Re: [Qgis-user] (no subject)

[Werner Macho]

Hi!
I only opened the conc2.dbf with normal "Add Vector Layer" - no
problems .. all data in the attribute table ..

sorry - no GRASS plugin here .. - are you forced to use v.in.db?

regards
Werner

On Fri, 2011-03-25 at 17:03 +0100, muss...@alice.it wrote:
> Hi
> my new Quantum GIS 1.6.0, when I try to use v.in.db, say : "DBMI-DBF driver 
> error:
> Cannot open dbf database: D:/Quantum GIS Copiapo/conc2.dbf 
> Unable to 
> open database by driver "
> 
> The problem is in my file? (I attach it)
> 
> Tanks a 
> lot.
> Gianluca Mussetti
> ___ Qgis-user mailing list 
> Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user



signature.asc
Description: This is a digitally signed message part
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Leonardo Lami]

Hi,
for me no problem, ecxept for the type of field ID. It's float, but it 
has to be integer if you use it to create the key column in the GRASS 
vector.


This is the test command used:

v.in.db database=/home/leo/prove/ table=conc2 driver=dbf x=X y=Y key=ID2 
output=conc2



regards
Leonardo




Il 25/03/2011 17:03, muss...@alice.it ha scritto:

Hi
my new Quantum GIS 1.6.0, when I try to use v.in.db, say : "DBMI-DBF driver
error:
Cannot open dbf database: D:/Quantum GIS Copiapo/conc2.dbf
Unable to
open database by driver "

The problem is in my file? (I attach it)

Tanks a
lot.
Gianluca Mussetti


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user



--
Leonardo Lami
Cell: 349 1310164
E-mail: l...@gis3w.it
Web: www.gis3w.it

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Carlos Carbajal]

El 21/11/2011 02:44 p.m., MONJARAZ escribió:
Hello Am user principiante of Qgis, finish to buy a gps magellan 
explorists 610 which allows to take fotografias that remain 
georeferenciadas. My question is if there is algun complement or as 
they can  associate etas photos to a project of Quantum



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Hello,
I think you should try using the pluging eVIS  
(http://www.qgis.org/wiki/File:How_to_geosetter_eVis_view_geoloc_photos.pdf)



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giovanni Manghi]

>  
> I think you should try using the pluging eVIS
> (http://www.qgis.org/wiki/File:How_to_geosetter_eVis_view_geoloc_photos.pdf)

or the photo2shape plugin

cheers

-- Giovanni --

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

RE: [Qgis-user] (no subject)

[Gerardo Jimenez]

"how do I convert polylines to polygons?"

Go to Vector/Geometry tools/Lines to polygons. There is also a plugin 
(poligonizer)  with this function. A word of advice, your polylines must 
begin/end on common nodes

Hope it helps

Gerardo Jiménez Delgado
Instituto de Investigaciones Antropológicas
Universidad Nacional Autónoma de México
Ciudad Universitaria s/n
Coyoacan 04510
Mexico City
Mexico

56 22 95 16

> Date: Wed, 21 Dec 2011 19:31:31 +0100
> From: davide.damato_1...@libero.it
> To: qgis-user@lists.osgeo.org
> Subject: [Qgis-user] (no subject)
> 
> come faccio a trasformare linee spezzate in poligoni?
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giovanni Manghi]

> 
> How do I best work with layers in different CRS?


are you using layers from the "openlayers" plugin? if yes, then you must
reproject everything in the google mercator CRS.

cheers

-- Giovanni --


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

RE: [Qgis-user] (no subject)

[Jake Maier]

Thank you Giovanni,
Does that mean I cannot load openlayers maps and WMS maps at the same time. The 
only option I seem to have for the WMS maps is WGS 84 and UTM zone 19, or is 
there a way to display both within the same project?
Thanks very much for all your work on the list
Jake

-Original Message-
From: Giovanni Manghi [mailto:giovanni.man...@faunalia.pt] 
Sent: Friday, March 09, 2012 9:41 AM
To: Jake Maier
Cc: Qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] (no subject)


> 
> How do I best work with layers in different CRS?


are you using layers from the "openlayers" plugin? if yes, then you must 
reproject everything in the google mercator CRS.

cheers

-- Giovanni --


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

RE: [Qgis-user] (no subject)

[Giovanni Manghi]

Hi Jake,


> Does that mean I cannot load openlayers maps and WMS maps at the same time.

no, it means that the layers from the OL plugin are not reprojectable,
so you must reproject everything else in their own CRS, google mercator.

cheers

-- Giovanni --

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

RE: [Qgis-user] (no subject)

[Jake Maier]

It looks now to me that all layers always loaded correctly. What seems to be 
the problem is that I cannot get Google Streets or OpenstreetMap to display. 
Both these layers were placed underneath the shp and the NAIP (WMS) maps. 
Turning off the NAIP layer should activate the Google Street map, which is 
directly under the NAIP layer and turned on, but I cannot get it to display. I 
turned the layer on and off, and checked and unchecked (repeatedly) the render 
button. But nothing happens. When I zoomed into the map, the complete google 
streets displays, which is odd because by zooming in it actually zoomed out. 
Maybe this is a bug?
Jake

-Original Message-
From: Giovanni Manghi [mailto:giovanni.man...@faunalia.pt] 
Sent: Friday, March 09, 2012 11:10 AM
To: Jake Maier
Cc: Qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] (no subject)

Hi Jake,


> Does that mean I cannot load openlayers maps and WMS maps at the same time.

no, it means that the layers from the OL plugin are not reprojectable, so you 
must reproject everything else in their own CRS, google mercator.

cheers

-- Giovanni --

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 12/03/2012 22:23, Alister Hood ha scritto:

> 1. It is common for QGIS plugins to have dependencies which are not readily
> available for Windows (you may need to put in the effort to build them 
> yourself).

Not so common: can you provide examples?

> 2. Plugins sometimes have Windows related problems.  I guess some of the
> developers don't do much testing for Windows.

I do not think this is a widespread phenomenon.

> 4. There seems to be a reasonable history of issues with QGIS that only 
> appear on
> Windows, particularly problems with printing.  Again, I think this is due to 
> the
> developers not using windows.

I would say many Win users do not report and follow bugs, and they are not used
helping (by coding or by sponsoring) to fix them.

> 5. FWIW I get a reasonable number of crashes when I try to run QGIS on 64 bit
> Windows 7, and none on 32bit Windows XP.  I do always run a self-compiled (on 
> XP)
> master version of QGIS, not an official build, but I don't really see why that
> would affect running on 64bit Windows 7.  As you have seen though, some people
> report no trouble on Windows 7. 

I think these are local (compilation) problems. I use regularly qgis on a 
variety of
win machines for courses, and I do not encounter major problems.

All the best.
-- 
Paolo Cavallini - Faunalia
www.faunalia.eu
Full contact details at www.faunalia.eu/pc
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giovanni Manghi]

Hi,

> > 2. Plugins sometimes have Windows related problems.  I guess some of the
> > developers don't do much testing for Windows.
> 
> I do not think this is a widespread phenomenon.



I agree. There are evidences of the contrary, for example many plugins
that have GUIs that are developed under Windows and render bad under
Linux and OsX.



> > 4. There seems to be a reasonable history of issues with QGIS that only 
> > appear on
> > Windows, particularly problems with printing.  Again, I think this is due 
> > to the
> > developers not using windows.
> 
> I would say many Win users do not report and follow bugs, and they are not 
> used
> helping (by coding or by sponsoring) to fix them.


The printing issue (of large layouts) is a known regression (used to
work fine on qgis 1.6), but again I agree with Paolo.




> > 5. FWIW I get a reasonable number of crashes when I try to run QGIS on 64 
> > bit
> > Windows 7, and none on 32bit Windows XP.  I do always run a self-compiled 
> > (on XP)
> > master version of QGIS, not an official build, but I don't really see why 
> > that
> > would affect running on 64bit Windows 7.  As you have seen though, some 
> > people
> > report no trouble on Windows 7. 

I use regularly QGIS on a Windows 7 64bit virtual machine and I don't
see much differences when compared to Windows 32bit.

cheers

-- Giovanni --

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alister Hood]

> Date: Tue, 13 Mar 2012 16:40:11 +0100
> From: Paolo Cavallini 
> Subject: Re: [Qgis-user] (no subject)
> To: qgis-user@lists.osgeo.org
> Message-ID: <4f5f6a5b.60...@faunalia.it>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Il 12/03/2012 22:23, Alister Hood ha scritto:
> 
> > 1. It is common for QGIS plugins to have dependencies which are not
> > readily available for Windows (you may need to put in the effort to
> build them yourself).
> 
> Not so common: can you provide examples?

Sure, I guess it all depends on what you consider to be common.  I certainly 
haven't seen this problem with _most_ plugins, but it is more than just one or 
two.

Recent examples I can think of are the Contour plugin (I think its dependencies 
are available now, after the switch to Python 2.7 in OSGeo4W), and the 
plugin(s?) that require Rpy or whatever it is that isn't available since the 
switch to Python 2.7.  And for a long time before that on Windows some of the 
plugins that used R (I'm not sure if they're the same ones which can't be used 
now) could only be used with quite an old version of R.
I remember several other examples, but the details don't spring to mind.

There's also the point that on Windows if a plugin has an unusual dependency 
you have to actually go looking for a Windows package, rather than just 
installing it from your distro's package manager.  And I've tried a number of 
plugins with python dependencies that you have to install by manually 
extracting files into the right place from a Windows installer package.  This 
isn't particularly user friendly ;)

> > 2. Plugins sometimes have Windows related problems.  I guess some of
> > the developers don't do much testing for Windows.
> 
> I do not think this is a widespread phenomenon.

It might not be.  But if you think people don't generally report bugs on 
windows, who knows?

> > 4. There seems to be a reasonable history of issues with QGIS that
> > only appear on Windows, particularly problems with printing.  Again, I
> > think this is due to the developers not using windows.
> 
> I would say many Win users do not report and follow bugs, and they are not
> used helping (by coding or by sponsoring) to fix them.

Yes, I guess that's the other contributing factor.

> > 5. FWIW I get a reasonable number of crashes when I try to run QGIS on
> > 64 bit Windows 7, and none on 32bit Windows XP.  I do always run a
> > self-compiled (on XP) master version of QGIS, not an official build,
> > but I don't really see why that would affect running on 64bit Windows
> > 7.  As you have seen though, some people report no trouble on Windows 7.
> 
> I think these are local (compilation) problems. I use regularly qgis on a
> variety of win machines for courses, and I do not encounter major
> problems.

Actually, in the past when I used the OSGeo4W packages I had even more crashes 
on that Windows 7 machine, so I'm wondering if there's something wrong with the 
machine...
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 13/03/2012 23:59, Alister Hood ha scritto:

> Recent examples I can think of are the Contour plugin (I think its 
> dependencies
> are available now, after the switch to Python 2.7 in OSGeo4W), and the 
> plugin(s?)
> that require Rpy or whatever it is that isn't available since the switch to 
> Python
> 2.7.  And for a long time before that on Windows some of the plugins that 
> used R
> (I'm not sure if they're the same ones which can't be used now) could only be 
> used
> with quite an old version of R.

Contour plugin is deprecated, as its functionality is now included in the raster
menu. Rpy2 is a known upstream problem.

> I remember several other examples, but the details
> don't spring to mind.

Please do not spread FUD. A missing lib is a rather exceptional occurrence, and
happens mostly with a few experimental plugins.

> It might not be.  But if you think people don't generally report bugs on 
> windows,
> who knows?

I run tens of courses, with hundreds of users, mostly on Win. So I should know.

> Actually, in the past when I used the OSGeo4W packages I had even more 
> crashes on
> that Windows 7 machine, so I'm wondering if there's something wrong with the
> machine...

Probably it's a local problem.
All the best.
-- 
Paolo Cavallini - Faunalia
www.faunalia.eu
Full contact details at www.faunalia.eu/pc
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giovanni Manghi]

> > Recent examples I can think of are the Contour plugin (I think its 
> > dependencies
> > are available now, after the switch to Python 2.7 in OSGeo4W), and the 
> > plugin(s?)
> > that require Rpy or whatever it is that isn't available since the switch to 
> > Python
> > 2.7.  And for a long time before that on Windows some of the plugins that 
> > used R
> > (I'm not sure if they're the same ones which can't be used now) could only 
> > be used
> > with quite an old version of R.
> 
>  Rpy2 is a known upstream problem.

correct, the issue is that the main rpy2 developer do not make anymore
builds for Windows and pyhton > 2.5, unless interested people will find
a way to support this work. As a result the 3 plugins that do make use
of R/rpy2 are not working anymore on Windows. But you can always use
QGIS up to 1.7.3 (that still uses python 2.5) and R <= 2.11.1.

cheers

-- Giovanni --

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Andreas Neumann]

Hi Steven,

The mailinglists are "do it yourself". Go to 
http://lists.osgeo.org/mailman/listinfo/qgis-user and to the very bottom 
of the page. Enter your email address and press "Unsubscribe or Edit 
Options" --> follow the instructions.


Andreas

On Fri, 30 Mar 2012 11:59:32 +0300, Steven Kounis wrote:

REMOVE ME FROM THIS MAILING LIST PLEASE

--
Κουνής Στέφανος - Steven Kounis
Πτυχιούχος Μηχανικός Γεωπληροφορικής
και Τοπογραφίας - Geomatics & Surveying
Λιάσκα 9 Χαλκίδα
Tel : 6973856793 - 2221082822
 Skype : stkounis
www.kounis.gr [1],
stkou...@gmail.com [2]


Links:
--
[1] http://www.kounis.gr
[2] mailto:stkou...@gmail.com


--
--
Andreas Neumann
Böschacherstrasse 10A
8624 Grüt (Gossau ZH)
Switzerland
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Gerba Leta]

Dear Steven,
 
I am also fed-up of the pop-ups filling my folder merely from qgis.org so let 
us join hand voice back to them together “Please Remove me from this email 
list”.
 
Thanks for joining me.  
 
Gerba
 
--- On Fri, 3/30/12, Steven Kounis  wrote:


From: Steven Kounis 
Subject: [Qgis-user] (no subject)
To: Qgis-user@lists.osgeo.org
Date: Friday, March 30, 2012, 1:59 AM


REMOVE ME FROM THIS MAILING LIST PLEASE


-- 
Κουνής Στέφανος - Steven Kounis
Πτυχιούχος Μηχανικός Γεωπληροφορικής και Τοπογραφίας - Geomatics & Surveying
Λιάσκα 9 Χαλκίδα
Tel : 6973856793 - 2221082822
Skype : stkounis
www.kounis.gr,
stkou...@gmail.com

-Inline Attachment Follows-


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Martin Dobias]

Hi,

this might be useful for you:
http://www.mapserver.sk/~wonder/qnavigator/

It's based on QGIS and is able to do routing based on a roadmap,
respecting one-way streets, turn restrictions etc.

Martin

On Sat, Mar 1, 2008 at 9:41 AM, GEEO's Students Project
<[EMAIL PROTECTED]> wrote:
>
> Hie all
>  i am using Quantum gis version 9.1. I have two vector layers one having a
> mesh of roads(polylines) and the other with cities as points. I want to do
> the following using these two layers:
>
>  By selecting two cities i want to highlight the route(road segment) based
> on a metric ( shortest or the least congested /quickest).
>
>
>  could anyone help me out and suggest any tutorial or a site link to solve
> my problem.
>  I would be grateful .
>  Thanx
>
>
> 
> Live the life in style with MSN Lifestyle. Check out! Try it now!
> ___
>  Qgis-user mailing list
>  Qgis-user@lists.osgeo.org
>  http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[William Kyngesburye]

On Oct 16, 2008, at 9:29 AM, Sergio Zárate Pedroche wrote:


Hi,
I have a problem with RGB complement. The installer says: "no module  
named gdal". I installed from binaries for Mac using Tiger 10.4.11.


Which binary - my framework-based, or Tom's all-in-one?

Which Qgis version?

In a different issue, QGIS will not read volumes (an external  
firewire drive).


I think this is a known issue.  I thought there was work done to add a  
Mac version of the open dialog, but I guess it's not ready yet.


Hmmm... aliases don't work as a workaround - it completely ignores  
aliases.



Tom: what happened to the Mac open/save dialogs plan?

-
William Kyngesburye 
http://www.kyngchaos.com/

"Oh, look, I seem to have fallen down a deep, dark hole.  Now what  
does that remind me of?  Ah, yes - life."


- Marvin


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Christopher Barker]

William Kyngesburye wrote:
I think this is a known issue.  I thought there was work done to add a 
Mac version of the open dialog,


That would be great -- the current one (QT default?) is painfully bad 
(on OS-X anyway).


-Chris



--
Christopher Barker, Ph.D.
Oceanographer

Emergency Response Division
NOAA/NOS/OR&R(206) 526-6959   voice
7600 Sand Point Way NE   (206) 526-6329   fax
Seattle, WA  98115   (206) 526-6317   main reception

[EMAIL PROTECTED]
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Tom Elwertowski]

William Kyngesburye wrote:

On Oct 16, 2008, at 9:29 AM, Sergio Zárate Pedroche wrote:
In a different issue, QGIS will not read volumes (an external firewire 
drive).


I think this is a known issue.  I thought there was work done to add a 
Mac version of the open dialog, but I guess it's not ready yet.


Hmmm... aliases don't work as a workaround - it completely ignores aliases.

Tom: what happened to the Mac open/save dialogs plan?


I did a proof-of-concept which fixed only qgisapp.cpp (Add Vector/Raster 
Layer). This was not submitted to svn. The next step would have been to 
create a QgsFileDialog class to be used in place of QFileDialog so that 
the fix is made for all file dialogs, not just those in qgisapp.cpp.


I then did the 0.11 release without this fix and noticed that my extra 
volumes were appearing in file dialogs. I concluded that some other 
change to Qt 4.4.1 somehow fixed this since my bug report (212103) is 
still marked pending/unscheduled.


About three weeks ago, I deleted com.trolltech.plist and my extra 
volumes disappeared. Apparently, QFileDialog::setSidebarUrls adds items 
 to the sidebar permanently rather then just for the current 
instantiation of the QFileDialog. Thus running my proof-of-concept once 
made all future runs of any Qt app see my extra volumes so I thought the 
problem was fixed.


About two weeks ago, the non-native dialog disappeared from Qt 4.5. All 
 Mac file dialogs are native. Appending extra controls to Mac native 
file dialogs hasn't been implemented yet so the QGIS Encoding popup is 
currently unavailable in Qt 4.5.


At this point, it looks like if we do nothing, the problem will go away 
when Qt 4.5 is released (which may be around January). Qt 4.5 Carbon 
seems to work as well as Qt 4.4 for those who want native dialogs now. 
Qt 4.5 Cocoa is quirky but also usable (no splash screen, no icons in 
menus, some dialogs appear half off screen).


Tom
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[John C. Tull]

On Oct 16, 2008, at 9:47 PM, Tom Elwertowski wrote:


William Kyngesburye wrote:

On Oct 16, 2008, at 9:29 AM, Sergio Zárate Pedroche wrote:
In a different issue, QGIS will not read volumes (an external  
firewire drive).
I think this is a known issue.  I thought there was work done to  
add a Mac version of the open dialog, but I guess it's not ready yet.
Hmmm... aliases don't work as a workaround - it completely ignores  
aliases.

Tom: what happened to the Mac open/save dialogs plan?


I did a proof-of-concept which fixed only qgisapp.cpp (Add Vector/ 
Raster Layer). This was not submitted to svn. The next step would  
have been to create a QgsFileDialog class to be used in place of  
QFileDialog so that the fix is made for all file dialogs, not just  
those in qgisapp.cpp.


I then did the 0.11 release without this fix and noticed that my  
extra volumes were appearing in file dialogs. I concluded that some  
other change to Qt 4.4.1 somehow fixed this since my bug report  
(212103) is still marked pending/unscheduled.


About three weeks ago, I deleted com.trolltech.plist and my extra  
volumes disappeared. Apparently, QFileDialog::setSidebarUrls adds  
items  to the sidebar permanently rather then just for the current  
instantiation of the QFileDialog. Thus running my proof-of-concept  
once made all future runs of any Qt app see my extra volumes so I  
thought the problem was fixed.


About two weeks ago, the non-native dialog disappeared from Qt 4.5.  
All  Mac file dialogs are native. Appending extra controls to Mac  
native file dialogs hasn't been implemented yet so the QGIS Encoding  
popup is currently unavailable in Qt 4.5.


At this point, it looks like if we do nothing, the problem will go  
away when Qt 4.5 is released (which may be around January). Qt 4.5  
Carbon seems to work as well as Qt 4.4 for those who want native  
dialogs now. Qt 4.5 Cocoa is quirky but also usable (no splash  
screen, no icons in menus, some dialogs appear half off screen).


Tom,

Thanks for pointing out the Qt4.5 dialog change. That has been a  
concern for me as well, but now that Qt is moving to a native dialog  
it should be considered fixed.


On a side note, with Qt4.5 carbon built from today's snapshot, the  
grass plugin fails to compile. I had to disable grass in order to get  
a finished qgis trunk build. Because qt is not stable, I have not  
filed a bug.


The file dialog worked well. Very nice, indeed.

Cheers,
John___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[William Kyngesburye]

On Oct 17, 2008, at 9:46 PM, John C. Tull wrote:

About two weeks ago, the non-native dialog disappeared from Qt 4.5.  
All  Mac file dialogs are native. Appending extra controls to Mac  
native file dialogs hasn't been implemented yet so the QGIS  
Encoding popup is currently unavailable in Qt 4.5.


At this point, it looks like if we do nothing, the problem will go  
away when Qt 4.5 is released (which may be around January). Qt 4.5  
Carbon seems to work as well as Qt 4.4 for those who want native  
dialogs now. Qt 4.5 Cocoa is quirky but also usable (no splash  
screen, no icons in menus, some dialogs appear half off screen).


Tom,

Thanks for pointing out the Qt4.5 dialog change. That has been a  
concern for me as well, but now that Qt is moving to a native dialog  
it should be considered fixed.


Well, Qt 4.5 is still in development.  Qgis works with the current  
stable Qt, and more work to get all the kinks worked out (like your  
GRASS problem below, or adding the extra Qgis controls) would delay  
Qgis even more.


I'd be happy with Tom's proof-of-concept fix - I think the main need  
for access to external drives is to add raster and vector layers.


On a side note, with Qt4.5 carbon built from today's snapshot, the  
grass plugin fails to compile. I had to disable grass in order to  
get a finished qgis trunk build. Because qt is not stable, I have  
not filed a bug.


The file dialog worked well. Very nice, indeed.

Cheers,
John


-
William Kyngesburye 
http://www.kyngchaos.com/

"This is a question about the past, is it? ... How can I tell that the  
past isn't a fiction designed to account for the discrepancy between  
my immediate physical sensations and my state of mind?"


- The Ruler of the Universe


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[John C. Tull]

On Oct 17, 2008, at 8:13 PM, William Kyngesburye wrote:


On Oct 17, 2008, at 9:46 PM, John C. Tull wrote:

About two weeks ago, the non-native dialog disappeared from Qt  
4.5. All  Mac file dialogs are native. Appending extra controls to  
Mac native file dialogs hasn't been implemented yet so the QGIS  
Encoding popup is currently unavailable in Qt 4.5.


At this point, it looks like if we do nothing, the problem will go  
away when Qt 4.5 is released (which may be around January). Qt 4.5  
Carbon seems to work as well as Qt 4.4 for those who want native  
dialogs now. Qt 4.5 Cocoa is quirky but also usable (no splash  
screen, no icons in menus, some dialogs appear half off screen).


Tom,

Thanks for pointing out the Qt4.5 dialog change. That has been a  
concern for me as well, but now that Qt is moving to a native  
dialog it should be considered fixed.


Well, Qt 4.5 is still in development.  Qgis works with the current  
stable Qt, and more work to get all the kinks worked out (like your  
GRASS problem below, or adding the extra Qgis controls) would delay  
Qgis even more.


I'd be happy with Tom's proof-of-concept fix - I think the main need  
for access to external drives is to add raster and vector layers.


Fair point. I possibly misunderstood and read Tom to say that he was  
willing to let it resolve itself once Qt4.5 becomes stable.


If it is an easy thing to do, I would also favor the proof-of-concept  
being committed to svn so the problem can be resolved now.


John
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Tom Elwertowski]

John C. Tull wrote:
On a side note, with Qt4.5 carbon built from today's snapshot, the grass 
plugin fails to compile. I had to disable grass in order to get a 
finished qgis trunk build. Because qt is not stable, I have not filed a 
bug.


qgsgrassshell is the one remaining QGIS module that still needs Qt3Support.

Qt4.5 is supposed to enable Qt3Support for a Carbon-only build but 
disable it for a Cocoa or combined build. I have only done a combined 
build so I haven't built Qt4.5 Qt3Support.


I use an unfinished port of qgsgrassshell. I have uploaded it to 
http://telwertowski.home.comcast.net/qgsgrassshell_qt4_r9490.diff.


One problem with this shell is that large blocks of output are not 
initially displayed correctly. Instead of multiple lines, you may see 
one line repeated multiple times. If you cover and uncover the window, 
the correct output will be visible. The shell also freezes after running 
a tool from the command line. The workaround is to close and reopen the 
shell. I suspended work on porting the shell to do the menu 
reorganization for QGIS 1.0.


Tom
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Tom Elwertowski]

William Kyngesburye wrote:
I'd be happy with Tom's proof-of-concept fix - I think the main need for 
access to external drives is to add raster and vector layers.


Since Qt is saving the volume list in com.trolltech.plist and then 
retrieving the list for subsequent dialogs, the proof-of-concept is 
actually closer to a complete solution since Open Project or Add Layer 
are likely to be used before any other file dialog.


When I wrote the code, I though the items would be added only to the 
active file dialog. The documentation doesn't mention persistence.


I will add the code bracketed by QT_VERSION < 0x040500 so it doesn't 
interfere with future Qt releases and can easily be found later.


Tom
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[John C. Tull]

Tom,

Have you tried building with the qt-4.5 beta that recently was  
released? I'm trying with the binary from trolltech (have not tried a  
source build yet), but seem to be hitting some issues with  
international support (maybe the binary does not have that included;  
it's not a big download). The grass plugin also appears to still be a  
problem.


I'd like to hear how this might affect the mac platform (positive and  
negative) and any workarounds that you are able to conjure. I posted  
links to my build errors on irc a moment ago if you care to look at  
them.


Regards,
John

On Oct 17, 2008, at 10:44 PM, Tom Elwertowski wrote:


John C. Tull wrote:
On a side note, with Qt4.5 carbon built from today's snapshot, the  
grass plugin fails to compile. I had to disable grass in order to  
get a finished qgis trunk build. Because qt is not stable, I have  
not filed a bug.


qgsgrassshell is the one remaining QGIS module that still needs  
Qt3Support.


Qt4.5 is supposed to enable Qt3Support for a Carbon-only build but  
disable it for a Cocoa or combined build. I have only done a  
combined build so I haven't built Qt4.5 Qt3Support.


I use an unfinished port of qgsgrassshell. I have uploaded it to http://telwertowski.home.comcast.net/qgsgrassshell_qt4_r9490.diff 
.


One problem with this shell is that large blocks of output are not  
initially displayed correctly. Instead of multiple lines, you may  
see one line repeated multiple times. If you cover and uncover the  
window, the correct output will be visible. The shell also freezes  
after running a tool from the command line. The workaround is to  
close and reopen the shell. I suspended work on porting the shell to  
do the menu reorganization for QGIS 1.0.


Tom


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[John C. Tull]

I reinstalled my Qt as I noticed some pieces were missing after doing  
a "Customized" install excluding documentation and examples. I also  
rebuilt sip and PyQt4.


The grass shell is definitely a show stopper currently. If I disable  
grass, I still am not able to get finished. I am still not sure about  
language support problems that seem to be part of the issue. The  
binary is bigger than I thought, so it should have all the  
localization support as before... Here is the output from my build  
using current svn code (no other significant errors in prior output):


[ 95%] Building CXX object src/app/CMakeFiles/qgis.dir/ 
moc_qgspgquerybuilder.o

Linking CXX executable qgis
[ 95%] Built target qgis
[ 95%] [ 95%] [ 95%] [ 95%] Generating qgis_de.qm
Generating qgis_cs_CZ.qm
Generating qgis_el_GR.qm
Generating qgis_ar.qm
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_ar.qm'...
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_de.qm'...
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_el_GR.qm'...
Generated 9 translation(s) (5 finished and 4 unfinished)

Ignored 3052 untranslated source text(s)
Generated 47 translation(s) (9 finished and 38 unfinished)

Ignored 3014 untranslated source text(s)
[ 95%] Generated 3053 translation(s) (1243 finished and 1810  
unfinished)


Ignored 8 untranslated source text(s)
Generating qgis_es.qm
[ 95%] [ 95%] Generating qgis_fr.qm
Generating qgis_hu.qm
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_cs_CZ.qm'...
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_es.qm'...
Generated 2320 translation(s) (2061 finished and 259 unfinished)

Ignored 741 untranslated source text(s)
Generated 2790 translation(s) (2688 finished and 102 unfinished)

Ignored 271 untranslated source text(s)
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_hu.qm'...
lrelease error: duplicate messages found in '/Users/jctull/sources/ 
qgis/trunk/i18n/qgis_fr.ts':


* Context: QgsLabelDialogBase
* Source: °
[ 95%] [ 95%] Generating qgis_id.qm
Generating qgis_it.qm
make[2]: *** [i18n/qgis_fr.qm] Error 1
make[2]: *** Waiting for unfinished jobs
Generated 2252 translation(s) (1995 finished and 257 unfinished)

Ignored 809 untranslated source text(s)
Updating '/Users/jctull/sources/qgis/trunk/build/i18n/qgis_id.qm'...
lrelease error: duplicate messages found in '/Users/jctull/sources/ 
qgis/trunk/i18n/qgis_it.ts':


* Context: QgsCopyrightLabelPluginGuiBase
* Source: head>© QGIS 2006html>


* Context: QgsLabelDialogBase
* Source: °
make[2]: *** [i18n/qgis_it.qm] Error 1
Generated 710 translation(s) (361 finished and 349 unfinished)

Ignored 2351 untranslated source text(s)
make[1]: *** [i18n/CMakeFiles/translations.dir/all] Error 2
make: *** [all] Error 2


John

On Dec 30, 2008, at 7:02 PM, John C. Tull wrote:


Tom,

Have you tried building with the qt-4.5 beta that recently was  
released? I'm trying with the binary from trolltech (have not tried  
a source build yet), but seem to be hitting some issues with  
international support (maybe the binary does not have that included;  
it's not a big download). The grass plugin also appears to still be  
a problem.


I'd like to hear how this might affect the mac platform (positive  
and negative) and any workarounds that you are able to conjure. I  
posted links to my build errors on irc a moment ago if you care to  
look at them.


Regards,
John

On Oct 17, 2008, at 10:44 PM, Tom Elwertowski wrote:


John C. Tull wrote:
On a side note, with Qt4.5 carbon built from today's snapshot, the  
grass plugin fails to compile. I had to disable grass in order to  
get a finished qgis trunk build. Because qt is not stable, I have  
not filed a bug.


qgsgrassshell is the one remaining QGIS module that still needs  
Qt3Support.


Qt4.5 is supposed to enable Qt3Support for a Carbon-only build but  
disable it for a Cocoa or combined build. I have only done a  
combined build so I haven't built Qt4.5 Qt3Support.


I use an unfinished port of qgsgrassshell. I have uploaded it to http://telwertowski.home.comcast.net/qgsgrassshell_qt4_r9490.diff 
.


One problem with this shell is that large blocks of output are not  
initially displayed correctly. Instead of multiple lines, you may  
see one line repeated multiple times. If you cover and uncover the  
window, the correct output will be visible. The shell also freezes  
after running a tool from the command line. The workaround is to  
close and reopen the shell. I suspended work on porting the shell  
to do the menu reorganization for QGIS 1.0.


Tom




___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alexander Bruy]

If you work with QGIS from OSGeo4W check if package gdal16-python is
installed. You need this package for using GDAL Tools plugin.

On Fri, 18 Jun 2010 10:53:53 -0400
Gerardo Jimenez  wrote:

> 
> Hi I wonder If somebody can help me with this, I tried to get contours 
> from a raster layer using the contour tool in gdaltools. I receive the 
> same message using qgis 1.5, 1.4 stand alone and 
> 1.4 Windows - OSGeo4W. The problem is in XPsp3, Vista Home premium and 
> win 7 pro 32.  The message is
> 
> 
> The process failed to start. Either the invoked program is missing, or 
> you may have insufficient permissions to invoke the program.
> 
> I 
> did some research, in the qgis forum is signaled as solved but I tried 
> the posted solution and It did not help at all.  I tried running qgis as
>  andministrator in vista and win 7, same problem.
> 
> Thanks before 
> hand
> 
> 
> Gerardo Jiménez Delgado
> Instituto de Investigaciones 
> Antroplógicas
> Universidad Nacional Autonoma de Mexico
> Ciudad 
> Universitaria s/n
> Coyoacan 04510
> Mexico City
> Mexico
> 
> 56 22 95 16
> 
> 
> _
> The New Busy is not the too busy. Combine all your e-mail accounts with 
> Hotmail.
> http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4

-- 
Alexander Bruy
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 13/07/2010 17:47, guido.pa...@libero.it ha scritto:
> Ciao a tutti, sono un neofita di Qgis, ho installato la versione 1.4 
> Encedalus, 

Hi Guido.
This list is in English: to contact the Italian community, please subscribe to 
the
gfoss mailing list (see gfoss.it).
All the best.
-- 
Paolo Cavallini: http://www.faunalia.it/pc
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[John C. Tull]

How about:

rm -rf /Users/hermanpalaquium/.qgis/python/plugins

On Jul 24, 2010, at 11:59 PM, herman palaquium wrote:

> Couldn't load plugin 'contour' from 
> ['/Users/hermanpalaquium/.qgis/python/plugins/GeoCoding', 
> '/Users/hermanpalaquium/.qgis/python/plugins/elevation', 
> '/Applications/Qgis.app/Contents/MacOS/../Resources/python', 
> '/Users/hermanpalaquium/.qgis//python', 
> '/Users/hermanpalaquium/.qgis//python/plugins', 
> '/Applications/Qgis.app/Contents/MacOS/../Resources/python/plugins', 
> '/Library/Frameworks/SQLite3.framework/Versions/3/Python', 
> '/Library/Frameworks/GDAL.framework/Versions/1.7/Python/site-packages', 
> '/Library/Frameworks/cairo.framework/Versions/1/Python', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python25.zip', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-darwin',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/lib-scriptpackages',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-tk',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-dynload',
>  '/Library/Python/2.5/site-packages', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/PyObjC',
>  '/Applications/Qgis.app/Contents/Resources/python/plugins/fTools/tools', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cadtools/tools', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpecreate/logic', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpecreate/gui', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpequicklookorder/logic',
>  '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpequicklookorder/gui', 
> '~/.qgis/python', '/usr/share/qgis/python', '/usr/share/qgis/python/', 
> '/usr/share/qgis/python/', '/usr/share/qgis/python', 
> '/Users/hermanpalaquium/.qgis/python/plugins/ziplayers/logic', 
> '/Users/hermanpalaquium/.qgis/python/plugins/ziplayers/gui']
> 
> Traceback (most recent call last):
>   File 
> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py", 
> line 119, in loadPlugin
> __import__(packageName)
>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py", 
> line 28, in 
> from contour import Contour
>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py", 
> line 38, in 
> import matplotlib.pyplot as plt
> ImportError: No module named matplotlib.pyplot
> 
> Python version:
> 2.5.1 (r251:54863, Jun 17 2009, 20:37:34) 
> [GCC 4.0.1 (Apple Inc. build 5465)]
> 
> Python path: ['/Users/hermanpalaquium/.qgis/python/plugins/GeoCoding', 
> '/Users/hermanpalaquium/.qgis/python/plugins/elevation', 
> '/Applications/Qgis.app/Contents/MacOS/../Resources/python', 
> '/Users/hermanpalaquium/.qgis//python', 
> '/Users/hermanpalaquium/.qgis//python/plugins', 
> '/Applications/Qgis.app/Contents/MacOS/../Resources/python/plugins', 
> '/Library/Frameworks/SQLite3.framework/Versions/3/Python', 
> '/Library/Frameworks/GDAL.framework/Versions/1.7/Python/site-packages', 
> '/Library/Frameworks/cairo.framework/Versions/1/Python', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python25.zip', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-darwin',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/lib-scriptpackages',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-tk',
>  
> '/System/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-dynload',
>  '/Library/Python/2.5/site-packages', 
> '/System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/PyObjC',
>  '/Applications/Qgis.app/Contents/Resources/python/plugins/fTools/tools', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cadtools/tools', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpecreate/logic', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpecreate/gui', 
> '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpequicklookorder/logic',
>  '/Users/hermanpalaquium/.qgis/python/plugins/cataloginpequicklookorder/gui', 
> '~/.qgis/python', '/usr/share/qgis/python', '/usr/share/qgis/python/', 
> '/usr/share/qgis/python/', '/usr/share/qgis/python', 
> '/Users/hermanpalaquium/.qgis/python/plugins/ziplayers/logic', 
> '/Users/hermanpalaquium/.qgis/python/plugins/ziplayers/gui']
> ___
> Qgis-

Re: [Qgis-user] (no subject)

[Carson Farmer]

Except that will remove all plugins! What you probably really want is:

rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour

Which will only remove the contour plugin, which is failing to load
because matplotlib isn't installed...
I think you can also do this from the Python plugin installer by
selecting to remove the plugin?

Carson

> Traceback (most recent call last):
>   File
> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
> line 119, in loadPlugin
>     __import__(packageName)
>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
> line 28, in
>     from contour import Contour
>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
> line 38, in
>     import matplotlib.pyplot as plt
> ImportError: No module named matplotlib.pyplot

-- 
Carson J. Q. Farmer
ISSP Doctoral Fellow
National Centre for Geocomputation
National University of Ireland, Maynooth,
http://www.carsonfarmer.com/
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Noli Sicad]

I think this problem is very typical problem for plugins with
dependencies with other python packages.

It would have been better if plugins would show the dependecies
message so user could download and install the package.

In this case, just tell the user to download and install the matplotlib package.

http://matplotlib.sourceforge.net/users/installing.html

Noli



On 7/26/10, Carson Farmer  wrote:
> Except that will remove all plugins! What you probably really want is:
>
> rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
>
> Which will only remove the contour plugin, which is failing to load
> because matplotlib isn't installed...
> I think you can also do this from the Python plugin installer by
> selecting to remove the plugin?
>
> Carson
>
>> Traceback (most recent call last):
>>   File
>> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
>> line 119, in loadPlugin
>>     __import__(packageName)
>>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
>> line 28, in
>>     from contour import Contour
>>   File "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
>> line 38, in
>>     import matplotlib.pyplot as plt
>> ImportError: No module named matplotlib.pyplot
>
> --
> Carson J. Q. Farmer
> ISSP Doctoral Fellow
> National Centre for Geocomputation
> National University of Ireland, Maynooth,
> http://www.carsonfarmer.com/
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giuseppe Sucameli]

Hi Noli,

the Python Plugin Installer shows the unsatisfied dependencies yet.

After the error message you should see the "Error loading plugin"
dialog which says to you there are unfulfilled dependencies.

Instead it's strange to see the error message!
Trying to install other plugin with unsatisfied dependencies I don't
see it, but the "error loading plugin" dialog only.

So it's an abnormal plugin behaviour.

Cheers.

On Mon, Jul 26, 2010 at 3:08 AM, Noli Sicad  wrote:

> I think this problem is very typical problem for plugins with
> dependencies with other python packages.
>
> It would have been better if plugins would show the dependecies
> message so user could download and install the package.
>
> In this case, just tell the user to download and install the matplotlib
> package.
>
> http://matplotlib.sourceforge.net/users/installing.html
>
> Noli
>
>
>
> On 7/26/10, Carson Farmer  wrote:
> > Except that will remove all plugins! What you probably really want is:
> >
> > rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
> >
> > Which will only remove the contour plugin, which is failing to load
> > because matplotlib isn't installed...
> > I think you can also do this from the Python plugin installer by
> > selecting to remove the plugin?
> >
> > Carson
> >
> >> Traceback (most recent call last):
> >>   File
> >>
> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
> >> line 119, in loadPlugin
> >> __import__(packageName)
> >>   File
> "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
> >> line 28, in
> >> from contour import Contour
> >>   File
> "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
> >> line 38, in
> >> import matplotlib.pyplot as plt
> >> ImportError: No module named matplotlib.pyplot
> >
> > --
> > Carson J. Q. Farmer
> > ISSP Doctoral Fellow
> > National Centre for Geocomputation
> > National University of Ireland, Maynooth,
> > http://www.carsonfarmer.com/
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>



-- 
Giuseppe Sucameli
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Lionel Roubeyrie]

Hi all,
it's not an abnormal plugin fonctionnality but a standard error
message saying there's some python unsatisfied dependencies, like you
can read at the end of the error message or from the shell :
"ImportError: No module named matplotlib.pyplot". Just have to install
matplotlib and all will be ok. After that, when I was young I learned
a basic rule of life saying if I want an information, I have to
correctly ask the question and not so optionnaly be civilized with an
simple "hello". Didn't see that in the first post...

2010/7/26 Giuseppe Sucameli :
> Hi Noli,
>
> the Python Plugin Installer shows the unsatisfied dependencies yet.
>
> After the error message you should see the "Error loading plugin"
> dialog which says to you there are unfulfilled dependencies.
>
> Instead it's strange to see the error message!
> Trying to install other plugin with unsatisfied dependencies I don't
> see it, but the "error loading plugin" dialog only.
>
> So it's an abnormal plugin behaviour.
>
> Cheers.
>

2010/7/26 Giuseppe Sucameli :
> Hi Noli,
>
> the Python Plugin Installer shows the unsatisfied dependencies yet.
>
> After the error message you should see the "Error loading plugin"
> dialog which says to you there are unfulfilled dependencies.
>
> Instead it's strange to see the error message!
> Trying to install other plugin with unsatisfied dependencies I don't
> see it, but the "error loading plugin" dialog only.
>
> So it's an abnormal plugin behaviour.
>
> Cheers.
>
> On Mon, Jul 26, 2010 at 3:08 AM, Noli Sicad  wrote:
>>
>> I think this problem is very typical problem for plugins with
>> dependencies with other python packages.
>>
>> It would have been better if plugins would show the dependecies
>> message so user could download and install the package.
>>
>> In this case, just tell the user to download and install the matplotlib
>> package.
>>
>> http://matplotlib.sourceforge.net/users/installing.html
>>
>> Noli
>>
>>
>>
>> On 7/26/10, Carson Farmer  wrote:
>> > Except that will remove all plugins! What you probably really want is:
>> >
>> > rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
>> >
>> > Which will only remove the contour plugin, which is failing to load
>> > because matplotlib isn't installed...
>> > I think you can also do this from the Python plugin installer by
>> > selecting to remove the plugin?
>> >
>> > Carson
>> >
>> >> Traceback (most recent call last):
>> >>   File
>> >>
>> >> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
>> >> line 119, in loadPlugin
>> >>     __import__(packageName)
>> >>   File
>> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
>> >> line 28, in
>> >>     from contour import Contour
>> >>   File
>> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
>> >> line 38, in
>> >>     import matplotlib.pyplot as plt
>> >> ImportError: No module named matplotlib.pyplot
>> >
>> > --
>> > Carson J. Q. Farmer
>> > ISSP Doctoral Fellow
>> > National Centre for Geocomputation
>> > National University of Ireland, Maynooth,
>> > http://www.carsonfarmer.com/
>> > ___
>> > Qgis-user mailing list
>> > Qgis-user@lists.osgeo.org
>> > http://lists.osgeo.org/mailman/listinfo/qgis-user
>> >
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
>
> --
> Giuseppe Sucameli
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>



-- 
Lionel Roubeyrie
lionel.roubey...@gmail.com
http://youarealegend.blogspot.com
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Giuseppe Sucameli]

Hi Lionel,

On Mon, Jul 26, 2010 at 1:43 PM, Lionel Roubeyrie <
lionel.roubey...@gmail.com> wrote:

> Hi all,
> it's not an abnormal plugin fonctionnality but a standard error
> message saying there's some python unsatisfied dependencies, like you
> can read at the end of the error message or from the shell :
> "ImportError: No module named matplotlib.pyplot". Just have to install
> matplotlib and all will be ok.
>
AFAIK normally that exception is intecepted by the Python Plugin Installer
that shows the unsatisfied dependencies.

Did you try what happens with other plugins?
AFAICS no error message is shown by the other plugins with
unfulfilled dependencies.

After that, when I was young I learned
> a basic rule of life saying if I want an information, I have to
> correctly ask the question and not so optionnaly be civilized with an
> simple "hello". Didn't see that in the first post...
>
I agree, but it's better to avoid unnecessary polemics.

Shortly before starting this thread, Herman write another thread
titled "what happens?.." that starts:
"hi tim and qgis users".

So I think that it's only a blunder, nobody would start a thread
without subject and greeting.

Cheers.

2010/7/26 Giuseppe Sucameli :

> > Hi Noli,
> >
> > the Python Plugin Installer shows the unsatisfied dependencies yet.
> >
> > After the error message you should see the "Error loading plugin"
> > dialog which says to you there are unfulfilled dependencies.
> >
> > Instead it's strange to see the error message!
> > Trying to install other plugin with unsatisfied dependencies I don't
> > see it, but the "error loading plugin" dialog only.
> >
> > So it's an abnormal plugin behaviour.
> >
> > Cheers.
> >
>
> 2010/7/26 Giuseppe Sucameli :
> > Hi Noli,
> >
> > the Python Plugin Installer shows the unsatisfied dependencies yet.
> >
> > After the error message you should see the "Error loading plugin"
> > dialog which says to you there are unfulfilled dependencies.
> >
> > Instead it's strange to see the error message!
> > Trying to install other plugin with unsatisfied dependencies I don't
> > see it, but the "error loading plugin" dialog only.
> >
> > So it's an abnormal plugin behaviour.
> >
> > Cheers.
> >
> > On Mon, Jul 26, 2010 at 3:08 AM, Noli Sicad  wrote:
> >>
> >> I think this problem is very typical problem for plugins with
> >> dependencies with other python packages.
> >>
> >> It would have been better if plugins would show the dependecies
> >> message so user could download and install the package.
> >>
> >> In this case, just tell the user to download and install the matplotlib
> >> package.
> >>
> >> http://matplotlib.sourceforge.net/users/installing.html
> >>
> >> Noli
> >>
> >>
> >>
> >> On 7/26/10, Carson Farmer  wrote:
> >> > Except that will remove all plugins! What you probably really want is:
> >> >
> >> > rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
> >> >
> >> > Which will only remove the contour plugin, which is failing to load
> >> > because matplotlib isn't installed...
> >> > I think you can also do this from the Python plugin installer by
> >> > selecting to remove the plugin?
> >> >
> >> > Carson
> >> >
> >> >> Traceback (most recent call last):
> >> >>   File
> >> >>
> >> >>
> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
> >> >> line 119, in loadPlugin
> >> >> __import__(packageName)
> >> >>   File
> >> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
> >> >> line 28, in
> >> >> from contour import Contour
> >> >>   File
> >> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
> >> >> line 38, in
> >> >> import matplotlib.pyplot as plt
> >> >> ImportError: No module named matplotlib.pyplot
> >> >
> >> > --
> >> > Carson J. Q. Farmer
> >> > ISSP Doctoral Fellow
> >> > National Centre for Geocomputation
> >> > National University of Ireland, Maynooth,
> >> > http://www.carsonfarmer.com/
> >> > ___
> >> > Qgis-user mailing list
> >> > Qgis-user@lists.osgeo.org
> >> > http://lists.osgeo.org/mailman/listinfo/qgis-user
> >> >
> >> ___
> >> Qgis-user mailing list
> >> Qgis-user@lists.osgeo.org
> >> http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> >
> >
> > --
> > Giuseppe Sucameli
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> >
>
>
>
> --
> Lionel Roubeyrie
> lionel.roubey...@gmail.com
> http://youarealegend.blogspot.com
>



-- 
Giuseppe Sucameli
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Lionel Roubeyrie]

Hi Guiseppe,

ok no polemic no troll (and no woman no cry :p ) just sometimes is
good to look at the basics.
For the message, effectively the Python plugin installer normally
catches the error, then what about the first Herman problem
"ImportError: No module named owslib.etree"?
Is it possible to think about having a small dialog for each plugin in
the installer where plugins devs could set some more detailled
description and maybe the dependencies?
My 2 cents

2010/7/26 Giuseppe Sucameli :
> Hi Lionel,
>
> On Mon, Jul 26, 2010 at 1:43 PM, Lionel Roubeyrie
>  wrote:
>>
>> Hi all,
>> it's not an abnormal plugin fonctionnality but a standard error
>> message saying there's some python unsatisfied dependencies, like you
>> can read at the end of the error message or from the shell :
>> "ImportError: No module named matplotlib.pyplot". Just have to install
>> matplotlib and all will be ok.
>
> AFAIK normally that exception is intecepted by the Python Plugin Installer
> that shows the unsatisfied dependencies.
>
> Did you try what happens with other plugins?
> AFAICS no error message is shown by the other plugins with
> unfulfilled dependencies.
>
>> After that, when I was young I learned
>> a basic rule of life saying if I want an information, I have to
>> correctly ask the question and not so optionnaly be civilized with an
>> simple "hello". Didn't see that in the first post...
>
> I agree, but it's better to avoid unnecessary polemics.
>
> Shortly before starting this thread, Herman write another thread
> titled "what happens?.." that starts:
> "hi tim and qgis users".
>
> So I think that it's only a blunder, nobody would start a thread
> without subject and greeting.
>
> Cheers.
>
> 2010/7/26 Giuseppe Sucameli :
>>
>> > Hi Noli,
>> >
>> > the Python Plugin Installer shows the unsatisfied dependencies yet.
>> >
>> > After the error message you should see the "Error loading plugin"
>> > dialog which says to you there are unfulfilled dependencies.
>> >
>> > Instead it's strange to see the error message!
>> > Trying to install other plugin with unsatisfied dependencies I don't
>> > see it, but the "error loading plugin" dialog only.
>> >
>> > So it's an abnormal plugin behaviour.
>> >
>> > Cheers.
>> >
>>
>> 2010/7/26 Giuseppe Sucameli :
>> > Hi Noli,
>> >
>> > the Python Plugin Installer shows the unsatisfied dependencies yet.
>> >
>> > After the error message you should see the "Error loading plugin"
>> > dialog which says to you there are unfulfilled dependencies.
>> >
>> > Instead it's strange to see the error message!
>> > Trying to install other plugin with unsatisfied dependencies I don't
>> > see it, but the "error loading plugin" dialog only.
>> >
>> > So it's an abnormal plugin behaviour.
>> >
>> > Cheers.
>> >
>> > On Mon, Jul 26, 2010 at 3:08 AM, Noli Sicad  wrote:
>> >>
>> >> I think this problem is very typical problem for plugins with
>> >> dependencies with other python packages.
>> >>
>> >> It would have been better if plugins would show the dependecies
>> >> message so user could download and install the package.
>> >>
>> >> In this case, just tell the user to download and install the matplotlib
>> >> package.
>> >>
>> >> http://matplotlib.sourceforge.net/users/installing.html
>> >>
>> >> Noli
>> >>
>> >>
>> >>
>> >> On 7/26/10, Carson Farmer  wrote:
>> >> > Except that will remove all plugins! What you probably really want
>> >> > is:
>> >> >
>> >> > rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
>> >> >
>> >> > Which will only remove the contour plugin, which is failing to load
>> >> > because matplotlib isn't installed...
>> >> > I think you can also do this from the Python plugin installer by
>> >> > selecting to remove the plugin?
>> >> >
>> >> > Carson
>> >> >
>> >> >> Traceback (most recent call last):
>> >> >>   File
>> >> >>
>> >> >>
>> >> >> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
>> >> >> line 119, in loadPlugin
>> >> >>     __import__(packageName)
>> >> >>   File
>> >> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
>> >> >> line 28, in
>> >> >>     from contour import Contour
>> >> >>   File
>> >> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
>> >> >> line 38, in
>> >> >>     import matplotlib.pyplot as plt
>> >> >> ImportError: No module named matplotlib.pyplot
>> >> >
>> >> > --
>> >> > Carson J. Q. Farmer
>> >> > ISSP Doctoral Fellow
>> >> > National Centre for Geocomputation
>> >> > National University of Ireland, Maynooth,
>> >> > http://www.carsonfarmer.com/
>> >> > ___
>> >> > Qgis-user mailing list
>> >> > Qgis-user@lists.osgeo.org
>> >> > http://lists.osgeo.org/mailman/listinfo/qgis-user
>> >> >
>> >> ___
>> >> Qgis-user mailing list
>> >> Qgis-user@lists.osgeo.org
>> >> http://lists.osgeo.org/mailman/listinfo/qgis-user
>> >
>> >
>> >
>> > --
>> > Giuseppe Sucameli
>> >
>> > _

Re: [Qgis-user] (no subject)

[Giuseppe Sucameli]

On Mon, Jul 26, 2010 at 4:23 PM, Lionel Roubeyrie <
lionel.roubey...@gmail.com> wrote:

> For the message, effectively the Python plugin installer normally
> catches the error, then what about the first Herman problem
> "ImportError: No module named owslib.etree"?
>
I looked at source code and yes, it's a little slip in the code.

I'm going to write in dev-ML to inform all devs to correct their
plugins which throw errors when there are unfulfilled dependencies.


> Is it possible to think about having a small dialog for each plugin in
> the installer where plugins devs could set some more detailled
> description and maybe the dependencies?



My 2 cents
>
Why don't you explain your idea in dev-ML? ;)
I think could be valued.

Cheers.


> 2010/7/26 Giuseppe Sucameli :
> > Hi Lionel,
> >
> > On Mon, Jul 26, 2010 at 1:43 PM, Lionel Roubeyrie
> >  wrote:
> >>
> >> Hi all,
> >> it's not an abnormal plugin fonctionnality but a standard error
> >> message saying there's some python unsatisfied dependencies, like you
> >> can read at the end of the error message or from the shell :
> >> "ImportError: No module named matplotlib.pyplot". Just have to install
> >> matplotlib and all will be ok.
> >
> > AFAIK normally that exception is intecepted by the Python Plugin
> Installer
> > that shows the unsatisfied dependencies.
> >
> > Did you try what happens with other plugins?
> > AFAICS no error message is shown by the other plugins with
> > unfulfilled dependencies.
> >
> >> After that, when I was young I learned
> >> a basic rule of life saying if I want an information, I have to
> >> correctly ask the question and not so optionnaly be civilized with an
> >> simple "hello". Didn't see that in the first post...
> >
> > I agree, but it's better to avoid unnecessary polemics.
> >
> > Shortly before starting this thread, Herman write another thread
> > titled "what happens?.." that starts:
> > "hi tim and qgis users".
> >
> > So I think that it's only a blunder, nobody would start a thread
> > without subject and greeting.
> >
> > Cheers.
> >
> > 2010/7/26 Giuseppe Sucameli :
> >>
> >> > Hi Noli,
> >> >
> >> > the Python Plugin Installer shows the unsatisfied dependencies yet.
> >> >
> >> > After the error message you should see the "Error loading plugin"
> >> > dialog which says to you there are unfulfilled dependencies.
> >> >
> >> > Instead it's strange to see the error message!
> >> > Trying to install other plugin with unsatisfied dependencies I don't
> >> > see it, but the "error loading plugin" dialog only.
> >> >
> >> > So it's an abnormal plugin behaviour.
> >> >
> >> > Cheers.
> >> >
> >>
> >> 2010/7/26 Giuseppe Sucameli :
> >> > Hi Noli,
> >> >
> >> > the Python Plugin Installer shows the unsatisfied dependencies yet.
> >> >
> >> > After the error message you should see the "Error loading plugin"
> >> > dialog which says to you there are unfulfilled dependencies.
> >> >
> >> > Instead it's strange to see the error message!
> >> > Trying to install other plugin with unsatisfied dependencies I don't
> >> > see it, but the "error loading plugin" dialog only.
> >> >
> >> > So it's an abnormal plugin behaviour.
> >> >
> >> > Cheers.
> >> >
> >> > On Mon, Jul 26, 2010 at 3:08 AM, Noli Sicad  wrote:
> >> >>
> >> >> I think this problem is very typical problem for plugins with
> >> >> dependencies with other python packages.
> >> >>
> >> >> It would have been better if plugins would show the dependecies
> >> >> message so user could download and install the package.
> >> >>
> >> >> In this case, just tell the user to download and install the
> matplotlib
> >> >> package.
> >> >>
> >> >> http://matplotlib.sourceforge.net/users/installing.html
> >> >>
> >> >> Noli
> >> >>
> >> >>
> >> >>
> >> >> On 7/26/10, Carson Farmer  wrote:
> >> >> > Except that will remove all plugins! What you probably really want
> >> >> > is:
> >> >> >
> >> >> > rm -rf /Users/hermanpalaquium/.qgis/python/plugins/contour
> >> >> >
> >> >> > Which will only remove the contour plugin, which is failing to load
> >> >> > because matplotlib isn't installed...
> >> >> > I think you can also do this from the Python plugin installer by
> >> >> > selecting to remove the plugin?
> >> >> >
> >> >> > Carson
> >> >> >
> >> >> >> Traceback (most recent call last):
> >> >> >>   File
> >> >> >>
> >> >> >>
> >> >> >>
> "/Applications/Qgis.app/Contents/MacOS/../Resources/python/qgis/utils.py",
> >> >> >> line 119, in loadPlugin
> >> >> >> __import__(packageName)
> >> >> >>   File
> >> >> >>
> "/Users/hermanpalaquium/.qgis//python/plugins/contour/__init__.py",
> >> >> >> line 28, in
> >> >> >> from contour import Contour
> >> >> >>   File
> >> >> >> "/Users/hermanpalaquium/.qgis//python/plugins/contour/contour.py",
> >> >> >> line 38, in
> >> >> >> import matplotlib.pyplot as plt
> >> >> >> ImportError: No module named matplotlib.pyplot
> >> >> >
> >> >> > --
> >> >> > Carson J. Q. Farmer
> >> >> > ISSP Doctoral Fellow
> >> >> > National Centre for Geo

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 08/10/2010 19:38, Mark Chapman ha scritto:
> requested the password to be sent to me so that I could enter it and
> have my name removed but it was not sent to me. 

so you probably entered the wrong address (differnt from the one you used for
subscription).
All the best.
-- 
Paolo Cavallini: http://www.faunalia.it/pc
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[nwastra]

...and what is the question?

N

> On 19 Oct 2018, at 10:20 pm, Amila Bajic  wrote:
> 
> Hi everybody, 
> 
> I'm working as a GIS consultant and my company and team are hiring for some 
> new clients. We are almost using QGIS, that why I'm asking here. Another 
> reason why I ask is because I read everyday your questions (learn a lot) and 
> I guess I could find somene's help here. If anyone have some idea, please let 
> me know. You can also send me private e-mail.
> 
> Thank you and sorry for bothering you all!!
> Best regards, 
> Amila
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Brent Wood]

To add a point, you need to create  a new empty point layer and make it 
editable, so QGIS has somewhere to write the points to.

If you already have a layer to add to, then open that & make it editable 
instead of creating a new layer.


If you are digitising features, you might also enable the digitising & advanced 
digitising (if appropriate) toolbars. (View -> Toolbars on the main menu bar)


A DXF has vertices defined by coordinates. You need to tell QGIS what 
coordinate reference system these coordinates use.



In general, there is a welth of help for this stuff already out there - Google 
is your friend (in this case :-)

If you google for "how to add points in qgis" there are on line videos, 
tutorials, etc... should provide all you need to know...


The same applies to almost any task in QGIS, that is how I justy found a plugin 
you can install, just click on "Plugins" and once

QGIS had downloaded the list of available plugins, search for DXF to find 
"Another DXF Importer / DXF2Shape Converter"



Hope this helps


Brent Wood

Programme leader: Environmental Information Delivery
NIWA
DDI:  +64 (4) 3860529


[cid:imagee98db1.PNG@c26a15af.47bdbe75]


Brent Wood
Principal Technician - GIS and Spatial Data Management
Programme Leader - Environmental Information Delivery
T +64-4-386-0529

National Institute of Water & Atmospheric Research Ltd (NIWA)
301 Evans Bay Parade, Greta Point, Wellington
Connect with NIWA: niwa.co.nz 
Facebook Twitter 
LinkedIn 
Instagram

To ensure compliance with legal requirements and to maintain cyber security 
standards, NIWA's IT systems are subject to ongoing monitoring, activity 
logging and auditing. This monitoring and auditing service may be provided by 
third parties. Such third parties can access information transmitted to, 
processed by and stored on NIWA's IT systems.



From: Qgis-user  on behalf of Dickson 
Taunagita 
Sent: Sunday, January 27, 2019 11:24:12 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)


Hi,

I just downloaded QGIS 3.4.4 and currently (trying to) teach myself and need 
some assistance.


  1.  How can I key in coordinates to add a point in QGIS 3.4.4?
  2.  I am currently experiencing an error in adding an AutoCAD dxf file in 
QGIS 3.4.4.  I am getting the "CRS was undefined ..." error.

Your assistance will be greatly appreciated.

Dickson






___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Didier Peeters]

Hi Dickson, 

Since QGIS 3.x there is an import/export functionality in the Project menu, 
with a specific option for DWG/DXF files.  

Didier

> Le 26 janv. 2019 à 23:24, Dickson Taunagita  a écrit :
> 
> Hi,
> 
> I just downloaded QGIS 3.4.4 and currently (trying to) teach myself and need 
> some assistance.
> 
> How can I key in coordinates to add a point in QGIS 3.4.4?
> I am currently experiencing an error in adding an AutoCAD dxf file in QGIS 
> 3.4.4.  I am getting the "CRS was undefined ..." error.
> Your assistance will be greatly appreciated.
> 
> Dickson
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Jorge Gustavo Rocha]

Hi Helder,

Which style format do you need? Is it a specific Leaflet style format?

Do you use any map server (QGIS Server, Mpaserver, Geoserver, ...) to
provide tiles for your Leaflet client or do you display the shapefile
directly on the client?

Regards,

Jorge Gustavo

Às 22:37 de 19/04/19, Helder Ventura escreveu:
> Good day,
> I would like to know what is the best option to export shape styles
> (and only the styles!) from QGis into GeoJSON or export the styles to
> postgreSQL Database. All this is to be able to load the styles into
> leaflet. I can export the styles into postgresql, and load them in
> QGis, but I can't load them into leaflet.
> I would like some help please.
> Thanks in advance.
> Cumpliments 
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
-- 
Logo*   Geomaster, LDA*
  *VENHA DESCOBRIR O CAMINHO DO OPEN SOURCE CONNOSC**O

*
 
Avenida Barros e Soares
N.º 423, 4715-214 Braga
VAT/NIF510 906 109
Phone  +351 253 680 323
Site   geomaster.pt 
GPS   41.53322, -8.41929


 
Jorge Gustavo Rocha
CTO

Mobile  +351 910 333 888
Email    j...@geomaster.pt


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Hi,
Make sure your base map and the image to be georeferenced are in the same 
coordinates system.  
Nicolas

> Le 28 avr. 2019 à 13:35, Tulika Biswas  a écrit :
> 
> I have an issue with using the georeferencer.My problem is after adding co 
> ordinates to the map and giving the transformation settings.. I am running 
> the georeferencing option.. Then it is being displayed on the screen as
> "Failed to compute GCP points." and the map is also not being shown in the 
> qgis interface..
> Plz  help.. Its very urgent.. 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Kirk Schmidt]

Hi Tulika:

You will need a minimum of 3 GCP's for the algorithm to work. With out 
more detail, it is difficult to determine what the issue is.  Please 
provide more detail and I am sure we can find a solution for you.


Kirk


On 4/28/2019 2:35 PM, Tulika Biswas wrote:
I have an issue with using the georeferencer.My problem is after 
adding co ordinates to the map and giving the transformation 
settings.. I am running the georeferencing option.. Then it is being 
displayed on the screen as
"Failed to compute GCP points." and the map is also not being shown in 
the qgis interface..

Plz  help.. Its very urgent..

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Kirk Schmidt, MScF, BScF, RPF
General Manager
Nortek Resource Solutions Inc.
RR # 1
Thorburn, NS
B0K 1W0
Tel (902) 922.3607
Email: k...@nortekresources.com
Web: www.nortekresources.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alton Teague]

oops - forgot to insert that before editing
/etc/apt/sources.list

I had attempted sudo apt remove qgis which surprisingly said it was
updating a bunch of dependencies.  The system did act as if qgis had
actually been removed before I added the new repository.


On Sun, Jul 28, 2019 at 9:45 PM Alton Teague 
wrote:

> New to qgis. I am still running Ubuntu 16.04-LTS because many applications
> break on 18.04-LTS.
>
> Is there any way to git clone the latest version or download a tarball or
> a complete .deb that just simply installs or updates an older version?
>
> First, someone told me to just
> sudo apt-get install qgis
> It turned out to be version 2.18, and I discovered that a few features he
> had working properly did not work properly on my machine. So I started
> googling for how to get the latest version when he told me had version
> 3.something on his Debian machine.
>
> I think I followed the instructions properly on
> https://qgis.org/en/site/forusers/alldownloads.html#debian-ubuntu
>
> I edited
> /etc/apt/sources.list
> and added the lines
>
> #QGIS repository
> deb https://qgis.org/ubuntu xenial main
> deb-src https://qgis.org/ubuntu xenial main
>
> Then I attempted
>
> sudo apt-get update
> sudo apt-get install qgis python3-qgis qgis-plugin-grass
>
> It complained with an error, "unable to find python3-qgis" (or possibly
> "cannot find python3-qgis") and terminated.
>
> So I shortened it to
> sudo apt-get install qgis qgis-plugin-grass
>
> to try and force it to either complain about missing dependencies, or
> actually go fetch them. However, it completed with no complaints.
> qgis desktop and qgis browser showed up in the installed software list,
> and desktop started without complaining about missing dependencies or
> similar issues.
>
> What launched is QGIS 2.18, with a "helpful" banner across the bottom that
> 3.8.1 is available. This of course took me around the circle again, to the
> same instructions that either I'm getting senile and missed something, or
> there's an error or two in the posted instructions.
>
> So - how do I clean out all the vestiges of qgis 2.18 to try again with a
> clean slate, where it won't just merrily go get 2.18 again from the wrong
> depository? Is there some workaround to gain positive control over which
> version is fetched, e.g. a place to download a complete .deb archive that
> it can be installed from, or a git clone or some other method?
>
> Thanks. I've spent about 4 hours trying to get the later version on this
> machine with no success and finally gave up. So I figured I'd better ask
> the experts what implied step(s) were missed in doing the update.
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt]

What version of QGIS are you using, how are you loading the plugin, and what 
error messages are you receiving?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Akbar 
Ahmadi
Sent: Tuesday, 20 August 2019 4:03 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

 

Dear Sir

 

I cannot install Lizmap plugin can you assist me to install it?

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt]

As QGIS 2.X is no longer supported I would start by updating to at least the 
latest long term release version (3.4.11 for windows) and having another try at 
loading the plugin.

 

https://qgis.org/en/site/forusers/download.html

 

Version 3 will load to a new directory if you accept all the defaults.

 

Cheers - Phil

 

 

From: Akbar Ahmadi [mailto:akbarahmady2...@gmail.com] 
Sent: Tuesday, 20 August 2019 4:17 PM
To: Phil Wyatt; qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] (no subject)

 

I use QGIS 2.4.0 version 

And error message are in enclosed file

 

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

From: Phil Wyatt <mailto:p...@wyatt-family.com> 
Sent: Tuesday, August 20, 2019 10:45 AM
To: 'Akbar Ahmadi' <mailto:akbarahmady2...@gmail.com> ; 
qgis-user@lists.osgeo.org
Subject: RE: [Qgis-user] (no subject)

 

What version of QGIS are you using, how are you loading the plugin, and what 
error messages are you receiving?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Akbar 
Ahmadi
Sent: Tuesday, 20 August 2019 4:03 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

 

Dear Sir

 

I cannot install Lizmap plugin can you assist me to install it?

 

 

Best Regards,

Akbar Ahmadi

Akbar Ahmadi

Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com   

Skype  akbarahmady2002

 

 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Akbar Ahmady]

can you assist me how i can export my QGIS 2.4.0 version project to web
with this capacity which we can have the layer and attribute table with
together?

best
Ahmadi

On Tue, Aug 20, 2019 at 3:49 PM Phil Wyatt  wrote:

> As QGIS 2.X is no longer supported I would start by updating to at least
> the latest long term release version (3.4.11 for windows) and having
> another try at loading the plugin.
>
>
>
> https://qgis.org/en/site/forusers/download.html
>
>
>
> Version 3 will load to a new directory if you accept all the defaults.
>
>
>
> Cheers - Phil
>
>
>
>
>
> *From:* Akbar Ahmadi [mailto:akbarahmady2...@gmail.com]
> *Sent:* Tuesday, 20 August 2019 4:17 PM
> *To:* Phil Wyatt; qgis-user@lists.osgeo.org
> *Subject:* RE: [Qgis-user] (no subject)
>
>
>
> I use QGIS 2.4.0 version
>
> And error message are in enclosed file
>
>
>
>
>
>
>
> Best Regards,
>
> Akbar Ahmadi
>
> *Akbar Ahmadi*
>
> Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com
>
> Skype  akbarahmady2002
>
>
>
> *From: *Phil Wyatt 
> *Sent: *Tuesday, August 20, 2019 10:45 AM
> *To: *'Akbar Ahmadi' ;
> qgis-user@lists.osgeo.org
> *Subject: *RE: [Qgis-user] (no subject)
>
>
>
> What version of QGIS are you using, how are you loading the plugin, and
> what error messages are you receiving?
>
>
>
> Cheers - Phil
>
>
>
> *From:* Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] *On Behalf
> Of *Akbar Ahmadi
> *Sent:* Tuesday, 20 August 2019 4:03 PM
> *To:* qgis-user@lists.osgeo.org
> *Subject:* [Qgis-user] (no subject)
>
>
>
> Dear Sir
>
>
>
> I cannot install Lizmap plugin can you assist me to install it?
>
>
>
>
>
> Best Regards,
>
> Akbar Ahmadi
>
> *Akbar Ahmadi*
>
> Email  akbar.ahm...@akdn.org   akbarahmady2...@gmail.com
>
> Skype  akbarahmady2002
>
>
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Hi,
you probably have to install additional libraries. Please paste here the text 
of the error message, and check the plugin requirements.
Cheers.

On 26 October 2019 16:08:28 CEST, CAHYO WIDODO  
wrote:
>I want to use qmarxan, but I can't installed. There are announcements
>py2
>install. How about this solution?

-- 
Please excuse my brevity.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Raymond Nijssen]

Hi Carolina,

The tiff file does not contain the style but only the data. Both 
applications will somehow guess what would be a nice visualization of 
this, and they take different guesses.


The good news is that you can change the layer style in both 
applications. In QGIS you can set it to "singleband gray" to get what 
ArcMap made for you.


If you want ArcMap to show your layer in the QGIS style you need to 
change the symbology too, but I don't know what that is called. Probably 
something called "unique values" or "discrete". Otherwise ask some 
ArcPeople on an ArcForum. ;)


Good luck,
Raymond


On 27-10-19 21:07, Carolina Rey wrote:

Hello everyone!

I tried to open in ArcMap a tif created in QGIS. The classes in QGIS are 
3, with 3 colours. In ArcMap it is opened not „discret“ but „continual“ 
although of course it should be the same. How could I visualize it like 
in QGIS?


See ScreenShot below

Thanks!

Kind regards

Carolina

QGIS:

ArcMap:


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Matthias Kuhn]

Hi Norman,

Can you try to create a new user profile?

QGIS 3.8 is end of life, better upgrade to QGIS 3.10

Best regards

Matthias

On 2/14/20 6:41 PM, Norman Trowell wrote:
I have qgis 3.8 installed. I can't see status ball and don't see 
maimize button in upper left corner

*Norm Trowell*
*25 Lancaster Drive*
*Sudbury, Ontario*
*P3E 3R5*
**
*Phone:705-670-8281*
*Email:trowel...@gmail.com *
**
**
*

*
*
*
*
*
*
*

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Bonjour,

Do you have access to the layer panel?  You tried to right click on a layer and 
you don’t see the properties window?

Nicolas Cadieux
Ça va bien aller!

> Le 4 avr. 2020 à 11:56, David Bouchard  a écrit :
> 
> 
> Hi,
>  
> I am using qgis 3.12 and i am no longer able to access the properties of my 
> layers. Is there anybody who had this problem?
> I tried uninstalling everything, but it did not work, im kind of blocked 
> right now.
>  
> Any help would be appreciated,
>  
> Have nice day,
>  
> David
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alexandre Neto]

Olá Tiago,

You can do what you want by using select by expression and then use the
count aggregate function:

https://docs.qgis.org/3.10/en/docs/user_manual/working_with_vector/expression.html?highlight=expression#aggregates-functions


Anything where count > 1 should be a duplicate


Count("my_field", group_by:="my_field") > 1


Alexandre Neto

QGIS Support

www.qcooperative.net


A segunda, 13/04/2020, 03:27,  escreveu:

> Hi guys, I would like to know how do I select the registers with the same
> value repeated in the same field (text or numbers) in a table of atributts,
> and only those registers. I Know that is posible using select by atributtes
> but i need especify those atributes, is not the case. I want to select
> everyone with one or more duplicates value in the same field without
> necessary to know which are repeated.
>
>
>
> Sorry for the bad english, as QGIS i’m still learning.
>
>
>
> Best Regards,
>
>
>
> Tiago (from Brazil)
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[qgis-user]

  
  
On 5/5/2020 4:30 PM, Antonio Corbo
  wrote:

Salve,
  ho un problema e non so come risolverlo, Spero che possiate
aiutarmi.
  Qual sono i passaggi per fare delle channels network and
drainage basins from SAGA?
  Io so che è necessario un DEM(che ho) da cui si ricava un TPI
e un DWI che uniti danno cost surface. Ma purtroppo non conosco
bene i passaggi per ottenere tutto questo. Potete aiutarmi? 
  Grazie in anticipo

Translation:
Hello,
i have a problem and i don't know how to solve it, i hope you can help me.
What are the steps to make channels network and drainage basins from SAGA?
I know that a DEM is needed (which I have) from which a TPI and a DWI are obtained which together give cost surface. But unfortunately I don't know the steps to get all this well. Can you help me?
Thanks in advance


  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Philip Barlow]

Hi

As a quick fix have you considered using the flatpak version? It is self 
contained so has all of its dependencies bundled with it.

https://flatpak.org/setup/Ubuntu/

Its well maintained I think, and its the LTR version.

Phil



From: Qgis-user [qgis-user-boun...@lists.osgeo.org] on behalf of Maria Fernanda 
Obando Picado [mari...@gmail.com]
Sent: 18 June 2020 13:25
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

Hi! Thanks for incluiding me.

I changed from Ubuntu 18.04 to Ubuntu 20.04, so I automaticly lost the qgis 
software. When I tryed to install it again, many troubles came out, like "qgis 
needs 'this' or 'this' but its not going to be install" or 'its going to 
install 'this' in stand of 'this'; "E: the package its not found" and also "you 
have broken packages". I tryed to erase old packages, tryed to clean caché, 
tryed commands like "autoremove", "autoclean", "sudo apt-get -f install' and i 
followed all the suggested steps from the qgis original tutorial but nothing 
worked!

Its there any other suggestions about how to install qgis? this vertion is 
actually working?  I even tryed to install qgis copying from the terminal to 
the repository both latest versions 
(https//:qgis.org/ubuntu and 
https//:qgis.org/ubuntu-ltr)

Please, anything will help, i'm in the middle of my final work to get a master 
degree and i already lost 2 days trying to fix this. My plan B is just, get 
back to Ubuntu 18, but its possible that that doesnt work easily anyway.

Thanks for your atention!

Regards.

Mae'r Awdurdod yn hapus i gyfathrebu yn Gymraeg neu yn Saesneg

The Authority is happy to communicate in Welsh or English


*** 
Website www.pembrokeshirecoast.org.uk
Follow us on Twitter 
Join us on Facebook
Watch us on Youtube 
Look at us on Flickr


This email and any attached files should only be read by those persons to whom
they are addressed and be used by them only for their intended purpose.
If you are not the intended recipient please destroy all copies and inform the
sender by return email.

Please note that the contents of this email may be subject to public disclosure 
under the Freedom of Information Act 2000 and therefore the confidentiality of 
this message and any reply cannot be guaranteed.

Click here to view PCNPA Privacy Notice – Keeping your Information Safe

For further information on the PCNPA please visit our website at 
www.pembrokeshirecoast.org.uk

Please consider the environment before printing this email.

Dim ond y personau hynny yr anfonwyd yr e-bost hwn atynt ac unrhyw ffeiliau 
sydd 
ynghlwm ddylid eu darllen, a dim ond hwy ddylid eu defnyddio at y diben y 
bwriadwyd hwy. 
Os nad y chi yw'r person y bwriadwyd eu derbyn a fyddech gystal â dinistrio pob 
copi a rhoi 
gwybod i'r anfonwr gyda throad yr e-bost.

Noder os gwelwch yn dda y gall cynnwys yr e-bost hwn orfod cael ei ddatgelu i'r 
cyhoedd o 
dan Deddf Rhyddid Gwybodaeth 2000 ac felly ni ellir gwarantu cyfrinachedd y 
neges hon 
nac unrhyw ateb. 

Cliciwch yma i weld Hysbysiad Preifatrwydd APCAP - Cadw eich Gwybodaeth yn 
Ddiogel 

Am ragor o wybodaeth am APCAP ymwelwch â'n gwefan ar www.arfordirpenfro.org.uk 

Ystyrier yr amgylchedd cyn argraffu'r e-bost hwn os gwelwch yn dda.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Wouter Impens]

Hi Maria,

I recently started as a Linux newbie on Ubuntu 20.04 and I managed to 
install QGIS following the steps on 
https://www.qgis.org/nl/site/forusers/alldownloads.html#debian-ubuntu



Kind regards

Wouter


Op 18-06-2020 om 14:25 schreef Maria Fernanda Obando Picado:

Hi! Thanks for incluiding me.

I changed from Ubuntu 18.04 to Ubuntu 20.04, so I automaticly lost the 
qgis software. When I tryed to install it again, many troubles came 
out, like "qgis needs 'this' or 'this' but its not going to be 
install" or 'its going to install 'this' in stand of 'this'; "E: the 
package its not found" and also "you have broken packages". I tryed to 
erase old packages, tryed to clean caché, tryed commands like 
"autoremove", "autoclean", "sudo apt-get -f install' and i followed 
all the suggested steps from the qgis original tutorial but nothing 
worked!


Its there any other suggestions about how to install qgis? this 
vertion is actually working?  I even tryed to install qgis copying 
from the terminal to the repository both latest versions 
(https//:qgis.org/ubuntu  and 
https//:qgis.org/ubuntu-ltr )


Please, anything will help, i'm in the middle of my final work to get 
a master degree and i already lost 2 days trying to fix this. My plan 
B is just, get back to Ubuntu 18, but its possible that that doesnt 
work easily anyway.


Thanks for your atention!

Regards.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Stephen Bosch]

Hi Fred,

To help us help you, please

- formulate your question more clearly. What exactly are you trying to do?
What behaviour do expect? What behaviour are you getting?
- provide a link to the specific tutorial page you are following.
- let us know what version of QGIS you are using and on which operating
system.

Have you posted a question on Stack Exchange? If so, please provide a link.

Thanks

Stephen


On Tue, May 30, 2017 at 6:33 PM, Fred Ralston 
wrote:

> Hi
>
> I have been trying to learn how to use QGIS following the QGIS online
> tutorial. I am on lesson 6.2 part 2. Though I am still struggling to work
> out how to do this as my area of my places layer should be a different
> colour which I have tried to change but I don't know how as its shows as
> green on the tutorial but white at the moment does anyone know about this?
> .Also I can't see a line of crosses, points opposite the nodes by the
> polygon  so I don't know how to do this does any know how to correct this,
> sort it out?. Also each of the layers appear as symbols which I can't
> find,remember this being in the tutorial does anyone know how to change
> these layers so there are symbols.  I am basically just stuck on this
> lesson which I am finding very tricky and I badly need help with this. I
> have tried Stack Exchange but to no avail.
>
> Kind Regards
>
> Fred Ralston
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Tudorache, Marian]

Hi Fred,

You include quite a lot of questions.
Changing layer color is done by styling.
You click right on the layer and choose properties. Go to the tab Style.
You can change the color of the features displayed in your layer, the 
transparency, unit of measurements etc.

Also I can't see a line of crosses, points opposite the nodes by the polygon  
so I don't know how to do this does any know how to correct this, sort it out?
I think you refers to the points which build a specific feature.
If you use vectorial layers there are three types: points, lines and polygon. 
You cannot have a layer with mixed types.
When you work with point layers it is simple. Each feature on the layer is a 
point.
When you work with lines you see the lines which connect the point defined by 
your clicks on the canvas.
If you want to visuals those  points you need to have the layer in edit mode 
and select a specific line feature, You can see the defined points by a small 
red x.
The same with polygon layer type.

Be aware the lines which are drawn manually are simple. They do not follow the 
contour of the earth like Great Circle, Rhumble lines. If you want to draw a 
great circle line you need create plugin or used one of the plugins which exist.
You have all kind of processing algorithm which can operate on you layers.

Changing the layer symbols.
You can change the symbol but not the layer type. Go to layer style as I 
explained above.

Do I answer to your questions?

Marian

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Fred 
Ralston
Sent: May-30-17 12:34 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)


Hi

I have been trying to learn how to use QGIS following the QGIS online tutorial. 
I am on lesson 6.2 part 2. Though I am still struggling to work out how to do 
this as my area of my places layer should be a different colour which I have 
tried to change but I don't know how as its shows as green on the tutorial but 
white at the moment does anyone know about this? .Also I can't see a line of 
crosses, points opposite the nodes by the polygon  so I don't know how to do 
this does any know how to correct this, sort it out?. Also each of the layers 
appear as symbols which I can't find,remember this being in the tutorial does 
anyone know how to change these layers so there are symbols.  I am basically 
just stuck on this lesson which I am finding very tricky and I badly need help 
with this. I have tried Stack Exchange but to no avail.

Kind Regards

Fred Ralston



This electronic message, as well as any transmitted files included in the 
electronic message, may contain privileged or confidential information and is 
intended solely for the use of the individual(s) or entity to which it is 
addressed. If you have received this electronic message in error please notify 
the sender immediately and delete the electronic message. Any unauthorized 
copying, disclosure or distribution of the electronic message is strictly 
forbidden. NAV CANADA accepts no liability for any damage caused by any virus 
and/or other malicious code transmitted by this electronic communication.

Le pr?sent message ?lectronique et tout fichier qui peut y ?tre joint peuvent 
contenir des renseignements privil?gi?s ou confidentiels destin?s ? l'usage 
exclusif des personnes ou des organismes ? qui ils s'adressent. Si vous avez 
re?u ce message ?lectronique par erreur, veuillez en informer l'exp?diteur 
imm?diatement et supprimez le. Toute reproduction, divulgation ou distribution 
du pr?sent message ?lectronique est strictement interdite. NAV CANADA n'assume 
aucune responsabilit? en cas de dommage caus? par tout virus ou autre programme 
malveillant transmis par ce message ?lectronique.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Andreas Neumann]

You have to decide for one zone and then you can reproject data from 
the other zone. QGis does it automatically on the fly (your data stays 
in the original projection).


You could also decide to reproject data from both zones to a different 
projection.


Have a look at the project settings and enable "On the fly 
reprojection". Also make sure your input data has the proper projection 
information assigned.


Hope this helps,
Andreas

On Thu, 28 Jun 2012 05:02:39 -0500, Sergio Zárate wrote:

Message: 1
 Date: Wed, 27 Jun 2012 23:11:20 -0300
 From: Marcos
 To: qgis-user@lists.osgeo.org [2]
 Subject: [Qgis-user] Serious doubt
 Message-ID:
        
 Content-Type: text/plain; charset="iso-8859-1"

Hello list,

Somebody knows a way to put together two different zones projected on
UTM
 at the same project on QGis?
 I?m trying to find some documentation, but, at the moment, nothing.

Thanks in advance,

--
 Marcos Eichemberger Ummus
 Tel.: +55 11 8059-8091

*
 *

Interesting questionb. I do not know how, but if needed, I have done
it by selecting the UTM zone of your preference within which you want
to merge together in a map (e.g., zone 13 and 14 North), and 
represent

them "slanted on the fly." Yet, how does Google Earth do that and get
a "flat" map?  --
Dr. Sergio Zárate Pedroche
José María Arroyo 228
Col. 22 de octubre
Morelia, Michoacán
C.P. 58341
México

Teléfono: (443) 352-5307
Celular: (443)  438-6212


Links:
--
[1] mailto:marcos.um...@gmail.com
[2] mailto:qgis-user@lists.osgeo.org
[3]

mailto:cahqzexezpwkeekjxvjnzc%2bnqgnnp0o%2bwp_cghzw0v28wfjm...@mail.gmail.com


--
--
Andreas Neumann
Böschacherstrasse 10A
8624 Grüt (Gossau ZH)
Switzerland
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Ramon Andiñach]

On 01/09/2012, at 22:34, Clinton E-Davidson  wrote:

> Pls I'm a new user and trying to create a subset on my raster but I get the 
> following: "Computed -srcwin falls outside raster size of 2808x3453". Please, 
> how do I resolve this.

I'm probably not going to help much. 
Does it help if the image and project are in the same CRS (datm/projection)?

Otherwise, some more information will help. 
Does QGIS give any more error message?
Which version of QGIS are you using?
Which OS?
Are you trying to do this through GDAL tools ( the raster menu) or some other 
way?

-ramon. ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Clinton E-Davidson]

Thanks Ramon,

I,m using the latest qgis 1.8

there is no other error message and Im using the Gdal tools. I dont understand 
OS.

Thanks again.

Clint




 From: Ramon Andiñach 
To: "Qgis-user@lists.osgeo.org"  
Sent: Sunday, September 2, 2012 3:38 AM
Subject: Re: [Qgis-user] (no subject)
 



On 01/09/2012, at 22:34, Clinton E-Davidson  wrote:


Pls I'm a new user and trying to create a subset on my raster but I get 
the following: "Computed -srcwin falls outside raster size of 
(1 x 1) 2808x3453". Please, how do I resolve this.

I'm probably not going to help much. 
Does it help if the image and project are in the same CRS (datm/projection)?

Otherwise, some more information will help. 
Does QGIS give any more error message?
Which version of QGIS are you using?
Which OS?
Are you trying to do this through GDAL tools ( the raster menu) or some other 
way?

-ramon. 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Ing. Juan M. Bernales]

OS= Operative System

From: Clinton E-Davidson 
Sent: Sunday, September 02, 2012 4:01 PM
To: Ramon Andiñach 
Cc: Qgis-user@lists.osgeo.org 
Subject: Re: [Qgis-user] (no subject)

Thanks Ramon,

I,m using the latest qgis 1.8

there is no other error message and Im using the Gdal tools. I dont understand 
OS.


Thanks again.


Clint




From: Ramon Andiñach 
To: "Qgis-user@lists.osgeo.org"  
Sent: Sunday, September 2, 2012 3:38 AM
Subject: Re: [Qgis-user] (no subject)



On 01/09/2012, at 22:34, Clinton E-Davidson  wrote:


  Pls I'm a new user and trying to create a subset on my raster but I get the 
following: "Computed -srcwin falls outside raster size of (1 x 1) 2808x3453". 
Please, how do I resolve this.


I'm probably not going to help much. 
Does it help if the image and project are in the same CRS (datm/projection)?

Otherwise, some more information will help. 
Does QGIS give any more error message?
Which version of QGIS are you using?
Which OS?
Are you trying to do this through GDAL tools ( the raster menu) or some other 
way?

-ramon. 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user






___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Etienne Tourigny]

Windows/MacOSX / Linux - and which version

On Sun, Sep 2, 2012 at 6:05 PM, Ing. Juan M. Bernales
 wrote:
> OS= Operative System
>
> From: Clinton E-Davidson
> Sent: Sunday, September 02, 2012 4:01 PM
> To: Ramon Andiñach
> Cc: Qgis-user@lists.osgeo.org
> Subject: Re: [Qgis-user] (no subject)
>
> Thanks Ramon,
>
> I,m using the latest qgis 1.8
> there is no other error message and Im using the Gdal tools. I dont
> understand OS.
>
> Thanks again.
>
> Clint
>
> 
> From: Ramon Andiñach 
> To: "Qgis-user@lists.osgeo.org" 
> Sent: Sunday, September 2, 2012 3:38 AM
> Subject: Re: [Qgis-user] (no subject)
>
>
> On 01/09/2012, at 22:34, Clinton E-Davidson  wrote:
>
> Pls I'm a new user and trying to create a subset on my raster but I get the
> following: "Computed -srcwin falls outside raster size of (1 x 1)
> 2808x3453". Please, how do I resolve this.
>
>
> I'm probably not going to help much.
> Does it help if the image and project are in the same CRS (datm/projection)?
>
> Otherwise, some more information will help.
> Does QGIS give any more error message?
> Which version of QGIS are you using?
> Which OS?
> Are you trying to do this through GDAL tools ( the raster menu) or some
> other way?
>
> -ramon.
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Johan Nilsson]

In the bottom of the message there are a link, but I put it here also:
http://lists.osgeo.org/mailman/listinfo/qgis-user

There you can unsubscribe

/Cheers


2013/3/3 Karim Mata 

> How can I unsubscribe so that I can stop receiving communications from
> QGIS?
> My inbox has limits!
> Cheers
>
> K
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Shriramana Sharma]

On Thu, Jan 2, 2014 at 9:16 AM, herath kumara  wrote:
> Name mail  herath...@gmail.com
> Password 0718999012

Hello. Please NEVER send your mail password on to a public list.
Please immediately change your gmail password.

If you have a big file, please upload it somewhere like rapidshare and
send the link to the list. Please also clearly state your problem so
others can help you.

@List admin please delete the mail from the archives.

-- 
Shriramana Sharma ஶ்ரீரமணஶர்மா श्रीरमणशर्मा
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Akinyemi Emmanuel]

I concur.
On Jan 2, 2014 5:26 PM, "Shriramana Sharma"  wrote:

> On Thu, Jan 2, 2014 at 9:16 AM, herath kumara  wrote:
> > Name mail  herath...@gmail.com
> > Password 0718999012
>
> Hello. Please NEVER send your mail password on to a public list.
> Please immediately change your gmail password.
>
> If you have a big file, please upload it somewhere like rapidshare and
> send the link to the list. Please also clearly state your problem so
> others can help you.
>
> @List admin please delete the mail from the archives.
>
> --
> Shriramana Sharma ஶ்ரீரமணஶர்மா श्रीरमणशर्मा
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Richard Duivenvoorde]

On 02-01-14 14:14, Willem Korevaar wrote:
> As a geographer teacher I want my students to use Qgis in their spatial
> investigations, using their own data. What I want them to do with GIS is
> to get a rank correlationcoefficient (Rs) using their attribuut data.So
> they have for instance two layers with the same objects (neigbourhoods)
> but with different data ( columns like income and  % shops) . How can
> you use Qgis to get that Rs between income and %shops?
> I can do that in EXcel by copying both columns , rank them and get a
> fomula to get it, but I like to do this directly in Qgis. Is there a way
> (not too complicated I hope)?

Hi Willem,

mmm, rank correlation coefficient... [0] ?

it is not clear to me if you really need two layers. Does your (spatial)
data have both columns income and %shops?
If so, there is no need to load the layer twice, but you can use the
Field Calculator (see [1]) to create/calculate the value via the
creation of your formula using the values of the two columns.

if the data is NOT in the same dataset (eg you have a shp file with
zip-codes and and excel file with columns), you could create a join
first between those two datasets and THEN use the field calculator.

but to be honest, statistics is not my stronges point :-(
so please correct me if I'm wrong.

Regards,

Richard Duienvoorde

[0] http://en.wikipedia.org/wiki/Spearman%27s_rank_correlation_coefficient

[1]
http://qgis.org/en/docs/user_manual/working_with_vector/field_calculator.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Jan Michálek]

You must compile gdal with OGDI library, replace your gdal in qgis with
this new gdal.


2014-04-01 15:01 GMT+02:00 Thomas Ferris :

> Hello,
>
> I'm new to QGIS.  I was hoping that someone can answer a very basic
> question for me.
>
> Can QGIS display Digital Nautical Chart (DNC) data in Vector Product
> Format (VPF) from the National Geospatial Intelligence Agency of the United
> States government?  Here's a web page describing these DNCs.
>
>
> https://www1.nga.mil/ProductsServices/NauticalHydrographicBathymetricProduct/Pages/DigitalNauticalChart.aspx
>
> The Supported Data Formats page under the User Manual section of the QGIS
> website provides the following link:
>
> http://www.gdal.org/ogr/ogr_formats.html
>
> This page says that the OGDI libray, which is necessary for VPF data, is
> not compiled into the OGR library by default.
>
> This is why I'm asking the question.
>
> Thank You in advance,
>
> Mark
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Werner Macho]

Hi!

There is a link at the bottom in every mail coming from this list:

http://lists.osgeo.org/mailman/listinfo/qgis-user

And the same way you managed to assign to the list you are able to resign from 
the list.

Hope this helps
Kind regards
Werner


On 04/22/2014 09:55 AM, Rahime GÜNAY wrote:


Hello,

I do not want to get more emails from Qgis-user email list.

Thank you,

Best.

*/Rahime GÜNAY/*

*İSBAK A.Ş. | CBS Uzmanı *

*Etüt ve Planlama Müdürlüğü*

rgu...@isbak.com.tr 
***|***www.isbak.com.tr 



*/Merkez (Head office) : /*Seyrantepe Mah. Cendere Caddesi No:56 
Kağıthane/İSTANBUL


41° 05’ 44.83’’ K, 28° 58’ 58.83’’ D

Tel: +90 (212) 301 90 00 D:352*| *Faks: +90 (212) 294 29 06

*/Teknokent Ofis (Technopark office):/*İTÜ Arı Teknokent Teknoloji 
Geliştirme Bölgesi ARI 1 Binası No:19 Maslak/İSTANBUL


41° 06' 21.81" K, 29° 0' 58.79" D

Tel: +90 (212) 285 08 10 D: *| *Faks:+90 (212) 285 08 70

avrupasporbaşkenti




Bu mesaj ve ekleri, mesajda gonderildigi belirtilen kisi/kisilere 
ozeldir ve gizlidir. Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin 
gizliligi ve bu gizlilik yukumlulugune
uyulmasi zorunlulugu tarafiniz icin de soz konusudur. Mesaj ve 
eklerinde yer alan bilgilerin dogrulugu ve
guncelligi konusunda gonderenin ya da sirketimizin herhangi bir 
sorumlulugu bulunmamaktadir. Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec 
ulasmasindan, butunlugunun ve gizliliginin
korunamamasindan, virus icermesinden ve bilgisayar sisteminize 
verebilecegi herhangi bir zarardan

sorumlu tutulamaz.

This message and attachments are confidential and intended solely for 
the individual(s) stated in this
message. If you received this message although you are not the 
addressee, you are responsible to keep the
message confidential. The sender has no responsibility for the 
accuracy or correctness of the
information in the message and its attachments. Our company shall have 
no liability for any changes
or late receiving, loss of integrity and confidentiality, viruses and 
any damages caused in

anyway to your computer system.


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alex Mandel]

What tool in QGIS are you using to adjust the raster? Can you please
include the exact command you are currently using.

If you are using something from the Raster Menu (aka GDAL Tools) then
you need to set the compression and type of number manually.

The type of number stored dictates a large amount of overhead, there is
a huge difference between Integer and Float.

-co COMPRESS=LZW  -ot Int16

See http://www.gdal.org/gdal_translate.html for options. Pick the
smallest type of number storage that holds your data correctly. Most
GDAL tools will default to Float, that is likely the difference.

Thanks,
Alex

On 07/26/2014 06:35 AM, Peter Versteeg wrote:
> Hello,
> 
> I use arcmap desktop 10.2.2. In the workflow i use atm i make a geotiff
> using the export map option in arcmap.
> 
> I need 4000dpi and i use geotiff tags and compression (LZW).
> 
> The resolutions of my geotiff is.
> 
> See png
> 
> [image: rasterinfo.png]
> 
> 
> I use the geotiff as raster for a 3D simulation. The software i use for
> this needs a specific resolution.
> 
> They need to by in the power of 2.  So the rows and columns need to by
> 4096, 8192, 16384, 32768, 65536, 131072 etc.
> 
> I use QGIS to adjust the resolution. see png
> 
> [image: rasterqgis.png]
> 
> 
> 
> 
> What i found out is that QGIS is not good with compression. My arcmap
> export fire is 120k. The file QGIS makes is 6292k without compression and
> 4194 with compression.
> 
> 
> 
> Also the low and high compression file size is the same and JPEG is not
> working.
> 
> 
> 
> Why is the file size so big and what can i do about it.
> 
> 
> 
> thank you and greetings Peter
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
> 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 04/11/2014 16:43, laura guy ha scritto:
> Hi,
> 
> I am trying to install and use Open Layers Plugin in QGIS version 2.4.0

Laura: first of all, please upgrade to qgis 2.6 and see if the problem persist.
all the best.

-- 
Paolo Cavallini - www.faunalia.eu
Corsi QGIS e PostGIS: http://www.faunalia.eu/training.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[zehari]

Dear all,
I'm apologize, I mean,  in my qgis 2.6, the problem just only on print
composers.

best
zehari


On Sat, Dec 6, 2014 at 4:12 PM, zehari  wrote:

> Dear all,
> Print Composers in QGIS 2.6 in my ubuntu does not work.
> program stopped on the menu composer. After that there is no any message.
> what is the problem. Can anyone help me?
> Thanks for the help
>
> Best,
> Zehari
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil (The Geek) Wyatt]

You will need to somehow assign geographic references (Lat/Long) to each 
address. This might be achieved by geocoding from the addresses. Under plugins, 
check if the experimental MMQGIS plugin is loaded. This has a menu item for 
geocoding the addresses from Google and Open Street Mapping.

 

Cheers - Phil

 

From: qgis-user-boun...@lists.osgeo.org 
[mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
labiancamaril...@libero.it
Sent: Tuesday, 27 January 2015 2:20 AM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] (no subject)

 

Dear all,
I should add  a spreadsheet with data containing the addresses of commercial 
activities to be loaded in QGIS.
The spreadsheet (Excel) contains the name, code, complete address, city.
How can I assign these values properly if I want to use open layer plugin with 
a road map of Google?

Thanks

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alexandre Neto]

Helllo abhijeet,

To hide certain columns you need to go to the layer properties - fields
tab. Then, for each of the desired fields, you can set the Edit Widget as
Hidden.

To sort the attribute table by an especific column, all you need to do is
click over the column name. First click will sort it descending, the second
one will sort ascending.

I hope it helps,

Alexandre Neto

On Wed, Feb 4, 2015 at 1:08 PM, HISP.abhijeet 
wrote:

> hi Alexander,
> thanks for replying,
> 1st- suppose i have 10 columns and i want to see only 4 columns.
> 2nd- similarly i want to sort my rows by specifics for eg: in the Name
> column all the attributes with last name SC should be sorted.
> how can i do, what would be the expressions.
> On 4 Feb 2015 6:12 pm, "Alexandre Neto"  wrote:
>
>> Hello abhijeet,
>>
>> Please give use the example of the expression used, and the data
>> structure of your layer.
>>
>> Best regards,
>>
>> Alexandre Neto
>>
>> On Wed, Feb 4, 2015 at 12:32 PM, HISP.abhijeet 
>> wrote:
>>
>>> Hi all,
>>> i am using QGIS 2.4 and i want to do sorting and filtering in attribute
>>> table
>>> in a *vector layer*.
>>> there is an advance filtering option and i tried but failed to do or may
>>> be i am putting the expression wrong.
>>> please can any one help me on this.
>>> *Regards,*
>>>
>>> * Abhijeet*
>>>
>>> ___
>>> Qgis-user mailing list
>>> Qgis-user@lists.osgeo.org
>>> http://lists.osgeo.org/mailman/listinfo/qgis-user
>>>
>>
>>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[HISP.abhijeet]

thanks Alexander, this is helpful. one more thing though, about my 2nd
question apart from ascending and descending, is there any way i can sort
by name like names like 'abc' only.
result should be: all the names having character 'abc' should display.
On 4 Feb 2015 7:23 pm, "Alexandre Neto"  wrote:

> Helllo abhijeet,
>
> To hide certain columns you need to go to the layer properties - fields
> tab. Then, for each of the desired fields, you can set the Edit Widget as
> Hidden.
>
> To sort the attribute table by an especific column, all you need to do is
> click over the column name. First click will sort it descending, the second
> one will sort ascending.
>
> I hope it helps,
>
> Alexandre Neto
>
> On Wed, Feb 4, 2015 at 1:08 PM, HISP.abhijeet 
> wrote:
>
>> hi Alexander,
>> thanks for replying,
>> 1st- suppose i have 10 columns and i want to see only 4 columns.
>> 2nd- similarly i want to sort my rows by specifics for eg: in the Name
>> column all the attributes with last name SC should be sorted.
>> how can i do, what would be the expressions.
>> On 4 Feb 2015 6:12 pm, "Alexandre Neto"  wrote:
>>
>>> Hello abhijeet,
>>>
>>> Please give use the example of the expression used, and the data
>>> structure of your layer.
>>>
>>> Best regards,
>>>
>>> Alexandre Neto
>>>
>>> On Wed, Feb 4, 2015 at 12:32 PM, HISP.abhijeet 
>>> wrote:
>>>
 Hi all,
 i am using QGIS 2.4 and i want to do sorting and filtering in attribute
 table
 in a *vector layer*.
 there is an advance filtering option and i tried but failed to do or
 may be i am putting the expression wrong.
 please can any one help me on this.
 *Regards,*

 * Abhijeet*

 ___
 Qgis-user mailing list
 Qgis-user@lists.osgeo.org
 http://lists.osgeo.org/mailman/listinfo/qgis-user

>>>
>>>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Alexandre Neto]

In that case, you need to use an expression to select the desired rows.

An expression like this will probably work:

"Name_column" LIKE 'abc%'

After this you can click on the bottom left button and choose "Show
selected features only".

If you want to make it more permanent (i.e., not dependent of the selected
features) you can use the expression on the layers filter (right-click the
layer > filter)

Alexandre

On Wed, Feb 4, 2015 at 2:20 PM, HISP.abhijeet 
wrote:

> thanks Alexander, this is helpful. one more thing though, about my 2nd
> question apart from ascending and descending, is there any way i can sort
> by name like names like 'abc' only.
> result should be: all the names having character 'abc' should display.
> On 4 Feb 2015 7:23 pm, "Alexandre Neto"  wrote:
>
>> Helllo abhijeet,
>>
>> To hide certain columns you need to go to the layer properties - fields
>> tab. Then, for each of the desired fields, you can set the Edit Widget as
>> Hidden.
>>
>> To sort the attribute table by an especific column, all you need to do is
>> click over the column name. First click will sort it descending, the second
>> one will sort ascending.
>>
>> I hope it helps,
>>
>> Alexandre Neto
>>
>> On Wed, Feb 4, 2015 at 1:08 PM, HISP.abhijeet 
>> wrote:
>>
>>> hi Alexander,
>>> thanks for replying,
>>> 1st- suppose i have 10 columns and i want to see only 4 columns.
>>> 2nd- similarly i want to sort my rows by specifics for eg: in the Name
>>> column all the attributes with last name SC should be sorted.
>>> how can i do, what would be the expressions.
>>> On 4 Feb 2015 6:12 pm, "Alexandre Neto"  wrote:
>>>
 Hello abhijeet,

 Please give use the example of the expression used, and the data
 structure of your layer.

 Best regards,

 Alexandre Neto

 On Wed, Feb 4, 2015 at 12:32 PM, HISP.abhijeet >>> > wrote:

> Hi all,
> i am using QGIS 2.4 and i want to do sorting and filtering in
> attribute table
> in a *vector layer*.
> there is an advance filtering option and i tried but failed to do or
> may be i am putting the expression wrong.
> please can any one help me on this.
> *Regards,*
>
> * Abhijeet*
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>


>>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Hi, 
Just a guess but would you have mixed objects in your .tab file? ( points, 
lines and polygones). If so, that could be it. 
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
www.archeotec.ca 
Le 2015-02-18 19:09, "Johanna Botman-2 [via OSGeo.org] " 
 a écrit : 


I uploaded a tab file into a SQL database using Easy Loader in MapInfo. I 
overwrote an existing table.(the way all my tables have been loaded). I can see 
the new table in the database list. When I add it to my canvas, it's not 
there. I have Zoomed to Layer, I can see the attributes table. There is 
geometry in the table (I can copy and paste the table contents into Excel). I 
can see the SQL table in MapInfo. It's only in QGIS that I can't see 
it. I don't have any issues with any other table. 

I've investigated on the fly projection and taking that off. All the layers 
should be the same projection anyway. That is set in the server. 

Does anyone have any ideas of how to see my layer? 

___ 
Johanna Botman 
GIS / Assets Officer 


Griffith City Council 
Ph: 02 6962 8168
  
  


This e-mail, together with any attachments, is for the exclusive and 
confidential use of the addressee(s). Confidentiality is not waived if you are 
not the intended recipient. Any other distribution, use of, or reproduction 
without prior written consent is strictly prohibited. 

Views expressed in this e-mail are those of the 
individual, except where specifically stated otherwise. If this e-mail has been 
sent to you in error, please delete the e-mail completely and immediately from 
your system. Although reasonable precautions are taken, Griffith City Council 
does not warrant or guarantee this message to be free of errors, interference, 
viruses or similar malicious code and does not accept liability for any 
consequences to the recipient opening or using this email or 
attachments. 
This email was scanned and cleared by 
MailMarshal & Norman AV 




___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5188562.html 


To start a new topic under Quantum GIS - User, email 
ml-node+s1560n4125267h38@n6.nabble.com 
To unsubscribe from Quantum GIS - User, click here . 
NAML 




--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5188562p5188592.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Kirk Schmidt]

Hi jean:

Another issue is that you can set your elevation reference point in most 
Garmin units to either use the height above the ellipsoid or and 
approximation mean sea level.  This setting will also have an impact on 
your observed elevation.


Kirk Schmidt


On 4/20/2021 8:45 PM, jean Lukusa wrote:

Hi all .
I hope you are doing fine.
I have experienced an issue:
The elevation taken in the field with gps garmin64 is 623 m but the 
one given by SRTM download from Qgis is 612m.

How can I interprete this gap knowing that SRTM resolution is 30 meters.

Jean Lukusa
B.Sc. Geology
Trained on Jorc  Code
GIS  Operator
+243812156128

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Kirk Schmidt, MScF, BScF, RPF
General Manager
Nortek Resource Solutions Inc.
RR # 1
Thorburn, NS
B0K 1W0
Tel (902) 922.3607
Email: k...@nortekresources.com
Web: www.nortekresources.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Zoltán Siki]

Dear Viktoria,

I think the problem is with the network connection or the URL.
Do you want to connect a public server?
Can you access the net?
What if you type in the browser the URL of the WMS server plus
"?service=wms&request=GetCapabilities"?
You should get an XML. Until you don't get this XML QGIS won't work.

Regards,
Zoltan

takacsviki  ezt írta (időpont: 2021. aug. 27., P, 12:39):

> Hi all!
>
> Please help me!! I installed QGIS 3.16. When trying to add a VMS layer, it
> returns me the following message:
>
> Nie powiodło się pobranie Capabilities:Pobieranie "capabilities" nie
> powiodło się: Dostęp do sieci wyłączony. =
> download CApabilities was unsuccessful, the network access is switched
> off.
>
> Should I configure somewhere network connection? What to do and how?
> Previously I have used several versions of QGIS but never had similar
> problems.
>
> Thanks for the help!
>
> Viktoria
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Hi,

You may need to expand a bit on what you mean by “react map”. 

Nicolas Cadieux
https://gitlab.com/njacadieux

> Le 15 janv. 2022 à 13:23, takunda chitambure  a 
> écrit :
> 
> 
> I would like to ask how I can create a react map using qgis
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[chris hermansen via Qgis-user]

Rayfson and list

On Tue, Mar 15, 2022, 13:32 rayfson souza via Qgis-user <
qgis-user@lists.osgeo.org> wrote:

> *OLÁ, SAUDAÇÕES, NÃO CONSIGO INSTALAR AS NOVAS VERSÕES DO QGIS 3.22 NO MEU
> NOVO COMPUTADOR, GOSTARIA MUITO DE ME AJUDAR POR FAVOR.*
>
>
>

Qual sistema operacional? È um Chromebook?


*my pc*
>
> *Processador: Snapdragon (TM) 7c Gen 2 @.55 GHz 2.55 GHz*
>
> *Ram: 4GB*
>
> *Sistema operacional 64 bits, processador baseado em ARM*
>
>
>
> MEU NAME RAYFSON SOUZA DE OLIVEIRA
>
> 5595991166136
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Dave Stevens via Qgis-user]

On Tue, 15 Mar 2022 16:33:40 -0400
rayfson souza via Qgis-user  wrote:

> *OLÁ, SAUDAÇÕES, NÃO CONSIGO INSTALAR AS NOVAS VERSÕES DO QGIS 3.22
> NO MEU NOVO COMPUTADOR, GOSTARIA MUITO DE ME AJUDAR POR FAVOR.*

*HELLO, GREETINGS, I CANNOT INSTALL THE NEW VERSIONS OF QGIS 3.22 ON MY
NEW COMPUTER, WOULD LIKE TO HELP ME PLEASE.* 

I don't know if there is a qgis-ES list but if so you might get better
responses. or Google translate which is what I used.

 Sometimes I wonder
whether the world is being run by smart people who are putting us on or
by imbeciles who really believe it.

Mark Twain
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Patrick Dunford via Qgis-user]

Are packages produced for ARM platforms?

On 17/03/22 05:22, Dave Stevens via Qgis-user wrote:

On Tue, 15 Mar 2022 16:33:40 -0400
rayfson souza via Qgis-user  wrote:


*OLÁ, SAUDAÇÕES, NÃO CONSIGO INSTALAR AS NOVAS VERSÕES DO QGIS 3.22
NO MEU NOVO COMPUTADOR, GOSTARIA MUITO DE ME AJUDAR POR FAVOR.*

*HELLO, GREETINGS, I CANNOT INSTALL THE NEW VERSIONS OF QGIS 3.22 ON MY
NEW COMPUTER, WOULD LIKE TO HELP ME PLEASE.*

I don't know if there is a qgis-ES list but if so you might get better
responses. or Google translate which is what I used.

  Sometimes I wonder
whether the world is being run by smart people who are putting us on or
by imbeciles who really believe it.

Mark Twain
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Diego García del Río via Qgis-user]

Rayfson.

se voce pode escriber en ingles sera muito mais facil para tudo o mundo vc
ajudar.

A gente acha que nao tem pacotes compilados em ARM para o seu computador.
VC esta usando windows o linux  o chromeOS em esa maquina?

saludos


*Diego Garcia del Rio* | CTO | Mediatel S.A. | Tel: +54 11 5218 0463 (x103)
| Cel: +54 9 11 4530-4697 | www.mediatel.com.ar | Juan Carlos Cruz 2360 –
4B (1636), Vicente López, Buenos Aires, Argentina |
https://goo.gl/maps/NZCFPwVkFFf14cR67


On Wed, 16 Mar 2022 at 16:45, Patrick Dunford via Qgis-user <
qgis-user@lists.osgeo.org> wrote:

> Are packages produced for ARM platforms?
>
> On 17/03/22 05:22, Dave Stevens via Qgis-user wrote:
> > On Tue, 15 Mar 2022 16:33:40 -0400
> > rayfson souza via Qgis-user  wrote:
> >
> >> *OLÁ, SAUDAÇÕES, NÃO CONSIGO INSTALAR AS NOVAS VERSÕES DO QGIS 3.22
> >> NO MEU NOVO COMPUTADOR, GOSTARIA MUITO DE ME AJUDAR POR FAVOR.*
> > *HELLO, GREETINGS, I CANNOT INSTALL THE NEW VERSIONS OF QGIS 3.22 ON MY
> > NEW COMPUTER, WOULD LIKE TO HELP ME PLEASE.*
> >
> > I don't know if there is a qgis-ES list but if so you might get better
> > responses. or Google translate which is what I used.
> >
> >   Sometimes I wonder
> > whether the world is being run by smart people who are putting us on or
> > by imbeciles who really believe it.
> >
> > Mark Twain
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Patrick Dunford via Qgis-user]

If they were running a regular linux distro there could possibly be 
builds if the distro provided the software in their own repository.


However, I half expect it's possibly a chromebook that software installs 
won't be possible on.


On 17/03/22 10:23, Diego García del Río wrote:
indeed.. not even sure if its windows or chromeos or plain linux... 
but not sure if there is anything native for arm



*Diego Garcia del Rio*| CTO | Mediatel S.A. | Tel: +54 11 5218 0463 
(x103) | Cel: +54 9 11 4530-4697 | www.mediatel.com.ar 
 | Juan Carlos Cruz 2360 – 4B (1636), 
Vicente López, Buenos Aires, Argentina |

https://goo.gl/maps/NZCFPwVkFFf14cR67


On Wed, 16 Mar 2022 at 16:45, Patrick Dunford via Qgis-user 
 wrote:


Are packages produced for ARM platforms?

On 17/03/22 05:22, Dave Stevens via Qgis-user wrote:
> On Tue, 15 Mar 2022 16:33:40 -0400
> rayfson souza via Qgis-user  wrote:
>
>> *OLÁ, SAUDAÇÕES, NÃO CONSIGO INSTALAR AS NOVAS VERSÕES DO QGIS 3.22
>> NO MEU NOVO COMPUTADOR, GOSTARIA MUITO DE ME AJUDAR POR FAVOR.*
> *HELLO, GREETINGS, I CANNOT INSTALL THE NEW VERSIONS OF QGIS
3.22 ON MY
> NEW COMPUTER, WOULD LIKE TO HELP ME PLEASE.*
>
> I don't know if there is a qgis-ES list but if so you might get
better
> responses. or Google translate which is what I used.
>
>   Sometimes I wonder
> whether the world is being run by smart people who are putting
us on or
> by imbeciles who really believe it.
>
> Mark Twain
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[chris hermansen via Qgis-user]

Takunda Chitambura and list,

On Sat, Jul 16, 2022, 07:16 takunda chitambure via Qgis-user <
qgis-user@lists.osgeo.org> wrote:

> Im trying to combine my csv file with my shapefile but the resultant
> attribute table is showing the joint attributes with null values what could
> be the problem
> __
>

Probably when you imported your . CSV you did not define the types of the
columns, especially the join column, so that the column in the .SHP is say
integer and the matching column is string.

If that's the case, you can either reimport your .CSV taking care to define
the types of the columns or you can add a new column of the appropriate
type (e.g. integer) and use the field calculator to convert the join column
into it, then redo the join on the new column.

Chris

>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Andrea Giudiceandrea via Qgis-user]

*Marco Gómez*
/Sat Jul 23 08:10:06 PDT 2022/

Anular


Hi Marco,
if you want to unsubscribe from this mailing list, you need to do it by 
yourself.


Please follow the link at the bottom of each message: More information 
about the Qgis-user mailing list 
https://lists.osgeo.org/mailman/listinfo/qgis-user
Then insert your e-mail address in the field "To unsubscribe from 
Qgis-user, ... enter your subscription email address:" and click on the 
"Unsubscribe or edit options" button, then click on the "Unsubscribe" 
button, then follow the instructions.


Best regards.

Andrea___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Phil Wyatt via QGIS-User]

Hi there,

I am using 3.22.13 and it shows the values that match as I start typing in
values.

Cheers - Phil

-Original Message-
From: QGIS-User  On Behalf Of Guilherme
Pereira via QGIS-User
Sent: Friday, 23 December 2022 5:58 AM
To: qgis-user@lists.osgeo.org
Cc: Marcia Coelho 
Subject: [Qgis-user] (no subject)

GOOD AFTERNOON,

QGIS DESKTOP USERS, ANYONE WHO CAN HELP ME.

I WAS USING QGIS VERSION 3.10, AND WHEN I USED THE "SELECT FEATURES BY
VALUE" OPTION (SHORTCUT F3), AND WHEN I STARTED TYPING WHAT I NEEDED, THE
SOFTWARE SHOWED THE EXISTING OPTIONS IN THE DATABASE.

BUT NOW I AM USING VERSION 3.22, AND WHEN USING "SELECT FEATURES BY VALUE"
(SHORTCUT F3), THE SOFTWARE DOES NOT SHOW FEATURES WITH NAMES THAT EXIST IN
THE DATABASE.

DOES ANYONE KNOW HOW TO CONFIGURE THIS "SELECTION SUGGESTION" THAT HAS IN
VERSION 3.10?



BOA TARDE,

USUÁRIOS DO QGIS DESKTOP, ALGUÉM QUE POSSA ME AJUDAR.

EU UTILIZAVA A VERSÃO DO QGIS VERSÃO 3.10, E QUANDO EU USAVA A OPÇÃO
"SELECIONAR FEIÇÕES POR VALOR" (ATALHO F3), E AO COMEÇAR DIGITAR  O QUE EU
PRECISAVA, O SOFTWARE MOSTRAVA AS OPÇÕES EXISTENTE NO BANCO DE DADOS.

POREM AGORA EU ESTOU UTILIZANDO A VERSÃO 3.22, E AO USAR "SELECIONAR FEIÇÕES
POR VALOR" (ATALHO F3), O SOFTWARE NÃO MOSTRA AS FEIÇÕES  COM NOMES
EXISTENTE NO BANCO DE DADOS.

ALGUÉM SABE COMO CONFIGURAR ESSA"SUGESTÃO DE SELEÇÃO" QUE TEM NA VERSÃO
3.10?







Antes de imprimir pense em sua responsabilidade e compromisso com o Meio
Ambiente !
As informações contidas neste e-mail, incluindo arquivos anexos, são
confidenciais e dirigidas exclusivamente ao destinatário, podendo estar
legalmente protegidas. Se esta mensagem não for destinada a você, por favor
apague-a e informe imediatamente ao remetente. As opiniões pessoais do
remetente não são, necessariamente, coincidentes com o posicionamento da
empresa, não sendo a Sanasa Campinas responsável pelo conteúdo da mensagem.
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Bonjour,

Je vois que Assabou et Régis vous ont fournit de l'aide.   Je ne connaissais 
pas les list de Régis mais il ne faut pas être gêne de pauser des questions en 
Français sur cette liste.  (Il faut mettre un sujet pour être plus efficace:)

De mon côté, je ne travail pas en  Afrique donc je ne connais pas les données 
disponibles.  De mon côté, lorsque je travail dans une nouvelle région,  
j'utilise Google pour trouver des images, des serveur wms ou des basses de 
données vectoriel.  Il y a toujours la Nasa qui offre des services gratuits.  
Si vous voulez plus d'aide, soyer plus spécifique sur la région d'étude et le 
sujet de recherche et plus de gens pourrons vous aider.

Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc. 
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995
www.archeotec.ca

On Jun 24, 2015 5:48 AM, "Abdoulaye Diallo [via OSGeo.org] " 
 wrote:
>
> >
> > Hello, i want to ask something of QGIS 2.8, but excuse me i don't 
> > speak english very well. then i do my question in french. thanks. 
> > Je veux géo-référencer une image de l’Afrique de l'ouest dans qgis 2.8 
> > à partir d'une carte existante déjà dans une base de données de qgis 
> > et possédant tous les paramètres. Le souci est que je n'arrive pas à 
> > télécharger cette de base dont j'ai besoin. J’ai téléchargé le 
> > logiciel mais je n'ai aucune base de données à ma disposition. De 
> > plus, comment procéder pour télécharger des cartes de pays du 
> > continent africain en dehors des données vecteurs et des images 
> > satellites. Merci d'avance pour votre aide. Cordialement, 
> > Système PC: windows 8 
> > GIS: 2.8 
> > Date: 24/06/2015 
> > Name: Abdoulaye, étudiant master II de Géographie (Gestion des 
> > ressources naturelles). Burkina Faso 
> > ___ 
> > Qgis-user mailing list 
> > [hidden email] 
> > http://lists.osgeo.org/mailman/listinfo/qgis-user 
> >
> > 
> > If you reply to this email, your message will be added to the discussion 
> > below:
> > http://osgeo-org.1560.x6.nabble.com/no-subject-tp5212630.html
> > To start a new topic under Quantum GIS - User, email 
> > ml-node+s1560n4125267...@n6.nabble.com 
> > To unsubscribe from Quantum GIS - User, click here.
> > NAML



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5212630p5212739.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Ramon Andiñach]

Hi there, 

You get to opt in and opt out of this list by yourself. 

At the bottom of this (and every other qgis-user) email is a link. If you 
follow that, you'll find a way to do achieve your goal.

-ramon.

> On 1 Jul 2015, at 19:00, Lloyd Julius  wrote:
> 
> Please remove me from all your lists. I do not want to receive any mail
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 19/07/2015 19:41, Abdoulaye Diallo ha scritto:
> Bonjour à tous. J’utilise QGIS 2.8.1  et 2.0. Sur mon appareil
> (Windows 8, 64 bits) et je rencontre quelques difficultés. En effet,
> je n'arrive pas à télécharger l'extension open map layer pour
> l'utilisation des fonds de cartes. Aussi, tout récemment, j'ai
> installé sur mon PC l'antivirus Kaspersky 2015. Depuis lors, quand je
> lance le logiciel, il commence à charger et se bloque au niveau de
> l'installation de l'interface graphique. J’ai essayé de travailler
> avec QGIS 2.6.1, mais c'est le même souci. Quelqu’un saurai-t-il ce
> qui se passe? Merci.

Bonjour Abdoulaye,
please note that this mailing list is in English. You might find others
in French if you prefer.
Most probably your antivirus is blocking some parts of QGIS. Try to
deactivate it.
All the best.
-- 
Paolo Cavallini - www.faunalia.eu
QGIS & PostGIS courses: http://www.faunalia.eu/training.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Bonjour, 
Désactive l'antivirus avant d'installer QGIS. Si tu veux plus d'aide avec 
le open layer plugin, donne les code d'erreur svp (si il en a). 
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
www.archeotec.ca 
On Jul 19, 2015 13:36, "Abdoulaye Diallo [via OSGeo.org]   " 
 wrote: 

Bonjour à tous. J’utilise QGIS 2.8.1  et 2.0. Sur mon appareil
(Windows 8, 64 bits) et je rencontre quelques difficultés. En effet,
je n'arrive pas à télécharger l'extension open map layer pour
l'utilisation des fonds de cartes. Aussi, tout récemment, j'ai
installé sur mon PC l'antivirus Kaspersky 2015. Depuis lors, quand je
lance le logiciel, il commence à charger et se bloque au niveau de
l'installation de l'interface graphique. J’ai essayé de travailler
avec QGIS 2.6.1, mais c'est le même souci. Quelqu’un saurai-t-il ce
qui se passe? Merci.
Cordialement Abdoulaye,
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5216173.html 


To start a new topic under Quantum GIS - User, email 
ml-node+s1560n4125267h38@n6.nabble.com 
To unsubscribe from Quantum GIS - User, click here . 
NAML 




--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5216173p5216254.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Nicolas Cadieux]

Hi everyone, 
Many people here also speak french and other languages (and I have given him 
the same advice Pablo has but in french). The fact is that this is the very 
best list and the nature of the web is international. 
Indicating to people that this is an English list (i have seen this comment a 
few times now) is inflammatory in many countries... It is the equivalent of 
saying "English only, others not wanted..." I very well know that this was not 
anybody's intention.  Just be careful:).  
Nicolas Cadieux 
On Jul 20, 2015 06:53, "Paolo Cavallini [via OSGeo.org]" 
 wrote: 

Il 19/07/2015 19:41, Abdoulaye Diallo ha scritto:
> Bonjour à tous. J’utilise QGIS 2.8.1  et 2.0. Sur mon appareil
> (Windows 8, 64 bits) et je rencontre quelques difficultés. En effet,
> je n'arrive pas à télécharger l'extension open map layer pour
> l'utilisation des fonds de cartes. Aussi, tout récemment, j'ai
> installé sur mon PC l'antivirus Kaspersky 2015. Depuis lors, quand je
> lance le logiciel, il commence à charger et se bloque au niveau de
> l'installation de l'interface graphique. J’ai essayé de travailler
> avec QGIS 2.6.1, mais c'est le même souci. Quelqu’un saurai-t-il ce
> qui se passe? Merci.
Bonjour Abdoulaye,
please note that this mailing list is in English. You might find others
in French if you prefer.
Most probably your antivirus is blocking some parts of QGIS. Try to
deactivate it.
All the best.
-- 
Paolo Cavallini - www.faunalia.eu
QGIS & PostGIS courses: http://www.faunalia.eu/training.html 
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 

http://osgeo-org.1560.x6.nabble.com/no-subject-tp5216173p5216222.html 


To start a new topic under Quantum GIS - User, email 
ml-node+s1560n4125267h38@n6.nabble.com 
To unsubscribe from Quantum GIS - User, click here . 
NAML 




--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5216173p5216260.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Paolo Cavallini]

Il 15/09/2015 14:28, Abdoulaye Diallo ha scritto:
> hello group, excuse me someone knows, how to join or find the QGIS
> contributors email? i want to say, the people who made the différents
> extensions  or plugin of QGIS. thanks.

Hi,
for privacy reasons we do not make the addresses public. However, you
can try to contact them through the code repositories, mostly on github.
All the best.

-- 
Paolo Cavallini - www.faunalia.eu
QGIS & PostGIS courses: http://www.faunalia.eu/training.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Brent Wood]

Hi,
Don't save as a pdf - these do not generally work as georeferenced images & 
QGIS cannot create a geopdf.
The easy way is without using the print composer, just save the project as an 
image (Project menu) - the default is a georeferenced png (png + world file).
Avenza cannot read these, but QGIS can. Open the png image you just saved as a 
new raster layer in QGIS, & then save it as a Gtiff format image. This should 
create a geotiff of the map that you can read with Avenza.
Cheers,
Brent Wood




  From: Pony Express 
 To: qgis-user@lists.osgeo.org 
 Sent: Sunday, October 18, 2015 1:35 PM
 Subject: [Qgis-user] (no subject)
   

I am a new user to QGIS, and interested in making referenced pdf maps for 
Avenza App.  I find this app excellent out in the middle of no where as the GPS 
on my phone places me on the map.  I tend to be rather adventurous, and often 
can find images of maps for places I travel, but not with the geo referencing.  
I have tried to use QGIS and was able to make images with references, but when 
using print composer to save the pdf, Avenza says the map is not referenced.  :(

Obviously I am not doing something correctly, could some one give me a short 
tutorial or point me to a tutorial?

I have attached link of a map of interest.

http://www.fs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb5357542.pdf
-- 
Pony
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Goyo]

You can export a world file with georeferencing information along with
the composer. In the "Composition" tab, "Export settings", check
"World file on" and select the map (I guess there will be just one map
in your case).

I do not think this will work for pdfs but it will do for image
formats (pdf, tiff, jpeg...)

Hope it helps

Goyo


2015-10-18 2:35 GMT+02:00 Pony Express :
>
> I am a new user to QGIS, and interested in making referenced pdf maps for
> Avenza App.  I find this app excellent out in the middle of no where as the
> GPS on my phone places me on the map.  I tend to be rather adventurous, and
> often can find images of maps for places I travel, but not with the geo
> referencing.  I have tried to use QGIS and was able to make images with
> references, but when using print composer to save the pdf, Avenza says the
> map is not referenced.  :(
>
> Obviously I am not doing something correctly, could some one give me a short
> tutorial or point me to a tutorial?
>
> I have attached link of a map of interest.
>
> http://www.fs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb5357542.pdf
> --
> Pony
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Goyo]

Or if you really want geoPDF, it is explained here:

http://www.northrivergeographic.com/archives/migrating-a-project-from-arcgis-to-qgis-georeferenced-pdfs

Goyo

2015-10-18 15:33 GMT+02:00 Goyo :
> You can export a world file with georeferencing information along with
> the composer. In the "Composition" tab, "Export settings", check
> "World file on" and select the map (I guess there will be just one map
> in your case).
>
> I do not think this will work for pdfs but it will do for image
> formats (pdf, tiff, jpeg...)
>
> Hope it helps
>
> Goyo
>
>
> 2015-10-18 2:35 GMT+02:00 Pony Express :
>>
>> I am a new user to QGIS, and interested in making referenced pdf maps for
>> Avenza App.  I find this app excellent out in the middle of no where as the
>> GPS on my phone places me on the map.  I tend to be rather adventurous, and
>> often can find images of maps for places I travel, but not with the geo
>> referencing.  I have tried to use QGIS and was able to make images with
>> references, but when using print composer to save the pdf, Avenza says the
>> map is not referenced.  :(
>>
>> Obviously I am not doing something correctly, could some one give me a short
>> tutorial or point me to a tutorial?
>>
>> I have attached link of a map of interest.
>>
>> http://www.fs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb5357542.pdf
>> --
>> Pony
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Springfield Harrison]

Yes, same implementation in Manifold GIS. Very useful.

Cheers . . . . .   Spring
Samsung Tab 4
On Nov 13, 2015 5:19 AM, "Christian Röttger"  wrote:

> Dear all,
>
> does anyone know if there is a keyboard shortcut to temporarly stop
> snapping while digitizing? As Example, i want to digitize a polygon very
> close to another one. Then my vertex snaps to the point but i want to set
> it exactly beside the point. I know this feature from ArcGis where one can
> press Space to temporary deactivate snapping, set the point, release space
> and snap to the next points.
>
> Thanks Christian
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[ralfwessels]

Hi Springfield,

would be interesting to know what shortcut this is - for none Manifold GIS
users!

ralf



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5236193p5236237.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] (no subject)

[Springfield Harrison]

Hello Ralf,

For Manifold, it is also the space bar.  Once snapping is 
enabled it is then turned on/off with the space bar so it can be interrupted.


Cheers . . . . .



At 13-11-2015 09:14 Friday, ralfwessels wrote:
Hi Springfield, would be interesting to know what shortcut this is - 
for none Manifold GIS users! ralf -- View this message in context: 
http://osgeo-org.1560.x6.nabble.com/no-subject-tp5236193p5236237.html 
 Sent from the Quantum GIS - User mailing list archive at 
Nabble.com. ___ 
Qgis-user mailing list Qgis-user@lists.osgeo.org List info: 
http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: 
http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user