[Qgis-user] QGIS WMS Provider is adding a BGCOLOR parameter ?

[Andrea Peri]

Hi,

Is the "wms provider" adding always a parameter BGCOLOR=0xFF to
every GetMap request ?

I notice my maps have all the white color transparent.
I don't understand f it is a default of my wms server or is a hidden
parameter added by QGIS client.

Thx,
A.

-- 
-
Andrea Peri
. . . . . . . . .
qwerty àèìòù
-
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Lene Fischer]

Hi Piotr,
If your only purpose is to find holes in the forest, you can do it using 
satellite images with a high resolution. And then digitizing...
Buying a drone is easy - but flying a drone takes time, experience, time, try 
and error, learning about regulations ect ect...

You can get so much more information from aerial images captured by a drone: 
Ortophoto, Surfacemodel, PointCloud and if you use special camera - a 
vegetation index...
From the surface model taken over time, you can calculate growth and canopy 
cover. From a vegetation index (eg. NVDI you can find unhealthy vegetation). 
Ect ect..

In September 2016 there was a conference in Krakow http://sigforestry2016.eu 
just about these topics.

So before you start - you have to consider tree things: Accuracy, area and aim 
for the project.

As others have written - With a copter you don´t fly larger areas pr. Battery. 
With a Phantom 3, on a good day (temp/wind) we fly 15-20 min/battery. 
With a fixed wing you can fly 1-2 hours / battery.
Both can be bought within your budget.

Tips for data collection - read this easy page 
https://www.mapsmadeeasy.com/data_collection
If you want absolute accuracy in 3D  - you need x, y, z Ground Control Points 
-. If you want relative accuracy you need 2D (x, y) GCP.
 
For handeling you images into ortophoto, surface model, point cloud, nvdi ect - 
you can try out a lot of programs. That´s easy - 2-4 weeks free try out. But 
they all cost a lot of money...
You can try out OpenDroneMap. It run on Linux (Try it on a Virtual Machine) - 
It´s OpenSource - And you can pay what you can afford. That´s the beauty of 
Open Source. So remember in your budget to spend some money for the Open Source 
projects too!

And in the end you can use  QGIS for your data: Point Cloud, Raster Calculator, 
HillShade, Raster Colorize, Profile tool, LASTool ect.
We use all these at our campus.

Regards


Lene Fischer
Associate Professor

University of Copenhagen
Department of Geoscience and Natural Resource Management
Forest and Landscape College
Nødebovej 77a
3480 Fredensborg
Denmark


DIR +45 35331579
MOB +45 40115084
l...@ign.ku.dk
www.ign.ku.dk



-Oprindelig meddelelse-
Fra: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] På vegne af Piotr 
Kania
Sendt: 1. december 2016 16:46
Til: qgis-user@lists.osgeo.org
Emne: [Qgis-user] Drones in forestry

Hi!

I'm sorry if my question is out of the main topics - my current employer would 
like to buy drone. They would like to use it for "registration" 
such things as (for example) - small areas without trees in dense forest, that 
were cut (it's not a national park, but normal typical forest -> so here we 
have timber harvest etc.); here is link to Google Maps, that shows what I mean -

https://goo.gl/maps/iEPchbrTYyQ2

Normally I (or someone else) must walk with gps receiver, then digitize that 
"holes" in qgis. The idea is to use drone for that - and here is my question - 
what would you recommend? - I know the max. acceptable price is about 2300 usd, 
but it's better to assume 1200 usd. I think my employer would be already happy 
if such "drone" just make aerial photos that can be used for mapping, I don't 
think that my company would like to have some 3d data (DEM, DSM).

Thanks for any hints


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Noli Sicad]

Hi,

> However, you have to buy as well Photo Scan Pro or Pix4D which very
> expensive USD 3,000 - USD 4,000 for orthomosaicking especially if you
> need DEM.

If you want open source software for aerial photo mosaicking, you can
use ODM. It is not easy to use at the moment.

" OpenDroneMap is an open source toolkit for processing aerial drone
imagery. Typical drones use simple point-and-shoot cameras, so the
images from drones, while from a different perspective, are similar to
any pictures taken from point-and-shoot cameras, i.e. non-metric
imagery. OpenDroneMap turns those simple images into three dimensional
geographic data that can be used in combination with other geographic
datasets"

https://github.com/OpenDroneMap/OpenDroneMap

http://opendronemap.github.io/odm/

Noli
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Thomas Stanley-Jones]

I operate drones in Canada.  I would suggest a Phantom 3 'Professional'.
It will give you a decent range compared to the other versions of the
Phantom 3 ('Standard','Advanced', and '4k'), since it uses Lightbridge for
it's control link and video feedback.  Since it's 2 generations old you
will be able to find them relatively cheaply.  You could use any small
drone as long as it's camera is GPS enabled and it's sending the video back
to the pilot.  That being said, the Mavic is a much better machine for a
good price.  Really small size for what it does and has a better flight
time which would be helpful for your case.  But twice the price of a P3Pro.

I envision your workflow to be:
1. Fly the drone around the perimeter of the area you are mapping, taking
pictures all the way around.  Use the downward facing camera to ensure you
are positioned properly.
2. Use one of QGIS' extensions to import the pictures and create a point
file.
3. Transform using the points to polygons and you've got your areas.

Should work well.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Noli Sicad]

Hi,

I recommend this drone 3DR SOLO with Sony Camera if you have the
budget of USD 2,000 for the drone.

http://www.riseabove.com.au/3dr-solo-mapper-drone-for-mapping

I think I this company is based in Spain.

You can fly this drone to take aerial photos.

30 ha for 21 minutes at 400 ft or 121 meters altitude.

More info on the URL above.

I am in the process of modifying 3DR SOLO to carry 3 action cameras
(not GoPro) for aerial topo mapping and NDVI mapping.

However, you have to buy as well Photo Scan Pro or Pix4D which very
expensive USD 3,000 - USD 4,000 for orthomosaicking especially if you
need DEM.

Multirotor is easy (10x easier) to fly than fixed-wing drone.You need
a training to fly fixed-wing UAV.

Noli

On 12/2/16, Piotr Kania  wrote:
> Hi!
>
> I'm sorry if my question is out of the main topics - my current employer
> would like to buy drone. They would like to use it for "registration"
> such things as (for example) - small areas without trees in dense
> forest, that were cut (it's not a national park, but normal typical
> forest -> so here we have timber harvest etc.); here is link to Google
> Maps, that shows what I mean -
>
> https://goo.gl/maps/iEPchbrTYyQ2
>
> Normally I (or someone else) must walk with gps receiver, then digitize
> that "holes" in qgis. The idea is to use drone for that - and here is my
> question - what would you recommend? - I know the max. acceptable price
> is about 2300 usd, but it's better to assume 1200 usd. I think my
> employer would be already happy if such "drone" just make aerial photos
> that can be used for mapping, I don't think that my company would like
> to have some 3d data (DEM, DSM).
>
> Thanks for any hints
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] DISTANCE TO NEAREST POINT

[Blumentrath, Stefan]

Hi Ricardo,

You could try GRASS module "v.distance" either from Processing or GRASS plugin. 
There you can use the same layer as a and b input and specify a minimum 
distance so you don’t calculate distances between the same geometries in both 
layers. You can also ask for a vector map with the lines that connect the 
points with the closest neighbour...

Cheers
Stefan

-Original Message-
From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Havard 
Tveite
Sent: torsdag 1. desember 2016 12.58
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] DISTANCE TO NEAREST POINT

MMQGIS does not seem to accept the same layer as source and destination.
The NNJoin plugin will calculate the distance to the nearest neighbour and will 
identify it through its attribute values, but will not help you with the 
plotting.

Håvard

On 29. nov. 2016 20:10, Ricardo Thompson wrote:
> Good evening,
>
> I have a vector layer with eight locations and I want to calculate and plot 
> the distance from each point to the nearest among them. I tried to use MMQGIS 
> - Create - Hub distance, but nothing really comes out.
>
> What am I doing wrong?
>
> Thanks!
>
> Ricardo
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>

--
Håvard Tveite
Department of Mathematical Sciences and Technology, NMBU Drøbakveien 31, POBox 
5003, N-1432 Ås, NORWAY
Phone: +47 67231548 Fax: +47 64965401 http://www.nmbu.no/imt/ 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Leknín Řepánek]

Look at this
http://opendronemap.github.io/odm/#

Suite from create outputs from drone/kite/baloon


On Thu, Dec 01, 2016 at 04:55:30PM +, Alejandro Chamizo de Castro wrote:
> 
> Hello Piort,
> 
> In my opinion everything depends on the surface extensions. Flying an 
> extension
> of 500 ha with a multi-rotor drone would be practically unfeasible, would
> consume many batteries, for those surfaces are recommended fixed-wing drones
> capable of flying surfaces up to 1000 ha in a single flight, some have up to 
> an
> hour of autonomy, but these drones are out of your budget, cost more than 2000
> $
> 
> If the surfaces are very extensive, it would be better idea to think of
> satellite images as the colleage said, you could study if you serve the images
> of Sentinel-2, with resolution of 10m, are free.
> 
> ● Enviado con Mailtrack
> *
> 
> 2016-12-01 15:46 GMT+00:00 Piotr Kania :
> 
> Hi!
> 
> I'm sorry if my question is out of the main topics - my current employer
> would like to buy drone. They would like to use it for "registration" such
> things as (for example) - small areas without trees in dense forest, that
> were cut (it's not a national park, but normal typical forest -> so here 
> we
> have timber harvest etc.); here is link to Google Maps, that shows what I
> mean -
> 
> https://goo.gl/maps/iEPchbrTYyQ2
> 
> Normally I (or someone else) must walk with gps receiver, then digitize
> that "holes" in qgis. The idea is to use drone for that - and here is my
> question - what would you recommend? - I know the max. acceptable price is
> about 2300 usd, but it's better to assume 1200 usd. I think my employer
> would be already happy if such "drone" just make aerial photos that can be
> used for mapping, I don't think that my company would like to have some 3d
> data (DEM, DSM).
> 
> Thanks for any hints
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> 
> 
> 
> --
> 
> Logo  Alejandro Chamizo de Castro
> 
>   Analista SIG
> 
>   +34 653681823 · i...@agprecision.es 
> 
>   www.agprecision.es
> 
> 
> eco No me imprimas si no es necesario. Protejamos el medio ambiente
> 
> View Tony Wilson's profile on LinkedIn      [vizualizem]
> WEB: http://www.gisland.es/
> 



> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Alejandro Chamizo de Castro]

Hello Piort,

In my opinion everything depends on the surface extensions. Flying an
extension of 500 ha with a multi-rotor drone would be practically
unfeasible, would consume many batteries, for those surfaces are
recommended fixed-wing drones capable of flying surfaces up to 1000 ha in a
single flight, some have up to an hour of autonomy, but these drones are
out of your budget, cost more than 2000 $

If the surfaces are very extensive, it would be better idea to think of
satellite images as the colleage said, you could study if you serve the
images of Sentinel-2, with resolution of 10m, are free.

 Enviado con Mailtrack


2016-12-01 15:46 GMT+00:00 Piotr Kania :

> Hi!
>
> I'm sorry if my question is out of the main topics - my current employer
> would like to buy drone. They would like to use it for "registration" such
> things as (for example) - small areas without trees in dense forest, that
> were cut (it's not a national park, but normal typical forest -> so here we
> have timber harvest etc.); here is link to Google Maps, that shows what I
> mean -
>
> https://goo.gl/maps/iEPchbrTYyQ2
>
> Normally I (or someone else) must walk with gps receiver, then digitize
> that "holes" in qgis. The idea is to use drone for that - and here is my
> question - what would you recommend? - I know the max. acceptable price is
> about 2300 usd, but it's better to assume 1200 usd. I think my employer
> would be already happy if such "drone" just make aerial photos that can be
> used for mapping, I don't think that my company would like to have some 3d
> data (DEM, DSM).
>
> Thanks for any hints
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user




-- 
[image: Logo]

Alejandro Chamizo de Castro

Analista SIG

*+34 653681823* · i...@agprecision.es

www.agprecision.es


[image: eco] No me imprimas si no es necesario. Protejamos el medio ambiente
[image: View Tony Wilson's profile on LinkedIn]

 
WEB: *http://www.gisland.es/ *
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[Nuno de Santos Loureiro]

Hi Piotr,

I'm using a Phanthom 3 Pro to take the photos.
Also, I'm using Maps Made Easy (https://www.mapsmadeeasy.com/) to  
manage the photos.

Cheap, easy and very good results!

Kind regards,

Nuno



Citando Piotr Kania :


Hi!

I'm sorry if my question is out of the main topics - my current  
employer would like to buy drone. They would like to use it for  
"registration" such things as (for example) - small areas without  
trees in dense forest, that were cut (it's not a national park, but  
normal typical forest -> so here we have timber harvest etc.); here  
is link to Google Maps, that shows what I mean -


https://goo.gl/maps/iEPchbrTYyQ2

Normally I (or someone else) must walk with gps receiver, then  
digitize that "holes" in qgis. The idea is to use drone for that -  
and here is my question - what would you recommend? - I know the  
max. acceptable price is about 2300 usd, but it's better to assume  
1200 usd. I think my employer would be already happy if such "drone"  
just make aerial photos that can be used for mapping, I don't think  
that my company would like to have some 3d data (DEM, DSM).


Thanks for any hints


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user




Nuno


-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
Nuno de Santos Loureiro (PhD)
Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8
Universidade do Algarve
Campus de Gambelas
8005-139 FARO   (Portugal)
-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-



This message was sent using IMP, the Internet Messaging Program.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Drones in forestry

[ralfwessels]

Hi Piotre,
don't know much about drones, but nowadays you can get a lot of high
resolution satellite images (below 1m) where you schould identify holes in
forests.
I guess prices for these are cheaper than a drone and you will have much
less work to analyse the data.
Ralf



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/Drones-in-forestry-tp5298266p5298267.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Drones in forestry

[Piotr Kania]

Hi!

I'm sorry if my question is out of the main topics - my current employer 
would like to buy drone. They would like to use it for "registration" 
such things as (for example) - small areas without trees in dense 
forest, that were cut (it's not a national park, but normal typical 
forest -> so here we have timber harvest etc.); here is link to Google 
Maps, that shows what I mean -


https://goo.gl/maps/iEPchbrTYyQ2

Normally I (or someone else) must walk with gps receiver, then digitize 
that "holes" in qgis. The idea is to use drone for that - and here is my 
question - what would you recommend? - I know the max. acceptable price 
is about 2300 usd, but it's better to assume 1200 usd. I think my 
employer would be already happy if such "drone" just make aerial photos 
that can be used for mapping, I don't think that my company would like 
to have some 3d data (DEM, DSM).


Thanks for any hints


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Hide attributes in large tables?

[Alexandre Neto]

I wonder if it's documented... Need to check!

A qui, 1/12/2016, 04:54, Johanna Botman 
escreveu:

> Thanks Nyall,
>
> I'll have to see if IT will let me upgrade
>
>
>
> ___
> Johanna Botman
> GIS / Assets Officer
>
>
> Griffith City Council
> Ph: 02 6962 8168
>
> [image: Show details for Nyall Dawson ---01/12/2016 12:09:37 PM---On 1 Dec
> 2016 10:29 AM, "Johanna Botman"  
> wrote:]Nyall
> Dawson ---01/12/2016 12:09:37 PM---On 1 Dec 2016 10:29 AM, "Johanna Botman"
>  wrote:
> [image: Hide details for Nyall Dawson ---01/12/2016 12:09:37 PM---On 1 Dec
> 2016 10:29 AM, "Johanna Botman"  
> wrote:]Nyall
> Dawson ---01/12/2016 12:09:37 PM---On 1 Dec 2016 10:29 AM, "Johanna Botman"
>  wrote:
>
> From: Nyall Dawson 
> To: Johanna Botman 
> Cc: qgis-user 
> Date: 01/12/2016 12:09 PM
> Subject: Re: [Qgis-user] Hide attributes in large tables?
> --
>
>
>
>
>
>
> On 1 Dec 2016 10:29 AM, "Johanna Botman" <
> *johanna.bot...@griffith.nsw.gov.au* >
> wrote:
>
>Hi,
>
>Is there a way to temporarily hide columns in tables in QGIS? Like in
>Excel where you can hide/unhide so that you don't need to scroll so far to
>the left and right.
>
>
>
> This requires 2.16 or above - just right click the column heading.
>
> Nyall
>
>
> This e-mail, together with any attachments, is for the exclusive and
> confidential use of the addressee(s). Confidentiality is not waived if you
> are not the intended recipient. Any other distribution, use of, or
> reproduction without prior written consent is strictly prohibited.
>
> Views expressed in this e-mail are those of the individual, except where
> specifically stated otherwise. If this e-mail has been sent to you in
> error, please delete the e-mail completely and immediately from your
> system. Although reasonable precautions are taken, Griffith City Council
> does not warrant or guarantee this message to be free of errors,
> interference, viruses or similar malicious code and does not accept
> liability for any consequences to the recipient opening or using this email
> or attachments.
>
> This email was scanned and cleared by MailMarshal, Sophos & Kaspersky AV
> --
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

-- 
Alexandre Neto
-
@AlexNetoGeo
http://sigsemgrilhetas.wordpress.com
http://gisunchained.wordpress.com
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] DISTANCE TO NEAREST POINT

[Havard Tveite]

MMQGIS does not seem to accept the same layer as source and
destination.
The NNJoin plugin will calculate the distance to the nearest
neighbour and will identify it through its attribute values,
but will not help you with the plotting.

Håvard

On 29. nov. 2016 20:10, Ricardo Thompson wrote:

Good evening,

I have a vector layer with eight locations and I want to calculate and plot the 
distance from each point to the nearest among them. I tried to use MMQGIS - 
Create - Hub distance, but nothing really comes out.

What am I doing wrong?

Thanks!

Ricardo
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user



--
Håvard Tveite
Department of Mathematical Sciences and Technology, NMBU
Drøbakveien 31, POBox 5003, N-1432 Ås, NORWAY
Phone: +47 67231548 Fax: +47 64965401 http://www.nmbu.no/imt/
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] MOLUSCE plugin

[Paolo Cavallini]

Hi Micha,

Il 01/12/2016 09:21, Micha Silver ha scritto:
> The work around is to replace two occurances of
> "NavigationToolbar2QTAgg" with  "NavigationToolbar2QT". That extra
> module (...Agg) was deprecated as of maplotlib 1.5.1.

yes, same problem as in other plugins

> I can't find where
> to enter an issue for this specific plugin, so it doesn't get lost.

there is the link in plugin manager:
https://github.com/nextgis/molusce/issues

> Updating to QGIS3 means, I guess, porting to python 3?

yes, and to the new APIs. I'm not sure the original authors will upgrade
it, maybe you can ask them?
all the best
-- 
Paolo Cavallini - www.faunalia.eu
QGIS & PostGIS courses: http://www.faunalia.eu/training.html
https://www.google.com/trends/explore?date=all&geo=IT&q=qgis,arcgis
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] MOLUSCE plugin

[Micha Silver]

On 12/01/2016 09:38 AM, Paolo Cavallini wrote:

Il 01/12/2016 08:33, Micha Silver ha scritto:


Indeed, in Ubuntu the maplotlib libraries do not have that module. This
works:
from matplotlib.backends.backend_qt4agg import NavigationToolbar2QT as
NavigationToolbar
(NavigationToolbarQT without the Agg at the end)

I checked on a Windows 7 machine with QGIS 2.18 standalone and the
plugin installs fine.

Any ideas how to straighten this out on Ubuntu?

Hi Micha,
thanks for your note. In fact, the plugin would need a bit of love,
especially upgrading it for the upcoming QGIS3.
Anyone interested?
All the best.
The work around is to replace two occurances of 
"NavigationToolbar2QTAgg" with  "NavigationToolbar2QT". That extra 
module (...Agg) was deprecated as of maplotlib 1.5.1. I can't find where 
to enter an issue for this specific plugin, so it doesn't get lost.


Updating to QGIS3 means, I guess, porting to python 3?


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user