Re: Editing a long take
Hi Chuck: Thansk so much for this. but may i know the difference between Noise gate and strep Silence? THanks > On Nov 22, 2018, at 4:27 AM, CHUCK REICHEL > wrote: > > Hi Ramy, > > First thing to try is a noise gate and just set the threshold so only the > usable vocal can be heard. > next You can use strip silence on the vocal track and just set the threshold > below any usable vocal information on the track. > If you set it properly you'll only have the vocal track left on the track. > back up the vocal track before doing anything like this! > HTH > Chuck > "God does not play dice with the universe" > "Albert Einstein’ > > On Nov 21, 2018, at 6:30 PM, Ramy Moustafa wrote: > >> Ok, but again i must listen to the hole track in this way, right? >> there is no way to know where the singer is singing, he can sing just 1 or 2 >> words, >> and then silence for 4 or 5 bars. etc >> so the tap will not work. >> >> >>> On Nov 21, 2018, at 8:15 PM, Steve Martin wrote: >>> >>> Yeah, use tab to move to where the singing starts then when you find where >>> you want to edit use CMD+E to split the wave file there. >>> >>> On Nov 21, 2018, at 12:30 PM, Ramy Moustafa wrote: Ok, but i have the track as 1 wave file, because he needs me to open Recording and leave him sing whenever he needs. do you mean Using the Cmd+E after i listen him Singing? or what? > On Nov 21, 2018, at 3:55 PM, Steve Martin > wrote: > > Tab to transient may be useful here. Every time you are at the start of > where its blank for a while if you tab to the next transient it should > place you where he starts singing again and if needed you can rewind a > little to place the split. > >> On Nov 21, 2018, at 8:17 AM, Ramy Moustafa >> wrote: >> >> Hi: >> Am using Kepad of cores, but pressing 1 and 2 move me between bars but i >> can not listen while Moving between them. >> I have my Fader port 8, also, presssing the Fast forward keys did not >> make me listen. >> >> any ideas? >> >>> On Nov 21, 2018, at 2:10 PM, 'Stefan Albertshauser' via Pro Tools >>> Accessibility wrote: >>> >>> Hi, >>> If you’re using the numeric key pad, fast foreward is possible. If you >>> have a control surface with jog wheel, the scrubbing function >>> definitely is your friend. >>> >>> Hope, that helps. >>> >>> Stefan Am 21.11.2018 um 12:54 schrieb Ramy Moustafa : Hi all: Need to know if there is a better Strategy of editing an audio take contains some backing vocal? the VOcal asked me not to shut down the track, which means, he will sing in some places he liked, it was a Rap song. so, while editing, i have all the audio track as 1 track, is there a better way of editing it just removing unwanted Breething between a long distance? let’s say that the Rapper started his rap on bar 2, for 2 beats, he keeps silent til bar 9. and start singing again. of cores, i do not tknow when he will sing to open and close the record, which means that in editing, i must listen to the hole track to edit it. sited engineers tcan see the places that he sang as strong waves, and start editing before them. is there an accessibl solution? -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools
Re: Editing a long take
Hi Peet: THanks so much for that, they are all working. Just the Numeric Keypad is dimmed. do not know why. but it’s working as you stated. THanks again > On Nov 22, 2018, at 4:40 PM, peter bosher wrote: > > Hi Ramy, > > > Two things which might help you: > > In ProTools preferences, operation tab, transport cluster, check the > checkbox "audio during fast-forward/rewind", set the "custom FF/RW > speed" to your preference but I find around 500 % is good. then make > sure that the numeric keypad mode is set to "transport". > > Now you should be able to hear samples as you fast-forward with num-pad > 2 or rewind with numpad 1. > > > The second thing is that you can hear playback at increasingly fast > speeds by holding down the control key and pressing num-pad 6 through 9. > > > HTH, > > > Peter > > > > On 22/11/2018 02:27, CHUCK REICHEL wrote: >> Hi Ramy, >> >> First thing to try is a noise gate and just set the threshold so only the >> usable vocal can be heard. >> next You can use strip silence on the vocal track and just set the threshold >> below any usable vocal information on the track. >> If you set it properly you'll only have the vocal track left on the track. >> back up the vocal track before doing anything like this! >> HTH >> Chuck >> "God does not play dice with the universe" >> "Albert Einstein’ >> >> On Nov 21, 2018, at 6:30 PM, Ramy Moustafa wrote: >> >>> Ok, but again i must listen to the hole track in this way, right? >>> there is no way to know where the singer is singing, he can sing just 1 or >>> 2 words, >>> and then silence for 4 or 5 bars. etc >>> so the tap will not work. >>> >>> On Nov 21, 2018, at 8:15 PM, Steve Martin wrote: Yeah, use tab to move to where the singing starts then when you find where you want to edit use CMD+E to split the wave file there. > On Nov 21, 2018, at 12:30 PM, Ramy Moustafa > wrote: > > Ok, but i have the track as 1 wave file, because he needs me to open > Recording and leave him sing whenever he needs. > do you mean Using the Cmd+E after i listen him Singing? or what? > >> On Nov 21, 2018, at 3:55 PM, Steve Martin >> wrote: >> >> Tab to transient may be useful here. Every time you are at the start of >> where its blank for a while if you tab to the next transient it should >> place you where he starts singing again and if needed you can rewind a >> little to place the split. >> >>> On Nov 21, 2018, at 8:17 AM, Ramy Moustafa >>> wrote: >>> >>> Hi: >>> Am using Kepad of cores, but pressing 1 and 2 move me between bars but >>> i can not listen while Moving between them. >>> I have my Fader port 8, also, presssing the Fast forward keys did not >>> make me listen. >>> >>> any ideas? >>> On Nov 21, 2018, at 2:10 PM, 'Stefan Albertshauser' via Pro Tools Accessibility wrote: Hi, If you’re using the numeric key pad, fast foreward is possible. If you have a control surface with jog wheel, the scrubbing function definitely is your friend. Hope, that helps. Stefan > Am 21.11.2018 um 12:54 schrieb Ramy Moustafa > : > > Hi all: > > Need to know if there is a better Strategy of editing an audio take > contains some backing vocal? > the VOcal asked me not to shut down the track, which means, he will > sing in some places he liked, it was a Rap song. > so, while editing, i have all the audio track as 1 track, is there a > better way of editing it just removing unwanted Breething between a > long distance? > let’s say that the Rapper started his rap on bar 2, for 2 beats, he > keeps silent til bar 9. and start singing again. > of cores, i do not tknow when he will sing to open and close the > record, which means that in editing, i must listen to the hole track > to edit it. > sited engineers tcan see the places that he sang as strong waves, and > start editing before them. > is there an accessibl solution? > > -- > You received this message because you are subscribed to the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, > send an email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Editing a long take
Hi Ramy, Two things which might help you: In ProTools preferences, operation tab, transport cluster, check the checkbox "audio during fast-forward/rewind", set the "custom FF/RW speed" to your preference but I find around 500 % is good. then make sure that the numeric keypad mode is set to "transport". Now you should be able to hear samples as you fast-forward with num-pad 2 or rewind with numpad 1. The second thing is that you can hear playback at increasingly fast speeds by holding down the control key and pressing num-pad 6 through 9. HTH, Peter On 22/11/2018 02:27, CHUCK REICHEL wrote: > Hi Ramy, > > First thing to try is a noise gate and just set the threshold so only the > usable vocal can be heard. > next You can use strip silence on the vocal track and just set the threshold > below any usable vocal information on the track. > If you set it properly you'll only have the vocal track left on the track. > back up the vocal track before doing anything like this! > HTH > Chuck > "God does not play dice with the universe" > "Albert Einstein’ > > On Nov 21, 2018, at 6:30 PM, Ramy Moustafa wrote: > >> Ok, but again i must listen to the hole track in this way, right? >> there is no way to know where the singer is singing, he can sing just 1 or 2 >> words, >> and then silence for 4 or 5 bars. etc >> so the tap will not work. >> >> >>> On Nov 21, 2018, at 8:15 PM, Steve Martin wrote: >>> >>> Yeah, use tab to move to where the singing starts then when you find where >>> you want to edit use CMD+E to split the wave file there. >>> >>> On Nov 21, 2018, at 12:30 PM, Ramy Moustafa wrote: Ok, but i have the track as 1 wave file, because he needs me to open Recording and leave him sing whenever he needs. do you mean Using the Cmd+E after i listen him Singing? or what? > On Nov 21, 2018, at 3:55 PM, Steve Martin > wrote: > > Tab to transient may be useful here. Every time you are at the start of > where its blank for a while if you tab to the next transient it should > place you where he starts singing again and if needed you can rewind a > little to place the split. > >> On Nov 21, 2018, at 8:17 AM, Ramy Moustafa >> wrote: >> >> Hi: >> Am using Kepad of cores, but pressing 1 and 2 move me between bars but i >> can not listen while Moving between them. >> I have my Fader port 8, also, presssing the Fast forward keys did not >> make me listen. >> >> any ideas? >> >>> On Nov 21, 2018, at 2:10 PM, 'Stefan Albertshauser' via Pro Tools >>> Accessibility wrote: >>> >>> Hi, >>> If you’re using the numeric key pad, fast foreward is possible. If you >>> have a control surface with jog wheel, the scrubbing function >>> definitely is your friend. >>> >>> Hope, that helps. >>> >>> Stefan Am 21.11.2018 um 12:54 schrieb Ramy Moustafa : Hi all: Need to know if there is a better Strategy of editing an audio take contains some backing vocal? the VOcal asked me not to shut down the track, which means, he will sing in some places he liked, it was a Rap song. so, while editing, i have all the audio track as 1 track, is there a better way of editing it just removing unwanted Breething between a long distance? let’s say that the Rapper started his rap on bar 2, for 2 beats, he keeps silent til bar 9. and start singing again. of cores, i do not tknow when he will sing to open and close the record, which means that in editing, i must listen to the hole track to edit it. sited engineers tcan see the places that he sang as strong waves, and start editing before them. is there an accessibl solution? -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > -- > You received this message
