Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
I have got a reproducible test case for this. It seems that SCSI layer returns DID_BUS_BUSY many times when 'conn error (1011)' is seen. for p in `ls /dev/sd*` do dd if=$p of=/dev/zero count=1 done wait # ./io-script 1+0 records in 1+0 records out 512 bytes (5.1 MB) copied, 0.177076 seconds, 28.9 MB/s dd: reading `/dev/sdaa8': Input/output error 2976+0 records in 2976+0 records out Dec 14 11:15:12 cdc-r710s3 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Dec 14 11:15:13 cdc-r710s3 kernel: connection2:0: detected conn error (1011) Dec 14 11:15:13 cdc-r710s3 iscsid: connection2:0 is operational after recovery (1 attempts) Dec 14 11:15:13 cdc-r710s3 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Dec 14 11:15:14 cdc-r710s3 kernel: connection1:0: detected conn error (1011) ... Dec 14 11:15:14 cdc-r710s3 kernel: sd 9:0:0:13: SCSI error: return code = 0x0002 == DID_BUS_BUSY Dec 14 11:15:14 cdc-r710s3 kernel: end_request: I/O error, dev sdaa, sector 2976 I am unable to upload ethereal on http://groups-beta.google.com/group/open-iscsi/files Regards, Anurag --- On Fri, 12/11/09, Anuarg Vora anurag_vo...@yahoo.com wrote: From: Anuarg Vora anurag_vo...@yahoo.com Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) To: open-iscsi@googlegroups.com Date: Friday, December 11, 2009, 12:22 AM Sorry, I do not see an upload option for me even after (signing-in). How to upload ? --- On Thu, 12/10/09, Mike Christie micha...@cs.wisc.edu wrote: From: Mike Christie micha...@cs.wisc.edu Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) To: open-iscsi@googlegroups.com Date: Thursday, December 10, 2009, 11:39 PM Anuarg Vora wrote: I did sent the ethereal trace yesterday. I am not sure why it didn't reach, is there any place I can upload it ? http://groups-beta.google.com/group/open-iscsi/files -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
Sorry, I do not see an upload option for me even after (signing-in). How to upload ? --- On Thu, 12/10/09, Mike Christie micha...@cs.wisc.edu wrote: From: Mike Christie micha...@cs.wisc.edu Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) To: open-iscsi@googlegroups.com Date: Thursday, December 10, 2009, 11:39 PM Anuarg Vora wrote: I did sent the ethereal trace yesterday. I am not sure why it didn't reach, is there any place I can upload it ? http://groups-beta.google.com/group/open-iscsi/files -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
RE: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
There is no CHAP configured on the array. --- On Thu, 12/10/09, berthiaume_wa...@emc.com berthiaume_wa...@emc.com wrote: From: berthiaume_wa...@emc.com berthiaume_wa...@emc.com Subject: RE: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) To: open-iscsi@googlegroups.com Date: Thursday, December 10, 2009, 7:29 AM Is CHAP configured on the array? -Original Message- From: open-iscsi@googlegroups.com [mailto:open-is...@googlegroups.com] On Behalf Of Mike Christie Sent: Wednesday, December 09, 2009 9:54 PM To: open-iscsi@googlegroups.com Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) avora wrote: I do not see ping/nop timeout message in the logs (probably that's why changing the noop timeouts did not work). Simply starting the session does not cause these errors. On starting the second session, I start a daemon that does SCSI commands like INQUIRY on all the paths. After that I see these messages, and the daemon gets stuck for a very long time waiting for SCSI commands to finish. At the backend I have EMC CLARiiON. # iscsiadm -m node -P 1 Target: iqn.1992-04.com.emc:cx.ckm00091100683.a2 Portal: 192.168.10.1:3260,1 Iface Name: iface0 Target: iqn.1992-04.com.emc:cx.ckm00091100683.b2 Portal: 192.168.12.1:3260,3 Iface Name: iface1 Does the same path always fail? If you log into one can you use it, then if you logout and log into the other does that other one then work? Is there any info the clarrion logs? -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011)
I did sent the ethereal trace yesterday. I am not sure why it didn't reach, is there any place I can upload it ? There is only 1 initiator. # iscsiadm -m session -P 1 Target: iqn.1992-04.com.emc:cx.ckm00091100683.a3 Current Portal: 192.168.11.1:3260,2 Persistent Portal: 192.168.11.1:3260,2 ** Interface: ** Iface Name: iface0 Iface Transport: tcp Iface Initiatorname: iqn.1996-04.de.suse:02:9914ca52960 Iface IPaddress: 192.168.11.11 Iface HWaddress: 00:15:17:A8:A9:1E Iface Netdev: eth0 SID: 10 iSCSI Connection State: TRANSPORT WAIT iSCSI Session State: FAILED Internal iscsid Session State: REPOEN Target: iqn.1992-04.com.emc:cx.ckm00091100683.b3 Current Portal: 192.168.13.1:3260,4 Persistent Portal: 192.168.13.1:3260,4 ** Interface: ** Iface Name: iface1 Iface Transport: tcp Iface Initiatorname: iqn.1996-04.de.suse:02:9914ca52960 Iface IPaddress: 192.168.13.11 Iface HWaddress: 00:15:17:A8:A9:1F Iface Netdev: eth1 SID: 11 iSCSI Connection State: TRANSPORT WAIT iSCSI Session State: FAILED Internal iscsid Session State: REPOEN --- On Thu, 12/10/09, Mike Christie micha...@cs.wisc.edu wrote: From: Mike Christie micha...@cs.wisc.edu Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) To: open-iscsi@googlegroups.com Date: Thursday, December 10, 2009, 11:22 PM avora wrote: Yes Mike, the recovery message is seen right away. Dec 7 18:42:06 cdc-r710s1 iscsid: connection2:0 is operational after recovery (1 attempts) 'conn error' and 'recovery' are seen one after the other, continuosly. Do you have other initiators connected to the target? Can you get me a wireshark trace? -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en. -- You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.