XForm Pro VS Pitch N' Time
Hey folks. Is the "XForm Rendered Only" algorithm different than the $499 real time XForm Plugin offered by Avid? Am I only getting real time control of my TCE and Pitch shifting through this upgrade, or is there an actual difference in the Isotope Radius algorithm? There appear to be no real comparisons online, and unfortunately, my ILOK key broke during the time I had the demo activated. In result, I never got a chance to experiment with it. I'm torn between this and Serato Pitch N' Time. Unfortunately, P N T can't be used within elastic pitch or TCE, so I'd have to do those edits manually via the Audio Suite window, which sucks, but if it's better quality, it's time well spent. Any help with this would be greatly appreciated. Kevin -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Pitch 'n time
John maybe the confusion is, in my explanation. So I’ll try again, Pitch -n Time pro V3 will work in PT 10.3.5 and PT11 and higher. In PT 10.3.5 the parameters can’t be read by voice over, but you can use the shortcut keys I referred to in my earlier email. There is a shortcut command to move semitones but cents can only be adjusted visually at this time… Now in PT11 and higher, you can interact with the parameters in which case you can adjust semitones and cents individually. Cents can only be incremented %17 at a time.. This is because of V-O and not Pitch -n Time. Hope this helps On Jan 20, 2015, at 2:56 PM, Slau Halation wrote: > Hi John, > > You can adjust the parameter in one cent increments. In addition, you can > adjust in percentages, note values, etc. In fact, there are dozens of > editable parameters between the pitch and time domains. Also, there are > options for resetting parameters back to defaults. > > HTH, > > Slau > > On Jan 20, 2015, at 7:54 AM, John Gunn wrote: > >> Mike, >> >> Thanks for the info but to be sure, can one move in shorter increments in >> cents? >> >> Meaning I want to move smaller then semi tones 50 cents. >> >> Take care, John >> >> >>> On Jan 19, 2015, at 4:25 PM, Mike Lockett wrote: >>> >>> Hey John, >>> Its in PT10 where you have to use short cut keys to move semitones. >>> ; >>> Theres know shortcut to move cents. >>> But in PT11 the parameters can be control by V-O. >>> When the plug-in window is open, interact with plug-in view, >>> go to output percent view interact with it, >>> V-O up or down to change the cents. >>> Hope this helps. >>> >>> On Jan 19, 2015, at 6:50 AM, John Gunn wrote: >>> >>>> Mike, >>>> >>>> Can youy also instead of semi tones change in cents value as well? >>>> >>>> John >>>> >>>> >>>>> On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: >>>>> >>>>> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >>>>> It works with Pro tools 10.3.5 and higher. >>>>> It's only accessible with 11.1 and higher with voice over. >>>>> Although in ten three there are some short cut keys that you can use for >>>>> Example >>>>> >>>>> To change pitch one semitone use the control up or down arrow depending >>>>> on the direction you need to go. >>>>> For time contraction or expansion use control and left or >>>>> rright arrow. thesecommands work any where the plug-in window is open >>>>> >>>>> Pitch ’n time is the industry go to plug for TCE and key >>>>> Manipulation >>>>> The company is Serato. >>>>> In 11 when the plug-in window is open, >>>>> Interact with the >>>>> plug-in parameter and all of it is accessible… >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message becau
Re: Pitch 'n time
Hi John, You can adjust the parameter in one cent increments. In addition, you can adjust in percentages, note values, etc. In fact, there are dozens of editable parameters between the pitch and time domains. Also, there are options for resetting parameters back to defaults. HTH, Slau On Jan 20, 2015, at 7:54 AM, John Gunn wrote: > Mike, > > Thanks for the info but to be sure, can one move in shorter increments in > cents? > > Meaning I want to move smaller then semi tones 50 cents. > > Take care, John > > >> On Jan 19, 2015, at 4:25 PM, Mike Lockett wrote: >> >> Hey John, >> Its in PT10 where you have to use short cut keys to move semitones. >> ; >> Theres know shortcut to move cents. >> But in PT11 the parameters can be control by V-O. >> When the plug-in window is open, interact with plug-in view, >> go to output percent view interact with it, >> V-O up or down to change the cents. >> Hope this helps. >> >> On Jan 19, 2015, at 6:50 AM, John Gunn wrote: >> >>> Mike, >>> >>> Can youy also instead of semi tones change in cents value as well? >>> >>> John >>> >>> >>>> On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: >>>> >>>> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >>>> It works with Pro tools 10.3.5 and higher. >>>> It's only accessible with 11.1 and higher with voice over. >>>> Although in ten three there are some short cut keys that you can use for >>>> Example >>>> >>>> To change pitch one semitone use the control up or down arrow depending on >>>> the direction you need to go. >>>> For time contraction or expansion use control and left or >>>> rright arrow. thesecommands work any where the plug-in window is open >>>> >>>> Pitch ’n time is the industry go to plug for TCE and key >>>> Manipulation >>>> The company is Serato. >>>> In 11 when the plug-in window is open, >>>> Interact with the >>>> plug-in parameter and all of it is accessible… >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Pitch 'n time
Mike, Thanks for the info but to be sure, can one move in shorter increments in cents? Meaning I want to move smaller then semi tones 50 cents. Take care, John > On Jan 19, 2015, at 4:25 PM, Mike Lockett wrote: > > Hey John, > Its in PT10 where you have to use short cut keys to move semitones. > ; > Theres know shortcut to move cents. > But in PT11 the parameters can be control by V-O. > When the plug-in window is open, interact with plug-in view, > go to output percent view interact with it, > V-O up or down to change the cents. > Hope this helps. > > On Jan 19, 2015, at 6:50 AM, John Gunn wrote: > >> Mike, >> >> Can youy also instead of semi tones change in cents value as well? >> >> John >> >> >>> On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: >>> >>> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >>> It works with Pro tools 10.3.5 and higher. >>> It's only accessible with 11.1 and higher with voice over. >>> Although in ten three there are some short cut keys that you can use for >>> Example >>> >>> To change pitch one semitone use the control up or down arrow depending on >>> the direction you need to go. >>> For time contraction or expansion use control and left or >>> rright arrow. thesecommands work any where the plug-in window is open >>> >>> Pitch ’n time is the industry go to plug for TCE and key >>> Manipulation >>> The company is Serato. >>> In 11 when the plug-in window is open, >>> Interact with the >>> plug-in parameter and all of it is accessible… >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Pitch 'n time
Hey John, Its in PT10 where you have to use short cut keys to move semitones. ; Theres know shortcut to move cents. But in PT11 the parameters can be control by V-O. When the plug-in window is open, interact with plug-in view, go to output percent view interact with it, V-O up or down to change the cents. Hope this helps. On Jan 19, 2015, at 6:50 AM, John Gunn wrote: > Mike, > > Can youy also instead of semi tones change in cents value as well? > > John > > >> On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: >> >> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >> It works with Pro tools 10.3.5 and higher. >> It's only accessible with 11.1 and higher with voice over. >> Although in ten three there are some short cut keys that you can use for >> Example >> >> To change pitch one semitone use the control up or down arrow depending on >> the direction you need to go. >> For time contraction or expansion use control and left or >> rright arrow. thesecommands work any where the plug-in window is open >> >> Pitch ’n time is the industry go to plug for TCE and key >> Manipulation >> The company is Serato. >> In 11 when the plug-in window is open, >> Interact with the >> plug-in parameter and all of it is accessible… >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Pitch 'n time
Hi John, Yes, Pitch'n'Time supports changes in cents by default. Slau On Jan 19, 2015, at 7:50 AM, John Gunn wrote: > Mike, > > Can youy also instead of semi tones change in cents value as well? > > John > > >> On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: >> >> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >> It works with Pro tools 10.3.5 and higher. >> It's only accessible with 11.1 and higher with voice over. >> Although in ten three there are some short cut keys that you can use for >> Example >> >> To change pitch one semitone use the control up or down arrow depending on >> the direction you need to go. >> For time contraction or expansion use control and left or >> rright arrow. thesecommands work any where the plug-in window is open >> >> Pitch ’n time is the industry go to plug for TCE and key >> Manipulation >> The company is Serato. >> In 11 when the plug-in window is open, >> Interact with the >> plug-in parameter and all of it is accessible… >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Pitch 'n time
Mike, Can youy also instead of semi tones change in cents value as well? John > On Jan 15, 2015, at 2:43 PM, Mike Lockett wrote: > > Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” > It works with Pro tools 10.3.5 and higher. > It's only accessible with 11.1 and higher with voice over. > Although in ten three there are some short cut keys that you can use for > Example > > To change pitch one semitone use the control up or down arrow depending on > the direction you need to go. > For time contraction or expansion use control and left or > rright arrow. thesecommands work any where the plug-in window is open > > Pitch ’n time is the industry go to plug for TCE and key > Manipulation > The company is Serato. > In 11 when the plug-in window is open, > Interact with the > plug-in parameter and all of it is accessible… > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Pitch 'n time
Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” It works with Pro tools 10.3.5 and higher. It's only accessible with 11.1 and higher with voice over. Although in ten three there are some short cut keys that you can use for Example To change pitch one semitone use the control up or down arrow depending on the direction you need to go. For time contraction or expansion use control and left or rright arrow. thesecommands work any where the plug-in window is open Pitch ’n time is the industry go to plug for TCE and key Manipulation The company is Serato. In 11 when the plug-in window is open, Interact with the plug-in parameter and all of it is accessible… -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.