Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-09 Thread Xin Miao
What is the relation between the blueprint of each individual MS and the 
blueprint of a control loop? The CL blueprint is built from the individual ones?

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: LUCAS, JOHN (JACK) [mailto:jflu...@research.att.com]
Sent: 2018年8月9日 AM 7:52
To: onap-discuss@lists.onap.org; NGUEKO, GERVAIS-MARTIAL ; 
Xin Miao ; JI, LUSHENG (LUSHENG) ; 
VENKATESH KUMAR, VIJAY ; Horn, Linda (Nokia - US/Murray Hill) 

Cc: SHACHAM, RON (RON) 
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Yes, a blueprint can contain multiple nodes, each representing a microservice.  
It can also contain one or more policy nodes for each microservice, assuming 
that the microservice has been designed to be configured via policy.

Jack Lucas

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
[mailto:onap-discuss@lists.onap.org] On Behalf Of NGUEKO, GERVAIS-MARTIAL
Sent: Wednesday, August 8, 2018 4:52 PM
To: Xin Miao mailto:xin.m...@huawei.com>>; JI, LUSHENG 
(LUSHENG) mailto:l...@research.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH 
KUMAR, VIJAY mailto:vv7...@att.com>>; Horn, Linda (Nokia - 
US/Murray Hill) mailto:linda.h...@nokia.com>>
Cc: SHACHAM, RON (RON) 
mailto:rshac...@research.att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Vijay, Lusheng,

I feel your clarifications are lacking some aspects, because a blueprint is 
theoretically related to a complete Control-Loop flow and not just One 
micro-service.
So can you give even more clarification on that aspect, meaning today is it 
possible to have a blueprint representing a complete control-loop flow with 
several micro-service ,each of the micro-service being configurable via a 
policy?
Also today are those dynamic micro-service configurable by policy?  meaning is 
there a policy-model existing for each of those micro-service?

Thanks,
Martial

From: Xin Miao mailto:xin.m...@huawei.com>>
Sent: mercredi 8 août 2018 18:55
To: JI, LUSHENG mailto:l...@research.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH 
KUMAR, VIJAY mailto:vv7...@att.com>>; Ngueko, Gervais-Martial 
mailto:gn4...@intl.att.com>>; Horn, Linda (Nokia - 
US/Murray Hill) mailto:linda.h...@nokia.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

HI, Lusheng,

Very nice review and background introduction. Really appreciated!

Ron,

Is there any document on how the blueprint template for each DCAE component 
works? How multiple blueprints for the same micro-services are grouped per 
control loop deployment?  We can see and provide the blueprints for a component 
to repo.  Can we run the bootstrap  manually to launch a control loop for 
testing or demo purpose?

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: JI, LUSHENG (LUSHENG) [mailto:l...@research.att.com]
Sent: 2018年8月8日 AM 9:48
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH 
KUMAR, VIJAY mailto:vv7...@att.com>>; Xin Miao 
mailto:xin.m...@huawei.com>>; NGUEKO, GERVAIS-MARTIAL 
mailto:gn4...@intl.att.com>>; Horn, Linda (Nokia - 
US/Murray Hill) mailto:linda.h...@nokia.com>>
Cc: SHACHAM, RON (RON) 
mailto:rshac...@research.att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Miao,

More details following what Vijay said.

DCAE service components (collectors, analytics, etc) can be deployed in two 
ways:


  1.  Dynamic deployment: CLAMP triggered deployment.  CLAMP tells DCAE to 
deploy a particular blueprint, which specifies a set of service components for 
realizing a particular service design.  These components are then launched from 
DCAE platform.  Life cycle and configuration of dynamically deployed components 
can be managed from CLAMP and Policy.


  1.  Static deployment: deployed at ONAP startup time by DCAE bootstrap 
process.  A startup script will call Cloudify Manager for deploying preloaded 
blueprints, each specifies a set of DCAE service components, and resulting 
these DCAE service components launched at this bootstrap.  These components can 
be managed for confi

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-09 Thread David Perez
Hi all,

Thanks for starting this thread and the provided information.

Where can we find an example of a control loop blueprint? And where in the 
wiki/readthedocs are the blueprint and the onboarding and distribution process 
via SDC explained?

Regards,
David


 Original message 
From: Martial 
Date: 8/8/18 22:53 (GMT+01:00)
To: Xin Miao , "JI, LUSHENG" , 
onap-discuss@lists.onap.org, "VENKATESH KUMAR, VIJAY" , "Horn, 
Linda (Nokia - US/Murray Hill)" 
Cc: "SHACHAM, RON" 
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Vijay, Lusheng,

I feel your clarifications are lacking some aspects, because a blueprint is 
theoretically related to a complete Control-Loop flow and not just One 
micro-service.
So can you give even more clarification on that aspect, meaning today is it 
possible to have a blueprint representing a complete control-loop flow with 
several micro-service ,each of the micro-service being configurable via a 
policy?
Also today are those dynamic micro-service configurable by policy?  meaning is 
there a policy-model existing for each of those micro-service?

Thanks,
Martial

From: Xin Miao 
Sent: mercredi 8 août 2018 18:55
To: JI, LUSHENG ; onap-discuss@lists.onap.org; VENKATESH 
KUMAR, VIJAY ; Ngueko, Gervais-Martial ; 
Horn, Linda (Nokia - US/Murray Hill) 
Cc: SHACHAM, RON 
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

HI, Lusheng,

Very nice review and background introduction. Really appreciated!

Ron,

Is there any document on how the blueprint template for each DCAE component 
works? How multiple blueprints for the same micro-services are grouped per 
control loop deployment?  We can see and provide the blueprints for a component 
to repo.  Can we run the bootstrap  manually to launch a control loop for 
testing or demo purpose?

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: JI, LUSHENG (LUSHENG) [mailto:l...@research.att.com]
Sent: 2018年8月8日 AM 9:48
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH 
KUMAR, VIJAY mailto:vv7...@att.com>>; Xin Miao 
mailto:xin.m...@huawei.com>>; NGUEKO, GERVAIS-MARTIAL 
mailto:gn4...@intl.att.com>>; Horn, Linda (Nokia - 
US/Murray Hill) mailto:linda.h...@nokia.com>>
Cc: SHACHAM, RON (RON) 
mailto:rshac...@research.att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Miao,

More details following what Vijay said.

DCAE service components (collectors, analytics, etc) can be deployed in two 
ways:


  1.  Dynamic deployment: CLAMP triggered deployment.  CLAMP tells DCAE to 
deploy a particular blueprint, which specifies a set of service components for 
realizing a particular service design.  These components are then launched from 
DCAE platform.  Life cycle and configuration of dynamically deployed components 
can be managed from CLAMP and Policy.


  1.  Static deployment: deployed at ONAP startup time by DCAE bootstrap 
process.  A startup script will call Cloudify Manager for deploying preloaded 
blueprints, each specifies a set of DCAE service components, and resulting 
these DCAE service components launched at this bootstrap.  These components can 
be managed for configuration and lifecycle by DCAE, but they are not known in 
CLAMP and Policy therefore cannot be reconfigured through CLAMP.

Dynamic deployment has been the intention of DCAE and static deployment as 
testing methodology for our internal uses.  However, because CLMAP has not been 
part of the ONAP automated testing and use flows, we use static deployment for 
all DCAE service components (including TCA for use cases other than vCPE) for 
ONAP R1 and R2 testing flows.  Only in R2 the TCA instance used by R2 vCPE use 
case is dynamically deployed by CLAMP because that testing flow allows manual 
intervention.

For any service components (including the new restconf collector) to be 
dynamically deployed, it will need to be on-boarded to SDC.  That is, the DCAE 
service component’s TOSCA model is added to SDC catalog.  Then someone uses SDC 
Design Studio to make a DCAE service design.  SDC will generate a blueprint 
template for as the result and push to DCAE.   At run-time someone will use 
CLAMP GUI to trigger the deployment of this blueprint.

Because dynamic deployment involves multiple project teams, the best forum for 
discussing the details is Pam’s Close Loop subcommittee.  Also Ron Shacham 
(cc-ed) worked through the TCA for vCPE use case.  He would be the person most 
knowledgeable in the whole process of walking a blueprint through the steps.

Thanks,
Lusheng Ji



From: mailto:onap-discuss@lists.onap.org>>

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Martial
Vijay, Lusheng,

I feel your clarifications are lacking some aspects, because a blueprint is 
theoretically related to a complete Control-Loop flow and not just One 
micro-service.
So can you give even more clarification on that aspect, meaning today is it 
possible to have a blueprint representing a complete control-loop flow with 
several micro-service ,each of the micro-service being configurable via a 
policy?
Also today are those dynamic micro-service configurable by policy?  meaning is 
there a policy-model existing for each of those micro-service?

Thanks,
Martial

From: Xin Miao 
Sent: mercredi 8 août 2018 18:55
To: JI, LUSHENG ; onap-discuss@lists.onap.org; VENKATESH 
KUMAR, VIJAY ; Ngueko, Gervais-Martial ; 
Horn, Linda (Nokia - US/Murray Hill) 
Cc: SHACHAM, RON 
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

HI, Lusheng,

Very nice review and background introduction. Really appreciated!

Ron,

Is there any document on how the blueprint template for each DCAE component 
works? How multiple blueprints for the same micro-services are grouped per 
control loop deployment?  We can see and provide the blueprints for a component 
to repo.  Can we run the bootstrap  manually to launch a control loop for 
testing or demo purpose?

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: JI, LUSHENG (LUSHENG) [mailto:l...@research.att.com]
Sent: 2018年8月8日 AM 9:48
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; VENKATESH 
KUMAR, VIJAY mailto:vv7...@att.com>>; Xin Miao 
mailto:xin.m...@huawei.com>>; NGUEKO, GERVAIS-MARTIAL 
mailto:gn4...@intl.att.com>>; Horn, Linda (Nokia - 
US/Murray Hill) mailto:linda.h...@nokia.com>>
Cc: SHACHAM, RON (RON) 
mailto:rshac...@research.att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Miao,

More details following what Vijay said.

DCAE service components (collectors, analytics, etc) can be deployed in two 
ways:


  1.  Dynamic deployment: CLAMP triggered deployment.  CLAMP tells DCAE to 
deploy a particular blueprint, which specifies a set of service components for 
realizing a particular service design.  These components are then launched from 
DCAE platform.  Life cycle and configuration of dynamically deployed components 
can be managed from CLAMP and Policy.


  1.  Static deployment: deployed at ONAP startup time by DCAE bootstrap 
process.  A startup script will call Cloudify Manager for deploying preloaded 
blueprints, each specifies a set of DCAE service components, and resulting 
these DCAE service components launched at this bootstrap.  These components can 
be managed for configuration and lifecycle by DCAE, but they are not known in 
CLAMP and Policy therefore cannot be reconfigured through CLAMP.

Dynamic deployment has been the intention of DCAE and static deployment as 
testing methodology for our internal uses.  However, because CLMAP has not been 
part of the ONAP automated testing and use flows, we use static deployment for 
all DCAE service components (including TCA for use cases other than vCPE) for 
ONAP R1 and R2 testing flows.  Only in R2 the TCA instance used by R2 vCPE use 
case is dynamically deployed by CLAMP because that testing flow allows manual 
intervention.

For any service components (including the new restconf collector) to be 
dynamically deployed, it will need to be on-boarded to SDC.  That is, the DCAE 
service component’s TOSCA model is added to SDC catalog.  Then someone uses SDC 
Design Studio to make a DCAE service design.  SDC will generate a blueprint 
template for as the result and push to DCAE.   At run-time someone will use 
CLAMP GUI to trigger the deployment of this blueprint.

Because dynamic deployment involves multiple project teams, the best forum for 
discussing the details is Pam’s Close Loop subcommittee.  Also Ron Shacham 
(cc-ed) worked through the TCA for vCPE use case.  He would be the person most 
knowledgeable in the whole process of walking a blueprint through the steps.

Thanks,
Lusheng Ji



From: mailto:onap-discuss@lists.onap.org>> on 
behalf of "VENKATESH KUMAR, VIJAY" mailto:vv7...@att.com>>
Reply-To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>, "VENKATESH 
KUMAR, VIJAY" mailto:vv7...@att.com>>
Date: Wednesday, August 8, 2018 at 9:44 AM
To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>, 
"xin.m...@huawei.com<mailto:xin.m...@huawei.com>" 
mailto:xin.m...@huawei.com>>, "NGUEKO, GERVAIS-MARTIAL" 
mailto:gn4...@intl.att.com

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Xin Miao
HI, Lusheng,

Very nice review and background introduction. Really appreciated!

Ron,

Is there any document on how the blueprint template for each DCAE component 
works? How multiple blueprints for the same micro-services are grouped per 
control loop deployment?  We can see and provide the blueprints for a component 
to repo.  Can we run the bootstrap  manually to launch a control loop for 
testing or demo purpose?

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: JI, LUSHENG (LUSHENG) [mailto:l...@research.att.com]
Sent: 2018年8月8日 AM 9:48
To: onap-discuss@lists.onap.org; VENKATESH KUMAR, VIJAY ; Xin 
Miao ; NGUEKO, GERVAIS-MARTIAL ; 
Horn, Linda (Nokia - US/Murray Hill) 
Cc: SHACHAM, RON (RON) 
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Miao,

More details following what Vijay said.

DCAE service components (collectors, analytics, etc) can be deployed in two 
ways:


  1.  Dynamic deployment: CLAMP triggered deployment.  CLAMP tells DCAE to 
deploy a particular blueprint, which specifies a set of service components for 
realizing a particular service design.  These components are then launched from 
DCAE platform.  Life cycle and configuration of dynamically deployed components 
can be managed from CLAMP and Policy.


  1.  Static deployment: deployed at ONAP startup time by DCAE bootstrap 
process.  A startup script will call Cloudify Manager for deploying preloaded 
blueprints, each specifies a set of DCAE service components, and resulting 
these DCAE service components launched at this bootstrap.  These components can 
be managed for configuration and lifecycle by DCAE, but they are not known in 
CLAMP and Policy therefore cannot be reconfigured through CLAMP.

Dynamic deployment has been the intention of DCAE and static deployment as 
testing methodology for our internal uses.  However, because CLMAP has not been 
part of the ONAP automated testing and use flows, we use static deployment for 
all DCAE service components (including TCA for use cases other than vCPE) for 
ONAP R1 and R2 testing flows.  Only in R2 the TCA instance used by R2 vCPE use 
case is dynamically deployed by CLAMP because that testing flow allows manual 
intervention.

For any service components (including the new restconf collector) to be 
dynamically deployed, it will need to be on-boarded to SDC.  That is, the DCAE 
service component’s TOSCA model is added to SDC catalog.  Then someone uses SDC 
Design Studio to make a DCAE service design.  SDC will generate a blueprint 
template for as the result and push to DCAE.   At run-time someone will use 
CLAMP GUI to trigger the deployment of this blueprint.

Because dynamic deployment involves multiple project teams, the best forum for 
discussing the details is Pam’s Close Loop subcommittee.  Also Ron Shacham 
(cc-ed) worked through the TCA for vCPE use case.  He would be the person most 
knowledgeable in the whole process of walking a blueprint through the steps.

Thanks,
Lusheng Ji



From: mailto:onap-discuss@lists.onap.org>> on 
behalf of "VENKATESH KUMAR, VIJAY" mailto:vv7...@att.com>>
Reply-To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>, "VENKATESH 
KUMAR, VIJAY" mailto:vv7...@att.com>>
Date: Wednesday, August 8, 2018 at 9:44 AM
To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>, 
"xin.m...@huawei.com<mailto:xin.m...@huawei.com>" 
mailto:xin.m...@huawei.com>>, "NGUEKO, GERVAIS-MARTIAL" 
mailto:gn4...@intl.att.com>>, "Horn, Linda (Nokia - 
US/Murray Hill)" mailto:linda.h...@nokia.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.

Just to clarify, any services in DCAE can be deployed dynamically. Only TCA is 
handled via CLAMP currently though (models/blueprint are pre-loaded in 
SDC/CLAMP to distribute/deploy). All the other services when onboarded through 
SDC/Tosca_lab can be instantiated dynamically.

For VESCollector, we have blueprint which takes topics an input.  This 
blueprint can be loaded into SDC catalog manually and distributed by 
designer/clamp operator on demand to support specific control loop if required. 
However as the collectors are generic (not tied to specific usecase) – they can 
be shared across different CL cases as done in R1/R2.

Thanks,
Vijay

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@list

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Lji
Miao,

More details following what Vijay said.

DCAE service components (collectors, analytics, etc) can be deployed in two 
ways:


  1.  Dynamic deployment: CLAMP triggered deployment.  CLAMP tells DCAE to 
deploy a particular blueprint, which specifies a set of service components for 
realizing a particular service design.  These components are then launched from 
DCAE platform.  Life cycle and configuration of dynamically deployed components 
can be managed from CLAMP and Policy.


  1.  Static deployment: deployed at ONAP startup time by DCAE bootstrap 
process.  A startup script will call Cloudify Manager for deploying preloaded 
blueprints, each specifies a set of DCAE service components, and resulting 
these DCAE service components launched at this bootstrap.  These components can 
be managed for configuration and lifecycle by DCAE, but they are not known in 
CLAMP and Policy therefore cannot be reconfigured through CLAMP.

Dynamic deployment has been the intention of DCAE and static deployment as 
testing methodology for our internal uses.  However, because CLMAP has not been 
part of the ONAP automated testing and use flows, we use static deployment for 
all DCAE service components (including TCA for use cases other than vCPE) for 
ONAP R1 and R2 testing flows.  Only in R2 the TCA instance used by R2 vCPE use 
case is dynamically deployed by CLAMP because that testing flow allows manual 
intervention.

For any service components (including the new restconf collector) to be 
dynamically deployed, it will need to be on-boarded to SDC.  That is, the DCAE 
service component’s TOSCA model is added to SDC catalog.  Then someone uses SDC 
Design Studio to make a DCAE service design.  SDC will generate a blueprint 
template for as the result and push to DCAE.   At run-time someone will use 
CLAMP GUI to trigger the deployment of this blueprint.

Because dynamic deployment involves multiple project teams, the best forum for 
discussing the details is Pam’s Close Loop subcommittee.  Also Ron Shacham 
(cc-ed) worked through the TCA for vCPE use case.  He would be the person most 
knowledgeable in the whole process of walking a blueprint through the steps.

Thanks,
Lusheng Ji



From:  on behalf of "VENKATESH KUMAR, VIJAY" 

Reply-To: "onap-discuss@lists.onap.org" , 
"VENKATESH KUMAR, VIJAY" 
Date: Wednesday, August 8, 2018 at 9:44 AM
To: "onap-discuss@lists.onap.org" , 
"xin.m...@huawei.com" , "NGUEKO, GERVAIS-MARTIAL" 
, "Horn, Linda (Nokia - US/Murray Hill)" 

Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.


Just to clarify, any services in DCAE can be deployed dynamically. Only TCA is 
handled via CLAMP currently though (models/blueprint are pre-loaded in 
SDC/CLAMP to distribute/deploy). All the other services when onboarded through 
SDC/Tosca_lab can be instantiated dynamically.

For VESCollector, we have blueprint which takes topics an input.  This 
blueprint can be loaded into SDC catalog manually and distributed by 
designer/clamp operator on demand to support specific control loop if required. 
However as the collectors are generic (not tied to specific usecase) – they can 
be shared across different CL cases as done in R1/R2.

Thanks,
Vijay

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: Wednesday, August 08, 2018 9:22 AM
To: NGUEKO, GERVAIS-MARTIAL ; onap-discuss 
; Horn, Linda (Nokia - US/Murray Hill) 

Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Understood. Thanks a lot for the clarification.

How about Policy? CLAMP only creates new policy and deploys them.

Does CLAMP support to create more than one policy chaining (sequential action 
type of operational policy )per control loop at design time?

Thanks,

Xin Miao
M: +1-4692685226
E: xin.m...@huawei.com<mailto:xin.m...@huawei.com>
2012实验室-硅谷网络技术实验室
2012 Laboratories-Silicon Valley Network Technology Lab
From: Ngueko, Gervais-Martial
To: 
onap-discussmailto:onap-discuss@lists.onap.org>>;Xin
 Miaomailto:xin.m...@huawei.com>>;Horn, Linda (Nokia - 
US/Murray Hill)mailto:linda.h...@nokia.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp
Time: 2018-08-08 07:22:52

Hi Xin,

I confirm what Adam said. At this stage you will need to create a new blueprint 
with the correct DMAAP configuration and then distribute it to CLAMP so that it 
can be deployed.

Note that on-demand collector deployment is not supported by DCAE itself at 
this point, so it has to be supported by DCAE first before CLAMP can support 
it. Also, one  Holmes instance per Control Loop is not supported by 
Holmes/DCAE, so this is also an area that will need Holmes/DCAE support before 

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Vijay VK
Just to clarify, any services in DCAE can be deployed dynamically. Only TCA is 
handled via CLAMP currently though (models/blueprint are pre-loaded in 
SDC/CLAMP to distribute/deploy). All the other services when onboarded through 
SDC/Tosca_lab can be instantiated dynamically.

For VESCollector, we have blueprint which takes topics an input.  This 
blueprint can be loaded into SDC catalog manually and distributed by 
designer/clamp operator on demand to support specific control loop if required. 
However as the collectors are generic (not tied to specific usecase) – they can 
be shared across different CL cases as done in R1/R2.

Thanks,
Vijay

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: Wednesday, August 08, 2018 9:22 AM
To: NGUEKO, GERVAIS-MARTIAL ; onap-discuss 
; Horn, Linda (Nokia - US/Murray Hill) 

Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Understood. Thanks a lot for the clarification.

How about Policy? CLAMP only creates new policy and deploys them.

Does CLAMP support to create more than one policy chaining (sequential action 
type of operational policy )per control loop at design time?

Thanks,

Xin Miao
M: +1-4692685226
E: xin.m...@huawei.com<mailto:xin.m...@huawei.com>
2012实验室-硅谷网络技术实验室
2012 Laboratories-Silicon Valley Network Technology Lab
From: Ngueko, Gervais-Martial
To: 
onap-discussmailto:onap-discuss@lists.onap.org>>;Xin
 Miaomailto:xin.m...@huawei.com>>;Horn, Linda (Nokia - 
US/Murray Hill)mailto:linda.h...@nokia.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp
Time: 2018-08-08 07:22:52

Hi Xin,

I confirm what Adam said. At this stage you will need to create a new blueprint 
with the correct DMAAP configuration and then distribute it to CLAMP so that it 
can be deployed.

Note that on-demand collector deployment is not supported by DCAE itself at 
this point, so it has to be supported by DCAE first before CLAMP can support 
it. Also, one  Holmes instance per Control Loop is not supported by 
Holmes/DCAE, so this is also an area that will need Holmes/DCAE support before 
it can be done via CLAMP.

Br,
Martial

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: mardi 7 août 2018 16:41
To: Horn, Linda (Nokia - US/Murray Hill) 
mailto:linda.h...@nokia.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Hi, Linda,

Please refer to the following  CCVPN Close Loop wiki page for the Restconf 
collector in DCAE session  from the high level.  The page is under construction.

https://wiki.onap.org/display/DW/CCVPN+Close+Loop<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_CCVPN-2BClose-2BLoop=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=_9Jlwl24cXmOrt_XOMKtC3aGkkZwuKoKxSPqhA05BWk=IzLUgi1XcssgabsQcEs8UPGkBv0u3uWH7wPhwDGCqUQ=EsuXrJpKYwWKffGDgInJnQV23gU__Zxvw73KGXB19QI=>.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Horn, Linda (Nokia - US/Murray Hill) [mailto:linda.h...@nokia.com]
Sent: 2018年8月7日 AM 9:01
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

What is a Restconf Collector and for what types of events is it used?  How is 
it different from the normal VES Collector?

Linda
---
Linda S. Horn, DMTS
ATF Architecture Open RAN Initiatives
Mobile Networks, Nokia
Phone:  +1-908-679-6580

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: Tuesday, August 07, 2018 9:47 AM
To: Krysiak, Adam (Nokia - PL/Wroclaw) 
mailto:adam.krys...@nokia.com>>; Ngueko, 
Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Sébastien 
Determe mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m.

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Xin Miao

Understood. Thanks a lot for the clarification.

How about Policy? CLAMP only creates new policy and deploys them.

Does CLAMP support to create more than one policy chaining (sequential action 
type of operational policy )per control loop at design time?

Thanks,


Xin Miao
M: +1-4692685226
E: xin.m...@huawei.com<mailto:xin.m...@huawei.com>
2012实验室-硅谷网络技术实验室
2012 Laboratories-Silicon Valley Network Technology Lab

From: Ngueko, Gervais-Martial
To: 
onap-discussmailto:onap-discuss@lists.onap.org>>;Xin
 Miaomailto:xin.m...@huawei.com>>;Horn, Linda (Nokia - 
US/Murray Hill)mailto:linda.h...@nokia.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp
Time: 2018-08-08 07:22:52

Hi Xin,

I confirm what Adam said. At this stage you will need to create a new blueprint 
with the correct DMAAP configuration and then distribute it to CLAMP so that it 
can be deployed.

Note that on-demand collector deployment is not supported by DCAE itself at 
this point, so it has to be supported by DCAE first before CLAMP can support 
it. Also, one  Holmes instance per Control Loop is not supported by 
Holmes/DCAE, so this is also an area that will need Holmes/DCAE support before 
it can be done via CLAMP.

Br,
Martial

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: mardi 7 août 2018 16:41
To: Horn, Linda (Nokia - US/Murray Hill) ; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Hi, Linda,

Please refer to the following  CCVPN Close Loop wiki page for the Restconf 
collector in DCAE session  from the high level.  The page is under construction.

https://wiki.onap.org/display/DW/CCVPN+Close+Loop<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_CCVPN-2BClose-2BLoop=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=_9Jlwl24cXmOrt_XOMKtC3aGkkZwuKoKxSPqhA05BWk=IzLUgi1XcssgabsQcEs8UPGkBv0u3uWH7wPhwDGCqUQ=EsuXrJpKYwWKffGDgInJnQV23gU__Zxvw73KGXB19QI=>.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Horn, Linda (Nokia - US/Murray Hill) [mailto:linda.h...@nokia.com]
Sent: 2018年8月7日 AM 9:01
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

What is a Restconf Collector and for what types of events is it used?  How is 
it different from the normal VES Collector?

Linda
---
Linda S. Horn, DMTS
ATF Architecture Open RAN Initiatives
Mobile Networks, Nokia
Phone:  +1-908-679-6580

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: Tuesday, August 07, 2018 9:47 AM
To: Krysiak, Adam (Nokia - PL/Wroclaw) 
mailto:adam.krys...@nokia.com>>; Ngueko, 
Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Sébastien 
Determe mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com]
Sent: 2018年8月7日 AM 8:40
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>; Sébastien Determe 
mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Hi Xin,



I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).
You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-08 Thread Martial
Hi Xin,

I confirm what Adam said. At this stage you will need to create a new blueprint 
with the correct DMAAP configuration and then distribute it to CLAMP so that it 
can be deployed.

Note that on-demand collector deployment is not supported by DCAE itself at 
this point, so it has to be supported by DCAE first before CLAMP can support 
it. Also, one  Holmes instance per Control Loop is not supported by 
Holmes/DCAE, so this is also an area that will need Holmes/DCAE support before 
it can be done via CLAMP.

Br,
Martial

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: mardi 7 août 2018 16:41
To: Horn, Linda (Nokia - US/Murray Hill) ; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Hi, Linda,

Please refer to the following  CCVPN Close Loop wiki page for the Restconf 
collector in DCAE session  from the high level.  The page is under construction.

https://wiki.onap.org/display/DW/CCVPN+Close+Loop<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_CCVPN-2BClose-2BLoop=DwMGaQ=LFYZ-o9_HUMeMTSQicvjIg=_9Jlwl24cXmOrt_XOMKtC3aGkkZwuKoKxSPqhA05BWk=IzLUgi1XcssgabsQcEs8UPGkBv0u3uWH7wPhwDGCqUQ=EsuXrJpKYwWKffGDgInJnQV23gU__Zxvw73KGXB19QI=>.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Horn, Linda (Nokia - US/Murray Hill) [mailto:linda.h...@nokia.com]
Sent: 2018年8月7日 AM 9:01
To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

What is a Restconf Collector and for what types of events is it used?  How is 
it different from the normal VES Collector?

Linda
---
Linda S. Horn, DMTS
ATF Architecture Open RAN Initiatives
Mobile Networks, Nokia
Phone:  +1-908-679-6580

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: Tuesday, August 07, 2018 9:47 AM
To: Krysiak, Adam (Nokia - PL/Wroclaw) 
mailto:adam.krys...@nokia.com>>; Ngueko, 
Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Sébastien 
Determe mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com]
Sent: 2018年8月7日 AM 8:40
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>; Sébastien Determe 
mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Hi Xin,



I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).
You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available.
It's your AT's responsibility to pull events from DMaaP. From Clamp perspective 
it's transparent what's the event type and topic.
Clamp will just send configuration parameters before deployment.
Unfortunately currently using own AT is not supported by Clamp.

Br,
Adam Krysiak
Software Engineer
MN MANO RD ONAP-UI-ML DEVOPS WRO 2 SG
Nokia
Contact number: +48691441316

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> on behalf of 
Xin Miao mailto:xin.m...@huawei.com>>
Sent: Saturday, August 4, 2018 6:43:56 PM
To: Ngueko, Gervais-Martial
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON; VENKATESH KUMAR, VIJAY
Subject:

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-07 Thread Xin Miao
Hi, Linda,

Please refer to the following  CCVPN Close Loop wiki page for the Restconf 
collector in DCAE session  from the high level.  The page is under construction.

https://wiki.onap.org/display/DW/CCVPN+Close+Loop.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Horn, Linda (Nokia - US/Murray Hill) [mailto:linda.h...@nokia.com]
Sent: 2018年8月7日 AM 9:01
To: onap-discuss@lists.onap.org; Xin Miao 
Subject: RE: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

What is a Restconf Collector and for what types of events is it used?  How is 
it different from the normal VES Collector?

Linda
---
Linda S. Horn, DMTS
ATF Architecture Open RAN Initiatives
Mobile Networks, Nokia
Phone:  +1-908-679-6580

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: Tuesday, August 07, 2018 9:47 AM
To: Krysiak, Adam (Nokia - PL/Wroclaw) 
mailto:adam.krys...@nokia.com>>; Ngueko, 
Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Sébastien 
Determe mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com]
Sent: 2018年8月7日 AM 8:40
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>; Sébastien Determe 
mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Hi Xin,



I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).
You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available.
It's your AT's responsibility to pull events from DMaaP. From Clamp perspective 
it's transparent what's the event type and topic.
Clamp will just send configuration parameters before deployment.
Unfortunately currently using own AT is not supported by Clamp.

Br,
Adam Krysiak
Software Engineer
MN MANO RD ONAP-UI-ML DEVOPS WRO 2 SG
Nokia
Contact number: +48691441316

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> on behalf of 
Xin Miao mailto:xin.m...@huawei.com>>
Sent: Saturday, August 4, 2018 6:43:56 PM
To: Ngueko, Gervais-Martial
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON; VENKATESH KUMAR, VIJAY
Subject: Re: [onap-discuss] [CLAMP][DCAE]RE: New Collector in Clamp


So  at runtime if I want to bring up new instance of control loop that would 
have the VES collector  receiving different event data and publish them on 
DMAAP with different topics from existing control loop, what I am going to do?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com<mailto:xin.m...@huawei.com>

 [cid:image001.jpg@01CD505D.C18C2420]



From: Ngueko, Gervais-Martial [mailto:gn4...@intl.att.com]
Sent: 2018年7月30日 PM 3:41
To: Xin Miao mailto:xin.m...@huawei.com>>
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON mailto:rshac...@research.att.com>>
Subject: [CLAMP][DCAE]RE: New Collector in Clamp



Hi,



Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE 
and used by all the mS and all control loops.

So the collector’s, currently, are not deployed via CLAMP and there is no 
cloudi

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-07 Thread Horn, Linda (Nokia - US/Murray Hill)
What is a Restconf Collector and for what types of events is it used?  How is 
it different from the normal VES Collector?

Linda
---
Linda S. Horn, DMTS
ATF Architecture Open RAN Initiatives
Mobile Networks, Nokia
Phone:  +1-908-679-6580

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: Tuesday, August 07, 2018 9:47 AM
To: Krysiak, Adam (Nokia - PL/Wroclaw) ; Ngueko, 
Gervais-Martial ; onap-discuss@lists.onap.org; Sébastien 
Determe 
Cc: SHACHAM, RON ; VENKATESH KUMAR, VIJAY 

Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp

Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com]
Sent: 2018年8月7日 AM 8:40
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>; 
onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; Xin Miao 
mailto:xin.m...@huawei.com>>; Sébastien Determe 
mailto:sd3...@intl.att.com>>
Cc: SHACHAM, RON mailto:rshac...@research.att.com>>; 
VENKATESH KUMAR, VIJAY mailto:vv7...@att.com>>
Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Hi Xin,



I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).
You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available.
It's your AT's responsibility to pull events from DMaaP. From Clamp perspective 
it's transparent what's the event type and topic.
Clamp will just send configuration parameters before deployment.
Unfortunately currently using own AT is not supported by Clamp.

Br,
Adam Krysiak
Software Engineer
MN MANO RD ONAP-UI-ML DEVOPS WRO 2 SG
Nokia
Contact number: +48691441316

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> on behalf of 
Xin Miao mailto:xin.m...@huawei.com>>
Sent: Saturday, August 4, 2018 6:43:56 PM
To: Ngueko, Gervais-Martial
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON; VENKATESH KUMAR, VIJAY
Subject: Re: [onap-discuss] [CLAMP][DCAE]RE: New Collector in Clamp


So  at runtime if I want to bring up new instance of control loop that would 
have the VES collector  receiving different event data and publish them on 
DMAAP with different topics from existing control loop, what I am going to do?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com<mailto:xin.m...@huawei.com>

 [cid:image001.jpg@01CD505D.C18C2420]



From: Ngueko, Gervais-Martial [mailto:gn4...@intl.att.com]
Sent: 2018年7月30日 PM 3:41
To: Xin Miao mailto:xin.m...@huawei.com>>
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON mailto:rshac...@research.att.com>>
Subject: [CLAMP][DCAE]RE: New Collector in Clamp



Hi,



Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE 
and used by all the mS and all control loops.

So the collector’s, currently, are not deployed via CLAMP and there is no 
cloudify blueprint available to do so anyway.

The collector box you see in CLAMP GUI is just a virtual box to show the 
control loop flow, in reality there is no configuration made by CLAMP for the 
collector(at least at this stage of ONAP, it might change in the future).



Br,

Martial



From: Xin Miao mailto:xin.m...@huawei.com>>
Sent: lundi 30 juillet 2018 21:14
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>
Subject: New Collector in Clamp



Hi, Gervias,



This is Xin Miao from Huawei and I am new to CLAMP.  Is there any code change 
to be done in CLAMP  to support  a new type of collector?  If not, what 
template or configuration files need to be created or updated to support it?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com<mailto:xin.m...@huawei.com>

 [cid:image001.jpg@01CD505D.C18C2420]




-=-=-=-=-=-=-=-=-=-=-=-
Links: You

Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-07 Thread Xin Miao
Thanks, Adam.

In my case, I am using an new type of collector, Restconf collector (going to 
be added into DCAE), and Holmes.

Thank you and best regards,

Xin Miao
American Network Technology Lab
Futurewei Technologies, Inc.
5340 Legacy Dr., Suite 175 Plano, TX 75024
Phone: 469-277-5884; Mobile:469-268-5226
xin.m...@huawei.com<mailto:xin.m...@huawei.com>
 [cid:image001.jpg@01CD505D.C18C2420]

From: Krysiak, Adam (Nokia - PL/Wroclaw) [mailto:adam.krys...@nokia.com]
Sent: 2018年8月7日 AM 8:40
To: Ngueko, Gervais-Martial ; onap-discuss@lists.onap.org; 
Xin Miao ; Sébastien Determe 
Cc: SHACHAM, RON ; VENKATESH KUMAR, VIJAY 

Subject: Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in 
Clamp


Hi Xin,



I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).
You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available.
It's your AT's responsibility to pull events from DMaaP. From Clamp perspective 
it's transparent what's the event type and topic.
Clamp will just send configuration parameters before deployment.
Unfortunately currently using own AT is not supported by Clamp.

Br,
Adam Krysiak
Software Engineer
MN MANO RD ONAP-UI-ML DEVOPS WRO 2 SG
Nokia
Contact number: +48691441316

From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 
mailto:onap-discuss@lists.onap.org>> on behalf of 
Xin Miao mailto:xin.m...@huawei.com>>
Sent: Saturday, August 4, 2018 6:43:56 PM
To: Ngueko, Gervais-Martial
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON; VENKATESH KUMAR, VIJAY
Subject: Re: [onap-discuss] [CLAMP][DCAE]RE: New Collector in Clamp


So  at runtime if I want to bring up new instance of control loop that would 
have the VES collector  receiving different event data and publish them on 
DMAAP with different topics from existing control loop, what I am going to do?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com<mailto:xin.m...@huawei.com>

 [cid:image001.jpg@01CD505D.C18C2420]



From: Ngueko, Gervais-Martial [mailto:gn4...@intl.att.com]
Sent: 2018年7月30日 PM 3:41
To: Xin Miao mailto:xin.m...@huawei.com>>
Cc: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>; SHACHAM, 
RON mailto:rshac...@research.att.com>>
Subject: [CLAMP][DCAE]RE: New Collector in Clamp



Hi,



Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE 
and used by all the mS and all control loops.

So the collector’s, currently, are not deployed via CLAMP and there is no 
cloudify blueprint available to do so anyway.

The collector box you see in CLAMP GUI is just a virtual box to show the 
control loop flow, in reality there is no configuration made by CLAMP for the 
collector(at least at this stage of ONAP, it might change in the future).



Br,

Martial



From: Xin Miao mailto:xin.m...@huawei.com>>
Sent: lundi 30 juillet 2018 21:14
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>
Subject: New Collector in Clamp



Hi, Gervias,



This is Xin Miao from Huawei and I am new to CLAMP.  Is there any code change 
to be done in CLAMP  to support  a new type of collector?  If not, what 
template or configuration files need to be created or updated to support it?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com<mailto:xin.m...@huawei.com>

 [cid:image001.jpg@01CD505D.C18C2420]




-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#11711): https://lists.onap.org/g/onap-discuss/message/11711
Mute This Topic: https://lists.onap.org/mt/24220548/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-



Re: [onap-discuss] [CLAMP][DCAE][control-loop]RE: New Collector in Clamp

2018-08-07 Thread Krysiak, Adam (Nokia - PL/Wroclaw)
Hi Xin,


I will try to answer your question, please someone correct me if I'm wrong.

Deploy of closed loop means that Clamp will send request to DCAE platform to 
start new instance of TCA (may be different tool but Clamp UI supports only TCA 
and Holmes).

You're writing that you want to receive different event data so I assume you're 
not interested in measurements.
It means you have to use other type of analytic tool (I will call it AT) then 
those already available.
It's your AT's responsibility to pull events from DMaaP. From Clamp perspective 
it's transparent what's the event type and topic.
Clamp will just send configuration parameters before deployment.
Unfortunately currently using own AT is not supported by Clamp.

Br,
Adam Krysiak
Software Engineer
MN MANO RD ONAP-UI-ML DEVOPS WRO 2 SG
Nokia
Contact number: +48691441316

From: onap-discuss@lists.onap.org  on behalf of 
Xin Miao 
Sent: Saturday, August 4, 2018 6:43:56 PM
To: Ngueko, Gervais-Martial
Cc: onap-discuss@lists.onap.org; SHACHAM, RON; VENKATESH KUMAR, VIJAY
Subject: Re: [onap-discuss] [CLAMP][DCAE]RE: New Collector in Clamp


So  at runtime if I want to bring up new instance of control loop that would 
have the VES collector  receiving different event data and publish them on 
DMAAP with different topics from existing control loop, what I am going to do?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com

 [cid:image001.jpg@01CD505D.C18C2420]



From: Ngueko, Gervais-Martial [mailto:gn4...@intl.att.com]
Sent: 2018年7月30日 PM 3:41
To: Xin Miao 
Cc: onap-discuss@lists.onap.org; SHACHAM, RON 
Subject: [CLAMP][DCAE]RE: New Collector in Clamp



Hi,



Currently collector’s are not deployed on-demand, they are pre-deployed in DCAE 
and used by all the mS and all control loops.

So the collector’s, currently, are not deployed via CLAMP and there is no 
cloudify blueprint available to do so anyway.

The collector box you see in CLAMP GUI is just a virtual box to show the 
control loop flow, in reality there is no configuration made by CLAMP for the 
collector(at least at this stage of ONAP, it might change in the future).



Br,

Martial



From: Xin Miao mailto:xin.m...@huawei.com>>
Sent: lundi 30 juillet 2018 21:14
To: Ngueko, Gervais-Martial mailto:gn4...@intl.att.com>>
Subject: New Collector in Clamp



Hi, Gervias,



This is Xin Miao from Huawei and I am new to CLAMP.  Is there any code change 
to be done in CLAMP  to support  a new type of collector?  If not, what 
template or configuration files need to be created or updated to support it?



Thank you and best regards,



Xin Miao

American Network Technology Lab

Futurewei Technologies, Inc.

5340 Legacy Dr., Suite 175 Plano, TX 75024

Phone: 469-277-5884; Mobile:469-268-5226

xin.m...@huawei.com

 [cid:image001.jpg@01CD505D.C18C2420]





-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#11710): https://lists.onap.org/g/onap-discuss/message/11710
Mute This Topic: https://lists.onap.org/mt/24220548/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-