Have Downloaded "Switch"..Now What?
Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
The easiest way I know to do this is highlight the file you want to switch. Go into applications and down to convert with switch I think it is. You can tell it to put the converted file in the same directory as the one you are working on or tell it a different one I think. On 6/24/2010 9:23 PM, Tom Kaufman wrote: Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
I thought I had it! I did what you said..only this time, I hit my "F3" key. Darn it..I still (as far as I can tell)..have no MP3 file!" Not only that, I see nothing indicating anything about changing bit rate, stereo..nothing like that! Guess I need further instructions! Sorry! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message ----- From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman ----- Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
RE: Have Downloaded "Switch"..Now What?
Another ghing. Can Switch remove drm restrictions from wma files? Andre -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom Kaufman Sent: 25 June 2010 06:53 AM To: PC Audio Discussion List Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? > High Tom, > When you brought up Switch, When you tab over, you should have saw > something that says, output folder combo box: my documents, 1 of 5, > alt plus I. > And as for the inner workings of the file, if you tab over to that > area, it will say, "encoder options." > Right there is where the stereo joint stereo and force stereo options are. > Also, tabbing over just once more will get you to the bit rate settings. > Hope this helps. > My best regards. > John. > - Original Message - > From: "Tom Kaufman" > To: "PC Audio Discussion List" > Sent: Thursday, June 24, 2010 11:09 PM > Subject: Re: Have Downloaded "Switch"..Now What? > > >> Hi John and list: Well..I thought I had done something like you said >> (is the file actually supposed to play?)..anyhow..I cannot figure >> where it's putting the file! But will read through these >> instructions..and give it another shot! But right now..I'm just not >> understanding..will my file have the same name..only with the ".MP3" >> extension? Please forgive me if I'm just not understanding all of this very well! >> Tom Kaufman >> - Original Message - >> From: "DJ DOCTOR P" >> To: "PC Audio Discussion List" >> Sent: Thursday, June 24, 2010 10:58 PM >> Subject: Re: Have Downloaded "Switch"..Now What? >> >> >>> High Tom, >>> Highlight the file by having the curser pointing at it. >>> Go in to your file menu and scroll down to Switch. >>> Tab over to where it says file options or something rather like that. >>> Hit the space bar. >>> You will see a list of file types. >>> If the default file isn't .mp3, then scroll up or down until you get >>> to that one. >>> It also gives you the option to set the bit rate and stereo joint >>> stereo or force stereo. >>> After you have done this, then tab over to ok, hit the space bar. >>> then tab over to the convert button and hit the space bar again. >>> At this point, Switch will start converting the file to .mp3. >>> But now that Switch is sat to convert files to .mp3, you can follow >>> the steps above. >>> But only, you will hit the F3 key to start Switch to converting >>> files to .mp3. >>> Hope this helps. >>> My best regards. >>> John. >>> - Original Message - >>> From: "Tom Kaufman" >>> To: "PC audio discussion list. " >>> Sent: Thursday, June 24, 2010 10:23 PM >>> Subject: Have Downloaded "Switch"..Now What? >>> >>> >>>> Hello list: Hopefully I don't sound too ignorant..but I've >>>> downloaded "Switch"..but so far..have no idea as to how it works! >>>> So if some of you could get me pointed in the right >>>> direction..would be much appreciated! For instance..I have a couple >>>> of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? >>>> Tom Kaufman >>>> To unsubscribe from this list, send a blank email to: >>>> pc-audio-unsubscr...@pc-audio.org >>> >>> >>> To unsubscribe from this list, send a blank email to: >>> pc-audio-unsubscr...@pc-audio.org >> >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message ----- From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe
Re: Have Downloaded "Switch"..Now What?
No, Switch can't do that. I use Sound Taxi for that. -- Christopher chalt...@gmail.com On 6/25/2010 10:11 AM, André van Deventer wrote: Another ghing. Can Switch remove drm restrictions from wma files? Andre -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom Kaufman Sent: 25 June 2010 06:53 AM To: PC Audio Discussion List Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman ----- Original Message ----- From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right direction..would be much appreciated! For instance..I have a couple of these files that I've mentioned earlier that I need to convert to MP3s; so how is this done? Tom Kaufman To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: Have Downloaded "Switch"..Now What?
High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the steps above. But only, you will hit the F3 key to start Switch to converting files to .mp3. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC audio discussion list. " Sent: Thursday, June 24, 2010 10:23 PM Subject: Have Downloaded "Switch"..Now What? Hello list: Hopefully I don't sound too ignorant..but I've downloaded "Switch"..but so far..have no idea as to how it works! So if some of you could get me pointed in the right dire
Re: Have Downloaded "Switch"..Now What?
Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options or something rather like that. Hit the space bar. You will see a list of file types. If the default file isn't .mp3, then scroll up or down until you get to that one. It also gives you the option to set the bit rate and stereo joint stereo or force stereo. After you have done this, then tab over to ok, hit the space bar. then tab over to the convert button and hit the space bar again. At this point, Switch will start converting the file to .mp3. But now that Switch is sat to convert files to .mp3, you can follow the s
Re: Have Downloaded "Switch"..Now What?
Perhaps it is something I am doing wrong; however, I too am having problems with the most recent version of Switch. Specifically, often the file which I wish to convert begins to play, and I can't figure out why. I had great results from prior versions of Switch. Don Roberts - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 10:07 AM Subject: Re: Have Downloaded "Switch"..Now What? Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? > High Tom, > In most cases, the space bar always works. > If that doesn't work, please let me know, and I will try and help > you > figure it out. > My best regards. > John. > - Original Message - > From: "Tom Kaufman" > To: "PC Audio Discussion List" > Sent: Friday, June 25, 2010 11:13 AM > Subject: Re: Have Downloaded "Switch"..Now What? > > >> Hey John and list: Yeah..that makes sense to me! Now if you've >> seen my >> latest post on this "Switch" thing..then you know that I've >> discovered >> that, for some reason, none of the buttons are working..and I don't >> know >> what I've done to cause this! I'm fine..so long as I don't want to >> change something (I mostly wanted to convert a couple of these M4a >> files >> to MP3s)..but now..if I decide I want to change the bit rate..no >> soap! >> For nothing will click (can hit that ole "enter" key all I please; >> it >> does nothing! >> Tom Kaufman >> - Original Message - >> From: "DJ DOCTOR P" >> To: "PC Audio Discussion List" >> Sent: Friday, June 25, 2010 11:02 AM >> Subject: Re: Have Downloaded "Switch"..Now What? >> >> >>> High Tom, >>> When you first bring up Switch, tab over to where it says, "browse >>> button." >>> After you get there, hit either the space bar or the inter key. >>> After that, it will allow you to place the files in wherever >>> folder in >>> any place on your computer. >>> After you've selected the folder you want the files to go in to, >>> just >>> tab over to the ok button and hit either the space bar or the >>> inter key >>> and then tab over to the convert button and hit the space bar on >>> it. >>> Now, Switch will convert the files and save them in to that >>> folder. >>> Hope this helps. >>> My best regards. >>> John. >>> - Original Message - >>> From: "Tom Kaufman" >>> To: "PC Audio Discussion List" >>> Sent: Friday, June 25, 2010 12:53 AM >>> Subject: Re: Have Downloaded "Switch"..Now What? >>> >>> >>>> Hey John: Thanks for the instructions..I actually _did_ find >>>> that file >>>> (I just wasn't sure where to look)..now here's another one for >>>> ya: >>>> let's say you want to put a file that it's converted into a >>>> particular >>>> place; how is this done? >>>> Tom Kaufman >>>> - Original Message - >>>> From: "DJ DOCTOR P" >>>> To: "PC Audio Discussion List" >>>> Sent: Thursday, June 24, 2010 11:37 PM >>>> Subject: Re: Have Downloaded "Switch"..Now What? >>>> >>>> >>>>> High Tom, >>>>> When you brought up Switch, When you tab over, you should have >>>>> saw >>>>> something that says, output folder combo box: my documents, 1 of >>>>> 5, >>>>> alt plus I. >>>>> And as for the inner workings of the file, if you tab over to >>>>> that >>>>> area, it will say, "encoder options." >>>>> Right there is where the stereo joint stereo and force stereo >>>>> options >>>>> are. >>>>> Also, tabbing over just once more will get you to the bit rate >>>>> s
Re: Have Downloaded "Switch"..Now What?
Hello Donald and list: Hmmm! Funny you should mention that thing about the file playing (I noticed that too)..I just figured that this was the way it was supposed to work! As I pointed out earlier..when I first set up the program, all seemed to work as it's supposed to; now..either hitting the space bar or the enter key does nothing! The "F3" key does work..but that's all I can do right now! CI don't know that I have anything that needs converting..but in case I do, would like to know that I can use this program with confidence that it's going to do what it's supposed to; if not..then it's going "bye bye!" Tom Kaufman - Original Message - From: "Donald L. Roberts" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 1:53 PM Subject: Re: Have Downloaded "Switch"..Now What? Perhaps it is something I am doing wrong; however, I too am having problems with the most recent version of Switch. Specifically, often the file which I wish to convert begins to play, and I can't figure out why. I had great results from prior versions of Switch. Don Roberts - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 10:07 AM Subject: Re: Have Downloaded "Switch"..Now What? Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman ----- Original Message ----- From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. ----- Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now Wh
RE: Have Downloaded "Switch"..Now What?
I noticed this with one of the more recent versions of Switch. I get around it by using the JAWS cursor to click on the right button or the programs different hot keys. -- Christopher chalt...@gmail.com -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom Kaufman Sent: Saturday, June 26, 2010 1:12 PM To: PC Audio Discussion List Subject: Re: Have Downloaded "Switch"..Now What? Hello Donald and list: Hmmm! Funny you should mention that thing about the file playing (I noticed that too)..I just figured that this was the way it was supposed to work! As I pointed out earlier..when I first set up the program, all seemed to work as it's supposed to; now..either hitting the space bar or the enter key does nothing! The "F3" key does work..but that's all I can do right now! CI don't know that I have anything that needs converting..but in case I do, would like to know that I can use this program with confidence that it's going to do what it's supposed to; if not..then it's going "bye bye!" Tom Kaufman - Original Message - From: "Donald L. Roberts" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 1:53 PM Subject: Re: Have Downloaded "Switch"..Now What? > Perhaps it is something I am doing wrong; however, I too am having > problems with the most recent version of Switch. Specifically, often > the file which I wish to convert begins to play, and I can't figure > out why. I had great results from prior versions of Switch. > > Don Roberts > > > > - Original Message - > From: "Tom Kaufman" > To: "PC Audio Discussion List" > Sent: Saturday, June 26, 2010 10:07 AM > Subject: Re: Have Downloaded "Switch"..Now What? > > > Hello John and list: Pressing the space bar (at least the last time I > was > there)..did nothing! Haven't had a chance to do much with it lately; > my > main concern is if I need to make a change..let's say I need to change > the > bit rate or something like that..I hope I haven't done something to > cause > this problem! > Tom Kaufman > - Original Message - > From: "DJ DOCTOR P" > To: "PC Audio Discussion List" > Sent: Friday, June 25, 2010 7:48 PM > Subject: Re: Have Downloaded "Switch"..Now What? > > >> High Tom, >> In most cases, the space bar always works. >> If that doesn't work, please let me know, and I will try and help >> you >> figure it out. >> My best regards. >> John. >> - Original Message - >> From: "Tom Kaufman" >> To: "PC Audio Discussion List" >> Sent: Friday, June 25, 2010 11:13 AM >> Subject: Re: Have Downloaded "Switch"..Now What? >> >> >>> Hey John and list: Yeah..that makes sense to me! Now if you've >>> seen my >>> latest post on this "Switch" thing..then you know that I've >>> discovered >>> that, for some reason, none of the buttons are working..and I don't >>> know >>> what I've done to cause this! I'm fine..so long as I don't want to >>> change something (I mostly wanted to convert a couple of these M4a >>> files >>> to MP3s)..but now..if I decide I want to change the bit rate..no >>> soap! >>> For nothing will click (can hit that ole "enter" key all I please; >>> it >>> does nothing! >>> Tom Kaufman >>> - Original Message - >>> From: "DJ DOCTOR P" >>> To: "PC Audio Discussion List" >>> Sent: Friday, June 25, 2010 11:02 AM >>> Subject: Re: Have Downloaded "Switch"..Now What? >>> >>> >>>> High Tom, >>>> When you first bring up Switch, tab over to where it says, "browse >>>> button." >>>> After you get there, hit either the space bar or the inter key. >>>> After that, it will allow you to place the files in wherever >>>> folder in >>>> any place on your computer. >>>> After you've selected the folder you want the files to go in to, >>>> just >>>> tab over to the ok button and hit either the space bar or the >>>> inter key >>>> and then tab over to the convert button and hit the space bar on >>>> it. >>>> Now, Switch will convert the files and save them in to that >>>> folder. >>>> Hope this helps. >>>> My best regards. >>>> John. >>>
Re: Have Downloaded "Switch"..Now What?
Hello Tom, Did you save a back up copy of the software on your computer? If you did, you may have to uninstall and reinstall the software in order to fix the problem. Try doing that and see if it helps things for you. If you need anymore help, please let me know, and I'll see what I can do for you. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 1:07 PM Subject: Re: Have Downloaded "Switch"..Now What? Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman ----- Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not understanding..will my file have the same name..only with the ".MP3" extension? Please forgive me if I'm just not understanding all of this very well! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 10:58 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, Highlight the file by having the curser pointing at it. Go in to your file menu and scroll down to Switch. Tab over to where it says file options
Re: Have Downloaded "Switch"..Now What?
Yup..saved the "set-up" thingy; so may try that again! As has been mentioned, I can get around some of it by using some keystrokes I found while going through the menus! However..didn't find any keystrokes to do anything with changing bit rate! Thanks for the suggestion; may give that a try! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 3:15 PM Subject: Re: Have Downloaded "Switch"..Now What? Hello Tom, Did you save a back up copy of the software on your computer? If you did, you may have to uninstall and reinstall the software in order to fix the problem. Try doing that and see if it helps things for you. If you need anymore help, please let me know, and I'll see what I can do for you. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 1:07 PM Subject: Re: Have Downloaded "Switch"..Now What? Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Hi John and list: Well..I thought I had done something like you said (is the file actually supposed to play?)..anyhow..I cannot figure where it's putting the file! But will read through these instructions..and give it another shot! But right now..I'm just not unders
Re: Have Downloaded "Switch"..Now What?
High Tom, If you still can't get the new version of Switch to work, I can send you the older version of it that I have. Please keep us posted! My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 4:09 PM Subject: Re: Have Downloaded "Switch"..Now What? Yup..saved the "set-up" thingy; so may try that again! As has been mentioned, I can get around some of it by using some keystrokes I found while going through the menus! However..didn't find any keystrokes to do anything with changing bit rate! Thanks for the suggestion; may give that a try! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 3:15 PM Subject: Re: Have Downloaded "Switch"..Now What? Hello Tom, Did you save a back up copy of the software on your computer? If you did, you may have to uninstall and reinstall the software in order to fix the problem. Try doing that and see if it helps things for you. If you need anymore help, please let me know, and I'll see what I can do for you. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Saturday, June 26, 2010 1:07 PM Subject: Re: Have Downloaded "Switch"..Now What? Hello John and list: Pressing the space bar (at least the last time I was there)..did nothing! Haven't had a chance to do much with it lately; my main concern is if I need to make a change..let's say I need to change the bit rate or something like that..I hope I haven't done something to cause this problem! Tom Kaufman ----- Original Message ----- From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 7:48 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, In most cases, the space bar always works. If that doesn't work, please let me know, and I will try and help you figure it out. My best regards. John. ----- Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:13 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John and list: Yeah..that makes sense to me! Now if you've seen my latest post on this "Switch" thing..then you know that I've discovered that, for some reason, none of the buttons are working..and I don't know what I've done to cause this! I'm fine..so long as I don't want to change something (I mostly wanted to convert a couple of these M4a files to MP3s)..but now..if I decide I want to change the bit rate..no soap! For nothing will click (can hit that ole "enter" key all I please; it does nothing! Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 11:02 AM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you first bring up Switch, tab over to where it says, "browse button." After you get there, hit either the space bar or the inter key. After that, it will allow you to place the files in wherever folder in any place on your computer. After you've selected the folder you want the files to go in to, just tab over to the ok button and hit either the space bar or the inter key and then tab over to the convert button and hit the space bar on it. Now, Switch will convert the files and save them in to that folder. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Friday, June 25, 2010 12:53 AM Subject: Re: Have Downloaded "Switch"..Now What? Hey John: Thanks for the instructions..I actually _did_ find that file (I just wasn't sure where to look)..now here's another one for ya: let's say you want to put a file that it's converted into a particular place; how is this done? Tom Kaufman - Original Message - From: "DJ DOCTOR P" To: "PC Audio Discussion List" Sent: Thursday, June 24, 2010 11:37 PM Subject: Re: Have Downloaded "Switch"..Now What? High Tom, When you brought up Switch, When you tab over, you should have saw something that says, output folder combo box: my documents, 1 of 5, alt plus I. And as for the inner workings of the file, if you tab over to that area, it will say, "encoder options." Right there is where the stereo joint stereo and force stereo options are. Also, tabbing over just once more will get you to the bit rate settings. Hope this helps. My best regards. John. - Original Message - From: "Tom Kaufman" To: "PC Audio Discussion List" Sent: Thu