Re: [opensuse] 10.3 DVD is not booting

2007-10-07 Thread Mike McMullin
On Sun, 2007-10-07 at 18:35 +0300, Charalampos Alexopoulos wrote:
> Hi
> I download the openSUSE-10.3-GM-DVD-i386.iso and burn it with k3b under 
> opensuse 10.2, the k3b did the MD5 sum succesfully but the DVD is not 
> booting. I try it in two machines whle both machines can boot with 10.2 
> dvd.
> I also try to burn a new DVD with 10.3 in case that somethink goes wrong 
> with the first one (actualy now i have four copies of it but no one is 
> working).
> I also try to burn a new copy of 10.2 DVD to check if somethink is wrong 
> with k3b but this one is working. So the problem is with 
> openSUSE-10.3-GM-DVD-i386.iso.
> Right now i am in the midle of new download of the file, but it will 
> take a couple of days to finish.
> Any suggestions are welcome

  There are two fast possibilities, your bios is not set to boot from
that drive prior to booting from the hard disk, or you did not choose to
burn the disk as .iso.  From k3b's tools menu, choose the "Burn DVD Iso
image" option, for the former put in a known good bootable disk and
if it won't boot from it, adjust your bios settings.

-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



Re: [opensuse] 10.3 DVD is not booting

2007-10-07 Thread Rui Santos

Charalampos Alexopoulos wrote:
> Hi

Hi Charlampos,

> I download the openSUSE-10.3-GM-DVD-i386.iso and burn it with k3b under
> opensuse 10.2, the k3b did the MD5 sum succesfully but the DVD is not
> booting. I try it in two machines whle both machines can boot with 10.2
> dvd.

What do you mean by not booting?
- Does the BIOS boots the DVD ? do you get the openSUSE 10.3 boot options?
- Or select the install option and the boot process does not complete?


> I also try to burn a new DVD with 10.3 in case that somethink goes wrong
> with the first one (actualy now i have four copies of it but no one is
> working).
> I also try to burn a new copy of 10.2 DVD to check if somethink is wrong
> with k3b but this one is working. So the problem is with
> openSUSE-10.3-GM-DVD-i386.iso.
> Right now i am in the midle of new download of the file, but it will
> take a couple of days to finish.
> Any suggestions are welcome
> 
> Thank you in advance
> Charalampos Alexopoulos

-- 
Rui Santos
http://www.ruisantos.com/

Veni, vidi, Linux!
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



Re: [opensuse] 10.3 DVD is not booting

2007-10-07 Thread Charalampos Alexopoulos

Rui Santos wrote:


What do you mean by not booting?
- Does the BIOS boots the DVD ? do you get the openSUSE 10.3 boot 
options?

- Or select the install option and the boot process does not complete?


  
I mean that when i start the computer with dvd in the computer boot from 
hard disk, no boot options.

But when i put the dvd with the 10.2 it gives me the boot options.


Mike McMullin wrote:



  There are two fast possibilities, your bios is not set to boot from
that drive prior to booting from the hard disk, or you did not choose to
burn the disk as .iso.  From k3b's tools menu, choose the "Burn DVD Iso
image" option, for the former put in a known good bootable disk and
if it won't boot from it, adjust your bios settings.

  
No one is my case, because the computer can boot with 10.2 dvd and 
because i wrote the 10.2 dvd with the same procedure.


Thank you all for your replies
Charalampos Alexopoulos
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



Re: [opensuse] 10.3 DVD is not booting

2007-10-07 Thread Sunny
On 10/7/07, Charalampos Alexopoulos <[EMAIL PROTECTED]> wrote:
> I mean that when i start the computer with dvd in the computer boot from
> hard disk, no boot options.
> But when i put the dvd with the 10.2 it gives me the boot options.
>

Looks like a bad dvd. Check the md5 checksum of the iso you
downloaded, to be sure you have the right stuff. Then try to burn
again, maybe the media was bad.

Or, you can do:
dd if=/dev/dvd of=myimage.iso. This will try to read the whole media.
Then you can make a md5 checksum of myimage.iso and see if it is the
same.

Cheers

-- 
Svetoslav Milenov (Sunny)

Even the most advanced equipment in the hands of the ignorant is just
a pile of scrap.
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



Re: [opensuse] 10.3 DVD is not booting

2007-10-07 Thread Mike McMullin
On Sun, 2007-10-07 at 20:24 +0300, Charalampos Alexopoulos wrote:
> Rui Santos wrote:
> >
> > What do you mean by not booting?
> > - Does the BIOS boots the DVD ? do you get the openSUSE 10.3 boot 
> > options?
> > - Or select the install option and the boot process does not complete?
> >
> >
> >   
> I mean that when i start the computer with dvd in the computer boot from 
> hard disk, no boot options.
> But when i put the dvd with the 10.2 it gives me the boot options.
> 
> 
> Mike McMullin wrote:
> >
> >
> >   There are two fast possibilities, your bios is not set to boot from
> > that drive prior to booting from the hard disk, or you did not choose to
> > burn the disk as .iso.  From k3b's tools menu, choose the "Burn DVD Iso
> > image" option, for the former put in a known good bootable disk and
> > if it won't boot from it, adjust your bios settings.
> >
> >   
> No one is my case, because the computer can boot with 10.2 dvd and 
> because i wrote the 10.2 dvd with the same procedure.

  That leaves only one possibility that I can think of.  A defective
read on the DVD.

-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]