Re: Hello, newbie having trouble with getting started and pro tools.
I have resolve the issue, of getting sound, but now the only thing I am having trouble with, is when recording for some reason, when I use my keyboard it only comes out of one speaker. I have the input set as one into stereo I have the track set as a stereo track, and I have the output set to default left and right. I am using the onboard sounds of my keyboard and not midi. The board is a Yamaha motif XF, I thought that the sounds I would like to use or better on this unit. Sent from my iPhone > On Nov 21, 2015, at 8:10 AM, TheOreoMonster wrote: > > The point still remains. You generally won’t want system sound and pro tools > going through the same interface at the same time for performance reason > >> On Nov 20, 2015, at 8:56 PM, Vaughn Brown wrote: >> >> It depends on if you want the system sound to play through the >> speakers associated with the sound interface. >> Yes, it is under setup, far too the right in the menu. >> Vaughn >> >>> On 11/20/15, TheOreoMonster wrote: >>> You may have to go into I/o Settings as well delete the inputs and >>> outputs and set to defaults as well. >>> On 11/20/15, Darwin May wrote: I went to the general playback under the settings menu, and the Digi 003 is the playback. Sent from my iPhone > On Nov 20, 2015, at 12:51 PM, TheOreoMonster > wrote: > > It's not usually recommended to use the same interface as your mac > audio interface and your protools interface. In system preferences > > sound >input and outputs you want to leave those set to your defaults > or something else. In pro tools you will need to select the pro > tools interface under playback device. i believe this is under the > set up menu. > >> On 11/20/15, Vaughn Brown wrote: >> OK, >> >> You may find the solution under the Mac's sounds, output and input. >> See if your Mac can see your this device. Set it as default. Then look >> in Protools under set up hardware. You may have to get Protools to >> "see" the device, too. >> >> I hope this helps. >> Vaughn >> >>> On 11/19/15, Slau Halatyn wrote: >>> Hi Darwin, >>> >>> Just saw that you posted this message here before we had communicated >>> off-list. Another approach you can take to eliminate variables and >>> make >>> sure >>> you're getting signal to begin with is to create an aux track and >>> instantiate a signal generator plug-in. The generator will >>> automatically >>> come up generating a tone. That way, you're sure to have a signal >>> coming >>> through and work on getting your monitor out confirmed. Also, BTW, >>> make >>> sure >>> your playback engine has the 003 set to be the output. After that's >>> sorted >>> out, you'll probably want to go through the "Getting Started" pdf >>> manual >>> to >>> get oriented. Keep us posted on your progress. >>> >>> Slau >>> On Nov 19, 2015, at 10:37 PM, Darwin May wrote: Hello, guys, I am a person who is new at pro tools, I got a 003 consul and I am trying to get sound through it to the ProTools software. At the current moment I am running ProTools 11.3, I am waiting on my order of the official ProTools to come in, so I am using the demo version as of right now. The situation is as follows, I am using a 003 surface controller I have two cables running from powered monitor speakers to the monitor jacks on the back, then I have my keyboard running into channel 1, I have all drivers and software installed on my MacBook pro, such as the 003 family driver and of course ProTools. I have my channel 1 going to input one mono and on the output part of the track I have set Output one, sorry if sounds silly. I am new with ProTools I have always use logic in the past. Any help would be greatly appreciated. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> Vaughn Brown >> Berklee College of Music Graduate, Bachelor in
volosity in x band 2
Hey guys. can any one tell me if there is a way to adjust volocity when recording drum tracks with a keyboard using x band 2. basically i want to be able to hit a note, and not have to wak the hell out of it to get say a good kick sound. i can’t seem to find a volocity setting. but it may be there, maybe i’m missing it. is this possible. Steve -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Hi Brian, The meter is in the channel strip. It'll show up after you've checked the boxes in the Preferences dialog. Zoom will maximize the window. Try not to show inserts f through j and sends f through j. HTH, Slau On Nov 22, 2015, at 8:17 PM, Brian Howerton wrote: > Thanks Slau. Where is the meter,, is that on the compressor plug itself, and > how do I maximize the screen, and is it always good to have it maximized in > pro tools? > Brian > > Sent from my iPhone > >> On Nov 22, 2015, at 6:22 PM, Slau Halatyn wrote: >> >> Hi Brian, >> >> In the Metering tab of the Preferences window there are a few checkboxes >> you'll need to set. They're fairly obvious. Don't show too many items in the >> Mix window and maximize your screen. You should see the meter working >> whenever gain reduction is occurring. >> >> Slau >> >>> On Nov 22, 2015, at 4:57 PM, Brian Howerton wrote: >>> >>> This is great Slau, it did in fact work. Now, a random question, I know >>> that you said that the gain reduction meters are now working now. Is there >>> anything I need to set in preferences to be able to read these now with >>> voiceover? Do I need to show the gain reduction meters, and if so, where >>> in prefs is that setting located? Thank so much Slau, >>> Brian On Nov 22, 2015, at 4:36 PM, Slau Halatyn wrote: Hi Brian, I don't have much time to think of it right now but, for confirmation, you can go to Applications>Pro Tools and hit Command-i. Navigate to the Version and you should see that it's 12.3. Slau > On Nov 22, 2015, at 1:44 PM, Brian Howerton wrote: > > Hello all, > I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, > but just to make sure, can someone tell me some of the new things I > should be seeing in pro tools 12.3? I do see 2 volume faders when > interacting with a new track, what other new thing should I be seeing > with voiceover? I am just asking so I can mae sure that the upgrade was > indeed a success. Thanks, > Brian > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Thanks Slau. Where is the meter,, is that on the compressor plug itself, and how do I maximize the screen, and is it always good to have it maximized in pro tools? Brian Sent from my iPhone > On Nov 22, 2015, at 6:22 PM, Slau Halatyn wrote: > > Hi Brian, > > In the Metering tab of the Preferences window there are a few checkboxes > you'll need to set. They're fairly obvious. Don't show too many items in the > Mix window and maximize your screen. You should see the meter working > whenever gain reduction is occurring. > > Slau > >> On Nov 22, 2015, at 4:57 PM, Brian Howerton wrote: >> >> This is great Slau, it did in fact work. Now, a random question, I know >> that you said that the gain reduction meters are now working now. Is there >> anything I need to set in preferences to be able to read these now with >> voiceover? Do I need to show the gain reduction meters, and if so, where in >> prefs is that setting located? Thank so much Slau, >> Brian >>> On Nov 22, 2015, at 4:36 PM, Slau Halatyn wrote: >>> >>> Hi Brian, >>> >>> I don't have much time to think of it right now but, for confirmation, you >>> can go to Applications>Pro Tools and hit Command-i. Navigate to the Version >>> and you should see that it's 12.3. >>> >>> Slau >>> On Nov 22, 2015, at 1:44 PM, Brian Howerton wrote: Hello all, I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but just to make sure, can someone tell me some of the new things I should be seeing in pro tools 12.3? I do see 2 volume faders when interacting with a new track, what other new thing should I be seeing with voiceover? I am just asking so I can mae sure that the upgrade was indeed a success. Thanks, Brian -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
Yep, call Avid. On Nov 22, 2015, at 3:31 PM, Nick Gawronski wrote: > Hi, I did check that checkbox and tried what you suggested and there is a > value in the selection edit length edit box. However even when loop is > turned on and I can hear the selection looping still the deletion does not > delete the selection no matter what edit mode I am in. Would calling Avid > support be the best option as I do have the educational support plan for a > few more months and they might be able to find out very quickly what is > going on as every time I try something to fix the issue I get nowhere? > Nick Gawronski > On Sun, November 22, 2015 8:57 am, Slau Halatyn wrote: >> Here's what I would do: >> Make sure "Insertion Follows Scrub" is checked in Preferences. Use your >> scrub wheel within a track to make sure that there's an insertion point. >> Make sure you hear audio at some point while scrubbing. Once you've >> scrubbed, stop the transport. Make your selection as you did before, >> using the down and up arrows. Confirm that your selection range is what >> you want to delete. You should be able to simply press the space bar to >> have that section play Check that your length field in the Edit window >> reflects the length of what you're intending to delete. The precise >> length doesn't matter as long as it seems a reasonable length consistent >> with what you've selected. Now make sure all of the tracks are selected >> where you want the audio to be deleted. Press delete. Press space bar to >> verify that the audio was deleted. >> >> On Nov 22, 2015, at 12:47 AM, Nick Gawronski >> wrote: >> >> >>> Hi, I did check and both of these are checked. Does it matter what >>> method I use to do the selection that I wish to delete or should this >>> not have any issues as I have been using the down and up arrow keys? >>> Nick >>> Gawronski >>> On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: >>> I'd check to make sure that Edit and Timeline are linked under the Options menu and that Edit Follows Track Selection is also checked under the same menu. On Nov 21, 2015, at 6:15 PM, Nick Gawronski wrote: > Hi, I was trying to edit some audio projects me and a friend did > and am running the latest version of Pro Tools 12.3 and OS X 10.11 > and have made sure all tracks are selected. I do the down and up > arrow to select the clicks and the breaths at the beginning that I > wish to delete and the selection plays and I am even able to move > the selection start and end points. However when I press delete and > then go back to the beginning of the session the click and the > breaths are still there. I am in wave form view and only have one > playlist in the session. What else should I check to see if this is > causing the issues as I have checked and tried all different edit > modes with no result? Nick Gawronski > > > > -- > You received this message because you are subscribed to the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, > send an email to ptaccess+unsubscr...@googlegroups.com. For more > options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >>> visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. For more options, visit >> https://groups.google.com/d/optout. >> >> > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Hi Brian, In the Metering tab of the Preferences window there are a few checkboxes you'll need to set. They're fairly obvious. Don't show too many items in the Mix window and maximize your screen. You should see the meter working whenever gain reduction is occurring. Slau On Nov 22, 2015, at 4:57 PM, Brian Howerton wrote: > This is great Slau, it did in fact work. Now, a random question, I know that > you said that the gain reduction meters are now working now. Is there > anything I need to set in preferences to be able to read these now with > voiceover? Do I need to show the gain reduction meters, and if so, where in > prefs is that setting located? Thank so much Slau, > Brian >> On Nov 22, 2015, at 4:36 PM, Slau Halatyn wrote: >> >> Hi Brian, >> >> I don't have much time to think of it right now but, for confirmation, you >> can go to Applications>Pro Tools and hit Command-i. Navigate to the Version >> and you should see that it's 12.3. >> >> Slau >> >> On Nov 22, 2015, at 1:44 PM, Brian Howerton wrote: >> >>> Hello all, >>> I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but >>> just to make sure, can someone tell me some of the new things I should be >>> seeing in pro tools 12.3? I do see 2 volume faders when interacting with a >>> new track, what other new thing should I be seeing with voiceover? I am >>> just asking so I can mae sure that the upgrade was indeed a success. >>> Thanks, >>> Brian >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
This is great Slau, it did in fact work. Now, a random question, I know that you said that the gain reduction meters are now working now. Is there anything I need to set in preferences to be able to read these now with voiceover? Do I need to show the gain reduction meters, and if so, where in prefs is that setting located? Thank so much Slau, Brian > On Nov 22, 2015, at 4:36 PM, Slau Halatyn wrote: > > Hi Brian, > > I don't have much time to think of it right now but, for confirmation, you > can go to Applications>Pro Tools and hit Command-i. Navigate to the Version > and you should see that it's 12.3. > > Slau > > On Nov 22, 2015, at 1:44 PM, Brian Howerton wrote: > >> Hello all, >> I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but >> just to make sure, can someone tell me some of the new things I should be >> seeing in pro tools 12.3? I do see 2 volume faders when interacting with a >> new track, what other new thing should I be seeing with voiceover? I am >> just asking so I can mae sure that the upgrade was indeed a success. Thanks, >> Brian >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Hi Brian, I don't have much time to think of it right now but, for confirmation, you can go to Applications>Pro Tools and hit Command-i. Navigate to the Version and you should see that it's 12.3. Slau On Nov 22, 2015, at 1:44 PM, Brian Howerton wrote: > Hello all, > I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but > just to make sure, can someone tell me some of the new things I should be > seeing in pro tools 12.3? I do see 2 volume faders when interacting with a > new track, what other new thing should I be seeing with voiceover? I am just > asking so I can mae sure that the upgrade was indeed a success. Thanks, > Brian > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Actually, the first volume fader still moves in half a dB increment. It's the second slider that moves in a tenth. That's the indicator that you can Command-click to cycle between volume, peak and sample delay displays. On Nov 22, 2015, at 4:01 PM, Christopher-Mark Gilland wrote: > Try interacting with the volume slider on a track. You'll notice that > instead of it moving in half a DB increments, it now moves in a 10th a DB > increments. This really really confused me at first, as I was like, why > isn't the damn level increasing when holding down vo+Up arrow. Finally I > looked, and that's when it dawned on me. > > I don't recall 12.2 doing this, though I could be wrong. > > Chris. > > - Original Message - From: "Brian Howerton" > To: > Sent: Sunday, November 22, 2015 1:44 PM > Subject: pro tools 12.3 upgrade, I think it was a cuccess > > > Hello all, > I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but > just to make sure, can someone tell me some of the new things I should be > seeing in pro tools 12.3? I do see 2 volume faders when interacting with a > new track, what other new thing should I be seeing with voiceover? I am just > asking so I can mae sure that the upgrade was indeed a success. Thanks, > Brian > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: pro tools 12.3 upgrade, I think it was a cuccess
Try interacting with the volume slider on a track. You'll notice that instead of it moving in half a DB increments, it now moves in a 10th a DB increments. This really really confused me at first, as I was like, why isn't the damn level increasing when holding down vo+Up arrow. Finally I looked, and that's when it dawned on me. I don't recall 12.2 doing this, though I could be wrong. Chris. - Original Message - From: "Brian Howerton" To: Sent: Sunday, November 22, 2015 1:44 PM Subject: pro tools 12.3 upgrade, I think it was a cuccess Hello all, I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but just to make sure, can someone tell me some of the new things I should be seeing in pro tools 12.3? I do see 2 volume faders when interacting with a new track, what other new thing should I be seeing with voiceover? I am just asking so I can mae sure that the upgrade was indeed a success. Thanks, Brian -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
Hi, I did check that checkbox and tried what you suggested and there is a value in the selection edit length edit box. However even when loop is turned on and I can hear the selection looping still the deletion does not delete the selection no matter what edit mode I am in. Would calling Avid support be the best option as I do have the educational support plan for a few more months and they might be able to find out very quickly what is going on as every time I try something to fix the issue I get nowhere? Nick Gawronski On Sun, November 22, 2015 8:57 am, Slau Halatyn wrote: > Here's what I would do: > Make sure "Insertion Follows Scrub" is checked in Preferences. Use your > scrub wheel within a track to make sure that there's an insertion point. > Make sure you hear audio at some point while scrubbing. Once you've > scrubbed, stop the transport. Make your selection as you did before, > using the down and up arrows. Confirm that your selection range is what > you want to delete. You should be able to simply press the space bar to > have that section play Check that your length field in the Edit window > reflects the length of what you're intending to delete. The precise > length doesn't matter as long as it seems a reasonable length consistent > with what you've selected. Now make sure all of the tracks are selected > where you want the audio to be deleted. Press delete. Press space bar to > verify that the audio was deleted. > > On Nov 22, 2015, at 12:47 AM, Nick Gawronski > wrote: > > >> Hi, I did check and both of these are checked. Does it matter what >> method I use to do the selection that I wish to delete or should this >> not have any issues as I have been using the down and up arrow keys? >> Nick >> Gawronski >> On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: >> >>> I'd check to make sure that Edit and Timeline are linked under the >>> Options menu and that Edit Follows Track Selection is also checked >>> under the same menu. >>> >>> On Nov 21, 2015, at 6:15 PM, Nick Gawronski >>> wrote: >>> >>> >>> Hi, I was trying to edit some audio projects me and a friend did and am running the latest version of Pro Tools 12.3 and OS X 10.11 and have made sure all tracks are selected. I do the down and up arrow to select the clicks and the breaths at the beginning that I wish to delete and the selection plays and I am even able to move the selection start and end points. However when I press delete and then go back to the beginning of the session the click and the breaths are still there. I am in wave form view and only have one playlist in the session. What else should I check to see if this is causing the issues as I have checked and tried all different edit modes with no result? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >>> visit https://groups.google.com/d/optout. >>> >>> >>> >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >> visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. For more options, visit > https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
pro tools 12.3 upgrade, I think it was a cuccess
Hello all, I believe my pro tools 12.3 upgrade from pro tools 12.0 was a success, but just to make sure, can someone tell me some of the new things I should be seeing in pro tools 12.3? I do see 2 volume faders when interacting with a new track, what other new thing should I be seeing with voiceover? I am just asking so I can mae sure that the upgrade was indeed a success. Thanks, Brian -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
Here's what I would do: Make sure "Insertion Follows Scrub" is checked in Preferences. Use your scrub wheel within a track to make sure that there's an insertion point. Make sure you hear audio at some point while scrubbing. Once you've scrubbed, stop the transport. Make your selection as you did before, using the down and up arrows. Confirm that your selection range is what you want to delete. You should be able to simply press the space bar to have that section play Check that your length field in the Edit window reflects the length of what you're intending to delete. The precise length doesn't matter as long as it seems a reasonable length consistent with what you've selected. Now make sure all of the tracks are selected where you want the audio to be deleted. Press delete. Press space bar to verify that the audio was deleted. On Nov 22, 2015, at 12:47 AM, Nick Gawronski wrote: > Hi, I did check and both of these are checked. Does it matter what method > I use to do the selection that I wish to delete or should this not have > any issues as I have been using the down and up arrow keys? Nick > Gawronski > On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: >> I'd check to make sure that Edit and Timeline are linked under the >> Options menu and that Edit Follows Track Selection is also checked under >> the same menu. >> >> On Nov 21, 2015, at 6:15 PM, Nick Gawronski >> wrote: >> >> >>> Hi, I was trying to edit some audio projects me and a friend did and am >>> running the latest version of Pro Tools 12.3 and OS X 10.11 and have >>> made sure all tracks are selected. I do the down and up arrow to select >>> the clicks and the breaths at the beginning that I wish to delete and >>> the selection plays and I am even able to move the selection start and >>> end points. However when I press delete and then go back to the >>> beginning of the session the click and the breaths are still there. I >>> am in wave form view and only have one playlist in the session. What >>> else should I check to see if this is causing the issues as I have >>> checked and tried all different edit modes with no result? Nick >>> Gawronski >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >>> visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. For more options, visit >> https://groups.google.com/d/optout. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [SPAM?] Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
There is a newer good/bad issue with latter versions of Voicover. You can now have quick navigation on or off by pressing the (left arrow and right arrow) together to toggle on/off the mode. In order for the markers to set correctly, you need to have quick nav off. You might want to check that. On 11/22/15, Martin (Punky) Sopart wrote: > Hi Nick! > > Try to press command+b to delete. > > Best! / Martin >> -Ursprüngliche Nachricht- >> Von: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] Im >> Auftrag von Nick Gawronski >> Gesendet: Sonntag, 22. November 2015 09:28 >> An: ptaccess@googlegroups.com >> Betreff: [SPAM?] Re: unable to delete audio after making selection in Pro >> Tools 12.3 and OS X 10.11 >> >> Hi, Yes I have the correct track selected and command and shift and l >> does >> tell me I have a loop as the selection plays over and over but if I press >> the delete key on the full sized Apple keyboard during the looping no >> deletion takes place and if I delete the selection when nothing is >> playing >> the selection is not selected but the audio still exists. What else >> should I look at and once I find out what is causing these issues is >> there >> a way to make the change global across all sessions as the default? Nick >> Gawronski >> On Sun, November 22, 2015 1:26 am, TheOreoMonster wrote: >> > Check that the right track is selected and also turn on loop selection >> > and play it back to check to see that you are actually making the >> > selection. >> >> On Nov 22, 2015, at 12:47 AM, Nick Gawronski >> >> wrote: >> >> >> >> >> >> Hi, I did check and both of these are checked. Does it matter what >> >> method I use to do the selection that I wish to delete or should this >> >> not have any issues as I have been using the down and up arrow keys? >> >> Nick >> >> Gawronski >> >> On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: >> >> >> >>> I'd check to make sure that Edit and Timeline are linked under the >> >>> Options menu and that Edit Follows Track Selection is also checked >> >>> under the same menu. >> >>> >> >>> On Nov 21, 2015, at 6:15 PM, Nick Gawronski >> >>> wrote: >> >>> >> >>> >> >>> >> Hi, I was trying to edit some audio projects me and a friend did >> and am running the latest version of Pro Tools 12.3 and OS X 10.11 >> and have made sure all tracks are selected. I do the down and up >> arrow to select the clicks and the breaths at the beginning that I >> wish to delete and the selection plays and I am even able to move >> the selection start and end points. However when I press delete and >> then go back to the beginning of the session the click and the >> breaths are still there. I am in wave form view and only have one >> playlist in the session. What else should I check to see if this is >> causing the issues as I have checked and tried all different edit >> modes with no result? Nick Gawronski >> >> >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, >> send an email to ptaccess+unsubscr...@googlegroups.com. For more >> options, visit https://groups.google.com/d/optout. >> >>> >> >>> -- >> >>> You received this message because you are subscribed to the Google >> >>> Groups >> >>> "Pro Tools Accessibility" group. >> >>> To unsubscribe from this group and stop receiving emails from it, >> >>> send >> >>> an email to ptaccess+unsubscr...@googlegroups.com. For more >> options, >> >>> visit https://groups.google.com/d/optout. >> >>> >> >>> >> >>> >> >> >> >> -- >> >> You received this message because you are subscribed to the Google >> >> Groups "Pro Tools Accessibility" group. >> >> To unsubscribe from this group and stop receiving emails from it, send >> >> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >> >> visit https://groups.google.com/d/optout. >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups >> > "Pro Tools Accessibility" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to ptaccess+unsubscr...@googlegroups.com. For more options, visit >> > https://groups.google.com/d/optout. >> > >> > >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.go
AW: [SPAM?] Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
Hi Nick! Try to press command+b to delete. Best! / Martin > -Ursprüngliche Nachricht- > Von: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] Im > Auftrag von Nick Gawronski > Gesendet: Sonntag, 22. November 2015 09:28 > An: ptaccess@googlegroups.com > Betreff: [SPAM?] Re: unable to delete audio after making selection in Pro > Tools 12.3 and OS X 10.11 > > Hi, Yes I have the correct track selected and command and shift and l does > tell me I have a loop as the selection plays over and over but if I press > the delete key on the full sized Apple keyboard during the looping no > deletion takes place and if I delete the selection when nothing is playing > the selection is not selected but the audio still exists. What else > should I look at and once I find out what is causing these issues is there > a way to make the change global across all sessions as the default? Nick > Gawronski > On Sun, November 22, 2015 1:26 am, TheOreoMonster wrote: > > Check that the right track is selected and also turn on loop selection > > and play it back to check to see that you are actually making the > > selection. > >> On Nov 22, 2015, at 12:47 AM, Nick Gawronski > >> wrote: > >> > >> > >> Hi, I did check and both of these are checked. Does it matter what > >> method I use to do the selection that I wish to delete or should this > >> not have any issues as I have been using the down and up arrow keys? > >> Nick > >> Gawronski > >> On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: > >> > >>> I'd check to make sure that Edit and Timeline are linked under the > >>> Options menu and that Edit Follows Track Selection is also checked > >>> under the same menu. > >>> > >>> On Nov 21, 2015, at 6:15 PM, Nick Gawronski > >>> wrote: > >>> > >>> > >>> > Hi, I was trying to edit some audio projects me and a friend did > and am running the latest version of Pro Tools 12.3 and OS X 10.11 > and have made sure all tracks are selected. I do the down and up > arrow to select the clicks and the breaths at the beginning that I > wish to delete and the selection plays and I am even able to move > the selection start and end points. However when I press delete and > then go back to the beginning of the session the click and the > breaths are still there. I am in wave form view and only have one > playlist in the session. What else should I check to see if this is > causing the issues as I have checked and tried all different edit > modes with no result? Nick Gawronski > > > > -- > You received this message because you are subscribed to the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, > send an email to ptaccess+unsubscr...@googlegroups.com. For more > options, visit https://groups.google.com/d/optout. > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > >>> Groups > >>> "Pro Tools Accessibility" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > >>> an email to ptaccess+unsubscr...@googlegroups.com. For more > options, > >>> visit https://groups.google.com/d/optout. > >>> > >>> > >>> > >> > >> -- > >> You received this message because you are subscribed to the Google > >> Groups "Pro Tools Accessibility" group. > >> To unsubscribe from this group and stop receiving emails from it, send > >> an email to ptaccess+unsubscr...@googlegroups.com. For more options, > >> visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google > Groups > > "Pro Tools Accessibility" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to ptaccess+unsubscr...@googlegroups.com. For more options, visit > > https://groups.google.com/d/optout. > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: unable to delete audio after making selection in Pro Tools 12.3 and OS X 10.11
Hi, Yes I have the correct track selected and command and shift and l does tell me I have a loop as the selection plays over and over but if I press the delete key on the full sized Apple keyboard during the looping no deletion takes place and if I delete the selection when nothing is playing the selection is not selected but the audio still exists. What else should I look at and once I find out what is causing these issues is there a way to make the change global across all sessions as the default? Nick Gawronski On Sun, November 22, 2015 1:26 am, TheOreoMonster wrote: > Check that the right track is selected and also turn on loop selection > and play it back to check to see that you are actually making the > selection. >> On Nov 22, 2015, at 12:47 AM, Nick Gawronski >> wrote: >> >> >> Hi, I did check and both of these are checked. Does it matter what >> method I use to do the selection that I wish to delete or should this >> not have any issues as I have been using the down and up arrow keys? >> Nick >> Gawronski >> On Sat, November 21, 2015 11:05 pm, Slau Halatyn wrote: >> >>> I'd check to make sure that Edit and Timeline are linked under the >>> Options menu and that Edit Follows Track Selection is also checked >>> under the same menu. >>> >>> On Nov 21, 2015, at 6:15 PM, Nick Gawronski >>> wrote: >>> >>> >>> Hi, I was trying to edit some audio projects me and a friend did and am running the latest version of Pro Tools 12.3 and OS X 10.11 and have made sure all tracks are selected. I do the down and up arrow to select the clicks and the breaths at the beginning that I wish to delete and the selection plays and I am even able to move the selection start and end points. However when I press delete and then go back to the beginning of the session the click and the breaths are still there. I am in wave form view and only have one playlist in the session. What else should I check to see if this is causing the issues as I have checked and tried all different edit modes with no result? Nick Gawronski -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >>> visit https://groups.google.com/d/optout. >>> >>> >>> >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. For more options, >> visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. For more options, visit > https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.