Re: Repairs to MX top plate prism housing
Fotolux Finland has 2 NIB top plate for about 300FIM each. and also the guy is good. divide 6 to give a rough estimate of the price in USD. Philippe I've managed to dent the front of the prism housing on my trusty old MX (a pretty shabby reward for 25 years of sterling service!). Should I: o Try and find a replacement top plate from a 'parts' MX - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Repairs to MX top plate prism housing
I've managed to dent the front of the prism housing on my trusty old MX (a pretty shabby reward for 25 years of sterling service!). Should I: o Try and find a replacement top plate from a 'parts' MX o See if my local repair shop can straighten things out o Attempt to do it myself (I've got the service manual) o Leave well enough alone - it still appears to work OK. -- John Francis [EMAIL PROTECTED] Silicon Graphics, Inc. (650)933-82952011 N. Shoreline Blvd. MS 43U-991 (650)932-0828 (Fax) Mountain View, CA 94043-1389 Hello. My name is Darth Vader. I am your father. Prepare to die. - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: Repairs to MX top plate prism housing
In a message dated 4/17/01 7:39:09 PM Central Daylight Time, [EMAIL PROTECTED] writes: I've managed to dent the front of the prism housing on my trusty old MX (a pretty shabby reward for 25 years of sterling service!). Should I: o Try and find a replacement top plate from a 'parts' MX o See if my local repair shop can straighten things out o Attempt to do it myself (I've got the service manual) o Leave well enough alone - it still appears to work OK. John, Leave well enough alone, at least until you need a CLA or more... Especially if you can't see anything wrong with the viewfinder. Regards, Bob S. - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: Repairs to MX top plate prism housing
In a message dated 4/17/01 7:39:09 PM Central Daylight Time, [EMAIL PROTECTED] writes: I've managed to dent the front of the prism housing on my trusty old MX (a pretty shabby reward for 25 years of sterling service!). Should I: o Try and find a replacement top plate from a 'parts' MX o See if my local repair shop can straighten things out o Attempt to do it myself (I've got the service manual) o Leave well enough alone - it still appears to work OK. I'd leave it alone for now. If it nudged the pentaprism it's possible that the focus might be a touch off, so run a test roll through it to make sure it's focusing accurately. After that, unless you're planning on selling it, leave it... it's got some character now. :) chris - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .