Re: Need help from an expert or two regarding Arturia Cs-80V under Pro tools for Mac v9
Hi, You should use a controller then using VoiceOver find the parameters you want to change and mark a hotspot and have VoiceOver monitor the hot spot. Now grab some faders on the controller and when "strike Gold" :) voiceover will announce the parameter being changed. Make sure to document the faders that work for your plug. CHUCK REICHEL soundpicturerecord...@gmail.com www.SoundPictureRecording.com 954-742-0019 GUFFAWING :) In GOD I Trust On Feb 2, 2013, at 11:57 AM, Slau Halatyn wrote: > Hi Krister, > > I think there were some issues with third party plug-ins where it appeared > that parameters weren't being changed when in fact they were. If I'm not > mistaken, this was the case with Waves plug-ins. Some things you might want > to try: > > Interact with a parameter and change its value using VO+left and right > arrows. Turn off VoiceOver and turn it back on and check the value. Try > closing the plug-ins window and reopen it and check the value. Maybe some > folks using Waves plug-ins can chime in about their experiences. > > Slau > > On Feb 2, 2013, at 5:31 AM, Krister Ekstrom wrote: > >> Hi there. >> I downloaded a trial version of the softsynth CS-80V from Arturia in the >> hopes that i could modify and make own sounds using it as a plugin under Pro >> Tools. As expected, using it as a stand-alone synth didn't work at all with >> Voiceover but when using it as a plug under Pro tools i was able to see the >> parameters, presets and the like, but here is where i need help from >> experienced folks. It looks as though you can see the parameters and their >> values, but you can't change them at all. Interacting with the parameters >> and trying to move the arrows up and down don't seem to do anything, the >> value remains set as it was when first entering the plugin. >> Is this common and is there a workaround for such occations? >> Thanks in advance for any help. >> /Krister >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Need help from an expert or two regarding Arturia Cs-80V under Pro tools for Mac v9
ON another note, VO does not sometimes report the correct value while you're changing the parameter for non-third party plugins. One example top of my head is model parameter in mini grand. When you interact with the parameter and move VO cursor to change the value, it will say the value. However, when you stop interact with the parameter, and read the value, it'll report something different than what you heard last time. Running pt10.1 on Lion. Chi On 2/2/2013 11:57 AM, Slau Halatyn wrote: Hi Krister, I think there were some issues with third party plug-ins where it appeared that parameters weren't being changed when in fact they were. If I'm not mistaken, this was the case with Waves plug-ins. Some things you might want to try: Interact with a parameter and change its value using VO+left and right arrows. Turn off VoiceOver and turn it back on and check the value. Try closing the plug-ins window and reopen it and check the value. Maybe some folks using Waves plug-ins can chime in about their experiences. Slau On Feb 2, 2013, at 5:31 AM, Krister Ekstrom wrote: Hi there. I downloaded a trial version of the softsynth CS-80V from Arturia in the hopes that i could modify and make own sounds using it as a plugin under Pro Tools. As expected, using it as a stand-alone synth didn't work at all with Voiceover but when using it as a plug under Pro tools i was able to see the parameters, presets and the like, but here is where i need help from experienced folks. It looks as though you can see the parameters and their values, but you can't change them at all. Interacting with the parameters and trying to move the arrows up and down don't seem to do anything, the value remains set as it was when first entering the plugin. Is this common and is there a workaround for such occations? Thanks in advance for any help. /Krister -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Need help from an expert or two regarding Arturia Cs-80V under Pro tools for Mac v9
Hi, Ok, let's hope it'll be compatible with the Akai MPK61, i think the name of the midi keyboard was that i wonted... That is if anyone doesn't recommend anything better. /Krister 3 feb 2013 kl. 22:47 skrev Stephen Martin : > If memory serves correct waves users have to use a control surface to change > values u sing a control surface. > On Feb 2, 2013, at 11:57 AM, Slau Halatyn wrote: > >> Hi Krister, >> >> I think there were some issues with third party plug-ins where it appeared >> that parameters weren't being changed when in fact they were. If I'm not >> mistaken, this was the case with Waves plug-ins. Some things you might want >> to try: >> >> Interact with a parameter and change its value using VO+left and right >> arrows. Turn off VoiceOver and turn it back on and check the value. Try >> closing the plug-ins window and reopen it and check the value. Maybe some >> folks using Waves plug-ins can chime in about their experiences. >> >> Slau >> >> On Feb 2, 2013, at 5:31 AM, Krister Ekstrom wrote: >> >>> Hi there. >>> I downloaded a trial version of the softsynth CS-80V from Arturia in the >>> hopes that i could modify and make own sounds using it as a plugin under >>> Pro Tools. As expected, using it as a stand-alone synth didn't work at all >>> with Voiceover but when using it as a plug under Pro tools i was able to >>> see the parameters, presets and the like, but here is where i need help >>> from experienced folks. It looks as though you can see the parameters and >>> their values, but you can't change them at all. Interacting with the >>> parameters and trying to move the arrows up and down don't seem to do >>> anything, the value remains set as it was when first entering the plugin. >>> Is this common and is there a workaround for such occations? >>> Thanks in advance for any help. >>> /Krister >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Need help from an expert or two regarding Arturia Cs-80V under Pro tools for Mac v9
If memory serves correct waves users have to use a control surface to change values u sing a control surface. On Feb 2, 2013, at 11:57 AM, Slau Halatyn wrote: > Hi Krister, > > I think there were some issues with third party plug-ins where it appeared > that parameters weren't being changed when in fact they were. If I'm not > mistaken, this was the case with Waves plug-ins. Some things you might want > to try: > > Interact with a parameter and change its value using VO+left and right > arrows. Turn off VoiceOver and turn it back on and check the value. Try > closing the plug-ins window and reopen it and check the value. Maybe some > folks using Waves plug-ins can chime in about their experiences. > > Slau > > On Feb 2, 2013, at 5:31 AM, Krister Ekstrom wrote: > >> Hi there. >> I downloaded a trial version of the softsynth CS-80V from Arturia in the >> hopes that i could modify and make own sounds using it as a plugin under Pro >> Tools. As expected, using it as a stand-alone synth didn't work at all with >> Voiceover but when using it as a plug under Pro tools i was able to see the >> parameters, presets and the like, but here is where i need help from >> experienced folks. It looks as though you can see the parameters and their >> values, but you can't change them at all. Interacting with the parameters >> and trying to move the arrows up and down don't seem to do anything, the >> value remains set as it was when first entering the plugin. >> Is this common and is there a workaround for such occations? >> Thanks in advance for any help. >> /Krister >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Need help from an expert or two regarding Arturia Cs-80V under Pro tools for Mac v9
Hi Krister, I think there were some issues with third party plug-ins where it appeared that parameters weren't being changed when in fact they were. If I'm not mistaken, this was the case with Waves plug-ins. Some things you might want to try: Interact with a parameter and change its value using VO+left and right arrows. Turn off VoiceOver and turn it back on and check the value. Try closing the plug-ins window and reopen it and check the value. Maybe some folks using Waves plug-ins can chime in about their experiences. Slau On Feb 2, 2013, at 5:31 AM, Krister Ekstrom wrote: > Hi there. > I downloaded a trial version of the softsynth CS-80V from Arturia in the > hopes that i could modify and make own sounds using it as a plugin under Pro > Tools. As expected, using it as a stand-alone synth didn't work at all with > Voiceover but when using it as a plug under Pro tools i was able to see the > parameters, presets and the like, but here is where i need help from > experienced folks. It looks as though you can see the parameters and their > values, but you can't change them at all. Interacting with the parameters and > trying to move the arrows up and down don't seem to do anything, the value > remains set as it was when first entering the plugin. > Is this common and is there a workaround for such occations? > Thanks in advance for any help. > /Krister > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
