Re: [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)

2016-03-24 Thread Pfeuffer, Dieter 
Hi Michael,

thanks for your suggestion.
I wasn't aware of this possibility. I will change it in the next version of the 
patch series.

Regards,
Dieter 


-Ursprüngliche Nachricht-
Von: Michael Heimpold [mailto:m...@heimpold.de] 
Gesendet: Mittwoch, 23. März 2016 20:57
An: Pfeuffer, Dieter <dieter.pfeuf...@men.de>
Cc: openwrt-devel@lists.openwrt.org
Betreff: Re: [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for 
fw_(printenv/setenv)

Hi,

Am Wednesday 23 March 2016, 13:17:32 schrieb Dieter Pfeuffer:
> Signed-off-by: Dieter Pfeuffer <dieter.pfeuf...@men.de>
> ---
>  target/linux/mpc85xx/base-files/etc/fw_env.config | 22
> ++ 1 file changed, 22 insertions(+)
>  create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config
> 
> diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config
> b/target/linux/mpc85xx/base-files/etc/fw_env.config new file mode 
> 100644 index 000..1780f22
> --- /dev/null
> +++ b/target/linux/mpc85xx/base-files/etc/fw_env.config
> @@ -0,0 +1,22 @@
> +# Configuration file for fw_(printenv/setenv) utility.
> +# Up to two entries are valid, in this case the redundant # 
> +environment sector is assumed present.
> +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash. +# Futhermore, if the Flash sector size is ommitted, 
> this value is assumed to +# be the same as the Environment size, which 
> is valid for NOR and SPI-dataflash +
> +# NOR example
> +# MTD device nameDevice offset   Env. size   Flash sector size   
> Number of
> sectors
> +/dev/mtd10x  0x2000  0x2000

I think it would be better to make use of ubootenv_add_uci_config and
the other infrastructure and create a new file in
package/boot/uboot-envtools/files

Regards,
mhei

> +#/dev/mtd2   0x  0x4000  0x4000
> +
> +# MTD SPI-dataflash example
> +# MTD device nameDevice offset   Env. size   Flash sector size   
> Number of
> sectors +#/dev/mtd5   0x4200  0x4200
> +#/dev/mtd6   0x4200  0x4200
> +
> +# NAND example
> +#/dev/mtd0   0x4000  0x4000  0x2 
> 2
> +
> +# Block device example
> +#/dev/mmcblk00xc 0x2
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Re: [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)

2016-03-23 Thread Michael Heimpold 
Hi,

Am Wednesday 23 March 2016, 13:17:32 schrieb Dieter Pfeuffer:
> Signed-off-by: Dieter Pfeuffer 
> ---
>  target/linux/mpc85xx/base-files/etc/fw_env.config | 22
> ++ 1 file changed, 22 insertions(+)
>  create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config
> 
> diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config
> b/target/linux/mpc85xx/base-files/etc/fw_env.config new file mode 100644
> index 000..1780f22
> --- /dev/null
> +++ b/target/linux/mpc85xx/base-files/etc/fw_env.config
> @@ -0,0 +1,22 @@
> +# Configuration file for fw_(printenv/setenv) utility.
> +# Up to two entries are valid, in this case the redundant
> +# environment sector is assumed present.
> +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash. +# Futhermore, if the Flash sector size is ommitted, this
> value is assumed to +# be the same as the Environment size, which is valid
> for NOR and SPI-dataflash +
> +# NOR example
> +# MTD device nameDevice offset   Env. size   Flash sector size   
> Number of
> sectors 
> +/dev/mtd10x  0x2000  0x2000

I think it would be better to make use of ubootenv_add_uci_config and
the other infrastructure and create a new file in
package/boot/uboot-envtools/files

Regards,
mhei

> +#/dev/mtd2   0x  0x4000  0x4000
> +
> +# MTD SPI-dataflash example
> +# MTD device nameDevice offset   Env. size   Flash sector size   
> Number of
> sectors +#/dev/mtd5   0x4200  0x4200
> +#/dev/mtd6   0x4200  0x4200
> +
> +# NAND example
> +#/dev/mtd0   0x4000  0x4000  0x2 
> 2
> +
> +# Block device example
> +#/dev/mmcblk00xc 0x2
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

[OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)

2016-03-23 Thread Dieter Pfeuffer 
Signed-off-by: Dieter Pfeuffer 
---
 target/linux/mpc85xx/base-files/etc/fw_env.config | 22 ++
 1 file changed, 22 insertions(+)
 create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config

diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config 
b/target/linux/mpc85xx/base-files/etc/fw_env.config
new file mode 100644
index 000..1780f22
--- /dev/null
+++ b/target/linux/mpc85xx/base-files/etc/fw_env.config
@@ -0,0 +1,22 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and 
SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name  Device offset   Env. size   Flash sector size   
Number of sectors
+/dev/mtd1  0x  0x2000  0x2000
+#/dev/mtd2 0x  0x4000  0x4000
+
+# MTD SPI-dataflash example
+# MTD device name  Device offset   Env. size   Flash sector size   
Number of sectors
+#/dev/mtd5 0x4200  0x4200
+#/dev/mtd6 0x4200  0x4200
+
+# NAND example
+#/dev/mtd0 0x4000  0x4000  0x2 
2
+
+# Block device example
+#/dev/mmcblk0  0xc 0x2
-- 
1.9.1
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel