Re: [PD] pduino digital read problems
would be nice to have the info about the port setting somewhere - either in the test or in the help - somehow it changes your layout of the arduino-test.pd. i've attached a basic variation ø Hans-Christoph Steiner wrote: I'm not sure what you mean, but Patches welcome! :-D .hc On Nov 19, 2009, at 1:44 PM, olsen wrote: wouldn't it be nice to have the info in the brackets somewhere in the arduino-help? Hans-Christoph Steiner wrote: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list -- ETs DNA will not be televised "It is convenient to imagine a power beyond us because that means we don't have to examine our own lives.", from "The Idols of Environmentalism", by Curtis White -- ETs DNA will not be televised #N canvas 523 105 765 519 10; #X obj 313 116 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577 0; #X obj 23 145 cnv 15 85 22 empty empty empty 20 12 0 14 -253938 -66577 0; #X obj 155 170 cnv 15 60 22 empty empty empty 20 12 0 14 -253938 -66577 0; #X msg 161 172 open 2; #N canvas 128 22 525 433 serin 0; #X obj 180 61 cnv 15 15 15 empty \$0-number-canvas 2 4 8 0 14 -233017 -1 0; #X obj 200 225 s \$0-number-canvas; #X obj 60 61 hradio 15 1 1 8 empty empty empty 0 -6 0 8 -225271 -1 -1 2; #X obj 60 13 inlet; #X msg 200 202 label \$1; #X obj 200 180 makefilename %d; #X obj 59 108 int; #X msg 59 206 open \$1; #X obj 59 377 outlet; #X msg 201 306 set \$1 \$2; #X obj 59 266 trigger bang anything; #X obj 201 286 list; #X obj 383 383 outlet; #X obj 384 22 netreceive 34567; #X obj 477 43 tgl 15 0 empty empty empty 0 -6 0 10 -262144 -1 -1 0 1; #X obj 384 41 bng 15 250 50 0 empty empty empty 0 -6 0 10 -262144 -1 -1; #X obj 187 24 delay 15000; #X text 345 379 close; #X text 209 4 for open/close automation in Makefile; #N canvas 698 22 318 215 reset 0; #X obj 65 24 inlet; #X obj 66 58 bang; #X obj 66 150 send ARDUINO_TEST_RESET; #X msg 66 129 0; #X msg 111 99 1; #X obj 111 120 send ARDUINO_PINMODE_RESET; #X connect 0 0 1 0; #X connect 1 0 3 0; #X connect 1 0 4 0; #X connect 3 0 2 0; #X connect 4 0 5 0; #X restore 172 111 pd reset guis; #X connect 2 0 6 0; #X connect 2 0 19 0; #X connect 3 0 2 0; #X connect 4 0 1 0; #X connect 5 0 4 0; #X connect 6 0 5 0; #X connect 6 0 7 0; #X connect 7 0 10 0; #X connect 9 0 8 0; #X connect 10 0 8 0; #X connect 10 1 11 0; #X connect 11 0 9 0; #X connect 13 0 15 0; #X connect 13 1 14 0; #X connect 15 0 16 0; #X connect 15 0 12 0; #X connect 16 0 2 0; #X coords 0 -1 1 1 136 17 1 60 60; #X restore 161 149 pd serin; #X text 158 131 serial port #; #X msg 221 172 close; #X obj 85 104 hsl 150 17 0 1 0 0 empty ARDUINO_TEST_RESET analog_output_(0-1) 20 9 1 10 -225271 -1 -1 0 0; #X obj 267 302 tgl 15 1 empty empty empty 0 -6 0 8 -225271 -1 -1 1 1; #X msg 437 222 digitalIns 2 1; #X msg 437 165 analogIns 0 0; #N canvas 162 133 610 460 serin 0; #X obj 59 337 outlet; #X obj 59 266 trigger bang anything; #X obj 201 286 list; #X obj 60 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 0 5 9 1 12 -262130 -1 -1 0 1; #X obj 75 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 1 5 9 1 12 -262130 -1 -1 0 1; #X obj 90 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 2 5 9 1 12 -262130 -1 -1 0 1; #X obj 105 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 3
Re: [PD] pduino digital read problems
Hans-Christoph Steiner wrote: Oops, yes indeed, I just updated that. I'm actually thinking that the digitalIns and analogIns messages are just extra complications without much benefit. I am thinking that setting pinMode to "analog" or "input" should just send that message too. How does that sound? makes sense to me too! ø .hc On Nov 19, 2009, at 3:13 PM, altern wrote: aso it was a problem with the documentation. great, now it is working. thanks!! Hans-Christoph Steiner(e)k dio: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra If you are not part of the solution, you are part of the problem. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list -- ETs DNA will not be televised ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
sounds ok to me but i use arduino very little so i my opinion should not count too much :) Hans-Christoph Steiner(e)k dio: Oops, yes indeed, I just updated that. I'm actually thinking that the digitalIns and analogIns messages are just extra complications without much benefit. I am thinking that setting pinMode to "analog" or "input" should just send that message too. How does that sound? .hc On Nov 19, 2009, at 3:13 PM, altern wrote: aso it was a problem with the documentation. great, now it is working. thanks!! Hans-Christoph Steiner(e)k dio: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra If you are not part of the solution, you are part of the problem. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
Oops, yes indeed, I just updated that. I'm actually thinking that the digitalIns and analogIns messages are just extra complications without much benefit. I am thinking that setting pinMode to "analog" or "input" should just send that message too. How does that sound? .hc On Nov 19, 2009, at 3:13 PM, altern wrote: aso it was a problem with the documentation. great, now it is working. thanks!! Hans-Christoph Steiner(e)k dio: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra If you are not part of the solution, you are part of the problem. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
aso it was a problem with the documentation. great, now it is working. thanks!! Hans-Christoph Steiner(e)k dio: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
I'm not sure what you mean, but Patches welcome! :-D .hc On Nov 19, 2009, at 1:44 PM, olsen wrote: wouldn't it be nice to have the info in the brackets somewhere in the arduino-help? Hans-Christoph Steiner wrote: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list -- ETs DNA will not be televised "It is convenient to imagine a power beyond us because that means we don't have to examine our own lives.", from "The Idols of Environmentalism", by Curtis White ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
Hans-Christoph Steiner wrote: If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). wouldn't it be nice to have the info in the brackets somewhere in the arduino-help? If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list -- ETs DNA will not be televised ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Re: [PD] pduino digital read problems
If you look at the arduino-help.pd or arduino-test.pd, the message should be [digitalIns 1 1(. The first number is the port# and the second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins 8-13, PORT2==analog pins). If you are using Arduino 0017, you might want to upgrade the included Firmata library with the latest version (check the README for how) http://at.or.at/hans/pd/objects.html#pduino .hc On Nov 19, 2009, at 6:16 AM, altern wrote: hi i am doing this small example to read a digital sensor with pduino. i test it with an arduino program that reads pin 2 and writes it to pin 13 and this works fine, i get a LED light on and off with my infrared sensor. however when i try this very same setup in PD i dont get it to work. i am starting up arduino object to the right COM port, i can write manually to pin 13 and the LED flashes, but i dont get anything from pin 2. I have not used digital sensors for ages with PD so i dont remember the right way to set them up. I send this message to arduino pinMode 2 0 i also tried sending before digitalIns 1 but nothing comes from comport outlet. so i am not sure what i am doing wrong please help! enrike ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list