Re: [OE-core] [PATCH V2] connman: enable connman client
Hello all, So, what is the general agreement here? I placed connmanctl in the same package as connman because it is a very valuable tool, which should go in by default if connman is present also. It should not belong to connman-test, because it is used to control connman, not test it. If you want it to be in a connman-ctl package, just let me know and I will do the changes, re-test, and re-send the patch. Regards, Cristian -Original Message- From: openembedded-core-boun...@lists.openembedded.org [mailto:openembedded-core-boun...@lists.openembedded.org] On Behalf Of Jack Mitchell Sent: Tuesday, February 26, 2013 11:25 AM To: openembedded-core@lists.openembedded.org Subject: Re: [OE-core] [PATCH V2] connman: enable connman client On 25/02/13 23:53, Saul Wold wrote: On 02/25/2013 12:51 AM, Iorga, Cristian wrote: Changes from V1: - connman client is explicitly enabled - ${B} is used instead of ${S} (in this specific case are the same, it will be changed later on) Please add these to a proper commit message. Also, there was some discussion prior about putting the connmanctl in a separate package, that does not seem to have happened here. It could go into the -tools packages that already exists or it's own package connman-ctl? I know Jack M. mentioned looking into this also, so let's be sure to coordinate this. Yes, that was my suggestion. I'm blocked at the moment by a binutils failure I can't shift, so currently unable to contribute. I would suggest putting it in a new connman-client package which is a 2 minute change and test. Thanks Sau! I know Jack M. mentioned looking into this also, so let's be sure to coordinate this. -Original Message- From: Iorga, Cristian Sent: Monday, February 25, 2013 10:49 AM To: openembedded-core@lists.openembedded.org Cc: Iorga, Cristian Subject: [PATCH V2] connman: enable connman client connmanctl is now included when connman is installed Signed-off-by: Cristian Iorga cristian.io...@intel.com --- meta/recipes-connectivity/connman/connman.inc |5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/meta/recipes-connectivity/connman/connman.inc b/meta/recipes-connectivity/connman/connman.inc index b61e2af..b0ede60 100644 --- a/meta/recipes-connectivity/connman/connman.inc +++ b/meta/recipes-connectivity/connman/connman.inc @@ -20,7 +20,7 @@ DEPENDS = dbus glib-2.0 ppp iptables gnutls \ ${@base_contains('DISTRO_FEATURES', '3g','ofono', '', d)} \ -INC_PR = r17 +INC_PR = r18 TIST = --enable-tist TIST_powerpc = @@ -38,7 +38,7 @@ EXTRA_OECONF += \ --enable-tools \ --enable-test \ --disable-polkit \ ---disable-client \ +--enable-client \ --enable-fake \ ${@base_contains('DISTRO_FEATURES', 'systemd', '--with-systemdunitdir=${systemd_unitdir}/system/', '', d)} \ @@ -73,6 +73,7 @@ do_install_append() { install -d ${D}${bindir} install -m 0755 ${S}/tools/*-test ${D}${bindir} install -m 0755 ${S}/tools/wispr ${D}${bindir} +install -m 0755 ${B}/client/connmanctl ${D}${bindir} # We don't need to package an empty directory rmdir ${D}${libdir}/connman/scripts -- 1.7.10.4 ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core -- Jack Mitchell (j...@embed.me.uk) Embedded Systems Engineer http://www.embed.me.uk -- ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH V2] connman: enable connman client
On 26/02/13 10:38, Iorga, Cristian wrote: Hello all, So, what is the general agreement here? I placed connmanctl in the same package as connman because it is a very valuable tool, which should go in by default if connman is present also. It should not belong to connman-test, because it is used to control connman, not test it. If you want it to be in a connman-ctl package, just let me know and I will do the changes, re-test, and re-send the patch. I think it is best to be defined as a separate package connman-client within the current connman recipe. My reasoning for this is that connman is widely used as an embedded network manager and its main interface is dbus rather than the 'helper' program connmanctl. Regards, Cristian -Original Message- From: openembedded-core-boun...@lists.openembedded.org [mailto:openembedded-core-boun...@lists.openembedded.org] On Behalf Of Jack Mitchell Sent: Tuesday, February 26, 2013 11:25 AM To: openembedded-core@lists.openembedded.org Subject: Re: [OE-core] [PATCH V2] connman: enable connman client On 25/02/13 23:53, Saul Wold wrote: On 02/25/2013 12:51 AM, Iorga, Cristian wrote: Changes from V1: - connman client is explicitly enabled - ${B} is used instead of ${S} (in this specific case are the same, it will be changed later on) Please add these to a proper commit message. Also, there was some discussion prior about putting the connmanctl in a separate package, that does not seem to have happened here. It could go into the -tools packages that already exists or it's own package connman-ctl? I know Jack M. mentioned looking into this also, so let's be sure to coordinate this. Yes, that was my suggestion. I'm blocked at the moment by a binutils failure I can't shift, so currently unable to contribute. I would suggest putting it in a new connman-client package which is a 2 minute change and test. Thanks Sau! I know Jack M. mentioned looking into this also, so let's be sure to coordinate this. -Original Message- From: Iorga, Cristian Sent: Monday, February 25, 2013 10:49 AM To: openembedded-core@lists.openembedded.org Cc: Iorga, Cristian Subject: [PATCH V2] connman: enable connman client connmanctl is now included when connman is installed Signed-off-by: Cristian Iorga cristian.io...@intel.com --- meta/recipes-connectivity/connman/connman.inc |5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/meta/recipes-connectivity/connman/connman.inc b/meta/recipes-connectivity/connman/connman.inc index b61e2af..b0ede60 100644 --- a/meta/recipes-connectivity/connman/connman.inc +++ b/meta/recipes-connectivity/connman/connman.inc @@ -20,7 +20,7 @@ DEPENDS = dbus glib-2.0 ppp iptables gnutls \ ${@base_contains('DISTRO_FEATURES', '3g','ofono', '', d)} \ -INC_PR = r17 +INC_PR = r18 TIST = --enable-tist TIST_powerpc = @@ -38,7 +38,7 @@ EXTRA_OECONF += \ --enable-tools \ --enable-test \ --disable-polkit \ ---disable-client \ +--enable-client \ --enable-fake \ ${@base_contains('DISTRO_FEATURES', 'systemd', '--with-systemdunitdir=${systemd_unitdir}/system/', '', d)} \ @@ -73,6 +73,7 @@ do_install_append() { install -d ${D}${bindir} install -m 0755 ${S}/tools/*-test ${D}${bindir} install -m 0755 ${S}/tools/wispr ${D}${bindir} +install -m 0755 ${B}/client/connmanctl ${D}${bindir} # We don't need to package an empty directory rmdir ${D}${libdir}/connman/scripts -- 1.7.10.4 ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core -- Jack Mitchell (j...@embed.me.uk) Embedded Systems Engineer http://www.embed.me.uk -- ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH V2] connman: enable connman client
On 26 February 2013 11:10, Jack Mitchell m...@communistcode.co.uk wrote: I think it is best to be defined as a separate package connman-client within the current connman recipe. My reasoning for this is that connman is widely used as an embedded network manager and its main interface is dbus rather than the 'helper' program connmanctl. Cristian - in another commit can you also add connman-client to the tools-testapps image feature? Ross ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH V2] connman: enable connman client
On 02/26/2013 03:16 AM, Burton, Ross wrote: On 26 February 2013 11:10, Jack Mitchell m...@communistcode.co.uk wrote: I think it is best to be defined as a separate package connman-client within the current connman recipe. My reasoning for this is that connman is widely used as an embedded network manager and its main interface is dbus rather than the 'helper' program connmanctl. +1 to connman-client Cristian - in another commit can you also add connman-client to the tools-testapps image feature? +1 here also! Sau! Ross ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH V2] connman: enable connman client
Changes from V1: - connman client is explicitly enabled - ${B} is used instead of ${S} (in this specific case are the same, it will be changed later on) -Original Message- From: Iorga, Cristian Sent: Monday, February 25, 2013 10:49 AM To: openembedded-core@lists.openembedded.org Cc: Iorga, Cristian Subject: [PATCH V2] connman: enable connman client connmanctl is now included when connman is installed Signed-off-by: Cristian Iorga cristian.io...@intel.com --- meta/recipes-connectivity/connman/connman.inc |5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/meta/recipes-connectivity/connman/connman.inc b/meta/recipes-connectivity/connman/connman.inc index b61e2af..b0ede60 100644 --- a/meta/recipes-connectivity/connman/connman.inc +++ b/meta/recipes-connectivity/connman/connman.inc @@ -20,7 +20,7 @@ DEPENDS = dbus glib-2.0 ppp iptables gnutls \ ${@base_contains('DISTRO_FEATURES', '3g','ofono', '', d)} \ -INC_PR = r17 +INC_PR = r18 TIST = --enable-tist TIST_powerpc = @@ -38,7 +38,7 @@ EXTRA_OECONF += \ --enable-tools \ --enable-test \ --disable-polkit \ ---disable-client \ +--enable-client \ --enable-fake \ ${@base_contains('DISTRO_FEATURES', 'systemd', '--with-systemdunitdir=${systemd_unitdir}/system/', '', d)} \ @@ -73,6 +73,7 @@ do_install_append() { install -d ${D}${bindir} install -m 0755 ${S}/tools/*-test ${D}${bindir} install -m 0755 ${S}/tools/wispr ${D}${bindir} + install -m 0755 ${B}/client/connmanctl ${D}${bindir} # We don't need to package an empty directory rmdir ${D}${libdir}/connman/scripts -- 1.7.10.4 ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [OE-core] [PATCH V2] connman: enable connman client
On 02/25/2013 12:51 AM, Iorga, Cristian wrote: Changes from V1: - connman client is explicitly enabled - ${B} is used instead of ${S} (in this specific case are the same, it will be changed later on) Please add these to a proper commit message. Also, there was some discussion prior about putting the connmanctl in a separate package, that does not seem to have happened here. It could go into the -tools packages that already exists or it's own package connman-ctl? I know Jack M. mentioned looking into this also, so let's be sure to coordinate this. Thanks Sau! -Original Message- From: Iorga, Cristian Sent: Monday, February 25, 2013 10:49 AM To: openembedded-core@lists.openembedded.org Cc: Iorga, Cristian Subject: [PATCH V2] connman: enable connman client connmanctl is now included when connman is installed Signed-off-by: Cristian Iorga cristian.io...@intel.com --- meta/recipes-connectivity/connman/connman.inc |5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/meta/recipes-connectivity/connman/connman.inc b/meta/recipes-connectivity/connman/connman.inc index b61e2af..b0ede60 100644 --- a/meta/recipes-connectivity/connman/connman.inc +++ b/meta/recipes-connectivity/connman/connman.inc @@ -20,7 +20,7 @@ DEPENDS = dbus glib-2.0 ppp iptables gnutls \ ${@base_contains('DISTRO_FEATURES', '3g','ofono', '', d)} \ -INC_PR = r17 +INC_PR = r18 TIST = --enable-tist TIST_powerpc = @@ -38,7 +38,7 @@ EXTRA_OECONF += \ --enable-tools \ --enable-test \ --disable-polkit \ ---disable-client \ +--enable-client \ --enable-fake \ ${@base_contains('DISTRO_FEATURES', 'systemd', '--with-systemdunitdir=${systemd_unitdir}/system/', '', d)} \ @@ -73,6 +73,7 @@ do_install_append() { install -d ${D}${bindir} install -m 0755 ${S}/tools/*-test ${D}${bindir} install -m 0755 ${S}/tools/wispr ${D}${bindir} + install -m 0755 ${B}/client/connmanctl ${D}${bindir} # We don't need to package an empty directory rmdir ${D}${libdir}/connman/scripts -- 1.7.10.4 ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ___ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core