Re: [PLUG] Of Wine, USB and getting them talking
No, if you click on it, it reports as empty. I look at it as a black hole. Stuff goes in but not much comes out Actually you can download what is called the code plug, but the program does that so I assume it is talking to something on that device that does not show up as a file. The funny thing is Wine shows it as device d:, on my win 10 box d; is something else so it comes up as e: On Wed, Jun 24, 2020 at 12:19 PM Michael Barnes wrote: > On Wed, Jun 24, 2020, 09:25 Chuck Hast wrote: > > > Under Win10 it comes up as E: removable disk, under device > > Manager it says it is a STM microdevices removable flash > > drive. > > > > On Wed, Jun 24, 2020 at 11:11 AM Chuck Hast wrote: > > > > > It is the control processor of the radio it is a > > > STM32F405VGT6. > > > I can send you the radio service manual if that will help. From what > > > I can see it appears that it is treated like some sort of memory, and > > > the radio code plug (file that sets up the channels in the radio) that > > > is loaded into the radio is loaded into that memory. When I plug the > > > USB cable with the radio into it, Wine says it is the D: drive (well it > > > shows it as d:) I am going to see how Windows sees it and will > > > send you that data too. If you want to see all related to the radio you > > > can go to this page: > > > http://www.connectsystems.com/products/top/radios/CS800D_SOFTWARE.htm > > > > > > Here is the link to the service manual where the processor data > > > (what little there is) can be found. > > > > > > > > > http://www.connectsystems.com/products/top/radios/CS800/CS800%20SERVICE%20MANUAL.pdf > > > > > > > > > > > > > > > > > > On Mon, Jun 22, 2020 at 3:51 PM Chuck Hast wrote: > > > > > >> It is in a radio a DMR radio the CS800D by connect systems, I will try > > to > > >> find > > >> out more about it. > > >> > > >> On Sat, Jun 20, 2020 at 2:11 PM Galen Seitz > > >> wrote: > > >> > > >>> On 6/19/20 3:26 PM, Chuck Hast wrote: > > >>> > Folks, > > >>> > I have a device that uses an STMicro device in it. The software to > > >>> > program the device is in Windows, when I run the software in Wine > > >>> > it sees all it is supposed to see but the USB part. I am trying to > > >>> figure > > >>> > out what I need to do to get it to see the device so I can program > it > > >>> > without having to go to a Windows VM. > > >>> > > >>> Please describe your STM device in more detail. What is it, what > does > > >>> it do, and what processor does it contain? I do a lot of STM32 > > >>> development, so I *may* be able to help. > > >>> > > >>> galen > > >>> -- > > >>> Galen Seitz > > >>> gal...@seitzassoc.com > > >>> ___ > > >>> PLUG mailing list > > >>> PLUG@pdxlinux.org > > >>> http://lists.pdxlinux.org/mailman/listinfo/plug > > >>> > > >> > > >> > > >> -- > > >> > > >> Chuck Hast -- KP4DJT -- > > >> I can do all things through Christ which strengtheneth me. > > >> Ph 4:13 KJV > > >> Todo lo puedo en Cristo que me fortalece. > > >> Fil 4:13 RVR1960 > > >> > > >> > > > > > > -- > > > > > > Chuck Hast -- KP4DJT -- > > > I can do all things through Christ which strengtheneth me. > > > Ph 4:13 KJV > > > Todo lo puedo en Cristo que me fortalece. > > > Fil 4:13 RVR1960 > > > > > > > > > > -- > > > > Chuck Hast -- KP4DJT -- > > I can do all things through Christ which strengtheneth me. > > Ph 4:13 KJV > > Todo lo puedo en Cristo que me fortalece. > > Fil 4:13 RVR1960 > > > > > > I ran into a device that presented like that a while back. When I plugged > it into a Windows computer, it said it was a removable drive E:. It had one > file in it. I double clicked on the file and it loaded a driver for the > device. Once the driver loaded, everything worked normally. > > This may or may not apply to your situation, but I thought I might share it > just in case. > > Michael > ___ > PLUG mailing list > PLUG@pdxlinux.org > http://lists.pdxlinux.org/mailman/listinfo/plug > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Of Wine, USB and getting them talking
On Wed, Jun 24, 2020, 09:25 Chuck Hast wrote: > Under Win10 it comes up as E: removable disk, under device > Manager it says it is a STM microdevices removable flash > drive. > > On Wed, Jun 24, 2020 at 11:11 AM Chuck Hast wrote: > > > It is the control processor of the radio it is a > > STM32F405VGT6. > > I can send you the radio service manual if that will help. From what > > I can see it appears that it is treated like some sort of memory, and > > the radio code plug (file that sets up the channels in the radio) that > > is loaded into the radio is loaded into that memory. When I plug the > > USB cable with the radio into it, Wine says it is the D: drive (well it > > shows it as d:) I am going to see how Windows sees it and will > > send you that data too. If you want to see all related to the radio you > > can go to this page: > > http://www.connectsystems.com/products/top/radios/CS800D_SOFTWARE.htm > > > > Here is the link to the service manual where the processor data > > (what little there is) can be found. > > > > > http://www.connectsystems.com/products/top/radios/CS800/CS800%20SERVICE%20MANUAL.pdf > > > > > > > > > > > > On Mon, Jun 22, 2020 at 3:51 PM Chuck Hast wrote: > > > >> It is in a radio a DMR radio the CS800D by connect systems, I will try > to > >> find > >> out more about it. > >> > >> On Sat, Jun 20, 2020 at 2:11 PM Galen Seitz > >> wrote: > >> > >>> On 6/19/20 3:26 PM, Chuck Hast wrote: > >>> > Folks, > >>> > I have a device that uses an STMicro device in it. The software to > >>> > program the device is in Windows, when I run the software in Wine > >>> > it sees all it is supposed to see but the USB part. I am trying to > >>> figure > >>> > out what I need to do to get it to see the device so I can program it > >>> > without having to go to a Windows VM. > >>> > >>> Please describe your STM device in more detail. What is it, what does > >>> it do, and what processor does it contain? I do a lot of STM32 > >>> development, so I *may* be able to help. > >>> > >>> galen > >>> -- > >>> Galen Seitz > >>> gal...@seitzassoc.com > >>> ___ > >>> PLUG mailing list > >>> PLUG@pdxlinux.org > >>> http://lists.pdxlinux.org/mailman/listinfo/plug > >>> > >> > >> > >> -- > >> > >> Chuck Hast -- KP4DJT -- > >> I can do all things through Christ which strengtheneth me. > >> Ph 4:13 KJV > >> Todo lo puedo en Cristo que me fortalece. > >> Fil 4:13 RVR1960 > >> > >> > > > > -- > > > > Chuck Hast -- KP4DJT -- > > I can do all things through Christ which strengtheneth me. > > Ph 4:13 KJV > > Todo lo puedo en Cristo que me fortalece. > > Fil 4:13 RVR1960 > > > > > > -- > > Chuck Hast -- KP4DJT -- > I can do all things through Christ which strengtheneth me. > Ph 4:13 KJV > Todo lo puedo en Cristo que me fortalece. > Fil 4:13 RVR1960 > > I ran into a device that presented like that a while back. When I plugged it into a Windows computer, it said it was a removable drive E:. It had one file in it. I double clicked on the file and it loaded a driver for the device. Once the driver loaded, everything worked normally. This may or may not apply to your situation, but I thought I might share it just in case. Michael ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Of Wine, USB and getting them talking
Under Win10 it comes up as E: removable disk, under device Manager it says it is a STM microdevices removable flash drive. On Wed, Jun 24, 2020 at 11:11 AM Chuck Hast wrote: > It is the control processor of the radio it is a > STM32F405VGT6. > I can send you the radio service manual if that will help. From what > I can see it appears that it is treated like some sort of memory, and > the radio code plug (file that sets up the channels in the radio) that > is loaded into the radio is loaded into that memory. When I plug the > USB cable with the radio into it, Wine says it is the D: drive (well it > shows it as d:) I am going to see how Windows sees it and will > send you that data too. If you want to see all related to the radio you > can go to this page: > http://www.connectsystems.com/products/top/radios/CS800D_SOFTWARE.htm > > Here is the link to the service manual where the processor data > (what little there is) can be found. > > http://www.connectsystems.com/products/top/radios/CS800/CS800%20SERVICE%20MANUAL.pdf > > > > > > On Mon, Jun 22, 2020 at 3:51 PM Chuck Hast wrote: > >> It is in a radio a DMR radio the CS800D by connect systems, I will try to >> find >> out more about it. >> >> On Sat, Jun 20, 2020 at 2:11 PM Galen Seitz >> wrote: >> >>> On 6/19/20 3:26 PM, Chuck Hast wrote: >>> > Folks, >>> > I have a device that uses an STMicro device in it. The software to >>> > program the device is in Windows, when I run the software in Wine >>> > it sees all it is supposed to see but the USB part. I am trying to >>> figure >>> > out what I need to do to get it to see the device so I can program it >>> > without having to go to a Windows VM. >>> >>> Please describe your STM device in more detail. What is it, what does >>> it do, and what processor does it contain? I do a lot of STM32 >>> development, so I *may* be able to help. >>> >>> galen >>> -- >>> Galen Seitz >>> gal...@seitzassoc.com >>> ___ >>> PLUG mailing list >>> PLUG@pdxlinux.org >>> http://lists.pdxlinux.org/mailman/listinfo/plug >>> >> >> >> -- >> >> Chuck Hast -- KP4DJT -- >> I can do all things through Christ which strengtheneth me. >> Ph 4:13 KJV >> Todo lo puedo en Cristo que me fortalece. >> Fil 4:13 RVR1960 >> >> > > -- > > Chuck Hast -- KP4DJT -- > I can do all things through Christ which strengtheneth me. > Ph 4:13 KJV > Todo lo puedo en Cristo que me fortalece. > Fil 4:13 RVR1960 > > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Of Wine, USB and getting them talking
It is the control processor of the radio it is a STM32F405VGT6. I can send you the radio service manual if that will help. From what I can see it appears that it is treated like some sort of memory, and the radio code plug (file that sets up the channels in the radio) that is loaded into the radio is loaded into that memory. When I plug the USB cable with the radio into it, Wine says it is the D: drive (well it shows it as d:) I am going to see how Windows sees it and will send you that data too. If you want to see all related to the radio you can go to this page: http://www.connectsystems.com/products/top/radios/CS800D_SOFTWARE.htm Here is the link to the service manual where the processor data (what little there is) can be found. http://www.connectsystems.com/products/top/radios/CS800/CS800%20SERVICE%20MANUAL.pdf On Mon, Jun 22, 2020 at 3:51 PM Chuck Hast wrote: > It is in a radio a DMR radio the CS800D by connect systems, I will try to > find > out more about it. > > On Sat, Jun 20, 2020 at 2:11 PM Galen Seitz wrote: > >> On 6/19/20 3:26 PM, Chuck Hast wrote: >> > Folks, >> > I have a device that uses an STMicro device in it. The software to >> > program the device is in Windows, when I run the software in Wine >> > it sees all it is supposed to see but the USB part. I am trying to >> figure >> > out what I need to do to get it to see the device so I can program it >> > without having to go to a Windows VM. >> >> Please describe your STM device in more detail. What is it, what does >> it do, and what processor does it contain? I do a lot of STM32 >> development, so I *may* be able to help. >> >> galen >> -- >> Galen Seitz >> gal...@seitzassoc.com >> ___ >> PLUG mailing list >> PLUG@pdxlinux.org >> http://lists.pdxlinux.org/mailman/listinfo/plug >> > > > -- > > Chuck Hast -- KP4DJT -- > I can do all things through Christ which strengtheneth me. > Ph 4:13 KJV > Todo lo puedo en Cristo que me fortalece. > Fil 4:13 RVR1960 > > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Of Wine, USB and getting them talking
It is in a radio a DMR radio the CS800D by connect systems, I will try to find out more about it. On Sat, Jun 20, 2020 at 2:11 PM Galen Seitz wrote: > On 6/19/20 3:26 PM, Chuck Hast wrote: > > Folks, > > I have a device that uses an STMicro device in it. The software to > > program the device is in Windows, when I run the software in Wine > > it sees all it is supposed to see but the USB part. I am trying to figure > > out what I need to do to get it to see the device so I can program it > > without having to go to a Windows VM. > > Please describe your STM device in more detail. What is it, what does > it do, and what processor does it contain? I do a lot of STM32 > development, so I *may* be able to help. > > galen > -- > Galen Seitz > gal...@seitzassoc.com > ___ > PLUG mailing list > PLUG@pdxlinux.org > http://lists.pdxlinux.org/mailman/listinfo/plug > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Of Wine, USB and getting them talking
On 6/19/20 3:26 PM, Chuck Hast wrote: Folks, I have a device that uses an STMicro device in it. The software to program the device is in Windows, when I run the software in Wine it sees all it is supposed to see but the USB part. I am trying to figure out what I need to do to get it to see the device so I can program it without having to go to a Windows VM. Please describe your STM device in more detail. What is it, what does it do, and what processor does it contain? I do a lot of STM32 development, so I *may* be able to help. galen -- Galen Seitz gal...@seitzassoc.com ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
[PLUG] Of Wine, USB and getting them talking
Folks, I have a device that uses an STMicro device in it. The software to program the device is in Windows, when I run the software in Wine it sees all it is supposed to see but the USB part. I am trying to figure out what I need to do to get it to see the device so I can program it without having to go to a Windows VM. Here is the tail from when I plug the device in: Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.425528] usb 2-1.2: new full-speed USB device number 5 using ehci-pci Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.536206] usb 2-1.2: New USB device found, idVendor=0483, idProduct=5720, bcdDevice= 2.00 Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.536210] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.536213] usb 2-1.2: Product: Mass Storage in FS Mode Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.536214] usb 2-1.2: Manufacturer: STMicroelectronics Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.536216] usb 2-1.2: SerialNumber: 001B Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.538438] usb-storage 2-1.2:1.0: USB Mass Storage device detected Jun 19 16:43:10 kp4djt-T420 kernel: [ 117.538958] scsi host6: usb-storage 2-1.2:1.0 Jun 19 16:43:10 kp4djt-T420 mtp-probe: checking bus 2, device 5: "/sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.2" Jun 19 16:43:10 kp4djt-T420 mtp-probe: bus: 2, device: 5 was not an MTP device Jun 19 16:43:10 kp4djt-T420 mtp-probe: checking bus 2, device 5: "/sys/devices/pci:00/:00:1d.0/usb2/2-1/2-1.2" Jun 19 16:43:10 kp4djt-T420 mtp-probe: bus: 2, device: 5 was not an MTP device Jun 19 16:43:11 kp4djt-T420 kernel: [ 118.546993] scsi 6:0:0:0: Direct-Access STM microSD Flash1.00 PQ: 0 ANSI: 2 Jun 19 16:43:11 kp4djt-T420 kernel: [ 118.548282] sd 6:0:0:0: Attached scsi generic sg2 type 0 Jun 19 16:43:11 kp4djt-T420 kernel: [ 118.567850] sd 6:0:0:0: [sdb] Attached SCSI removable disk As you can see the OS sees it and appears to recognize it for what it is. Here is what shows up in .wine/dosdevices: lrwxrwxrwx 1 kp4djt kp4djt 10 Jun 19 16:46 com8 -> /dev/ttyS7 lrwxrwxrwx 1 kp4djt kp4djt 10 Jun 19 16:46 com9 -> /dev/ttyS8 lrwxrwxrwx 1 kp4djt kp4djt8 Jun 16 2018 d:: -> /dev/sdb <<< It is drive D: lrwxrwxrwx 1 kp4djt kp4djt8 Jun 16 2018 e:: -> /dev/sr0 The device is the 3rd line down and I have labeled it <<< It is drive D: When I run the program under Wine it does not recognize it, It just occurred to me to wonder if it is looking for D: but it is labeled as d:? -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug