There is no CHAP configured on the array.
--- On Thu, 12/10/09, berthiaume_wa...@emc.com <berthiaume_wa...@emc.com> wrote: > From: berthiaume_wa...@emc.com <berthiaume_wa...@emc.com> > Subject: RE: SLES10 SP3 x86_64 - connection2:0: detected conn error (1011) > To: open-iscsi@googlegroups.com > Date: Thursday, December 10, 2009, 7:29 AM > Is CHAP configured on the array? > > -----Original Message----- > From: open-iscsi@googlegroups.com > [mailto:open-is...@googlegroups.com] > On Behalf Of Mike Christie > Sent: Wednesday, December 09, 2009 9:54 PM > To: open-iscsi@googlegroups.com > Subject: Re: SLES10 SP3 x86_64 - connection2:0: detected > conn error > (1011) > > avora wrote: > > I do not see ping/nop timeout message in the logs > > (probably that's why changing the noop timeouts did > not work). > > Simply starting the session does not cause these > errors. > > On starting the second session, I start a daemon > > that does SCSI commands like INQUIRY on all the > paths. > > After that I see these messages, and the daemon gets > stuck > > for a very long time waiting for SCSI commands to > finish. > > > > At the backend I have EMC CLARiiON. > > > > # iscsiadm -m node -P 1 > > Target: iqn.1992-04.com.emc:cx.ckm00091100683.a2 > > Portal: > 192.168.10.1:3260,1 > > > Iface Name: iface0 > > Target: iqn.1992-04.com.emc:cx.ckm00091100683.b2 > > Portal: > 192.168.12.1:3260,3 > > > Iface Name: iface1 > > > Does the same path always fail? > > If you log into one can you use it, then if you logout and > log into the > other does that other one then work? > > Is there any info the clarrion logs? > > -- > > You received this message because you are subscribed to the > Google > Groups "open-iscsi" group. > To post to this group, send email to open-is...@googlegroups.com. > To unsubscribe from this group, send email to > open-iscsi+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/open-iscsi?hl=en. > > > > -- > > You received this message because you are subscribed to the > Google Groups "open-iscsi" group. > To post to this group, send email to open-is...@googlegroups.com. > To unsubscribe from this group, send email to > open-iscsi+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/open-iscsi?hl=en. > > > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.