[Qgis-user] Open Layers plugin
Sorry for the earlier note. I found it. It was just moved to a different place in the menu. Thanks Chuck ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Copy and Paste Features not bringing in attributes
Hello, I have save as a layer to a new name and then deleted all the features it had then I select the features that I want from the original file and copy and paste them into the new file but even though they are the exact same structure and field names everything other than the geometry comes in as NULL. Any ideas why the data from the fields (other than geometry) are not pasting in? Thank you. Tom Leahy ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Copy and Paste Features not bringing in attributes
Hmm, ok I noticed something like this today too. I selected the polygons from the first layer and saved them in a new layer. But I accidentally missed selecting a couple, so I copied and pasted them from the old layer into the new one. They showed up with null for the attributes. Null on pasting. Null after saving. Null after closing and reopen info the attribute table. Didn't have more time to play with it so I redid the selection properly and saved it over again. -ramon. On 30 Apr 2015, at 15:53, Bernhard Ströbl bernhard.stro...@jena.de wrote: Hi, why don't you just save the selected features as new layer in the first place? To your question: Did you save the changes and reopen the attribute table? I seem to remember that new features' attributes are shown as NULL if you examine them in the still open table. Bernhard Am 30.04.2015 09:43, schrieb Leahy, Thomas A.: Hello, I have save as a layer to a new name and then deleted all the features it had then I select the features that I want from the original file and copy and paste them into the new file but even though they are the exact same structure and field names everything other than the geometry comes in as NULL. Any ideas why the data from the fields (other than geometry) are not pasting in? Thank you. Tom Leahy __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] show labels only, if objects are activated/visible
Hi Bernhard, Yes - we sort of have rule based labeling with the data-defined properties and conditions. But for very complex labeling it is a bit hard to track. The rules are so distributed in different places/properties that it is hard to get an overview what is really going on. I mean the UI of the rule-based symbology is nicer and allows to change multiple graphical properties of the same rule at once. There is certainly room for improvements. A coupling of rendering and labeling would be quite interesting (esp. for the case Otto is mentioning where users want to selectively enable/disable rules/categories), I think - but I don't know if it is technically solvable (or how hard it is). Andreas On 30.04.2015 10:37, Bernhard Ströbl wrote: Hi Andreas, don't we have rule-based labelling? CASE WHEN condition THEN 'bla' ELSE 'blub' END Problem is that you may have to rewrite all the rules that you already have written in the rule-based style. Bernhard Am 30.04.2015 10:21, schrieb Andreas Neumann: Hi Otto, I don't think that this is possible. As far as I know the labeling is totally disconnected from the symbology. Only global filters on the whole layer (the filter in the general tab in the layer properties) is honored by both labeling and the rest of the symbology. The rest is totally disconnected. I can see value in what you want, but I doubt it is easily possible. It would also help if we would have rule based labeling, so we could at least apply similar rules to the labels as we apply to the symbology of features. Larry probably knows more about that. Andreas On 30.04.2015 09:44, Otto Dassau wrote: Hi, is it possible to show labels only, if the objects are activated/visible? I use the rule based renderer with two nested rules, both categorized rendering, like: Cat 1 # Road 1 Cat 2 ## |_ Lukas |_ Frank |_ Markus |_ Georg Road 2 |_ John |_ Leo |_ Herbert If I deactivate labeling for some values in the first categorized rendering (Cat 1), objects and labels are invisible. But if I deactivate labeling for some values in the second categorized rendering (Cat 2), objects are invisible but labels are still shown. Is there a way how to solve this in the rule based renderer? Thanks a lot Otto __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] How to define which CRS to use?
Hi Nicolas, thanks for your input. To my knowledge, feet where never used as a unit in former Soviet Union. I di’d’nt know that there were crs’ses in feet at all. I will give it a try. thanks Joris Op 29-apr.-2015, om 23:38 heeft Nicolas Cadieux nicolas.cadi...@archeotec.ca het volgende geschreven: What if the coordinate where in feet instead of meters? Where does that put you? I would also look at local coordinate systems to see what they use. Nicolas Cadieux M.Sc. Les Entreprises Archéotec inc. 8548, rue Saint-Denis Montréal H2P 2H2 Téléphone: 514.381.5112 Fax: 514.381.4995 www.archeotec.ca On Apr 29, 2015 12:14 PM, Joris Hintjens [via OSGeo.org] [hidden email] x-msg://2/user/SendEmail.jtp?type=nodenode=5203573i=0 wrote: Hello, I have a csv file with a list of coordinates. for example one of them: X Y 12374462.4355 4877977.8396 notice the (to me at least) strange X coordinate: in the 12millon range. I know the point should land somewhere near the Kazach town of Shalkya, with coordinates in the EPSG3857 (WGS 84 pseudo mercator) of +/- X: 750800 Y: 5472000 If I start at 0 lat and 0 long, I’m off about 5000KM. How can I define which sourceCRS to use? How to treat this dataset for further use? Thanks for any suggestion. Joris ___ Qgis-user mailing list a href=/user/SendEmail.jtp?type#61;nodeamp;node#61;5203528amp;i#61;0[hidden email] http://lists.osgeo.org/mailman/listinfo/qgis-user http://lists.osgeo.org/mailman/listinfo/qgis-user If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.x6.nabble.com/How-to-define-which-CRS-to-use-tp5203528.html http://osgeo-org.1560.x6.nabble.com/How-to-define-which-CRS-to-use-tp5203528.html To start a new topic under Quantum GIS - User, email ml-node+s1560n4125267...@n6.nabble.com To unsubscribe from Quantum GIS - User, a href=http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?macro#61;unsubscribe_by_codeamp;node#61;4125267amp;code#61;bmljb2xhcy5jYWRpZXV4QGFyY2hlb3RlYy5jYXw0MTI1MjY3fDYzNDQ4MjQxNg#61;#61;;click here. a href=http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?macro#61;macro_vieweramp;id#61;instant_html%21nabble%3Aemail.namlamp;base#61;nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespaceamp;breadcrumbs#61;notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml; style=font:9px serifNAML View this message in context: Re: How to define which CRS to use? http://osgeo-org.1560.x6.nabble.com/How-to-define-which-CRS-to-use-tp5203528p5203573.html Sent from the Quantum GIS - User mailing list archive http://osgeo-org.1560.x6.nabble.com/Quantum-GIS-User-f4125267.html at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] show labels only, if objects are activated/visible
Hi Andreas, I agree, the UI is much nicer and it would be great to have a similar one for the labels where you define a rule and then set text color, halo etc. for this case (and even the label text itself). Currently you have to click into data-defined properties and reenter the same rule at several places. Yes the coupling of geometry rendering and labelling would be good to have. Currently features are labeled even if the are covered by other features. No idea how much effect this would have on the rendering speed. Bernhard Am 30.04.2015 10:50, schrieb Andreas Neumann: Hi Bernhard, Yes - we sort of have rule based labeling with the data-defined properties and conditions. But for very complex labeling it is a bit hard to track. The rules are so distributed in different places/properties that it is hard to get an overview what is really going on. I mean the UI of the rule-based symbology is nicer and allows to change multiple graphical properties of the same rule at once. There is certainly room for improvements. A coupling of rendering and labeling would be quite interesting (esp. for the case Otto is mentioning where users want to selectively enable/disable rules/categories), I think - but I don't know if it is technically solvable (or how hard it is). Andreas On 30.04.2015 10:37, Bernhard Ströbl wrote: Hi Andreas, don't we have rule-based labelling? CASE WHEN condition THEN 'bla' ELSE 'blub' END Problem is that you may have to rewrite all the rules that you already have written in the rule-based style. Bernhard Am 30.04.2015 10:21, schrieb Andreas Neumann: Hi Otto, I don't think that this is possible. As far as I know the labeling is totally disconnected from the symbology. Only global filters on the whole layer (the filter in the general tab in the layer properties) is honored by both labeling and the rest of the symbology. The rest is totally disconnected. I can see value in what you want, but I doubt it is easily possible. It would also help if we would have rule based labeling, so we could at least apply similar rules to the labels as we apply to the symbology of features. Larry probably knows more about that. Andreas On 30.04.2015 09:44, Otto Dassau wrote: Hi, is it possible to show labels only, if the objects are activated/visible? I use the rule based renderer with two nested rules, both categorized rendering, like: Cat 1 # Road 1 Cat 2 ## |_ Lukas |_ Frank |_ Markus |_ Georg Road 2 |_ John |_ Leo |_ Herbert If I deactivate labeling for some values in the first categorized rendering (Cat 1), objects and labels are invisible. But if I deactivate labeling for some values in the second categorized rendering (Cat 2), objects are invisible but labels are still shown. Is there a way how to solve this in the rule based renderer? Thanks a lot Otto __ Information from ESET Mail Security, version of virus signature database 11556 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] show labels only, if objects are activated/visible
Hi Otto, I don't think that this is possible. As far as I know the labeling is totally disconnected from the symbology. Only global filters on the whole layer (the filter in the general tab in the layer properties) is honored by both labeling and the rest of the symbology. The rest is totally disconnected. I can see value in what you want, but I doubt it is easily possible. It would also help if we would have rule based labeling, so we could at least apply similar rules to the labels as we apply to the symbology of features. Larry probably knows more about that. Andreas On 30.04.2015 09:44, Otto Dassau wrote: Hi, is it possible to show labels only, if the objects are activated/visible? I use the rule based renderer with two nested rules, both categorized rendering, like: Cat 1 # Road 1 Cat 2 ## |_ Lukas |_ Frank |_ Markus |_ Georg Road 2 |_ John |_ Leo |_ Herbert If I deactivate labeling for some values in the first categorized rendering (Cat 1), objects and labels are invisible. But if I deactivate labeling for some values in the second categorized rendering (Cat 2), objects are invisible but labels are still shown. Is there a way how to solve this in the rule based renderer? Thanks a lot Otto ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Extract raster cell-value statistics (min, max, count, sum) within a polygone
Thanx Micha Silver :) Worked now after setting region S and W and also change resolution to what the raster had. :) 2015-04-29 18:44 GMT+02:00 Micha Silver mi...@arava.co.il: On 04/29/2015 03:15 PM, Johan Nilsson wrote: Have now tried to run v.rast.stats in Grass 7.0. It start and run 100% off one core in hours, until a file in ~/grassdata/location/PERMANENT/.tmp/ inflate to the disk is full, approximate 150GB :( Whoa! Check the region settings before you try again: g.region -p This is FAQ #0 for all work with GRASS. The v.rast.stats module works by first rasterizing the vector polygons into a temporary raster. If you region is very large, and resolution setting is very small, you might be getting a huge temporary raster. Have made topology check on the vector-data and imported it to grassdb. Will see if I can collect usefull data and ask on grass-user list. Stupid Ubuntu 14.04 to not messure invisible files in the normal file-manager, had gone faster to pinpoint the problem. /Cheers 2015-04-19 18:54 GMT+02:00 Micha Silver mi...@arava.co.il: On 04/19/2015 12:34 PM, Johan Nilsson wrote: Zonal statistics work well to extract, numers of cells(counts) , sum of the value (sum) and also average (mean) But I want the minimum AND max-value and also standard error, if possible. Is there another plugin or a tutorial how it may bee done in another way. The GRASS module v.rast.stats does what you want. But it's not in the Processing toolbox. You can import your raster into a GRASS mapset then do the analysis directly within GRASS. The code to Zonal statistics are here, but I'm total lost in how it work. https://github.com/qgis/QGIS/blob/a2f51260db5357917e86b78f1bb2915379d670dd/src/analysis/vector/qgszonalstatistics.cpp /Cheers This mail was received via Mail-SeCure System. ___ Qgis-user mailing listQgis-user@lists.osgeo.orghttp://lists.osgeo.org/mailman/listinfo/qgis-user This mail was received via Mail-SeCure System. This mail was received via Mail-SeCure System. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] 2.6 can't access Open Layers plugin
in earlier versions of QGIS I have used the plugin to add aerial map background and for digitizing to correct the Tiger files road data but now it doesn't show up as s selection in the drop down. What can I do to get it back? Or is there a problem with 2.6.1 and Open Layers? Thanks! Chuck ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Bulk] How to define which CRS to use?
Thanks a lot, Jean, great tool, alas, my coordinates do not appear. I will keep the bookmark, that’s for sure! Joris Op 30-apr.-2015, om 09:00 heeft Tijan49 tija...@yahoo.fr het volgende geschreven: Hello, What about using this tool : http://dogeo.fr/_apps/projection/ You point the place you know (the Kazak town), and it gives you all the possible coordinates in different CRS ... Hope it helps ... Jean Allorent Le 29/04/2015 18:16, Joris Hintjens a écrit : Hello, I have a csv file with a list of coordinates. for example one of them: XY 12374462.43554877977.8396 notice the (to me at least) strange X coordinate: in the 12millon range. I know the point should land somewhere near the Kazach town of Shalkya, with coordinates in the EPSG3857 (WGS 84 pseudo mercator) of +/- X: 750800 Y: 5472000 If I start at 0 lat and 0 long, I’m off about 5000KM. How can I define which sourceCRS to use? How to treat this dataset for further use? Thanks for any suggestion. Joris ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Copy and Paste Features not bringing in attributes
Hi, why don't you just save the selected features as new layer in the first place? To your question: Did you save the changes and reopen the attribute table? I seem to remember that new features' attributes are shown as NULL if you examine them in the still open table. Bernhard Am 30.04.2015 09:43, schrieb Leahy, Thomas A.: Hello, I have save as a layer to a new name and then deleted all the features it had then I select the features that I want from the original file and copy and paste them into the new file but even though they are the exact same structure and field names everything other than the geometry comes in as NULL. Any ideas why the data from the fields (other than geometry) are not pasting in? Thank you. Tom Leahy __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] show labels only, if objects are activated/visible
Hi, is it possible to show labels only, if the objects are activated/visible? I use the rule based renderer with two nested rules, both categorized rendering, like: Cat 1 # Road 1 Cat 2 ## |_ Lukas |_ Frank |_ Markus |_ Georg Road 2 |_ John |_ Leo |_ Herbert If I deactivate labeling for some values in the first categorized rendering (Cat 1), objects and labels are invisible. But if I deactivate labeling for some values in the second categorized rendering (Cat 2), objects are invisible but labels are still shown. Is there a way how to solve this in the rule based renderer? Thanks a lot Otto ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] How to define which CRS to use?
Am 29.04.2015 um 18:16 schrieb Joris Hintjens: X Y 12374462.4355 4877977.8396 I know the point should land somewhere near the Kazach town of Shalkya, with coordinates in the EPSG3857 (WGS 84 pseudo mercator) of +/- X: 750800 Y: 5472000 EPSG:28412? found with http://epsg.io/?q=Kazakhstan on page 3 HTH, Redoute ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] show labels only, if objects are activated/visible
Hi Andreas, don't we have rule-based labelling? CASE WHEN condition THEN 'bla' ELSE 'blub' END Problem is that you may have to rewrite all the rules that you already have written in the rule-based style. Bernhard Am 30.04.2015 10:21, schrieb Andreas Neumann: Hi Otto, I don't think that this is possible. As far as I know the labeling is totally disconnected from the symbology. Only global filters on the whole layer (the filter in the general tab in the layer properties) is honored by both labeling and the rest of the symbology. The rest is totally disconnected. I can see value in what you want, but I doubt it is easily possible. It would also help if we would have rule based labeling, so we could at least apply similar rules to the labels as we apply to the symbology of features. Larry probably knows more about that. Andreas On 30.04.2015 09:44, Otto Dassau wrote: Hi, is it possible to show labels only, if the objects are activated/visible? I use the rule based renderer with two nested rules, both categorized rendering, like: Cat 1 # Road 1 Cat 2 ## |_ Lukas |_ Frank |_ Markus |_ Georg Road 2 |_ John |_ Leo |_ Herbert If I deactivate labeling for some values in the first categorized rendering (Cat 1), objects and labels are invisible. But if I deactivate labeling for some values in the second categorized rendering (Cat 2), objects are invisible but labels are still shown. Is there a way how to solve this in the rule based renderer? Thanks a lot Otto __ Information from ESET Mail Security, version of virus signature database 11555 (20150430) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] How to define which CRS to use?
BINGO! thanks a lot, Redoute. Seems correct. How did you do that, just trial and error until something came up? Or did you follow a certain logic? ever grateful, Joris Op 30-apr.-2015, om 10:18 heeft Redoute redo...@tortenboxer.de het volgende geschreven: Am 29.04.2015 um 18:16 schrieb Joris Hintjens: XY 12374462.43554877977.8396 I know the point should land somewhere near the Kazach town of Shalkya, with coordinates in the EPSG3857 (WGS 84 pseudo mercator) of +/- X: 750800 Y: 5472000 EPSG:28412? found with http://epsg.io/?q=Kazakhstan on page 3 HTH, Redoute ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] differences between QGIS under KDE and GNOME for user manual 2.8
Hello for the user manual I'd like to check the diffences of the QGIS GUI between KDE and GNOME. We have a paragraph for this in qgis_gui.rst. Can you help me by having a look at this? Maybe the information is still up to date, I have no idea (-; Is there someone who uses QGIS 2.8 under GNOME GUI? Anyway I can write the *.rst-file and just need updated information about the QGIS GUI under GNOME. Thanks. Cheers, Larissa ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS 2.6.1 Brighton and GeoJSON CRS 2770
Hi
I have three geojson files.
File #1 is in 4326 and has the following crs :
crs:
{
type: link,
properties:
{
href:
http://www.opengis.net/def/crs/EPSG/0/4326;,
type: proj4
}
},
File #2 is in 27700 and has the following crs:
crs:
{
type: name,
properties:
{
name: EPSG:27700
}
},
File #3 is identical to File #2 except for the crs which is
crs:
{
type: link,
properties:
{
href: http://www.opengis.net/def/crs/EPSG/0/27700;,
type: proj4
}
},
File #1 and #2 load into QGIS and display as I would expect.
File #3 loads but does not display. While its properties shows an extent in BNG
xMin,yMin 476285.30,230902.30 : xMax,yMax 496530.40,256158.20
the layer spatial reference system shows:
+proj=longlat +datum=WGS84 +no_defs
I suspect what's going on is that the link type crs is ignored and QGIS
defaults make it ok - but with the link crs in File #3 it goes kerplooie...
Any thoughts?
Much appreciated
Paul
Paul Cleverley
Software Developer, Hydrodynamics Metocean
E: p.clever...@hrwallingford.commailto:p.clever...@hrwallingford.com
T: +44 (0)1491 822483
http://www.hrwallingford.com/banner.html
[HR Wallingford Logo]
HR Wallingford
Howbery Park, Wallingford, Oxfordshire OX10 8BA, United Kingdom
T: +44 (0)1491 835381 F: +44 (0)1491 832233
www.hrwallingford.com
[HR Wallingford Secondary Logo]
HR Wallingford and its subsidiaries uses faxes and emails for confidential and
legally privileged business communications. They do not of themselves create
legal commitments. Disclosure to parties other than addressees requires our
specific consent. We are not liable for unauthorised disclosures nor reliance
upon them.
If you have received this message in error please advise us immediately and
destroy all copies of it.
HR Wallingford Limited
Howbery Park, Wallingford, Oxfordshire, OX10 8BA, United Kingdom
Registered in England No. 02562099
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] How to define which CRS to use?
Date: Thu, 30 Apr 2015 16:27:42 +0200 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 Hamster/2.1.0.1538 In-Reply-To: 91c621a7-67ec-4b94-8d98-a47e770ea...@gmail.com Am 29.04.2015 um 18:16 schrieb Joris Hintjens: Hello, I have a csv file with a list of coordinates. for example one of them: X Y 12374462.4355 4877977.8396 notice the (to me at least) strange X coordinate: in the 12millon range. This might be a false Easting. In the Soviet Union, 3-degree or 6-degree Gauss-Krueger systems based on the Pulkovo datum were common. To distinguish the zones, a high value of false Easting was added. I know the point should land somewhere near the Kazach town of Shalkya, with coordinates in the EPSG3857 (WGS 84 pseudo mercator) of +/- X: 750800 Y: 5472000 These coordinates end up in the South of France for me. There might be one digit missing for the Easting. Greetings, André Joost ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [QGIS-UX] QGIS fonts in print composer
Hi Sarah, I'm afraid this does not seem like a question for the usability mailing list. Please use the user mailing list for problems relating to the use of certain QGIS features. Also, can you provide the font you mentioned for debugging purposes? Best wishes, Anita On Thu, Apr 30, 2015 at 8:25 PM, Sarah Van Vliet sarah...@gmail.com wrote: Hi qgis community, My team and I are having trouble with fonts in qgis print composer. we all have various versions as we all joined at different times. ( i use 2.4.0, while one other colleague uses 2.6.1, etc. ). We use a font set called Clan Pro, and only some of the fonts work at any given font size. What's more, which fonts work and don't seems to vary amongst all of us! does anybody know a solution? is there some version of qgis where fonts are better functioning? Thanks, Sarah ___ QGIS-UX mailing list qgis...@lists.osgeo.org http://lists.osgeo.org/cgi-bin/mailman/listinfo/qgis-ux ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Add mssql non-geometric tables
Hi Does anybody know how to add a non-geometric table from an mssql database to a qgis project? Do I need to add it in the table geometry_columns? If yes what would be the appropriate attribute values there? Thanks Peter Schürch -- Meier und Partner AG Freiestrasse 26x-apple-data-detectors://1/0 8570 Weinfeldenx-apple-data-detectors://1/0 www.meierpartner.chhttp://www.meierpartner.ch/ T +41 71 626 5115tel:+41%2071%20626%205115 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Field expression for file name?
Hi, I am building an index of a LiDar project (using .las files). I can use lasboundary.exe to create .shp boundary polygon for each individual file (using the merge option will only create one big polygon). I can then use vector/data management tools/merge the shapefile to one to make one file. The problem is I need a field (the file names) for each polygon. Is there an field expression for this? This field is not created by lasboundary or my merge the shapefile to one. Perhaps I can use the Advanced Python field calculator in batch mode in the processing plugin but I don't know how to return the files names. Can someone help or give my and idea of how to proceed? Thanks in advance Nicolas ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Problem with loading layers from a project
I'm trying to load a project via python (original project and the single
shp file (the extension should be .zip), along with the project after
saving, are attached). When I load the project, there are no layers,
and if I write the project out, it doesn't contain the original layer
either.
Python transcript:
jim@lilith {+81% } Fri 2015-05-01 01:16:00 0
/home/jim/Desktop/test
% export PYTHONPATH=/usr/share/qgis/python
jim@lilith {+82% } Fri 2015-05-01 01:16:02 0
/home/jim/Desktop/test
% python
Python 2.7.6 (default, Mar 22 2014, 22:59:56)
[GCC 4.8.2] on linux2
Type help, copyright, credits or license for more information.
from qgis.core import QgsProject
from PyQt4.QtCore import QFileInfo
project = QgsProject.instance()
project.read(QFileInfo('test.qgs'))
True
map(lambda i: i.name(), project.layerTreeRoot().children())
[]
project.write()
True
Before and After sizes:
jim@lilith {+81% } Fri 2015-05-01 01:15:14 0
/home/jim/Desktop/test
% ls -l test.qgs
-rw-rw-r-- 1 jim jim 14222 May 1 01:15 test.qgs
jim@lilith {+82% } Fri 2015-05-01 01:16:20 0
/home/jim/Desktop/test
% ls -l test.qgs
-rw-rw-r-- 1 jim jim 1654 May 1 01:17 test.qgs
I'm sure (or at least hope!) that I'm just doing something little (and
non-obvious?) wrong.
As an aside: this is a condensed test. If you add a group into the
project, the group will show up in the layer list and will be written
back out, but no other layers will be found.
Thank you,
Jim
PS:
contents of PYTHONPATH, in case I'm not using the right location
jim@lilith {+90% } Fri 2015-05-01 01:28:05 0
/home/jim/Desktop/test
% ls -l $PYTHONPATH
total 20
drwxr-xr-x 2 root root 4096 Feb 26 10:46 console/
drwxr-xr-x 6 root root 4096 Feb 26 10:46 owslib/
drwxr-xr-x 7 root root 4096 Aug 20 2014 plugins/
drwxr-xr-x 2 root root 4096 Feb 26 10:46 pyplugin_installer/
drwxr-xr-x 2 root root 4096 Feb 26 10:46 qsci_apis/
I had seen somewhere about doing QgsApplication.initQgis(), so I gave
that a shot:
% python
Python 2.7.6 (default, Mar 22 2014, 22:59:56)
[GCC 4.8.2] on linux2
Type help, copyright, credits or license for more information.
from qgis.core import QgsApplication
from qgis.core import QgsProject
from PyQt4.QtCore import QFileInfo
QgsApplication.setPrefixPath('/usr/share/qgis', True)
QgsApplication.initQgis()
project = QgsProject.instance()
project.read(QFileInfo('test.qgs'))
True
map(lambda i: i.name(), project.layerTreeRoot().children())
[]
to no avail :(
test.qgs
Description: application/qgis-project
Hospitals.really-a-zip
Description: Zip archive
+proj=longlat +datum=WGS84 +no_defs
EPSG:4326
3452
false
0
255
255
255
255
255
255
2
current_layer
off
0
2
true
false
signature.asc
Description: OpenPGP digital signature
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
