Can you check the following thread . 
https://lists.onap.org/pipermail/onap-discuss/2017-July/002414.html .

One more info needed - what is your setup like .(Which Openstack Version and 
other related details )

with best regards
gaurav


From: onap-discuss-boun...@lists.onap.org  
on behalf of bharath thiruveedula 
Sent: 22 August 2017 01:13
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [DCAE] DCAE 1.1 issues

Hi,

I am trying to setup closed loop using vFW demo with openstack as VIM. I am 
setting up DCAE 1.1 version and maintaining other components in release-1.0.0 
version. But while setting DCAE 1.1 I am facing the following error.

"Caught: org.openecomp.ncomp.sirius.manager.Jetty8ClientException: HTTP Request 
False:  URL: 
http://localhost:9998/resources/services/vm-docker-host-1
 code:400 msg.REQUEST-FAILED-UNDEPLOY-4001W REQUEST-FAILED-DELETESERVER-40001W 
| Absolute URI:null/services"

Seems like the error raised from the line 
https://gerrit.onap.org/r/gitweb?p=dcae/demo.git;a=blob;f=dcae-demo-controller/src/main/docker-build/controller-startup.sh;h=9e284bb65df4aa81ec860f00631d19a2ba4e3ec0;hb=refs/heads/master#l35.
 I couldn't understand what is happening in the groovy script.
Finally DCAE-C-Container logs as below:
waiting: object does not exists 
/openstack/locations/ZONE/projects/OPEN-ECOMP/keypairs/onap1_key_cW8s_dcae: 
waited 48 milliseconds

Anyone faced the above issue, any help would be much appreciated.

Best Regards
Bharath T
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Stabilized the ONAP master branch

[Gaurav Gupta (c)]

Hi  Ran Pollak


amazing intiative . May I request you to include DACE Init issues also in your 
list of items to be resolved . Do let me know if you need any specifics of the 
issues .

with best regards
Gaurav


From: onap-discuss-boun...@lists.onap.org  
on behalf of Ran Pollak 
Sent: 21 August 2017 21:34
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] Stabilized the ONAP master branch


Hello ONAP Community Members,



This is the first Daily status for the ONAP community regarding the status of 
the Master branch, this format will change into all the ONAP components with 
their issues/Status and we will add also info regarding  “health-check” 
scenarios.

Part of our efforts to stabilize the 1.1 ONAP and certify Open loop, we are 
troubleshooting the issues and below is the issue we are now stuck at. We need 
more help on this since this is reported as high and still in Open state.



Bug


Module


Issue


State


Defect Aging


Resolution


-


AAI


Unable to deploy model loader docker in AAI


Closed


NA


Update the port numbers and restart the dockers


-


SO


Unable to connect to AAI due to SSL


Closed


NA


1. Comment the certificate part in java.security file resides in 
/etc/java-8-openjdk/security
2. Update mso.asdc.json located in /etc/mso/config.d path.


AAI-190


AAI


AAI was not able to communicate with ASDC


Closed


NA


Stop and remove the old dockers, place new dockers and update the java.security 
file like above.


VID-38


VID


Deploy button is not working in VID to distribute Model


Open


10 days


We have this issue reported and been followed up for more than ten days yet no 
update. Posted on community as well.




Please, if you have something to add or ask please contact me.



BR,

Ran Pollak

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/email-disclaimer
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] vCPE: Consider multi-cloud support in R2

[Gaurav Gupta (c)]

Yoav , Kang Xi


if the below two are not goal


a.1- If performance  or latency on VxLAN is not being monitored and not the 
goal for individual  vCPE

a.2 - Also if multiple Instances of vCPE existing at the same time  is not to 
be supported


Then whether vCPE is  deployed across  multiple DC or single DC it makes no 
difference .Hence I would agree  to what is described below .


with best regards

gaurav



From: onap-discuss-boun...@lists.onap.org  
on behalf of Yoav Kluger 
Sent: 10 August 2017 03:52:41
To: Kang Xi; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] vCPE: Consider multi-cloud support in R2


Kang, all,



Sorry could not attend the meeting (which collided with the ARC meeting).



I would propose to not view the connectivity between clouds as a problem, or 
use case, ONAP needs to solve. Service provides who have deployed multiple 
clouds have typically also established connectivity between them, in most cases 
via some type of a L2 VPN. When ONAP instantiates VNFs there is an assumption 
that it can then communicate with them, e.g. for configuration or closed loop 
operations, over an OAM overlay network. We do not bother showing how this OAM 
network is routed, and in particular how SDNC, as an example, can communicate 
with a VNF which happens to be instantiated in a remote DC. We assume whatever 
underlay is need is in place which allows communicating with all VNFs over the 
one OAM network.



Similarly, if two VNFs are assumed to communicate over regular IP networking 
(not to be confused with service chaining), then, without loss of generality, 
we can showcase them in one DC, assuming that if in real life they were to be 
instantiated in two DCs, then the inter-dc connectivity already in place would 
enable them to communicate just as well.



The other alternative would be that we would have to showcase each VNF in a 
separate DC – to “make sure” the use case works under any deployment scenario. 
This obviously does not make sense, and fortunately is also not needed for the 
reasons sated above.



I would therefore submit that the vCPE use case, which instantiates all its 
VNFs in a single DC, is sufficient to showcase ONAP’s capability to instantiate 
and manage a vCPE use case under any deployment.



Thanks,

Yoav Kluger

Amdocs Technology

+1(201)912-7294

+972-54-4850278

[amdocs-a]



From: Kang Xi [mailto:kang...@huawei.com]
Sent: Tuesday, August 08, 2017 11:37 AM
To: onap-discuss@lists.onap.org
Cc: Yunxia Chen ; Pawłowski Michał 1 - Korpo 
; Yoav Kluger ; FREEMAN, 
BRIAN D 
Subject: vCPE: Consider multi-cloud support in R2



Hi All,



During the meeting “[integration] vCPE for R1: Support multiple clouds or not?” 
(Aug. 8 11:00-11:25am EST), the attendees unanimously concluded to leave the 
support for multiple clouds to the next release. For R1, the release 
implementation will only target a single cloud set up.



The rationale behind the above conclusion is that multi-cloud support, while 
technically feasible, would need quite some discussions to decide on multiple 
issues including lab set up, network set up, work flow design, etc. Adding it 
to R1 would further tighten the R1 schedule.



The list of attendees is shown below:



[cid:image003.jpg@01D3113A.7DB69750]

Regards,

Kang



This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/email-disclaimer
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] NetConf Mount from Appc towards SDNC

[Gaurav Gupta (c)]

Hello Brian


I have been looking for the need of why there is a need for creating NetConf 
Mount in APPC from SDNC in demo workflow . Is there any reason for the same ?.


https://wiki.onap.org/display/DW/Automatically+Creating+a+Netconf+Mount+in+APPC+from+SDNC


For example for vFW  following are my question

 1 -When is this netConf Mount is needed , because as far as I know everything 
about VNF gets created by MSO using  Openstack Heat API .

2. Is is part of VNF creation process   or part of traffic generation .


or there is something subtle I am missing . Pls help to clarify


with best regards

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Difference between sdc parent repo and others

[Gaurav Gupta (c)]

Hello Michael


An Old world thought - Actually if the project name and code structure could be 
kept intuitive and consistent with each other  that will be great .


Second  request is to have everything   packaged as in docker container .

Thanks

Gaurav


From: onap-discuss-boun...@lists.onap.org  
on behalf of Michael O'Brien 
Sent: 20 July 2017 19:51
To: Chen, Wei D; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Difference between sdc parent repo and others


Dave,

   Good question.  It would be good to have some metadata on 1.0-only, 1.0/R1, 
R1-only state of each repo.  I posed a similar question in the past specific to 
how we are handling 1.0.0 era repos and the new R1 repos.  I also am under the 
impression there will be no 1.1.0 release of 1.1.0-SNAPSHOT (current master) – 
just an R1.



   Cases are

1.0   repos deprecated (like dcae?)

1.0   repos repurposed for R1 (like sdc)

R1 new repos (like dcaegen2 and sdc-tosca)



  I usually use the new projects page to get the R1 list (on each dated subpage 
like 5/11/17) and any listed repo not on each project page is likely a 1.0 only 
repo.  However some of the pages are not updated in sync with gerrit (for 
example SDC has a lot of new repos not yet listed in the wiki) – in that case 
you will need an old copy of the root pom.xml to filter out 1.0 repos.  However 
if repos like SDC that live in both the old 1.0 and R1 environments are not 
backwards compatible perhaps we just need a list of deprecated 1.0 repos to 
exclude from cloning.

https://wiki.onap.org/display/DW/Approved+Projects





I propose we make a new or conditional root pom.xml so we can build either 
1.0 or R1 and not get compile failures across the releases.

Or publish a list of deprecated repos and assume everything else is R1 
current.

Before R1 the list of repos for 1.0/1.1.0-SNAPSHOT (up to May) for a clean 
build was

https://jira.onap.org/browse/COMMON-17

https://github.com/obrienlabs/onap-root



aai/aai-common

aai/aai-service

aai/logging-service

aai/model-loader

aai/rest-client

aai/router-core

aai/search-data-service

appc/deployment

dcae/apod/analytics

dcae/collectors/ves

dcae/controller/analytics

dcae/controller/dcae-controller-core

dcae/controller/dcae-controller-service/dcae-controller-service-dmaap-drsub

dcae/controller/dcae-controller-service-cdap

dcae/controller/dcae-controller-service-docker

dcae/controller/dcae-controller-service-vm

dcae/dcae-inventory

dcae/demo

dcae/dmaapbc

dcae/operation/utils

demo

ecompsdkos/ecomp-sdk

mso

ncomp/cdap

ncomp/core

ncomp/docker

ncomp/maven

ncomp/openstack

ncomp/utils

policy/common

policy/docker

policy/drools-applications

policy/drools-pdp

policy/engine

portal

sdc

sdnc/adaptors

sdnc/core

sdnc/northbound

sdnc/oam

sdnc/plugins

ui/dmaapbc

vid



Thank you

/michael



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Chen, Wei D
Sent: Thursday, July 20, 2017 05:08
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] Difference between sdc parent repo and others



Hi all,



I notice there is a sdc parent repo which hold large amount of code for many 
components such as catalog-fe, catalog-be, common etc., meanwhile there are 
separated sdc repos 
sdc_common,
  
sdc-tosca
 and so on from the gerrit.



My question is why we organized the sdc repository in this way, I saw 

[onap-discuss] Queries w.r.t to common cloud Interface

[Gaurav Gupta (c)]

Hello There

While going through the below link for vFW Demo
https://wiki.onap.org/display/DW/Tutorial%3A+Verifying+and+Observing+a+deployed+Service+Instance#Tutorial:VerifyingandObservingadeployedServiceInstance-vFirewallFlow
Tutorial: Verifying and Observing a deployed Service 
...
wiki.onap.org
Yes, operations 25/26 where we preload the VF Module are currently done by the 
robot framework outside of VID (although prior to the SDNC call - robot runs a 
rest ...



We had below understanding , the long term  goal of ONAP is to allow to create  
VF from MSO using  Adapters  towards   SDNC and APPC .
For Infrastructure related to Compute Resource - MSO uses  PO  .
For Network infrastructure  such as ( ethernet port , VLAN , Subnet , Network)  
MSO will use sdnc-adapter towards SDNC .
For Application of the VNF  For example Firewall function in vFW . MSO will 
interact with APPC to create the firewall application.
once VNF creation is done  - How the DCAE comes into play ? what will be the 
trigger for  DCAE to start  Event/Alarm Monitoring and Analytics and remedial 
action .
At present  MSO interacts with  Openstack directly for Compute , Network and 
Volume VF Creation using Heat API  .
Following are our questions -
a1- What is the superset of VF definition For Network. is this consists of only 
 ethernet Port , VLAN ,Subnet,  Network or there are addition to above list  ? .
 a2- what is the VF Definition for APPC For use cases -vFW , vCPE ,  vIMS , 
VoLTE
answers to these questions will help  provide the API definition needed from 
the various Cloud Platform Provider .

with best regards

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [SDNC][APP-C] Importance of SDNC in vFW Demo

[Gaurav Gupta (c)]

Prashant / Manoj


As per our understanding of SDNC Code Today there is no southbound interface 
existing .


with best regards

gaurav



From: onap-discuss-boun...@lists.onap.org  
on behalf of Prashant Kumar 
Sent: 11 July 2017 13:05
To: Cipher Cipher; Manoj K Nair
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [SDNC][APP-C] Importance of SDNC in vFW Demo


Hi Manoj,



Yes NB API’s defined are for Network instance creation which includes resources 
in AA

Yes if you will go through DG’s you will find that depending upon actions 
provided like assign/reserve/allocate/activate, DG flow behaves differently.

From DG we can communicate to AA or any other southbound system using 
adaptors.



Above comments are for sdnc.



Thanks,

Prashant



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Cipher Cipher
Sent: Tuesday, July 11, 2017 12:53 PM
To: Manoj K Nair 
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [SDNC][APP-C] Importance of SDNC in vFW Demo



Hi,



Thanks Manoj and Tapan for your replies.



Manoj I am new to dgbuilder. Can you just briefly explain about dgbuilder and 
its role in appc and sdnc



Cheers

Shankar



On 11-Jul-2017 12:42 PM, "Manoj K Nair" 
> wrote:

Hi Tapan,



In 
northbound/vnfapi/provider/src/main/java/org/openecomp/sdnc/vnfapi/vnfapiProvider.java,
 I could see many preload API functions implemented. For example , 
preloadNetworkTopologyOperation . Looking at the DG in 
vnfapi/src/main/xml/VNF-API_preload-network-topology-operation.xml , I think  
this is meant to reserve resources from network . So this may lead to a call to 
AAI for resource reservation. Can you confirm this is the flow you meant below 
as answer to #1 which can be alternately used instead of what is done currently 
by MSO workflow (for resource allocation/reservation in A)



I think #3 below is for Service Function Chain.  While ODL supports SFC through 
the SFC project, not sure if this is completely leveraged in ONAP. Also in ODL 
SFC most of the use cases involves working with VIM (say openstack) to map the 
networking-sfc port pairs in to ODL.  In the DG supported node types, maybe we 
need to leverage multiple “configure“ DG node to set configuration in multiple 
hops (vnf-instance operation or network-topology-operation), or use native SFC 
project in ODL. May be some experts in DG can clarify this.



Regards



Manoj



[https://www.netcracker.com/assets/img/netcracker-social-final.png]ƕ

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org]
 On Behalf Of Tapan Majhi
Sent: Tuesday, July 11, 2017 10:53 AM
To: Cipher Cipher; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [SDNC][APP-C] Importance of SDNC in vFW Demo



Cipher,



I believe SDNC is not getting used to its full capacity in the demo. The 
workflow getting used in MSO is having one of the step as preloading the data.

Because of which SDNC is getting used to get all the ips for the heat file.In 
the demo . In complex scenarios SDNC can play a vital role to create resources 
,updating AAI and many more.

In the demo not such action taking place. MSO is doing everything.

Someone from SDNC can explain it better.



I didn’t use the ./demo.sh appc directly but this is needed at the time of 
closed loop . When APPC controls the traffic with the help of vnf action 
“ModifyConfig”.

If the mounting is not done ModifyConfig will not be successful. If you have 
different VNF then in that also we need honeycomb to make modifyConfig 
successful.



Not sure about your third query. What is SFC ?



Regards,

Tapan M







From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Cipher Cipher
Sent: Tuesday, July 11, 2017 12:08 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SDNC][APP-C] Importance of SDNC in vFW Demo



Hey,



I am trying vFirewall demo using ONAP. Along the way I am trying to understand 
the each component I encountered. I couldn't understand the following two 
points.



1) Preloading of data: Before deploying Vf-module, we have to preload the data 
to SDNC. But in one of the comments, I came to know this step to update AAI 
indirectly through SDNC. If that's true, then what is the role of SDNC here. 
How can I make use of SDNC in complex usecases.



2) APP-C Mounting: Why we need to ./demo.sh appc to trigger the action in 
packet generator. If I am using a different VNF, how can I use ./demo.sh ?



3)In the release-1.0.0 can we have support of SFC in SDNC?

Re: [onap-discuss] Info needed about application inside dockers on MSO and SDNC inside ONAP system

[Gaurav Gupta (c)]

Thanks Michael for the Info .


I had looked at the link for docker-containers .But what you shared below w.r.t 
to

--"Not everything is containerised " . and Microservices input makes certain 
things very clear  .


Do you any time plan to propose on a unified packaging strategy for each VM and 
everything as in docker container .


Second Item could be to improve upon --

a- What is the most common item in each ONAP VM .

b - What is the common item in few of the ONAP VM where in few could be 2 and 
higher but not all ONAP VM's.




with best regards

gaurav



From: Michael O'Brien <frank.obr...@amdocs.com>
Sent: 04 July 2017 19:44:54
To: Gaurav Gupta (c); Lefevre, Catherine; onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] Info needed about application inside dockers on MSO 
and SDNC inside ONAP system

Gaurav,
   Hi, good question, we had the same questions about the OOTB docker 
architecture – it looks like there is a mix of docker-compose (VID, SDC, MSO 
and APPC for example) and raw docker run orchestration.  A evolving low level 
view of the 1.0 system (1 instead of 2 AAI VMs) is in a diagram below.

https://wiki.onap.org/display/DW/Overall+Deployment+Architecture#OverallDeploymentArchitecture-Version1.0.0<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Overall-2BDeployment-2BArchitecture-23OverallDeploymentArchitecture-2DVersion1.0.0=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=RO_vjZHrwgAWBOm1TgFt_Vy1ZXZZS4qnOmOVSw6zt1I=EPuwfPlS1-3T4ZcyJBMlF5GOT89yXZfjtAbIogZJa6A=>

   Essentially any microservice (docker container) that does not need to expose 
a port – should be able to communicate on its vm via it’s docker private 
network – usually this is setup in compose.  For others that expose the DB 
directly like MSO, SDNC or APPC the mariaDB 3306 is mapped as well to 32768 
outside.
   Also note that not everything is containerized yet – some jars run directly 
on their VM – this is specific to 4 of the 5 zld* VMs of DCAE.

   /michael

From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Monday, July 3, 2017 09:58
To: Lefevre, Catherine <cl6...@intl.att.com>; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Info needed about application inside dockers on MSO 
and SDNC inside ONAP system


Good Morning Catherine



Actually I had looked at the below Link already .



but was looking more to know the actual applications to Docker mapping for 
understanding various docker interaction inside each VM such as MSO and SDNC .



thanks and regards

gaurav


From: Lefevre, Catherine <cl6...@intl.att.com<mailto:cl6...@intl.att.com>>
Sent: 25 June 2017 01:51
To: Gaurav Gupta (c); 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: RE: [onap-discuss] Info needed about application inside dockers on MSO 
and SDNC inside ONAP system


Good evening Gaurav,



You can find the ONAP Docker strategy on the ONAP wiki – look at the “VMs and 
Containers” section

https://wiki.onap.org/display/DW/Release+Notes+1.0.0+draft<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Release-2BNotes-2B1.0.0-2Bdraft=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=___RyqnGUy8ocd5iLdY13utJ27ycIKqc_vKkHZmNyac=Uwb5yeeKXKY_tGIb_vVLOx3kTj-5jnSe2YynG4OaB8o=>



Best regards

Catherine



From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Friday, June 23, 2017 8:00 PM
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: [onap-discuss] Info needed about application inside dockers on MSO and 
SDNC inside ONAP system



Hello There



We  have started looking at MSO Code and there does exists an relationship 
between docker-compose.yml and pom.xml present inside multiple directories 
inside MSO projects   .



To Further look at Code Flow  - In case some has deployed ONAP System can the 
following information be provided .



a- how many Application are running inside each docker containers  . ( When I 
say Application I mean distinct PID as indicated  in ps -eaf )

b - How does the Application running inside 2 differnt docker containers inside 
the same VM  interacts with each other .



For Example MSO has 2 docker containers and SDNC 4 Dockers .

- ps -eaf  ( output from each docker containers )

- netstat -tunlp ( output from each docker containers )



pls note that above two information needs to be collected from each of the 
dockers inside MSO , SDNC





with best regards

Gaurav

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/e

Re: [onap-discuss] Info needed about application inside dockers on MSO and SDNC inside ONAP system

[Gaurav Gupta (c)]

Good Morning Catherine


Actually I had looked at the below Link already .


but was looking more to know the actual applications to Docker mapping for 
understanding various docker interaction inside each VM such as MSO and SDNC .


thanks and regards

gaurav



From: Lefevre, Catherine <cl6...@intl.att.com>
Sent: 25 June 2017 01:51
To: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] Info needed about application inside dockers on MSO 
and SDNC inside ONAP system


Good evening Gaurav,



You can find the ONAP Docker strategy on the ONAP wiki – look at the “VMs and 
Containers” section

https://wiki.onap.org/display/DW/Release+Notes+1.0.0+draft<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Release-2BNotes-2B1.0.0-2Bdraft=DwMFAg=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=___RyqnGUy8ocd5iLdY13utJ27ycIKqc_vKkHZmNyac=Uwb5yeeKXKY_tGIb_vVLOx3kTj-5jnSe2YynG4OaB8o=>



Best regards

Catherine



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Friday, June 23, 2017 8:00 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] Info needed about application inside dockers on MSO and 
SDNC inside ONAP system



Hello There



We  have started looking at MSO Code and there does exists an relationship 
between docker-compose.yml and pom.xml present inside multiple directories 
inside MSO projects   .



To Further look at Code Flow  - In case some has deployed ONAP System can the 
following information be provided .



a- how many Application are running inside each docker containers  . ( When I 
say Application I mean distinct PID as indicated  in ps -eaf )

b - How does the Application running inside 2 differnt docker containers inside 
the same VM  interacts with each other .



For Example MSO has 2 docker containers and SDNC 4 Dockers .

- ps -eaf  ( output from each docker containers )

- netstat -tunlp ( output from each docker containers )



pls note that above two information needs to be collected from each of the 
dockers inside MSO , SDNC





with best regards

Gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] MSO code flow to OpenStack for Orchestration

[Gaurav Gupta (c)]

Hi Rob , Daniel


To futher investigate and difference between createNetwork and 
createNetworkContrail .


We have come to an understanding that based on orchestration Mode whether to 
use createNetwork/createNetworkContrail is used .


Incase of the Orchestration Mode  Heat  CreateNetworkContrail is used

in case of Orchestration Mode neutron createNetwork is used .


is this understanding correct  ?.


with best regards

gaurav


From: onap-discuss-boun...@lists.onap.org <onap-discuss-boun...@lists.onap.org> 
on behalf of Arun Arora (c) <aroraa...@vmware.com>
Sent: 27 June 2017 19:37:58
To: DAUGHERTY, ROBERT E; ROSE, DANIEL V; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] MSO code flow to OpenStack for Orchestration


Hi Rob,



Yes, I also understand that the OpenStack APIs are called from Network/VNF 
adapter.

However, we are still working on the code flow understanding from Network/VNF 
adapter to above. As you mentioned BPMN calls Network/VNF adapter to do the 
operations, we now will work on BPMN and above to complete our understanding.



Best Regards,

Arun



From: DAUGHERTY, ROBERT E [mailto:rd4...@att.com]
Sent: Tuesday, June 27, 2017 7:30 PM
To: Arun Arora (c) <aroraa...@vmware.com>; ROSE, DANIEL V <dr6...@att.com>; 
onap-discuss@lists.onap.org
Cc: Gaurav Gupta (c) <guptagau...@vmware.com>; Kapil Gupta (c) 
<gka...@vmware.com>; Jyothis S (c) <jyoth...@vmware.com>
Subject: RE: MSO code flow to OpenStack for Orchestration



Arun,



Just confirming what said: OpenStack APIs are called directly from the MSO 
Network/VNF adapter.  The BPMN flow makes calls to the adapter to perform those 
operations.



Rob



From: Arun Arora (c) [mailto:aroraa...@vmware.com]
Sent: Tuesday, June 27, 2017 9:43 AM
To: ROSE, DANIEL V <dr6...@att.com<mailto:dr6...@att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; DAUGHERTY, 
ROBERT E <rd4...@att.com<mailto:rd4...@att.com>>
Cc: Gaurav Gupta (c) <guptagau...@vmware.com<mailto:guptagau...@vmware.com>>; 
Kapil Gupta (c) <gka...@vmware.com<mailto:gka...@vmware.com>>; Jyothis S (c) 
<jyoth...@vmware.com<mailto:jyoth...@vmware.com>>
Subject: RE: MSO code flow to OpenStack for Orchestration



Awesome!!



Thanks Danial :)





Best Regards,

Arun





From: ROSE, DANIEL V [mailto:dr6...@att.com]
Sent: Tuesday, June 27, 2017 7:03 PM
To: Arun Arora (c) <aroraa...@vmware.com<mailto:aroraa...@vmware.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; DAUGHERTY, 
ROBERT E <rd4...@att.com<mailto:rd4...@att.com>>
Cc: Gaurav Gupta (c) <guptagau...@vmware.com<mailto:guptagau...@vmware.com>>; 
Kapil Gupta (c) <gka...@vmware.com<mailto:gka...@vmware.com>>; Jyothis S (c) 
<jyoth...@vmware.com<mailto:jyoth...@vmware.com>>
Subject: RE: MSO code flow to OpenStack for Orchestration



I believe that flow of calls is correct with the exception of I don’t think 
they call the contrail method all the time. The bpmn flow either creates a 
vanilla neutron network or a contrail neutron newwork, I think you have both in 
one flow. Adding in a MultiVIM layer is one of the R1 goals, and right now 
there is only direct calls to openstack.



That said someone like Rob Daugherty can give you a better understanding of the 
code if you have more specific qustions



Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: Arun Arora (c) [mailto:aroraa...@vmware.com]
Sent: Tuesday, June 27, 2017 9:29 AM
To: ROSE, DANIEL V <dr6...@att.com<mailto:dr6...@att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Cc: Gaurav Gupta (c) <guptagau...@vmware.com<mailto:guptagau...@vmware.com>>; 
Kapil Gupta (c) <gka...@vmware.com<mailto:gka...@vmware.com>>; Jyothis S (c) 
<jyoth...@vmware.com<mailto:jyoth...@vmware.com>>
Subject: RE: MSO code flow to OpenStack for Orchestration



Hi Daniel,



Thanks for the quick response :)

We will check and get back if we have any further queries.



Apart from this, is the code flow from Network/ VNF adapter to OpenStack is 
correct as mentioned below?

Also, we concluded that there is no Intermediate layer between MSO and 
OpenStack API calls i.e. OpenStack APIs are called directly from Network/ VNF 
adapter. Can you confirm my this understanding as well?



Best Regards,

Arun Arora





From: ROSE, DANIEL V [mailto:dr6...@att.com]
Sent: Tuesday, June 27, 2017 6:54 PM
To: Arun Arora (c) <aroraa...@vmware.com<mailto:aroraa...@vmware.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Cc: Kapil Gupta (c) <gka...@vmware.com<mailto:gka...@vmware.com>>; Jyothis S 
(c) <jyoth...@vmware.com<mailto:jyoth...@vmware.com>>
Subject: RE: MSO code flow to OpenStack for Orchestrati

[onap-discuss] Info needed about application inside dockers on MSO and SDNC inside ONAP system

[Gaurav Gupta (c)]

Hello There

We  have started looking at MSO Code and there does exists an relationship 
between docker-compose.yml and pom.xml present inside multiple directories 
inside MSO projects   .

To Further look at Code Flow  - In case some has deployed ONAP System can the 
following information be provided .

a- how many Application are running inside each docker containers  . ( When I 
say Application I mean distinct PID as indicated  in ps -eaf )
b - How does the Application running inside 2 differnt docker containers inside 
the same VM  interacts with each other .

For Example MSO has 2 docker containers and SDNC 4 Dockers .
- ps -eaf  ( output from each docker containers )
- netstat -tunlp ( output from each docker containers )

pls note that above two information needs to be collected from each of the 
dockers inside MSO , SDNC



with best regards

Gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Code base to Docker Image mapping for MSO and SDNC VM's

[Gaurav Gupta (c)]

Hi Catherine , Gary , all


 slightly extending the docker image to also know which files/set of 
directories are used in creating which docker image .


the number of  Images given in these files and present in ONAP wiki matches for 
SDNC VM and MSO VM .

/mso/docker-config
$ grep -i image docker-compose.yml
image: mariadb:10.1.11
image: openecomp/mso
/sdnc/oam/installation/src/main/yaml (master)
$ grep -i image docker-compose.yml
image: mysql/mysql-server:5.6
image: openecomp/sdnc-image:latest
image: openecomp/admportal-sdnc-image:latest
image: openecomp/dgbuilder-sdnc-image:latest

Question   -

a- where/which  is the file /script that contains information about what set of 
files/directories   be compiled for creating the given docker image .
b- I tried build Log information too . But unable to create that Link .


with best regards
gaurav

P.S-  I have also chanced upon  pom.xml present but was not able to create a 
relationship between  docker-compose.yml  and pom.xml





From: onap-discuss-boun...@lists.onap.org  
on behalf of Lefevre, Catherine 
Sent: 18 June 2017 14:54
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images


Dear all,



I have created the following Jira stories to cover this request:

AAI-10, APP-13, CIMAN-3, COMMON-21, DCAE-31, MSO-19, POLICY-25, PORTAL-19, 
SDC-33, SDNC-17, TEST-27, VID-16.



Best regards

Catherine



From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
Sent: Sunday, June 18, 2017 10:55 AM
To: Lefevre, Catherine 
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images



+1



BR,

Viswa



On Sat, Jun 17, 2017 at 3:44 AM, Lefevre, Catherine 
> wrote:

Dear all,



I want to highlight that the changes from “openecomp” to “onap” is not only 
about the docker containers and gerrit repo.

It will also require to change the source code, artefacts, to re-adjust Jenkins 
jobs etc. across all the components.



We could create an epic so each team could assess this effort based on their 
resource capacity for R1.



Best regards

Catherine



From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org]
 On Behalf Of Gildas Lanilis
Sent: Friday, June 16, 2017 11:41 PM
To: ROSE, DANIEL V >; Gary Wu 
>; Viswa KSP 
>

Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images



Hi,



I just discussed this with Andy at LF.

As we speak Nexus is supporting both org.openecomp and org.onap. So there is no 
urgency to make the shift.

As we have so many other things to do, we may wait until M2 to make it happen.



Thanks,

Gildas

ONAP Release Manager

1 415 238 6287



From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of ROSE, DANIEL V
Sent: Friday, June 16, 2017 1:53 PM
To: Gary Wu; Viswa KSP
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images



It is on everyone’s radar and was discussed at the may F2F but I don’t think 
there was a timeline yet because it will be disruptive for a bit. Timeline will 
probably have to come from the TSC due to all the cross project impacts. Maybe 
bring it up in the tsc list if you think its important Viswa.



Thanks,

Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gary Wu
Sent: Friday, June 16, 2017 11:20 AM
To: Viswa KSP >
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images



My understanding is that all the docker image names will be changed to onap.  
In addition, all the Java artifacts will have groupIds and package names 
changed to org.onap as well.  I’m not sure what the timeline is on either of 
these items.



Thanks,

Gary



From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
Sent: Friday, June 16, 2017 2:31 AM
To: Gary Wu >
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] List of ONAP Docker Images



Is there a proposal to standardize docker parent repo to just onap ? ( Cos I 
can see bunch of docker parents such as onap, openecomp, dcae, aai etc ).



BR,

Viswa



On Fri, Jun 16, 2017 at 4:14 AM, Gary Wu 

Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer

[Gaurav Gupta (c)]

Subhash


These IP Address you will mention in the onap configuration files .



To check which application is holding these ip address .

you can login to each docker container and check netstat -tunlp  | grep 
ipaddress -- you should see some application running on those ip address and on 
specific port .


thanks

Gaurav



From: ROSE, DANIEL V <dr6...@att.com>
Sent: 16 June 2017 21:14
To: Subhash Kumar Singh; Gaurav Gupta (c); onap-discuss@lists.onap.org
Cc: Kanagaraj Manickam
Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer


I believe MSO supports keystone 3, so you can use onap except for dcae, but 
Robot does not currently support keystone v3 so the demo scripts will not work.



Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: Subhash Kumar Singh [mailto:subhash.kumar.si...@huawei.com]
Sent: Friday, June 16, 2017 8:17 AM
To: ROSE, DANIEL V <dr6...@att.com>; Gaurav Gupta (c) <guptagau...@vmware.com>; 
onap-discuss@lists.onap.org
Cc: Kanagaraj Manickam <kanagaraj.manic...@huawei.com>
Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer



Hello Daniel and Gaurav,



Daniel,

Yes, we are using the using keystone 3 (OS_IDENTITY_API_VERSION=3). Could you 
please let us know, if it is possible to proceed further with keystone v3.



Gaurav,

Could you please let us know how the DCAE uses these allocated 5 IPs.



--

Regards,

Subhash Kumar Singh





From: ROSE, DANIEL V [dr6...@att.com]
Sent: Thursday, June 15, 2017 22:48
To: Gaurav Gupta (c); Subhash Kumar Singh; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: RE: [onap-discuss] Robot VM Demo.sh is failing to initialize customer

Also that error means that you are using keystone 3 I believe.



Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Thursday, June 15, 2017 10:50 AM
To: Subhash Kumar Singh 
<subhash.kumar.si...@huawei.com<mailto:subhash.kumar.si...@huawei.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] Robot VM Demo.sh is failing to initialize customer



Subhash



Can you try fixing the ete.sh health first .





The health check  For DCAE fails because the data collection and analytics 
platform that DCAE controller spins up off the Heat template is not there. 
Please pull the latest templates from Gerrit (onap_openstack_float.* is the 
right one).



In order for DCAE to work correctly, at this time, you need to manually assign 
5 floating IPs to your OpenStack project. This 5 IPs need to be associated to:

  dcae_coll_float_ip

  dcae_db_float_ip

  dcae_hdp1_float_ip

  dcae_hdp2_float_ip

  dcae_hdp3_float_ip



in whatever order you want. At run time, the DCAE controller will fetch those 
IPs from the underlying OpenStack platform and assign to the VMs defined above. 
To assign floating IPs to your project, from the OpenStack horizon dashboard, 
click on Compute -> Access & Security -> Floating IPs. Then click “Allocate IP 
To Project” 5 times. OpenStack will assign 5 IPs to you.



I will update the wiki page soon 
https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_ONAP-2BInstallation-2Bin-2BVanilla-2BOpenStack=DwMGaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs=8ZSFZ8NzhjRZqQVQ6hUFSbtAv3zrNu4s6ys6p-TuyKQ=>and
 send an email when done. Note, however, that DCAE team is still working on a 
DNS issue within the DCAE collector docker container. The issue is tracked in 
this Jira: 
https://jira.onap.org/browse/DCAE-7<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAE-2D7=DwMGaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs=OX51a2fmXvVRJHuK36u2NwrA3eCXCkJBgzQdqgBk9_E=>





Thanks

Gaurav



From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
<onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Subhash Kumar Singh 
<subhash.kumar.si...@huawei.com<mailto:subhash.kumar.si...@huawei.com>>
Sent: 15 June 2017 19:50
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: [onap-discuss] Robot VM Demo.sh is failing to initialize customer



Hello Everyone,



We are attempting execute 'init_customer' to pre-populate A but we the robot 
test cases (demo.sh) are failing. At the same time, we can see the healthcheck 
(ete.sh) is passing after adding some changes to bri

Re: [onap-discuss] info about Dockers functionality in SDNC , VID and Infrastucture Controller

[Gaurav Gupta (c)]

Thanks Viswa & Daniel Rose


Just a dumb question what is this demo mentioned below ? .


 SDNC talks to aai in the demo. SDNC is called by MSO

-  Appc interacts with aai in the demo, and it is called by MSO, Policy

with best regards
gaurav


From: Viswa KSP <kspviswa.git...@gmail.com>
Sent: 15 June 2017 20:31
To: Gaurav Gupta (c)
Cc: ROSE, DANIEL V; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] info about Dockers functionality in SDNC , VID and 
Infrastucture Controller

Gaurav,

You can access code under projects @ 
gerrit.onap.org<https://urldefense.proofpoint.com/v2/url?u=http-3A__gerrit.onap.org=DwMFaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=WwLrgLIBbEEefCt_G3XZmLMFYhTMkg6sokxXgWvz9J4=dEr5DayD28zv52RgschdU9pSdu6vQ_Awi2qDvvVuABk=>.
 Yup, LF ID would give you access to all tools pertaining to ONAP project.

BR,
Viswa

On Thu, Jun 15, 2017 at 8:22 PM, Gaurav Gupta (c) 
<guptagau...@vmware.com<mailto:guptagau...@vmware.com>> wrote:

Thanks Rose .


Can you please let me know the details about where does the code base exists  
for docker /container from MSO , SDNC and APPC  , DCAE.


and what do I need to do to access that code base . I belive Linux Foundation 
Id should be sufficient .



 with best regards

gaurav



From: ROSE, DANIEL V <dr6...@att.com<mailto:dr6...@att.com>>
Sent: 15 June 2017 20:09
To: Gaurav Gupta (c); 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: RE: [onap-discuss] info about Dockers functionality in SDNC , VID and 
Infrastucture Controller


-  VID calls MSO, MSO does not call vid, that’s why its not mentioned

-  We don’t have an infrastructure controller today, that is being made 
as part of R1 in multivim project. Today the po adapter in MSO code handles 
openstack calls for MSO and appc has their own library for calling openstack

-  SDNC talks to aai in the demo. SDNC is called by MSO

-  Appc interacts with aai in the demo, and it is called by MSO, Policy

-  Depends on the odl plugins installed. It comes with a netconf one I 
think

-  Depends on the odl plugins installed. It comes with a netconf and 
chef one I think



Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
[mailto:onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>]
 On Behalf Of Gaurav Gupta (c)
Sent: Thursday, June 15, 2017 10:27 AM
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: [onap-discuss] info about Dockers functionality in SDNC , VID and 
Infrastucture Controller



Hello there



I am looking for some document , some call/message  flow /Architecture docs  
about functionality of docker containers inside  SDNC and VID and APPC  .

the focus area is as below



For Run Time Environment



 -  Does MSO Interacts with VID  directly ? .  - I belive yes But did not see 
this mentioned in MSO.HLD

 -  Which is the  Component in ONAP that interfaces /interacts with 
infrastructure controller ? .

-What are the other component SDNC Interacts within ONAP System ? .

-   What are the Other component that Appc interacts within ONAP System ?

 - what are the southbound interface defined for SDNC ? .

 - What is the southbound interface defined for APPC? .



I have tried looking through the below Link But did not find the information .



https://wiki.onap.org/display/DW/Design<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Design=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=8GYyi4CUYZxpCPv7u9ztXBjy-vhcTvHcd4S_eoyH9q0=>

https://wiki.onap.org/display/DW/Reference+Documents<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Reference-2BDocuments=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=emtIJT5xfd3RBtOz6B6WjdZ04gE4EZmBX5TisVqRmoU=>

https://wiki.onap.org/display/DW/Release+Notes+1.0.0+draft<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Release-2BNotes-2B1.0.0-2Bdraft=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=XOgaSyVKqR6CcgQpHUoV_Fl8tYhUVm3RluU69a3YL8I=>





with best regards

gaurav







___
onap-discuss mailing list
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
https://lists.onap.org/mailman/listinfo/onap-discuss<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.onap.org_mailman_listinfo_onap-2Ddiscuss=DwMFaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=WwLrgLIBbEEefCt_G3XZmLMFYhTMkg6sokxXgWvz9J4=KmnWANPjWvv9rueBSH59Dp8CXCcLgCQDo279up45u3U

Re: [onap-discuss] info about Dockers functionality in SDNC , VID and Infrastucture Controller

[Gaurav Gupta (c)]

Thanks Rose .


Can you please let me know the details about where does the code base exists  
for docker /container from MSO , SDNC and APPC  , DCAE.


and what do I need to do to access that code base . I belive Linux Foundation 
Id should be sufficient .



 with best regards

gaurav



From: ROSE, DANIEL V <dr6...@att.com>
Sent: 15 June 2017 20:09
To: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] info about Dockers functionality in SDNC , VID and 
Infrastucture Controller


-  VID calls MSO, MSO does not call vid, that’s why its not mentioned

-  We don’t have an infrastructure controller today, that is being made 
as part of R1 in multivim project. Today the po adapter in MSO code handles 
openstack calls for MSO and appc has their own library for calling openstack

-  SDNC talks to aai in the demo. SDNC is called by MSO

-  Appc interacts with aai in the demo, and it is called by MSO, Policy

-  Depends on the odl plugins installed. It comes with a netconf one I 
think

-  Depends on the odl plugins installed. It comes with a netconf and 
chef one I think



Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Gaurav Gupta (c)
Sent: Thursday, June 15, 2017 10:27 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] info about Dockers functionality in SDNC , VID and 
Infrastucture Controller



Hello there



I am looking for some document , some call/message  flow /Architecture docs  
about functionality of docker containers inside  SDNC and VID and APPC  .

the focus area is as below



For Run Time Environment



 -  Does MSO Interacts with VID  directly ? .  - I belive yes But did not see 
this mentioned in MSO.HLD

 -  Which is the  Component in ONAP that interfaces /interacts with 
infrastructure controller ? .

-What are the other component SDNC Interacts within ONAP System ? .

-   What are the Other component that Appc interacts within ONAP System ?

 - what are the southbound interface defined for SDNC ? .

 - What is the southbound interface defined for APPC? .



I have tried looking through the below Link But did not find the information .



https://wiki.onap.org/display/DW/Design<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Design=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=8GYyi4CUYZxpCPv7u9ztXBjy-vhcTvHcd4S_eoyH9q0=>

https://wiki.onap.org/display/DW/Reference+Documents<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Reference-2BDocuments=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=emtIJT5xfd3RBtOz6B6WjdZ04gE4EZmBX5TisVqRmoU=>

https://wiki.onap.org/display/DW/Release+Notes+1.0.0+draft<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Release-2BNotes-2B1.0.0-2Bdraft=DwMFAw=LFYZ-o9_HUMeMTSQicvjIg=2wwdGZ3YcpSivQ2Kio028A=A-DStWkQFkVWbo6qq5B5_qBjLbsssXSHatukLsByVS4=XOgaSyVKqR6CcgQpHUoV_Fl8tYhUVm3RluU69a3YL8I=>





with best regards

gaurav






___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] info about Dockers functionality in SDNC , VID and Infrastucture Controller

[Gaurav Gupta (c)]

Hello there


I am looking for some document , some call/message  flow /Architecture docs  
about functionality of docker containers inside  SDNC and VID and APPC  .

the focus area is as below


For Run Time Environment


 -  Does MSO Interacts with VID  directly ? .  - I belive yes But did not see 
this mentioned in MSO.HLD

 -  Which is the  Component in ONAP that interfaces /interacts with 
infrastructure controller ? .

-What are the other component SDNC Interacts within ONAP System ? .

-   What are the Other component that Appc interacts within ONAP System ?

 - what are the southbound interface defined for SDNC ? .

 - What is the southbound interface defined for APPC? .


I have tried looking through the below Link But did not find the information .


https://wiki.onap.org/display/DW/Design

https://wiki.onap.org/display/DW/Reference+Documents

https://wiki.onap.org/display/DW/Release+Notes+1.0.0+draft


with best regards
gaurav



___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [onap-discssus] Tooling for call flow

[Gaurav Gupta (c)]

Eric , others


Does it covers only the usecase Call Flow ? .

-  Can this be used both in Design Phase as well as Closed Loop Run Time 
Environment too .

 - Also can it this cover the Interaction  message/sequence for Various ONAP 
Components too when there is no Action Being done on ONAP Portal i.e no Service 
design and creation and No Closed Loop Run time environment .


with best regards

gaurav



From: onap-discuss-boun...@lists.onap.org  
on behalf of eric.deb...@orange.com 
Sent: 27 May 2017 01:01:15
To: ROSE, DANIEL V; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [onap-discssus] Tooling for call flow

Hello

I am talking about call flow for use-case description (eg call flow for VoLTE: 
https://wiki.onap.org/download/attachments/3246140/image2017-5-17_18-34-39.png?version=1=149501728=v2
) or for any documentation.

Eric

De : ROSE, DANIEL V [mailto:dr6...@att.com]
Envoyé : mercredi 24 mai 2017 19:58
À : DEBEAU Eric IMT/OLN; onap-discuss@lists.onap.org
Objet : RE: [onap-discssus] Tooling for call flow

Hi Eric,

Are you talking about call flows in the model 
(https://wiki.onap.org/display/DW/Service+Design#ServiceDesign-CNCF
 )?

Or are you talking about DGs in sdnc?

Thanks,
Daniel Rose
ECOMP / ONAP
com.att.ecomp
732-420-7308

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of 
eric.deb...@orange.com
Sent: Wednesday, May 24, 2017 3:17 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [onap-discssus] Tooling for call flow

Hello

To be able to work on call flow in a collaborative way, I believe that we 
should use a tool based on a description language rather using images.

Is there any guideline within the Linux Foundation for such tooling ?

Within Orange, we developed a cool tool:
https://github.com/Orange-OpenSource/EtherPlant

Eric

_



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.

_

Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.

This message and its attachments may contain confidential or privileged 
information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete 
this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.
Thank you.

___
onap-discuss 

Re: [onap-discuss] DCAE HealthCheck failing while running ete.sh from Robot VM on ONAP Environment using Vanila Openstack Mitaka

[Gaurav Gupta (c)]

Thanks Marco btw my name is Gaurav Not Gurav :-)

We shall try and get back to you


thanks

Gaurav


From: PLATANIA, MARCO (MARCO) <plata...@research.att.com>
Sent: 09 June 2017 18:25:37
To: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] DCAE HealthCheck failing while running ete.sh from 
Robot VM on ONAP Environment using Vanila Openstack Mitaka

Hello Gurav,

The health check fails because the data collection and analytics platform that 
DCAE controller spins up off the Heat template is not there. Please pull the 
latest templates from Gerrit (onap_openstack_float.* is the right one).

In order for DCAE to work correctly, at this time, you need to manually assign 
5 floating IPs to your OpenStack project. This 5 IPs need to be associated to:
  dcae_coll_float_ip
  dcae_db_float_ip
  dcae_hdp1_float_ip
  dcae_hdp2_float_ip
  dcae_hdp3_float_ip

in whatever order you want. At run time, the DCAE controller will fetch those 
IPs from the underlying OpenStack platform and assign to the VMs defined above. 
To assign floating IPs to your project, from the OpenStack horizon dashboard, 
click on Compute -> Access & Security -> Floating IPs. Then click “Allocate IP 
To Project” 5 times. OpenStack will assign 5 IPs to you.

I will update the wiki page soon 
https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_ONAP-2BInstallation-2Bin-2BVanilla-2BOpenStack=DwMGaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs=8ZSFZ8NzhjRZqQVQ6hUFSbtAv3zrNu4s6ys6p-TuyKQ=>
 and send an email when done. Note, however, that DCAE team is still working on 
a DNS issue within the DCAE collector docker container. The issue is tracked in 
this Jira: 
https://jira.onap.org/browse/DCAE-7<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_DCAE-2D7=DwMGaQ=uilaK90D4TOVoH58JNXRgQ=ebJjFMpXijqZjbZCcbF7yJIq2ES6jM0Q-DEcP-qjjeI=sTgGg_7_U5ada56hwhvoUqmrXabov18-uN2trBasJvs=OX51a2fmXvVRJHuK36u2NwrA3eCXCkJBgzQdqgBk9_E=>

Thanks,
Marco

From: <onap-discuss-boun...@lists.onap.org> on behalf of "Gaurav Gupta (c)" 
<guptagau...@vmware.com>
Date: Friday, June 9, 2017 at 6:02 AM
To: "onap-discuss@lists.onap.org" <onap-discuss@lists.onap.org>
Subject: [onap-discuss] DCAE HealthCheck failing while running ete.sh from 
Robot VM on ONAP Environment using Vanila Openstack Mitaka


Hello there



We are running into the DCAE Health check issue while running the ete.sh health



The ONAP Environment is created using below yaml and env files .


https://gerrit.onap.org/r/gitweb?=demo.git;a=blob;f=heat/OpenECOMP/onap_openstack_float.yaml;h=659f94c93b9c5dfae02031ddcae82161ce927318;hb=refs/heads/master<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3F-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.yaml-3Bh-3D659f94c93b9c5dfae02031ddcae82161ce927318-3Bhb-3Drefs_heads_master=DwMF-g=LFYZ-o9_HUMeMTSQicvjIg=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0=O2DDMhNO_94DlSebx9F530e1ha93SaRNyjxvnisBHWg=gcRIgwkOXK3wP7gs8VnaBYBYIrDRBL1MMTVmaSLmMhU=>



https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=heat/OpenECOMP/onap_openstack_float.yaml;h=659f94c93b9c5dfae02031ddcae82161ce927318;hb=refs/heads/master<https://urldefense.proofpoint.com/v2/url?u=https-3A__gerrit.onap.org_r_gitweb-3Fp-3Ddemo.git-3Ba-3Dblob-3Bf-3Dheat_OpenECOMP_onap-5Fopenstack-5Ffloat.yaml-3Bh-3D659f94c93b9c5dfae02031ddcae82161ce927318-3Bhb-3Drefs_heads_master=DwMF-g=LFYZ-o9_HUMeMTSQicvjIg=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0=O2DDMhNO_94DlSebx9F530e1ha93SaRNyjxvnisBHWg=I0cC8ZVMk4ZeQnaJXvx0jNf8cXqShdQEMDetYflCJNU=>

Lab Environment
Openstack Mitaka on Centos7
ONAP 12 VM’s are deployed .
For DCAE VM’s – we see 1 docker pull request and 1 docker being pulled and 
docker is up as seen inside the DCAE VM using docker ps –a command .
[cid:image001.png@01D2E0FE.28D2E2F0]
But while running the healthCheck it seems it is looking for additional docker 
on DCAE VM .
Error Message from healthCheck results is pasted below highlighted in red .

KEYWORD dcae_interface . Check DCAE Results ${resp.json()}
Documentation:


Parse DCAE JSON response and make sure all rows have healthTestStatus=GREEN

Start / End / Elapsed:

20170606 18:45:15.912 / 20170606 18:45:15.957 / 00:00:00.045


18:45:15.956

TRACE

Arguments: [ {'healthTestMessageCode': 'Cluster not deployed', 
'healthTestStatus': 'YELLOW', 'instance': 'NorthIndia', 'service': 
'cdap-helloworld', 'status': 'UNDEPLOYED'} | 'healthTestStatus' | 'GREEN' ]


18:45:15.956

FAIL

Value of dictionary key 'healthTestStatus' does not match: YELLOW != GREEN


with best regards
gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Question on VID

[Gaurav Gupta (c)]

Eden and others


Just drifting a little bit from the discussion  .


Do we have any where the message/Action/Steps  Sequence Flow

a- For SDC  Function from ECOMP Portal till the way down to VNF and till the 
hardware landscape of NFVI Infrastructure .

b - For VID from ECOMP Portal via MSO  till the way down to VNF and till the 
hardware landscape of NFVI Infrastructure .


C- similar needs also exists for  DACE both at the time of SDC as well as while 
the service is running .


with best regards

gaurav


From: Rozin, Eden <er4...@intl.att.com>
Sent: 05 June 2017 12:52:15
To: shentao; Gaurav Gupta (c); 'Dhananjay Pavgi'; ROSE, DANIEL V; 
eden.ro...@att.com; zahi.kapel...@att.com; Hemli, Amichai; ANAPAN-LAVALLE, 
HECTOR A; SHADMI, DAVID
Cc: onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] Question on VID

Hi,

Again, it would be useful to review all the portal functions based on personas:

SDC provide ALL design capability for Designers.
VID provide the Control (Instantiation) and Maintenance (Change Management), 
but not Monitoring and Performance, thus it gives partial OSS capabilities for 
Operations.

Shentao, please share few examples of end-user-self-service to understand it 
better.

Eden

From: shentao [mailto:shen...@chinamobile.com]
Sent: Monday, June 05, 2017 9:56 AM
To: 'Gaurav Gupta (c)' <guptagau...@vmware.com>; 'Dhananjay Pavgi' 
<dp00476...@techmahindra.com>; ROSE, DANIEL V <dr6...@att.com>; 
dsha...@interwise.com; eden.ro...@att.com; zahi.kapel...@att.com; Hemli, 
Amichai <ah0...@intl.att.com>; ANAPAN-LAVALLE, HECTOR A <ha0...@att.com>
Cc: onap-discuss@lists.onap.org
Subject: 答复: [onap-discuss] Question on VID

Dear Gaurav

There are several projects which have portal functions, but some necessary 
functions don’t be provided by any project. (alarm monitor, show performance, 
end-user self-service, etc.)
I suggest that we’d better to generalize all portals and implement functions 
that not exist or not intend to provided in Usecase UI project.

Best regards,
Shentao


发件人: Gaurav Gupta (c) [mailto:guptagau...@vmware.com]
发送时间: 2017年6月5日 14:18
收件人: shentao; 'Dhananjay Pavgi'; 'ROSE, DANIEL V'; 
dsha...@interwise.com<mailto:dsha...@interwise.com>; 
eden.ro...@att.com<mailto:eden.ro...@att.com>; 
zahi.kapel...@att.com<mailto:zahi.kapel...@att.com>; 'HEMLI, AMICHAI'; 
'ANAPAN-LAVALLE, HECTOR A'
抄送: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
主题: Re: [onap-discuss] Question on VID


Dear shentao and all



Does it make sense to put this Usecase UI Project discussion to 
TSC/architecture forum .



with best regards

gaurav




From: shentao <shen...@chinamobile.com<mailto:shen...@chinamobile.com>>
Sent: 05 June 2017 08:06:23
To: 'Dhananjay Pavgi'; Gaurav Gupta (c); 'ROSE, DANIEL V'; 
dsha...@interwise.com<mailto:dsha...@interwise.com>; 
eden.ro...@att.com<mailto:eden.ro...@att.com>; 
zahi.kapel...@att.com<mailto:zahi.kapel...@att.com>; 'HEMLI, AMICHAI'; 
'ANAPAN-LAVALLE, HECTOR A'
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: 答复: [onap-discuss] Question on VID


Dear all



I’m going to build Usecase UI project to solve this problem.

I’ve listed all portal requirements of ONAP in Usecase UI Proposal. And suggest 
portal functions which have not be implemented should build in this project.

The project proposal described specific fuctions. 
(https://wiki.onap.org/display/DW/Usecase+UI+Proposal+Template<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_Usecase-2BUI-2BProposal-2BTemplate=DwMFbw=LFYZ-o9_HUMeMTSQicvjIg=j7NGjvGh9iZaMB0Rh10J5rWBqYaZ6rorgNgeq4qJoUo=sVzAmdaH8eITqbpst2FiHLBk8_jlo-ER2hWKvEMBuyc=ORhoYwVuVTWZNOm407HP8iH_MOWKu1RjTI7jT-Lr10E=>)



Usecase UI will provide GUI for operators and end-users from the point of view 
of use cases.

As a whole project, Usecase UI requiremetns not only includes service design 
and run-time management (resource, performance, fault, security, configuration, 
etc.) for operators,

but also includes self-service management for end-users.



This project targets identifying all GUI requirements which operators and 
end-users need ONAP to support, coordinating GUI parts of each ONAP subsystem, 
filling the gaps for improving GUI functionalities for use case.

All GUI functionalities of ONAP system can be well showed to satisfy the 
requirements from different customers.



Scope:

1.   The Designer Role:

*  Service design (implemented by SDC)

*  VNF onboarding (implemented by SDC)

*  Policy design (implemented by Policy Framework)

*  Closed Loop design (implemented by CLAMP)

2.   The Operator Role:

*  Service LCM (implemented by VID portal)

*  Inventory for services and resources (implemented by A)

*  Monitor system alarms (implemented by this project)

*  Alarm correlation (im

Re: [onap-discuss] Question on VID

[Gaurav Gupta (c)]

Daniel Rose


I assumed that one of the Goal of ONAP is managing the Cloud Infra and Service  
easy for the Telco Operator  .


As in traditional/conventional  Network infra environment Network Element had 
their own EMS/NMS System and even if some functions of NE or all of the NE even 
if virtualized , poses a problem for the operator to look at 2 Screen at least .

a- EMS/NMS for NE and Service/KPI/Network Health Monitoring

b-  Another for monitoring the health of  Virtualized environment

Do you think - having  too many GUI's  would causes a lot of overhead unless 
you are thinking of restricting each GUI to a specific Role .

Do correct if I am missing something subtle .
with best regards
gaurav

From: onap-discuss-boun...@lists.onap.org  
on behalf of ROSE, DANIEL V 
Sent: 02 June 2017 22:52
To: shentao; dsha...@interwise.com; eden.ro...@att.com; zahi.kapel...@att.com; 
HEMLI, AMICHAI; ANAPAN-LAVALLE, HECTOR A
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Question on VID


Hector do you know what kind of gui we have and where it is now?



Thanks,

Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: shentao [mailto:shen...@chinamobile.com]
Sent: Friday, June 02, 2017 5:09 AM
To: ROSE, DANIEL V ; dsha...@interwise.com; eden.ro...@att.com; 
zahi.kapel...@att.com; HEMLI, AMICHAI 
Cc: onap-discuss@lists.onap.org
Subject: 答复: [onap-discuss] Question on VID



Hi, Daniel



Thanks for your reply.

I’m working to summarize portal requirements and want to confirm if VID is 
going to provide a portal for service LCM because it seems no description about 
GUI in VID proposal.

If VID provides a portal for service LCM, I agree with you that there is no 
necessary to build the same part in Usecase UI project.

Btw, as I understand appc provides NB APIs, but not gui. Does service lifecycle 
gui not exist in VID gui?





Best regards,

Shentao





发件人: ROSE, DANIEL V [mailto:dr6...@att.com]
发送时间: 2017年5月31日 4:14
收件人: shentao; dsha...@interwise.com; 
eden.ro...@att.com; 
zahi.kapel...@att.com; HEMLI, AMICHAI
抄送: onap-discuss@lists.onap.org
主题: RE: [onap-discuss] Question on VID



On the one hand, VID already has a portal integration.



To answer your questions in a more broad way I don’t think we want to go about 
creating GUIs for each specific use case (but I guess if the community does 
they can reply and keep me honest) and that is what I got as the output from a 
read of your project proposal. The idea in my opinion is to add capabilities to 
the platform. When you look at it that way I see 3 gui areas Service Design, 
Service Instantiation and Service Lifecycle. Service design is already covered 
by sdc and that project. Service Instantiation is covered by VID and service 
lifecycle is covered by appc gui, which may or may not be open sourced right 
now I am not sure but I am sure we would be ok with doing so if its not. Then 
if the release 1 use cases need enhancements t that we should implement them 
generically and any vnf can use it. I certainly don’t want to build the same 
thing for vcpe and volte!



Either way I don’t know what exactly your project is looking to do. Can you 
clarify your project proposal a bit so vi d can better work together with you?



Thanks,

Daniel Rose

ECOMP / ONAP

com.att.ecomp

732-420-7308



From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of shentao
Sent: Tuesday, May 30, 2017 3:52 PM
To: dsha...@interwise.com; 
eden.ro...@att.com; 
zahi.kapel...@att.com; HEMLI, AMICHAI 
>
Cc: onap-discuss@lists.onap.org
Subject: [onap-discuss] Question on VID



Hi, Michael and Helmi



I’m working for UseCase UI project and found that there is a relationship 
between UseCase UI and VID project.

I’ve looked through the VID proposal and have some questions about VID project.

Could you help me to confirm questions about VID project. Thank you very much.



1.   Is VID project planning to provide a portal component which will 
integrate into Portal Platform?



2.   If VID project provides a portal component, what detail functions will 
be provided?

UseCase UI project will support managements of service & VNF lifecycle, I don’t 
know whether VID has a duplicate scope because there is service & VNF 
description in VID scope.



3.   In UseCase UI proposal, seed code is linking to VID’s repo 

[onap-discuss] How to get the Code reviewer rights/permission for Demo Project/Repo

[Gaurav Gupta (c)]

Hi There


I wanted to know the procedure for getting the Code reviewer rights for the 
ONAP Demo Project/Repo.



Any specific prerequisite that should be followed


with best regards

gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] Info needed about acceptance criteria or checking the sanity of the ONAP Environment

[Gaurav Gupta (c)]

Thanks Marco .


Let me and team  try that and get back to the community with the results

thanks

Gaurav



From: PLATANIA, MARCO (MARCO) <plata...@research.att.com>
Sent: 29 May 2017 21:05
To: Gaurav Gupta (c); onap-discuss@lists.onap.org
Cc: Kapil Gupta (c)
Subject: Re: [onap-discuss] Info needed about acceptance criteria or checking 
the sanity of the ONAP Environment


I think both options end up running the same test suite. That is what we are 
doing, so I would say yes, it’s sufficient. Regarding point 1, the command that 
you need to run from the terminal is ./ete.sh –i health



Thanks,

Marco



From: <onap-discuss-boun...@lists.onap.org> on behalf of "Gaurav Gupta (c)" 
<guptagau...@vmware.com>
Date: Monday, May 29, 2017 at 9:36 AM
To: "onap-discuss@lists.onap.org" <onap-discuss@lists.onap.org>
Cc: "Kapil Gupta (c)" <gka...@vmware.com>
Subject: [onap-discuss] Info needed about acceptance criteria or checking the 
sanity of the ONAP Environment



Hello There



We have created ONAP stack on  Openstack Mitaka ( Centos7 ) , We are looking 
for some info about the ways to do the sanity check for the ONAP Environment .



There are 2 ways that are present .



using the

a- ete.sh with healthcheck as parameter from robot vm  .

b-

Log into the vm1-robot VM (get  from cloud provider)

-   In the shell run: docker exec openecompete_container 
/var/opt/OpenECOMP_ETE/runTags.sh -i health



Any suggestion whether the above 2 are sufficient  or there are additional 
testing means to check if the ONAP environment is good .



Thanks

Gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Info needed about acceptance criteria or checking the sanity of the ONAP Environment

[Gaurav Gupta (c)]

Hello There


We have created ONAP stack on  Openstack Mitaka ( Centos7 ) , We are looking 
for some info about the ways to do the sanity check for the ONAP Environment .



There are 2 ways that are present .


using the

a- ete.sh with healthcheck as parameter from robot vm  .

b-

Log into the vm1-robot VM (get  from cloud provider)
-   In the shell run: docker exec openecompete_container 
/var/opt/OpenECOMP_ETE/runTags.sh -i health


Any suggestion whether the above 2 are sufficient  or there are additional 
testing means to check if the ONAP environment is good .


Thanks

Gaurav
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss