Re: [opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-06-15 Thread Freek de Kruijf 
Op woensdag 14 juni 2017 18:02:11 CEST schreef Matwey V. Kornilov:
> 12.04.2017 10:17, Matwey V. Kornilov пишет:
> > Hello,
> > 
> > Could somebody please tell me whether raspberrypi2 image supposed to
> > work on raspberrypi3 in armv7 mode?
> > 
> > I've just tried but I don't see anything on serial console, even u-boot
> > messages. Is it the image broken? I don't have raspberrypi2 to test.
> 
> openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2017.05.23-Build1.6.raw.xz
> also doesn't run on rpi3.
> 
> Issue here that I don't see anything on rs232 console and cannot find
> the reason. As far as I understand, u-boot 2017.05 should support both
> serial ports correctly.

I search for it, but could not find it anymore. Only the aarch64 version is 
available for RPi3. I am using that one. Tested 42.2 and Tumbleweed. Now using 
Tumbleweed. Still no support for bluetooth and WiFi.

-- 
fr.gr.

member openSUSE
Freek de Kruijf
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-06-14 Thread Matwey V. Kornilov 
12.04.2017 10:17, Matwey V. Kornilov пишет:
> Hello,
> 
> Could somebody please tell me whether raspberrypi2 image supposed to
> work on raspberrypi3 in armv7 mode?
> 
> I've just tried but I don't see anything on serial console, even u-boot
> messages. Is it the image broken? I don't have raspberrypi2 to test.
> 

openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2017.05.23-Build1.6.raw.xz
also doesn't run on rpi3.

Issue here that I don't see anything on rs232 console and cannot find
the reason. As far as I understand, u-boot 2017.05 should support both
serial ports correctly.

-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-20 Thread Matwey V. Kornilov 

12.04.2017 13:25, Dirk Müller пишет:

Hi Matwey,

2017-04-12 9:17 GMT+02:00 Matwey V. Kornilov :


Could somebody please tell me whether raspberrypi2 image supposed to work on
raspberrypi3 in armv7 mode?


It was the idea at some point, but that has never been implemented. so
no right now it will not work.



openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 with u-boot-rpi332b also doesn't 
work. What could be the reason?



Greetings,
Dirk




--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-14 Thread Matwey V. Kornilov 
14.04.2017 17:37, Andreas Färber пишет:
> Am 14.04.2017 um 12:17 schrieb Matwey V. Kornilov:
>>
>> 12.04.2017 11:44, Fabian Vogt пишет:
>>> Hi,
>>>
>>> as far as I can tell this is the usual issue with uboot that it really
>>> relies on a serial console.
>>>
>>> There is a patch on the u-boot mailing list that should fix this for
>>> the rpi2 u-boot on rpi3 HW case:
>>>
>>> https://patchwork.ozlabs.org/patch/746827/
>>
>> Unfortunately, It doesn't work for me...
> 
> Have you set skip-init as instructed in the commit message?
> 

It is enabled by default in bcm283x-uboot.dtsi

> Cheers,
> Andreas
> 


-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-14 Thread Andreas Färber 
Am 14.04.2017 um 12:17 schrieb Matwey V. Kornilov:
> 
> 12.04.2017 11:44, Fabian Vogt пишет:
>> Hi,
>>
>> as far as I can tell this is the usual issue with uboot that it really
>> relies on a serial console.
>>
>> There is a patch on the u-boot mailing list that should fix this for
>> the rpi2 u-boot on rpi3 HW case:
>>
>> https://patchwork.ozlabs.org/patch/746827/
> 
> Unfortunately, It doesn't work for me...

Have you set skip-init as instructed in the commit message?

Cheers,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-14 Thread Matwey V. Kornilov 


12.04.2017 11:44, Fabian Vogt пишет:

Hi,

as far as I can tell this is the usual issue with uboot that it really
relies on a serial console.

There is a patch on the u-boot mailing list that should fix this for
the rpi2 u-boot on rpi3 HW case:

https://patchwork.ozlabs.org/patch/746827/


Unfortunately, It doesn't work for me...



While it is not the main objective of the patch, as a side effect
it enables the uart autodetection for all RPi models, so it might
fix this case as well.

Cheers,
Fabian

Am Mittwoch, 12. April 2017, 10:30:31 CEST schrieb Alexander Graf:

Raspbian runs Linux straight away which then adapts to the respective
target board. U-Boot however does not; it statically compiles in which
target serial port to use.

I agree that this should probably be fixed :). Patches are more than
welcome!


Alex

On 12.04.17 10:23, Matwey V. Kornilov wrote:


Now it is clear, thank you. I though that the same raspbian image fitted
all RPI versions so JeOS did also.


12.04.2017 11:12, Alexander Graf пишет:

Hi,

I don't think it would work, as the serial port is behind a different
IP block.

Alex


Am 12.04.2017 um 09:17 schrieb Matwey V. Kornilov
:

Hello,

Could somebody please tell me whether raspberrypi2 image supposed to
work on raspberrypi3 in armv7 mode?

I've just tried but I don't see anything on serial console, even
u-boot messages. Is it the image broken? I don't have raspberrypi2 to
test.

--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org














--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-12 Thread Fabian Vogt 
Hi,

as far as I can tell this is the usual issue with uboot that it really
relies on a serial console.

There is a patch on the u-boot mailing list that should fix this for
the rpi2 u-boot on rpi3 HW case:

https://patchwork.ozlabs.org/patch/746827/

While it is not the main objective of the patch, as a side effect
it enables the uart autodetection for all RPi models, so it might
fix this case as well.

Cheers,
Fabian

Am Mittwoch, 12. April 2017, 10:30:31 CEST schrieb Alexander Graf:
> Raspbian runs Linux straight away which then adapts to the respective 
> target board. U-Boot however does not; it statically compiles in which 
> target serial port to use.
> 
> I agree that this should probably be fixed :). Patches are more than 
> welcome!
> 
> 
> Alex
> 
> On 12.04.17 10:23, Matwey V. Kornilov wrote:
> >
> > Now it is clear, thank you. I though that the same raspbian image fitted
> > all RPI versions so JeOS did also.
> >
> >
> > 12.04.2017 11:12, Alexander Graf пишет:
> >> Hi,
> >>
> >> I don't think it would work, as the serial port is behind a different
> >> IP block.
> >>
> >> Alex
> >>
> >>> Am 12.04.2017 um 09:17 schrieb Matwey V. Kornilov
> >>> :
> >>>
> >>> Hello,
> >>>
> >>> Could somebody please tell me whether raspberrypi2 image supposed to
> >>> work on raspberrypi3 in armv7 mode?
> >>>
> >>> I've just tried but I don't see anything on serial console, even
> >>> u-boot messages. Is it the image broken? I don't have raspberrypi2 to
> >>> test.
> >>>
> >>> --
> >>> To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> >>> To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
> >>>
> >>
> >
> >
> 


--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3

2017-04-12 Thread Alexander Graf 
Raspbian runs Linux straight away which then adapts to the respective 
target board. U-Boot however does not; it statically compiles in which 
target serial port to use.


I agree that this should probably be fixed :). Patches are more than 
welcome!



Alex

On 12.04.17 10:23, Matwey V. Kornilov wrote:


Now it is clear, thank you. I though that the same raspbian image fitted
all RPI versions so JeOS did also.


12.04.2017 11:12, Alexander Graf пишет:

Hi,

I don't think it would work, as the serial port is behind a different
IP block.

Alex


Am 12.04.2017 um 09:17 schrieb Matwey V. Kornilov
:

Hello,

Could somebody please tell me whether raspberrypi2 image supposed to
work on raspberrypi3 in armv7 mode?

I've just tried but I don't see anything on serial console, even
u-boot messages. Is it the image broken? I don't have raspberrypi2 to
test.

--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org







--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org