Re: Unable to do on-device debugging on E2 with USB
I just got mine to work. Followed the instructions at http://palmos.combee.net/blog/USBDebuggingandtheTreo650.html and it worked just like that! Good Luck Lionscribe -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
re: Unable to do on-device debugging on E2 with USB
Harry wrote: >I checked the archive again and found the following - I remember >that having being critical when I did USB debugging for the first >time: >>Update the Codewarror version to 9.3. >>Go to Codewarrior website, First get 9.2 patch, update that >>first, then get 9.3 version update patch and Update your >>codewarrior to 9.3 then start your Debugging. >>It will work. >>[Note: Before update 9.3 ver. patch, You should update with >>9.2 patch] I do have CW 9.3. I applied these patches long ago, likely in the 2-step process you describe as I think this is how it was supposed to be done anyway. But that still doesn't work :( Luc Le Blanc -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
re: Unable to do on-device debugging on E2 with USB
Luc, regarding the soft reset: I tried on my config and seems the reset is not necessary to get the connection to work. However, I always have the check box on in DotDot2 for automatic console mode after soft resets. I checked the archive again and found the following - I remember that having being critical when I did USB debugging for the first time: >Update the Codewarror version to 9.3. >Go to Codewarrior website, First get 9.2 patch, update that >first, then get 9.3 version update patch and Update your >codewarrior to 9.3 then start your Debugging. >It will work. >[Note: Before update 9.3 ver. patch, You should update with >9.2 patch] Another question: can debug on other devices, say a Tungsten-E/T5/TX or a Treo? Harry -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
re: Unable to do on-device debugging on E2 with USB
Harry wrote: > And just to make sure, here is the sequence I try to abide by: > 1. Launch CW > 2. switch on device with USB connected to PC > 3. launch DotDot2 on the device and do a soft reset The console mode is detected on the PC as it beeps when I start it. But why do a soft reset? Aren't you stopping the console mode right after starting it??? > 4. launch the debugger on CW I still get the "Connection attempt failed. Please try again." error alert immediately after I acknowledge the console mode prompt alert :( I don't have a Sony directory, but I copied the USBPort.dll file into CW's bin directory. Luc Le Blanc -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
re: Unable to do on-device debugging on E2 with USB
Hi Luc, sorry to hear it still isn't working. So I checked again on my machine. Did I say, you should have only 1 copy of USBPort.dll on your machine. I actually have 3 (ahem ;-) ) C:\Programme\Metrowerks\CodeWarrior\Bin\USBPort.dll C:\Programme\palmOne\USBPort.dll C:\Programme\Sony Handheld\USBPort.dll And than there is a link to Ben's old site. I remember it helped me in getting my USB debugging going: http://www.palmoswerks.com/discuss/msgReader$146 And just to make sure, here is the sequence I try to abide by: 1. Launch CW 2. switch on device with USB connected to PC 3. launch DotDot2 on the device and do a soft reset 4. launch the debugger on CW Hotsysnc_mgr is running when i debug - it does not affect the connection. Try again and keep me posted about your results - if it's working on my machines we WILL get it working on yours as well! Harry -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
Re: Unable to do on-device debugging on E2 with USB
Same problem here trying to connect to my Treo. Lionscribe -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
