subject:"Re\: \[Qgis\-user\] Qfield"

Re: [Qgis-user] QField Scale settings

2024-05-21 Thread Adam Nielsen via QGIS-User

> at the moment I am using QGIS Desktop 3.22.9 und QField. After preparing
> and packaging my QGIS project for QField I regonized that the scale ist
> showing a very low number (Unit: mm).
> But I can not find the settings. Is it possible to change the scale? And
> how does it work?

You might be seeing the same issue I've been getting recently as well.
When you import a project into QField it's just excessively zoomed in.
You have to pinch-zoom with your fingers to zoom out a bunch of
times until you're at the right scale.

I guess someone should submit a bug report because it used to open
showing the same view you last saved in QGIS but now it's not only
zoomed in but also offset quite a ways from the QGIS view.

Cheers,
Adam.
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield on TDC600

2021-02-05 Thread Bo Victor Thomsen


Hi Ivan -

I've experienced similar problems with other GIS applications and 
platforms. In some of these cases, the problem was caused by the GPS 
delivering "to many" positions to the application. Instead of generating 
(perhaps) 1 fix/sec the GPS generated 10 fixes/sec and overwhelmed the 
input buffer in the application.


The visible symptoms is that the GPS position trails behind the actual 
position. If you stop walking, the the GPS position eventually catches 
up to the actual position.


You might try the slow the number of fixes/sec (if it's possible). This 
is just a guess. I have no experience at all with the Trimble TDC600 at 
all.


Med venlig hilsen / Kind regards

Bo Victor Thomsen

Den 04-02-2021 kl. 15:11 skrev Ivan Dananaj:


I would like to ask you for advice with a problem that occurred after 
installing the Qfield application (latest version, but also older 
versions) on the Trimble TDC600 (android 8). I prepared a project in 
QGIS (3.14.16).


The cursor on the screen does not move at the same time as I move, 
there is a delay of about 70 seconds. I'm also sending a picture where 
I've tried to illustrate the problem. After I arrived at a certain 
place, I immediately made a point in front of the entrance to the 
building. The cursor at that time was about 100 m from that place and 
the position of the point was also recorded there (showing accuracy 
below 1m). The cursor was still moving to my place. By the time I took 
the photo (using a widget for photos), the cursor moved to a place 
about halfway between where I was standing and where the point was 
recorded. The coordinates of the cursor at that time were assigned. 
But the photo (towards the entrance to the building) was taken from 
the place where I was standing.


Occasionally, the cursor reached the actual position and pointed 
accurately. But, if I wanted to add a new point, after saving, there 
was a delay again after adding it.


There was no such problem with other applications (LocusGIS, Google 
maps, TerraFlex). The problem also occurred in these applications when 
Qfield was turned on simultaneously.


I have good experience using the Qfield app on other devices (Trimble 
TDC100, android 5) or phones with higher versions of android.


Can you help me how to solve this problem?

Thank you.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: adding photos, but how?

2020-04-20 Thread Ville Koivisto

Hi Bernd,

I haven't followed instructions in that link of yours precisely since I've 
never had the need to capture several images for a same feature. 

But I can guarantee that this functionality works and works great (at least for 
me). 

Have you tried without setting up relations, just having one field that's going 
store captured image path and then configuring it as a "attachment" in layer 
properties in QGIS? The correct place to do that is in attribute form. Skip to 
the last part of the instructions found in your link. 

Images will be saved to your mobile device, into a new folder (DCIM) that will 
be located under your project folder. That's at least the default behavior.

Hope this help.

Br,

Ville Koivisto
Head of GIS
Suomen kuntotekniikka Oy


-Original Message-
From: Qgis-user  On Behalf Of Bernd 
Vogelgesang
Sent: Monday, April 20, 2020 10:50 PM
To: qgis-user 
Subject: [Qgis-user] QField: adding photos, but how?

Hi,
for a long time I wish to use QField .. in the field, but as I do not manage to 
set up a reliably working configuration, I still have to use Locus all the time 
when I need to take notes in the field.

As the ability to take linked photos is crucial for me, I gave it another try 
and tried to follow the instructions on the website.
https://qfield.org/docs/project-management/add-1-n-pictures.html

Can anyone confirm that it is possible to take linked pictures following these 
docs? I have the feeling that there are missing some important steps or 
settings or other infos.

Tried now for 2 days and will soon give up again for the next 2 years.

I think it would be much easier if there would be a tiny downloadable example 
project , so I could cross-check the settings and configurations.

Anyway, grateful for any kind of input,
Bernd
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: adding photos, but how?

2020-04-20 Thread Bernd Vogelgesang


Hi Carlos;

Am 20.04.20 um 22:46 schrieb Carlos Dávila:

Hi Bernd
If you don't need an unlimited number of pictures for each feature, as
in the example from QField website, I think you can forget about
relations and just add a field of type string for the number of
pictures you need, then select "attachment" widget type and image as
"Integrated document viewer". That way you'll have two buttons in your
form in your mobile device, one which opens your camera to take a
picture and other to select an already saved picture from your device
file system.
That's the theory, but I'm having problems to save pictures taken from
within QField. Camera is opened and picture is taken, but when I
return to QField, picture is not saved. It seems as if some "Accept"
of "Confirm" action is missing. As a workaround, I take the picture
with the camera app before adding the new feature. Then I go to
QField, add a new feature and select that picture using the second
button mentioned above. The only drawback of this system is that I
then have two identical files for each picture, one in the camera
directory and a copy of that in QField project directory.


well, if I have the chance to take multiple pictures, I would not like
to miss it.
But as I asked, would it be possible to set up sth like it is advertised
using the instructions here?
https://qfield.org/docs/project-management/add-1-n-pictures.html ?

I really would like to get it running AND make suggestions how to
improve the documentation. But as long as I do not know what is missing,
I can't propose any changes (aka vicious circle).

As there are nearly no traces to be found that QField is used this way
on the web (stackexchange, youtube, vimeo), I have the feeling that
people simply are not able to set it up with this documentation cause
vital parts are missing or not explained enough.

The next question then would be, if it really works as described, or if
there are other bugs.

But as long as none steps up to solve the first issues, we will not get
far with the others.

Cheers,

Bernd




El 20/4/20 a las 21:49, Bernd Vogelgesang escribió:

Hi,
for a long time I wish to use QField .. in the field, but as I do not
manage to set up a reliably working configuration, I still have to use
Locus all the time when I need to take notes in the field.

As the ability to take linked photos is crucial for me, I gave it
another try and tried to follow the instructions on the website.
https://qfield.org/docs/project-management/add-1-n-pictures.html

Can anyone confirm that it is possible to take linked pictures following
these docs? I have the feeling that there are missing some important
steps or settings or other infos.

Tried now for 2 days and will soon give up again for the next 2 years.

I think it would be much easier if there would be a tiny downloadable
example project , so I could cross-check the settings and
configurations.

Anyway, grateful for any kind of input,
Bernd
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield failed

2020-03-25 Thread ctermppservicesig

Thanks dearWhat is your private mail?Envoyé depuis mon appareil mobile 
Samsung. Message d'origine De : Matthias Kuhn 
 Date : 25/03/2020  2:09 PM  (GMT-05:00) À : 
ctermppservicesig , qgis-user@lists.osgeo.org 
Objet : Re: RE : Re: [Qgis-user] qfield failed 
Yes, I do.
Can you send me a mail in private (this list is in English).
Thanks

Matthias

On 3/25/20 7:04 PM, ctermppservicesig
  wrote:


  
  I can't work correctly.
  Sorry, do You speak french?
  
  
  
  
  
  
  
Envoyé
  depuis mon appareil mobile Samsung.
  
  
 Message d'origine 
De : Matthias Kuhn  
Date : 25/03/2020 1:22 PM (GMT-05:00) 
À : ServiceSIG CTERMPP_DINEPA
  , qgis-user@lists.osgeo.org

Objet : Re: [Qgis-user] qfield failed 


  
  Hi,
  Sorry to hear.
  
  What exactly do you mean with the project failed? Is there an
error message you can share?
  Best regards
  Matthias
  
  On 3/25/20 5:22 PM, ServiceSIG
CTERMPP_DINEPA wrote:
  
  

hi dear, 
  i prepared a projet Qgis to collect some informations with
  qfield, i don't know what's matter, each time the project
  failed, how can i resolve this problem please?



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
  

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield failed

2020-03-25 Thread ctermppservicesig

I would like to collect many home living a street, i prepared my project to 
qgis 3.12, when I copied the file on my tablet, each time I zoom in the qfield 
app stop working. Envoyé depuis mon appareil mobile Samsung. Message 
d'origine De : Matthias Kuhn  Date : 25/03/2020  
1:22 PM  (GMT-05:00) À : ServiceSIG CTERMPP_DINEPA 
, qgis-user@lists.osgeo.org Objet : Re: 
[Qgis-user] qfield failed 
Hi,
Sorry to hear.

What exactly do you mean with the project failed? Is there an
  error message you can share?
Best regards
Matthias

On 3/25/20 5:22 PM, ServiceSIG
  CTERMPP_DINEPA wrote:


  
  hi dear, 
i prepared a projet Qgis to collect some informations with
qfield, i don't know what's matter, each time the project
failed, how can i resolve this problem please?
  
  
  
  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield failed

2020-03-25 Thread Matthias Kuhn


Yes, I do.

Can you send me a mail in private (this list is in English).

Thanks

Matthias

On 3/25/20 7:04 PM, ctermppservicesig wrote:

I can't work correctly.
Sorry, do You speak french?



Envoyé depuis mon appareil mobile Samsung.
 Message d'origine 
De : Matthias Kuhn 
Date : 25/03/2020 1:22 PM (GMT-05:00)
À : ServiceSIG CTERMPP_DINEPA , 
qgis-user@lists.osgeo.org

Objet : Re: [Qgis-user] qfield failed

Hi,

Sorry to hear.

What exactly do you mean with the project failed? Is there an error 
message you can share?


Best regards

Matthias

On 3/25/20 5:22 PM, ServiceSIG CTERMPP_DINEPA wrote:

hi dear,
i prepared a projet Qgis to collect some informations with qfield, i 
don't know what's matter, each time the project failed, how can i 
resolve this problem please?


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield failed

2020-03-25 Thread Matthias Kuhn


Hi,

Sorry to hear.

What exactly do you mean with the project failed? Is there an error 
message you can share?


Best regards

Matthias

On 3/25/20 5:22 PM, ServiceSIG CTERMPP_DINEPA wrote:

hi dear,
i prepared a projet Qgis to collect some informations with qfield, i 
don't know what's matter, each time the project failed, how can i 
resolve this problem please?


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField question

2020-02-26 Thread Matthias Kuhn


Hi Cinda,

Adding data is supported as well and works in many projects.

Good choice to look into the log, can you explain how you did that and 
share a screenshot of that?


And maybe also share the data?

Best wishes

Matthias

On 2/27/20 12:11 AM, Cinda Graubard wrote:


To clarify- I can add new data on the tablet, and it shows up after 
exiting and restarting. The synchronizing process however doesn’t pick 
the additions up apparently.


And when I try to view the Log file all I see is an empty gray screen.

…

Cinda Graubard

*/GeoMax/*

303.440.4539 office

720.272.9812 mobile

*/GIS for Mineral Exploration/*

2D and 3D Visualization, Integration, Analysis, Modeling

Project and Data Management

Data capture and conversion

Databases

Software Sales and Training

earthtiny

*From:* Qgis-user  *On Behalf Of 
*Cinda Graubard

*Sent:* Wednesday, February 26, 2020 4:00 PM
*To:* qgis-user@lists.osgeo.org
*Subject:* [Qgis-user] QField question

I seem to be able to edit offline objects (for example, move a point 
object or edit it’s attributes), and synching back to the QGIS project 
works and shows the edits.


However, adding new data does not seem to work. Any ideas?

Thanks,

Cinda

…

Cinda Graubard

*/GeoMax/*

303.440.4539 office

720.272.9812 mobile

*/GIS for Mineral Exploration/*

2D and 3D Visualization, Integration, Analysis, Modeling

Project and Data Management

Data capture and conversion

Databases

Software Sales and Training

earthtiny


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField question

2020-02-26 Thread Cinda Graubard

To clarify- I can add new data on the tablet, and it shows up after exiting
and restarting. The synchronizing process however doesn't pick the additions
up apparently.

And when I try to view the Log file all I see is an empty gray screen.

 

.

Cinda Graubard

GeoMax

303.440.4539 office

720.272.9812 mobile

 

GIS for Mineral Exploration

2D and 3D Visualization, Integration, Analysis, Modeling

Project and Data Management

Data capture and conversion

Databases

Software Sales and Training 

 



 

From: Qgis-user  On Behalf Of Cinda
Graubard
Sent: Wednesday, February 26, 2020 4:00 PM
To: qgis-user@lists.osgeo.org
Subject: [Qgis-user] QField question

 

I seem to be able to edit offline objects (for example, move a point object
or edit it's attributes), and synching back to the QGIS project works and
shows the edits.

However, adding new data does not seem to work. Any ideas?

 

Thanks,

Cinda

 

.

Cinda Graubard

GeoMax

303.440.4539 office

720.272.9812 mobile

 

GIS for Mineral Exploration

2D and 3D Visualization, Integration, Analysis, Modeling

Project and Data Management

Data capture and conversion

Databases

Software Sales and Training 

 



 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField crowdfunding

2019-10-15 Thread Matthias Kuhn


Thanks for the heads up Bernd.

We really totally forgot to announce the crowdfunding on this list, an 
inexcusable mistake indeed.


In order to give everyone a fair chance to contribute ;) the 
crowdfunding period was extended to end of next week, October 25.


https://www.opengis.ch/projects/qfield-love/

Best regards

Matthias in the name of the OPENGIS.ch team.


On 10/14/19 7:55 PM, Bernd Vogelgesang wrote:

After not using QField for a while, I was completely surprised to find
out that there is a crowdfunding initiative running till 16.10.19.

I now searched the mailing list entries and could not find a trace of an
annoucement. How can this be?

So, for those interested in donating, the link:

https://www.opengis.ch/projects/qfield-love/

Cheers,
Bernd


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: recommendations for aerial basemap preparation?

2019-03-25 Thread Bernd Vogelgesang


Hi Wouter,

unfortuantely, the area is located in Germany, well-known for its
horrible mobile networks coverages. There are some spots where you even
can't make SOS-calls.

So for the years to come WMS, is a bad to no option. But I'll give it a try.

Cheers,

Bernd

Am 25.03.19 um 09:44 schrieb Wouter Impens:

Hi Bernd,

It's possible to load a WMS layer in your project for Q-field, maybe
that's a solution?
But then of course you need an internet connection all the time...

Greetings
Wouter

Op zo 24 mrt. 2019 om 21:37 schreef Bernd Vogelgesang
mailto:bernd.vogelges...@gmx.de>>:

Hi,

I need an aerial basemap for my QField-project to be able to locate
positions. As QField has not the ability to navigate to a point or
indicate the direction of movement, provided only with a topographic
basemap, I'm stumbling through the forest and have a hard time finding
the positions.

The project area is huge, around 400 square kilometers! I have a Mrsid
file of the area of 1.6 GB with 20 centimeter resolution,
transformed with gdal_translate to tiff is 42.5 GB,
compressed with gdal_transform with jped-compression 50% 968 MB,
resampled to 40cm resolution and 50% jpeg has 295 MB

I used the QField sync plugin to generate a baselayer in gpgk-format
from this ,which has 540 MB with 40 cm resolution.

Unfortunately, on the tablet, the baselayer is loading so slow,
that it
is impossible to work with it. Each redraw takes around 10 seconds in
the small scale, rising to infinity in higher scales.

I wonder if there are other approaches recommendable, for example
splitting the image into separate layers for bigger regions, which I
could then turn on and off, or if I should prepare the image apart
from
using the plugins converter to gpkg.

Due to the enourmous amount of time needed to process the image on the
PC, a trial-and-error approach seems not to be feasable, so I ask
you if
someone can recommend an approach for such a huge beast.


Thanx in advance,

Bernd

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org 
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: recommendations for aerial basemap preparation?

2019-03-25 Thread Wouter Impens

Hi Bernd,

It's possible to load a WMS layer in your project for Q-field, maybe that's
a solution?
But then of course you need an internet connection all the time...

Greetings
Wouter

Op zo 24 mrt. 2019 om 21:37 schreef Bernd Vogelgesang <
bernd.vogelges...@gmx.de>:

> Hi,
>
> I need an aerial basemap for my QField-project to be able to locate
> positions. As QField has not the ability to navigate to a point or
> indicate the direction of movement, provided only with a topographic
> basemap, I'm stumbling through the forest and have a hard time finding
> the positions.
>
> The project area is huge, around 400 square kilometers! I have a Mrsid
> file of the area of 1.6 GB with 20 centimeter resolution,
> transformed with gdal_translate to tiff is 42.5 GB,
> compressed with gdal_transform with jped-compression 50% 968 MB,
> resampled to 40cm resolution and 50% jpeg has 295 MB
>
> I used the QField sync plugin to generate a baselayer in gpgk-format
> from this ,which has 540 MB with 40 cm resolution.
>
> Unfortunately, on the tablet, the baselayer is loading so slow, that it
> is impossible to work with it. Each redraw takes around 10 seconds in
> the small scale, rising to infinity in higher scales.
>
> I wonder if there are other approaches recommendable, for example
> splitting the image into separate layers for bigger regions, which I
> could then turn on and off, or if I should prepare the image apart from
> using the plugins converter to gpkg.
>
> Due to the enourmous amount of time needed to process the image on the
> PC, a trial-and-error approach seems not to be feasable, so I ask you if
> someone can recommend an approach for such a huge beast.
>
>
> Thanx in advance,
>
> Bernd
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: recommendations for aerial basemap preparation?

2019-03-25 Thread Matthias Kuhn

Hi,

There is a gis stackexchange question open regarding this which has some
good inputs to consider.

https://gis.stackexchange.com/questions/309379/choosing-raster-format-for-qfield

There is also some information in the QField documentation regarding
this topic (although that could benefit from some improvements from your
findings, there's an edit on github link at the bottom of the page ;) )

https://www.qfield.org/docs/project-management/dataformat.html#raster-data

Best regards

Matthias

On 3/24/19 9:37 PM, Bernd Vogelgesang wrote:
> Hi,
>
> I need an aerial basemap for my QField-project to be able to locate
> positions. As QField has not the ability to navigate to a point or
> indicate the direction of movement, provided only with a topographic
> basemap, I'm stumbling through the forest and have a hard time finding
> the positions.
>
> The project area is huge, around 400 square kilometers! I have a Mrsid
> file of the area of 1.6 GB with 20 centimeter resolution,
> transformed with gdal_translate to tiff is 42.5 GB,
> compressed with gdal_transform with jped-compression 50% 968 MB,
> resampled to 40cm resolution and 50% jpeg has 295 MB
>
> I used the QField sync plugin to generate a baselayer in gpgk-format
> from this ,which has 540 MB with 40 cm resolution.
>
> Unfortunately, on the tablet, the baselayer is loading so slow, that it
> is impossible to work with it. Each redraw takes around 10 seconds in
> the small scale, rising to infinity in higher scales.
>
> I wonder if there are other approaches recommendable, for example
> splitting the image into separate layers for bigger regions, which I
> could then turn on and off, or if I should prepare the image apart from
> using the plugins converter to gpkg.
>
> Due to the enourmous amount of time needed to process the image on the
> PC, a trial-and-error approach seems not to be feasable, so I ask you if
> someone can recommend an approach for such a huge beast.
>
>
> Thanx in advance,
>
> Bernd
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
-- 
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: possible to add entry from relation?

2019-03-19 Thread Bernd Vogelgesang


Hi Matthias,

actually I am already quite happy about what I managed to set up.

Found my final set-up at 3 a.m.. Especially the transferability of 
styling of the layers (scale dependencies of labels, visibility etc) is 
really great, but act a bit different than on the PC. Basemap rendering 
is a bit slow..


I will have to enter the ID manually for now, which will definitely 
produce some errors, but it is a first test.


So, now I'm on my way to my first QField-test in the field :) I will 
definitely test more things and report back!


Thanks for all your efforts,

Bernd

Am 19.03.19 um 08:01 schrieb Matthias Kuhn:


Hi Bernd,

Welcome on board!

It's not yet available but under heavy development in our R labs. 
There are a couple of early development screenshots available at 
https://github.com/opengisch/QField/pull/502 and even a alpha test 
app, but it will still require some work before it's ready for prime time.


So for now, you will have to work with a plan B, but if you can wait a 
month or two, you will be able to directly add your inspections via 
nested forms.


Btw, there is a "fix me" link at the bottom of each page in the docs, 
if you happen to find something that needs improvement, we'll be very 
happy to have it fixed!


Best regards

Matthias

On 3/18/19 7:18 PM, Bernd Vogelgesang wrote:

Hi,

I'm going to try QField in the field for the first time, and, like 
always, I want to make it complicated ;)


I have a point layer with over 500 nestingboxes in a huge area, and 
we are going to inspect and clean them.


I created a Geopackage with this layer and also a non-spatial table 
where I would like to enter the results/actions which were taken on 
the boxes (value maps etc) and created a relation between those two 
layers via the box id.


In QGIS itself, I can easily add a new entry in the non-spatial table 
via the form for the point layer.


The same does not seem to work in QField, there I just see the 
attributes of the point layer and thats it.


Is there a way to use relations in QField? It's not mentioned in the 
docs (https://www.qfield.org/docs/index.html) that it is not 
possible, but actually threre is not a lot mentioned anyway ;)



Any ideas?

Cheers,

Bernd


QGIS 3.6 on Linux Mint

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField: possible to add entry from relation?

2019-03-19 Thread Matthias Kuhn

Hi Bernd,

Welcome on board!

It's not yet available but under heavy development in our R labs.
There are a couple of early development screenshots available at
https://github.com/opengisch/QField/pull/502 and even a alpha test app,
but it will still require some work before it's ready for prime time.

So for now, you will have to work with a plan B, but if you can wait a
month or two, you will be able to directly add your inspections via
nested forms.

Btw, there is a "fix me" link at the bottom of each page in the docs, if
you happen to find something that needs improvement, we'll be very happy
to have it fixed!

Best regards

Matthias

On 3/18/19 7:18 PM, Bernd Vogelgesang wrote:
> Hi,
>
> I'm going to try QField in the field for the first time, and, like
> always, I want to make it complicated ;)
>
> I have a point layer with over 500 nestingboxes in a huge area, and we
> are going to inspect and clean them.
>
> I created a Geopackage with this layer and also a non-spatial table
> where I would like to enter the results/actions which were taken on
> the boxes (value maps etc) and created a relation between those two
> layers via the box id.
>
> In QGIS itself, I can easily add a new entry in the non-spatial table
> via the form for the point layer.
>
> The same does not seem to work in QField, there I just see the
> attributes of the point layer and thats it.
>
> Is there a way to use relations in QField? It's not mentioned in the
> docs (https://www.qfield.org/docs/index.html) that it is not possible,
> but actually threre is not a lot mentioned anyway ;)
>
>
> Any ideas?
>
> Cheers,
>
> Bernd
>
>
> QGIS 3.6 on Linux Mint
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
-- 
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield - basic docs

2019-01-08 Thread Matthias Kuhn

Hi Franco,

http://www.qfield.org/docs is the point of reference. What information
are you missing there and what questions do you have?

If we know what's missing it will be easier to come up with additional
material in the future.

Best regards

Matthias

On 1/8/19 2:36 PM, Franco Cazzola wrote:
>
> Hi
>
> I downloaded and tried out the new QField release but I need a user
> manual to try it out.
>
>  
>
> In addition to the documentation available on
> http://www.qfield.org/docs/   is there a
> basic introduction docs to Qfield application ?
>
> Regards,
>
>  
>
> Franco Cazzola
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
-- 
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField Search Question

2019-01-08 Thread Tyler Veinot

Matthias;
That's what I was looking for!
Tyler

On Tue, Jan 8, 2019 at 8:33 AM Matthias Kuhn  wrote:

> Hi Tyler,
>
> This can be configured in the display expression, for more details, see
> the QField documentation
> https://www.qfield.org/docs/project-management/configure-search.html?highlight=search
>
> Best regards
>
> Matthias
> On 1/8/19 1:32 PM, Tyler Veinot wrote:
>
> Hi;
> Just downloaded and tried out the new QField release and had a question
> about the search function. Does it search in certain fields based on field
> name or is there some way to indicate which fields in which layers to
> search?
> Great App BTW, the search function is a nice addition.
> Tyler
>
> ___
> Qgis-user mailing listqgis-u...@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
> --
> Matthias Kuhn
> matth...@opengis.ch
> +41 (0)76 435 67 63 <+41764356763>
> [image: OPENGIS.ch Logo] 
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField Search Question

2019-01-08 Thread Matthias Kuhn

Hi Tyler,

This can be configured in the display expression, for more details, see
the QField documentation
https://www.qfield.org/docs/project-management/configure-search.html?highlight=search

Best regards

Matthias

On 1/8/19 1:32 PM, Tyler Veinot wrote:
> Hi;
> Just downloaded and tried out the new QField release and had a
> question about the search function. Does it search in certain fields
> based on field name or is there some way to indicate which fields in
> which layers to search?
> Great App BTW, the search function is a nice addition.
> Tyler
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
-- 
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield: adding new columns to a postgis table

2018-07-05 Thread Ville Koivisto

To answer my own question: rebooting the app and project was needed. 

 

Best regards,

 

Ville Koivisto

+35840 701 4283

GIS Expert

Suomen kuntotekniikka Oy



 

From: Ville Koivisto  
Sent: Thursday, July 5, 2018 8:49 AM
To: 'Qgis-user@lists.osgeo.org' 
Subject: Qfield: adding new columns to a postgis table

 

Good morning to all, 

 

I've created a Qfield project for my colleague, who's in the field updating
a dataset as we speak. Edited layers are postgis tables that I've been able
to edit successfully from my office's PC so far. 

 

But today I hoped to create new columns for a couple of my postgis tables.
This was successful for myself, but for my colleague in the field with
Qfield, changes didn't occur. Now I'm wondering if this is something I could
fix or if Qfield isn't coded to display columns which were added after the
initial packaging. 

 

Any idea anyone? 

 

Cheers,

 

Ville Koivisto

+35840 701 4283

GIS Expert

Suomen kuntotekniikka Oy



 

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField variables

2018-06-27 Thread Matthias Kuhn

Hi Juliette,

1) In the settings there is an option "Use native camera", can you try
disabling this one? The native functionality is unstable on some platforms

2) Define a default value for a field with the content
@position_horizontal_accuracy

   I just added some more docs here,
https://www.qfield.org/docs/project-management/vector-layers.html#additional-variables,
additional contributions to clarify even more are very welcome!

Best regards

Matthias


On 06/27/2018 09:23 AM, Juliette Ortet wrote:
> Dear all,
>
> I'm trying to use QField on my phone (Huawei P10) and I face two
> problems :
>
> 1) When I try to add a picture as an attibute, the app closes.
> 2) I don't know which is the proper syntax to get the QField variables
> values such as position_coordinate and position_horizontal_accuracy.
>
> How could I solve this ?
>
> Best regards,
>
> Juliette
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

-- 
Matthias Kuhn
matth...@opengis.ch 
+41 (0)76 435 67 63 
OPENGIS.ch Logo 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField doesn't see my data

2017-09-21 Thread Janneke van Dijk


Dear Edrouin,

I just had the same issue, trying to get qfield to work. I used the 
QFieldSync plugin and copied the whole project folder in 
Android\data\ch.opengis.qfield\files (on the SDcard - though it's 
formatted as internal SD card) and it would not show the folder. I then 
copied the whole folder to the root of the SD card, where I could find 
it under /mnt/sdcard and it opened.


Hope that helps for you too,
Janneke


On 18-Sep-17 23:30, edrou...@gmail.com wrote:

Did you find any solution, I have the same problem.



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField doesn't see my data

2017-09-18 Thread edrou...@gmail.com

Did you find any solution, I have the same problem.



--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField Question

2017-06-27 Thread Matthias Kuhn

Hi Tyler,

Yes, that would be a very interesting feature. In the latest release of
QField last week, support for directly connecting the GPS to the add
vertex tool was added (before it was always two clicks: 1. center to
GPS, 2. digitize). This new feature is the ground work for the feature
which you are asking for. What's missing now is the ability to
repeatedly trigger the add vertex tool (in intervals), the required
development is some frontend work. If you have the possibility to
sponsor this feature, please let us know!

Best regards

Matthias

On 6/27/17 12:57 PM, Tyler Veinot wrote:
> Hello;
> I would like to map some of the trails around my new home and was
> wondering if there was a way to have QField auto place a point every
> some many seconds based on my location as I walk or bike the trail. Or
> will it digitize a line based on my location as I go?
> Thanks;
> Tyler
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield docs

2016-09-28 Thread Steve . Toutant

Doesn't work at home, but work on my smaprtphone and at the office.
So the site is UP but not reachable fore some reasons.
I will tell my ISP





boesiii <boes...@yahoo.com>@lists.osgeo.org 
Envoyé par : "Qgis-user" <qgis-user-boun...@lists.osgeo.org>
2016-09-28 13:04

A
qgis-user@lists.osgeo.org
cc

Objet
Re: [Qgis-user] qfield docs








It is down for me.  I am in the US.



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/qfield-docs-tp5288012p5288249.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield docs

2016-09-28 Thread boesiii

It is down for me.  I am in the US.



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/qfield-docs-tp5288012p5288249.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-27 Thread Reginald Carlier

Thanks Fabrice,

I will certainly try mbtiles.

Regards,

Van: F T [mailto:ouk...@gmail.com]
Verzonden: vrijdag 23 september 2016 11:20
Aan: Reginald Carlier
Onderwerp: Re: [Qgis-user] QField

Hello
I'm also disapointed with gptk raster : too slow, not easy to prepare
For QField, we rather use .mbtiles format, created from QGis and the QTiles 
extension.
All formats that QGis uses can be converted in .mbtiles, it's very very easy to 
prepare.
QField uses .mbtiles raster very well, it's fast to display
Tested with a 4Go .mbtiles
Fabrice

2016-09-22 9:32 GMT+02:00 Reginald Carlier 
<reginald.carl...@ingelmunster.be<mailto:reginald.carl...@ingelmunster.be>>:
Thanks Andreas,

Creating a Geotiff with pyramids did the trick. The only disadvantage is that 
it created a file of about 1.7 GB (the original was 90 MB).
Now I am ready to test the app ☺.

Regards,

Van: Neumann, Andreas [mailto:a.neum...@carto.net<mailto:a.neum...@carto.net>]
Verzonden: woensdag 21 september 2016 16:19
Aan: Reginald Carlier
Onderwerp: Re: [Qgis-user] QField


Hi Reginald,

Did you create pyramids in the gpkg rasters?

Generally, Geotiff should be well supported - definitely more tested than gpkg 
rasters. I had a 1GB geotiff on qfield (on SD-Card) and it displays fast. I 
haven't tested vrt files with geotiffs - if it works as well?

Andreas

On 2016-09-21 15:44, Reginald Carlier wrote:
Hi Erwan,

You can look in the list of last week where I posted a couple of questions 
about qfield and was pointed to the right website for documentation.
I succeeded to publish a map on my phone but the aereal photo which was 
published as a gpkg file doesn’t render. When I use the raster.gpkg on my 
desktop it renders but very slow.
The gpkg file was created from a 90 MB jp2 file.

Regards,



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user




___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield docs

2016-09-27 Thread Matthias Kuhn

Hi Steve,

http://qfield.org works for me.

I don't really know what could be wrong there.

$ dig qfield.org @8.8.8.8

; <<>> DiG 9.10.4-P2-RedHat-9.10.4-1.P2.fc24 <<>> qfield.org @8.8.8.8
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38738
;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;qfield.org.IN  A

;; ANSWER SECTION:
qfield.org. 14399   IN  A   192.30.252.154
qfield.org. 14399   IN  A   192.30.252.153

;; Query time: 194 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Tue Sep 27 17:26:43 CEST 2016
;; MSG SIZE  rcvd: 71

On 09/27/2016 02:14 PM, steve.tout...@inspq.qc.ca wrote:
> Is qfield.org down?
> Address not resolved...dns problem?
> 
> I cannot access for a week (since I know it exists)
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] qfield docs

2016-09-27 Thread DelazJ

Hi,
The link provided in your message works here!

Harrissou

2016-09-27 14:14 GMT+02:00 :

> Is qfield.org down?
> Address not resolved...dns problem?
>
> I cannot access for a week (since I know it exists)
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-23 Thread F T

Hello

I'm also disapointed with gptk raster : too slow, not easy to prepare

For QField, we rather use .mbtiles format, created from QGis and the QTiles
extension.
All formats that QGis uses can be converted in .mbtiles, it's very very
easy to prepare.

QField uses .mbtiles raster very well, it's fast to display
Tested with a 4Go .mbtiles

Fabrice

2016-09-23 11:20 GMT+02:00 F T <ouk...@gmail.com>:

> Hello
>
> I'm also disapointed with gptk raster : too slow, not easy to prepare
>
> For QField, we rather use .mbtiles format, created from QGis and the
> QTiles extension.
> All formats that QGis uses can be converted in .mbtiles, it's very very
> easy to prepare.
>
> QField uses .mbtiles raster very well, it's fast to display
> Tested with a 4Go .mbtiles
>
> Fabrice
>
> 2016-09-22 9:32 GMT+02:00 Reginald Carlier <Reginald.Carlier@
> ingelmunster.be>:
>
>> Thanks Andreas,
>>
>>
>>
>> Creating a Geotiff with pyramids did the trick. The only disadvantage is
>> that it created a file of about 1.7 GB (the original was 90 MB).
>>
>> Now I am ready to test the app J.
>>
>>
>>
>> Regards,
>>
>>
>>
>> *Van:* Neumann, Andreas [mailto:a.neum...@carto.net]
>> *Verzonden:* woensdag 21 september 2016 16:19
>> *Aan:* Reginald Carlier
>> *Onderwerp:* Re: [Qgis-user] QField
>>
>>
>>
>> Hi Reginald,
>>
>> Did you create pyramids in the gpkg rasters?
>>
>> Generally, Geotiff should be well supported - definitely more tested than
>> gpkg rasters. I had a 1GB geotiff on qfield (on SD-Card) and it displays
>> fast. I haven't tested vrt files with geotiffs - if it works as well?
>>
>> Andreas
>>
>> On 2016-09-21 15:44, Reginald Carlier wrote:
>>
>> Hi Erwan,
>>
>>
>>
>> You can look in the list of last week where I posted a couple of
>> questions about qfield and was pointed to the right website for
>> documentation.
>>
>> I succeeded to publish a map on my phone but the aereal photo which was
>> published as a gpkg file doesn’t render. When I use the raster.gpkg on my
>> desktop it renders but very slow.
>>
>> The gpkg file was created from a 90 MB jp2 file.
>>
>>
>>
>> Regards,
>>
>>
>>
>>
>>
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>>
>>
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-22 Thread Matthias Kuhn

Hi Andreas,

It's all on the page in the QField docs on the link in my last mail :)

Matthias

On 09/22/2016 10:06 AM, Neumann, Andreas wrote:
> Hi Matthias,
> 
> Oh - thanks for the hint. So probably Reginald is just missing the
> pyramids in the geopackage - to be created, f.e. with gdaladdo.
> 
> Andreas
> 
> On 2016-09-22 09:56, Matthias Kuhn wrote:
> 
>> QField does not (yet) support tiff with jpeg compression.
>>
>> See:
>> http://www.qfield.org/docs/project-management/dataformat.html#raster-data
>>
>> GeoPackage worked quite nice in our experience and can also be built
>> in different resolutions (same page further down).
>>
>> Matthias
>>
>>
>> On 09/22/2016 09:37 AM, Neumann, Andreas wrote:
>>> Hi Reginald,
>>>
>>> You can use the JPEG compression inside Geotiff. Note that this can be
>>> specified separately for both the full resolution and the pyramids. You
>>> can also select the compression factor to decrease the file size in
>>> trade off with quality.
>>>
>>> See
>>> also http://www.gdal.org/frmt_gtiff.html and
>>> http://www.gdal.org/gdaladdo.html for
>>> details.
>>>
>>> I believe that modern QGIS versions have these options exposed in the
>>> GUI, but probably not as default.
>>>
>>> So maybe there is room for potential to get a smaller size Geotiff.
>>>
>>> Greetings,
>>> Andreas
>>>
>>> On 2016-09-22 09:32, Reginald Carlier wrote:
>>>
>>>> Thanks Andreas,
>>>>
>>>>  
>>>>
>>>> Creating a Geotiff with pyramids did the trick. The only disadvantage
>>>> is that it created a file of about 1.7 GB (the original was 90 MB).
>>>>
>>>> Now I am ready to test the app J.
>>>>
>>>>  
>>>>
>>>> Regards,
>>>>
>>>>  
>>>>
>>>> *Van:*Neumann, Andreas [mailto:a.neum...@carto.net
>>>> <mailto:a.neum...@carto.net>]
>>>> *Verzonden:* woensdag 21 september 2016 16:19
>>>> *Aan:* Reginald Carlier
>>>> *Onderwerp:* Re: [Qgis-user] QField
>>>>
>>>>  
>>>>
>>>> Hi Reginald,
>>>>
>>>> Did you create pyramids in the gpkg rasters?
>>>>
>>>> Generally, Geotiff should be well supported - definitely more tested
>>>> than gpkg rasters. I had a 1GB geotiff on qfield (on SD-Card) and it
>>>> displays fast. I haven't tested vrt files with geotiffs - if it works
>>>> as well?
>>>>
>>>> Andreas
>>>>
>>>> On 2016-09-21 15:44, Reginald Carlier wrote:
>>>>
>>>> Hi Erwan,
>>>>
>>>>  
>>>>
>>>> You can look in the list of last week where I posted a couple of
>>>> questions about qfield and was pointed to the right website for
>>>> documentation.
>>>>
>>>> I succeeded to publish a map on my phone but the aereal photo
>>>> which was published as a gpkg file doesn't render. When I use the
>>>> raster.gpkg on my desktop it renders but very slow.
>>>>
>>>> The gpkg file was created from a 90 MB jp2 file.
>>>>
>>>>  
>>>>
>>>> Regards,
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>> ___
>>>> Qgis-user mailing list
>>>> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>>>> <mailto:Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>>
>>>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>>>
>>>>  
>>>>
>>>>  
>>>>
>>>  
>>>
>>>  
>>>
>>>
>>> ___
>>> Qgis-user mailing list
>>> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>>
>  
> 
>  
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-22 Thread Neumann, Andreas

Hi Matthias, 

Oh - thanks for the hint. So probably Reginald is just missing the
pyramids in the geopackage - to be created, f.e. with gdaladdo. 

Andreas 

On 2016-09-22 09:56, Matthias Kuhn wrote:

> QField does not (yet) support tiff with jpeg compression.
> 
> See:
> http://www.qfield.org/docs/project-management/dataformat.html#raster-data
> 
> GeoPackage worked quite nice in our experience and can also be built in 
> different resolutions (same page further down).
> 
> Matthias
> 
> On 09/22/2016 09:37 AM, Neumann, Andreas wrote: Hi Reginald,
> 
> You can use the JPEG compression inside Geotiff. Note that this can be
> specified separately for both the full resolution and the pyramids. You
> can also select the compression factor to decrease the file size in
> trade off with quality.
> 
> See
> also http://www.gdal.org/frmt_gtiff.html and 
> http://www.gdal.org/gdaladdo.html for
> details.
> 
> I believe that modern QGIS versions have these options exposed in the
> GUI, but probably not as default.
> 
> So maybe there is room for potential to get a smaller size Geotiff.
> 
> Greetings,
> Andreas
> 
> On 2016-09-22 09:32, Reginald Carlier wrote:
> 
> Thanks Andreas,
> 
> Creating a Geotiff with pyramids did the trick. The only disadvantage
> is that it created a file of about 1.7 GB (the original was 90 MB).
> 
> Now I am ready to test the app J.
> 
> Regards,
> 
> *Van:*Neumann, Andreas [mailto:a.neum...@carto.net]
> *Verzonden:* woensdag 21 september 2016 16:19
> *Aan:* Reginald Carlier
> *Onderwerp:* Re: [Qgis-user] QField
> 
> Hi Reginald,
> 
> Did you create pyramids in the gpkg rasters?
> 
> Generally, Geotiff should be well supported - definitely more tested
> than gpkg rasters. I had a 1GB geotiff on qfield (on SD-Card) and it
> displays fast. I haven't tested vrt files with geotiffs - if it works
> as well?
> 
> Andreas
> 
> On 2016-09-21 15:44, Reginald Carlier wrote:
> 
> Hi Erwan,
> 
> You can look in the list of last week where I posted a couple of
> questions about qfield and was pointed to the right website for
> documentation.
> 
> I succeeded to publish a map on my phone but the aereal photo
> which was published as a gpkg file doesn't render. When I use the
> raster.gpkg on my desktop it renders but very slow.
> 
> The gpkg file was created from a 90 MB jp2 file.
> 
> Regards,
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-22 Thread Matthias Kuhn

QField does not (yet) support tiff with jpeg compression.

See:
http://www.qfield.org/docs/project-management/dataformat.html#raster-data

GeoPackage worked quite nice in our experience and can also be built in 
different resolutions (same page further down).

Matthias


On 09/22/2016 09:37 AM, Neumann, Andreas wrote:
> Hi Reginald,
>
> You can use the JPEG compression inside Geotiff. Note that this can be
> specified separately for both the full resolution and the pyramids. You
> can also select the compression factor to decrease the file size in
> trade off with quality.
>
> See
> also http://www.gdal.org/frmt_gtiff.html and 
> http://www.gdal.org/gdaladdo.html for
> details.
>
> I believe that modern QGIS versions have these options exposed in the
> GUI, but probably not as default.
>
> So maybe there is room for potential to get a smaller size Geotiff.
>
> Greetings,
> Andreas
>
> On 2016-09-22 09:32, Reginald Carlier wrote:
>
> > Thanks Andreas,
> >
> >  
> >
> > Creating a Geotiff with pyramids did the trick. The only disadvantage
> > is that it created a file of about 1.7 GB (the original was 90 MB).
> >
> > Now I am ready to test the app J.
> >
> >  
> >
> > Regards,
> >
> >  
> >
> > *Van:*Neumann, Andreas [mailto:a.neum...@carto.net]
> > *Verzonden:* woensdag 21 september 2016 16:19
> > *Aan:* Reginald Carlier
> > *Onderwerp:* Re: [Qgis-user] QField
> >
> >  
> >
> > Hi Reginald,
> >
> > Did you create pyramids in the gpkg rasters?
> >
> > Generally, Geotiff should be well supported - definitely more tested
> > than gpkg rasters. I had a 1GB geotiff on qfield (on SD-Card) and it
> > displays fast. I haven't tested vrt files with geotiffs - if it works
> > as well?
> >
> > Andreas
> >
> > On 2016-09-21 15:44, Reginald Carlier wrote:
> >
> > Hi Erwan,
> >
> >  
> >
> > You can look in the list of last week where I posted a couple of
> > questions about qfield and was pointed to the right website for
> > documentation.
> >
> > I succeeded to publish a map on my phone but the aereal photo
> > which was published as a gpkg file doesn't render. When I use the
> > raster.gpkg on my desktop it renders but very slow.
> >
> > The gpkg file was created from a 90 MB jp2 file.
> >
> >  
> >
> > Regards,
> >
> >  
> >
> >  
> >
> >  
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> >  
> >
> >  
> >
>  
>
>  
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-22 Thread Neumann, Andreas

Hi Reginald, 

You can use the JPEG compression inside Geotiff. Note that this can be
specified separately for both the full resolution and the pyramids. You
can also select the compression factor to decrease the file size in
trade off with quality. 

See also http://www.gdal.org/frmt_gtiff.html and
http://www.gdal.org/gdaladdo.html for details. 

I believe that modern QGIS versions have these options exposed in the
GUI, but probably not as default. 

So maybe there is room for potential to get a smaller size Geotiff. 

Greetings,
Andreas 

On 2016-09-22 09:32, Reginald Carlier wrote:

> Thanks Andreas, 
> 
> Creating a Geotiff with pyramids did the trick. The only disadvantage is that 
> it created a file of about 1.7 GB (the original was 90 MB). 
> 
> Now I am ready to test the app J. 
> 
> Regards, 
> 
> VAN: Neumann, Andreas [mailto:a.neum...@carto.net] 
> VERZONDEN: woensdag 21 september 2016 16:19
> AAN: Reginald Carlier
> ONDERWERP: Re: [Qgis-user] QField 
> 
> Hi Reginald, 
> 
> Did you create pyramids in the gpkg rasters? 
> 
> Generally, Geotiff should be well supported - definitely more tested than 
> gpkg rasters. I had a 1GB geotiff on qfield (on SD-Card) and it displays 
> fast. I haven't tested vrt files with geotiffs - if it works as well? 
> 
> Andreas 
> 
> On 2016-09-21 15:44, Reginald Carlier wrote:
> 
>> Hi Erwan, 
>> 
>> You can look in the list of last week where I posted a couple of questions 
>> about qfield and was pointed to the right website for documentation. 
>> 
>> I succeeded to publish a map on my phone but the aereal photo which was 
>> published as a gpkg file doesn't render. When I use the raster.gpkg on my 
>> desktop it renders but very slow. 
>> 
>> The gpkg file was created from a 90 MB jp2 file. 
>> 
>> Regards, 
>> 
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField

2016-09-22 Thread Reginald Carlier

Thanks Andreas,

Creating a Geotiff with pyramids did the trick. The only disadvantage is that 
it created a file of about 1.7 GB (the original was 90 MB).
Now I am ready to test the app ☺.

Regards,

Van: Neumann, Andreas [mailto:a.neum...@carto.net]
Verzonden: woensdag 21 september 2016 16:19
Aan: Reginald Carlier
Onderwerp: Re: [Qgis-user] QField


Hi Reginald,

Did you create pyramids in the gpkg rasters?

Generally, Geotiff should be well supported - definitely more tested than gpkg 
rasters. I had a 1GB geotiff on qfield (on SD-Card) and it displays fast. I 
haven't tested vrt files with geotiffs - if it works as well?

Andreas

On 2016-09-21 15:44, Reginald Carlier wrote:
Hi Erwan,

You can look in the list of last week where I posted a couple of questions 
about qfield and was pointed to the right website for documentation.
I succeeded to publish a map on my phone but the aereal photo which was 
published as a gpkg file doesn’t render. When I use the raster.gpkg on my 
desktop it renders but very slow.
The gpkg file was created from a 90 MB jp2 file.

Regards,



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Erwan Conseil

Thanks !!

> Le 21 sept. 2016 à 08:42,  
>  a écrit :
> 
> Hi Laurent,
> I've just make my first steps with QField last weekend and don't have any 
> Problems. I use QField under Android. There is a basic documentation under 
> [1]. I prepare the data in QGIS 2.16 (!) and use the "Offline Editing 
> plugin". It works fine and quite fast. WMS-Services are also working.
> 
> Regards
> Burghardt
> 
> [http://www.qfield.org/docs/]
> 
> 
>> -Ursprüngliche Nachricht-
>> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
>> Erwan Conseil
>> Gesendet: Dienstag, 20. September 2016 14:46
>> An: Qgis-user@lists.osgeo.org
>> Betreff: [Qgis-user] Qfield
>> 
>> Hi
>> Is there somebody who as already used Qfield ?
>> I have tried to transfert maps and forms from Qgis and I did'nt succeed
>> Do you know a tutorial for my  basic pb?
>> Thanks
>> Laurent
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Tyler Veinot

Thank you for the info.

On Wed, Sep 21, 2016 at 9:23 AM, Matthias Kuhn <matth...@opengis.ch> wrote:

> Hi,
>
> We still don't have SSL support in place for QField:
> https://github.com/opengisch/QField/issues/70
>
> Feel free to contact us if you need this topic to move ahead.
>
> Regards,
> Matthias
>
> On 09/21/2016 02:10 PM, burghardt.scho...@stadt.wolfsburg.de wrote:
> > Hi Tyler,
> >
> > both J(i.e. http://ows.terrestris.de/osm/service? – thanks to terrestris
> > GmbH & Co. KG).
> >
> > However, I must admit if encrypted services are used, I have
> > SSL-Problems outside the intranet with my self hosted custom WMS. The
> > log file shows the following error message: “WMS: Download of
> > capabilities failed: SSL handshake failed”. But I'm still near the
> > beginning of my tests.
> >
> >
> >
> > Regards
> >
> > Burghardt
> >
> >
> >
> > *Von:*Tyler Veinot [mailto:tylerkvei...@gmail.com]
> > *Gesendet:* Mittwoch, 21. September 2016 13:30
> > *An:* Scholle, Burghardt (15-3 GIS)
> > *Cc:* Erwan Conseil; QGIS User List
> > *Betreff:* Re: [Qgis-user] Qfield
> >
> >
> >
> > Burghardt
> >
> > What WMS services are you using, open data types served by OpenStreetMap
> > and the like or self hosted custom WMS layers?
> >
> > Tyler
> >
> >
> >
> > On Wed, Sep 21, 2016 at 3:42 AM, <burghardt.scho...@stadt.wolfsburg.de
> > <mailto:burghardt.scho...@stadt.wolfsburg.de>> wrote:
> >
> > Hi Laurent,
> > I've just make my first steps with QField last weekend and don't have
> > any Problems. I use QField under Android. There is a basic documentation
> > under [1]. I prepare the data in QGIS 2.16 (!) and use the "Offline
> > Editing plugin". It works fine and quite fast. WMS-Services are also
> > working.
> >
> > Regards
> > Burghardt
> >
> > [http://www.qfield.org/docs/]
> >
> >
> >> -Ursprüngliche Nachricht-
> >> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org
> > <mailto:qgis-user-boun...@lists.osgeo.org>] Im Auftrag von
> >> Erwan Conseil
> >> Gesendet: Dienstag, 20. September 2016 14:46
> >> An: Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> >> Betreff: [Qgis-user] Qfield
> >
> >>
> >> Hi
> >> Is there somebody who as already used Qfield ?
> >> I have tried to transfert maps and forms from Qgis and I did'nt
> > succeed
> >> Do you know a tutorial for my  basic pb?
> >> Thanks
> >> Laurent
> >> ___
> >> Qgis-user mailing list
> >> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> >> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> >
> >
> >
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Matthias Kuhn

Hi,

We still don't have SSL support in place for QField:
https://github.com/opengisch/QField/issues/70

Feel free to contact us if you need this topic to move ahead.

Regards,
Matthias

On 09/21/2016 02:10 PM, burghardt.scho...@stadt.wolfsburg.de wrote:
> Hi Tyler,
> 
> both J(i.e. http://ows.terrestris.de/osm/service? – thanks to terrestris
> GmbH & Co. KG).  
> 
> However, I must admit if encrypted services are used, I have
> SSL-Problems outside the intranet with my self hosted custom WMS. The
> log file shows the following error message: “WMS: Download of
> capabilities failed: SSL handshake failed”. But I'm still near the
> beginning of my tests.
> 
>  
> 
> Regards
> 
> Burghardt
> 
>  
> 
> *Von:*Tyler Veinot [mailto:tylerkvei...@gmail.com]
> *Gesendet:* Mittwoch, 21. September 2016 13:30
> *An:* Scholle, Burghardt (15-3 GIS)
> *Cc:* Erwan Conseil; QGIS User List
> *Betreff:* Re: [Qgis-user] Qfield
> 
>  
> 
> Burghardt
> 
> What WMS services are you using, open data types served by OpenStreetMap
> and the like or self hosted custom WMS layers?
> 
> Tyler
> 
>  
> 
> On Wed, Sep 21, 2016 at 3:42 AM, <burghardt.scho...@stadt.wolfsburg.de
> <mailto:burghardt.scho...@stadt.wolfsburg.de>> wrote:
> 
> Hi Laurent,
> I've just make my first steps with QField last weekend and don't have
> any Problems. I use QField under Android. There is a basic documentation
> under [1]. I prepare the data in QGIS 2.16 (!) and use the "Offline
> Editing plugin". It works fine and quite fast. WMS-Services are also
> working.
> 
> Regards
> Burghardt
> 
> [http://www.qfield.org/docs/]
> 
> 
>> -Ursprüngliche Nachricht-
>> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org
> <mailto:qgis-user-boun...@lists.osgeo.org>] Im Auftrag von
>> Erwan Conseil
>> Gesendet: Dienstag, 20. September 2016 14:46
>> An: Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>> Betreff: [Qgis-user] Qfield
> 
>>
>> Hi
>> Is there somebody who as already used Qfield ?
>> I have tried to transfert maps and forms from Qgis and I did'nt
> succeed
>> Do you know a tutorial for my  basic pb?
>> Thanks
>> Laurent
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
>  
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Burghardt.Scholle

Hi Tyler,
both ☺ (i.e. http://ows.terrestris.de/osm/service? – thanks to terrestris GmbH 
& Co. KG).
However, I must admit if encrypted services are used, I have SSL-Problems 
outside the intranet with my self hosted custom WMS. The log file shows the 
following error message: “WMS: Download of capabilities failed: SSL handshake 
failed”. But I'm still near the beginning of my tests.

Regards
Burghardt

Von: Tyler Veinot [mailto:tylerkvei...@gmail.com]
Gesendet: Mittwoch, 21. September 2016 13:30
An: Scholle, Burghardt (15-3 GIS)
Cc: Erwan Conseil; QGIS User List
Betreff: Re: [Qgis-user] Qfield

Burghardt
What WMS services are you using, open data types served by OpenStreetMap and 
the like or self hosted custom WMS layers?
Tyler

On Wed, Sep 21, 2016 at 3:42 AM, 
<burghardt.scho...@stadt.wolfsburg.de<mailto:burghardt.scho...@stadt.wolfsburg.de>>
 wrote:
Hi Laurent,
I've just make my first steps with QField last weekend and don't have any 
Problems. I use QField under Android. There is a basic documentation under [1]. 
I prepare the data in QGIS 2.16 (!) and use the "Offline Editing plugin". It 
works fine and quite fast. WMS-Services are also working.

Regards
Burghardt

[http://www.qfield.org/docs/]

> -Ursprüngliche Nachricht-
> Von: Qgis-user 
> [mailto:qgis-user-boun...@lists.osgeo.org<mailto:qgis-user-boun...@lists.osgeo.org>]
>  Im Auftrag von
> Erwan Conseil
> Gesendet: Dienstag, 20. September 2016 14:46
> An: Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
> Betreff: [Qgis-user] Qfield
>
> Hi
> Is there somebody who as already used Qfield ?
> I have tried to transfert maps and forms from Qgis and I did'nt succeed
> Do you know a tutorial for my  basic pb?
> Thanks
> Laurent
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Tyler Veinot

Burghardt
What WMS services are you using, open data types served by OpenStreetMap
and the like or self hosted custom WMS layers?
Tyler

On Wed, Sep 21, 2016 at 3:42 AM, 
wrote:

> Hi Laurent,
> I've just make my first steps with QField last weekend and don't have any
> Problems. I use QField under Android. There is a basic documentation under
> [1]. I prepare the data in QGIS 2.16 (!) and use the "Offline Editing
> plugin". It works fine and quite fast. WMS-Services are also working.
>
> Regards
> Burghardt
>
> [http://www.qfield.org/docs/]
>
>
> > -Ursprüngliche Nachricht-
> > Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> > Erwan Conseil
> > Gesendet: Dienstag, 20. September 2016 14:46
> > An: Qgis-user@lists.osgeo.org
> > Betreff: [Qgis-user] Qfield
> >
> > Hi
> > Is there somebody who as already used Qfield ?
> > I have tried to transfert maps and forms from Qgis and I did'nt
> succeed
> > Do you know a tutorial for my  basic pb?
> > Thanks
> > Laurent
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qfield

2016-09-21 Thread Burghardt.Scholle

Hi Laurent,
I've just make my first steps with QField last weekend and don't have any 
Problems. I use QField under Android. There is a basic documentation under [1]. 
I prepare the data in QGIS 2.16 (!) and use the "Offline Editing plugin". It 
works fine and quite fast. WMS-Services are also working.

Regards
Burghardt

[http://www.qfield.org/docs/]


> -Ursprüngliche Nachricht-
> Von: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] Im Auftrag von
> Erwan Conseil
> Gesendet: Dienstag, 20. September 2016 14:46
> An: Qgis-user@lists.osgeo.org
> Betreff: [Qgis-user] Qfield
> 
> Hi
> Is there somebody who as already used Qfield ?
> I have tried to transfert maps and forms from Qgis and I did'nt succeed
> Do you know a tutorial for my  basic pb?
> Thanks
> Laurent
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField error data source is not valid

2016-09-15 Thread Matthias Kuhn

Hi Reginald,

An additional note concerning raster data, it's best used in geopackage
format:

http://www.qfield.org/docs/project-management/dataformat.html#raster-data

Matthias

On 09/15/2016 08:38 AM, Matthias Kuhn wrote:
> Hi Reginald,
> 
> Does the page http://qfield.org/docs not work for you?
> 
> We are currently fixing the links on the main page.
> 
> Regards
> Matthias
> 
> On 09/14/2016 04:03 PM, Reginald Carlier wrote:
>> Tyler,
>>
>>  
>>
>> What is a OGR dataset? I’m using a aereal photo raster and a shapefile
>> in my project. There are no date fields in the shapefile.
>>
>> The documentation gives a 404 error. Who is the developer of this app?
>>
>> Where can I find his mail address so I can give a notice about the
>> broken website.
>>
>>  
>>
>> Regards,
>>
>>  
>>
>> *Van:*Tyler Veinot [mailto:tylerkvei...@gmail.com]
>> *Verzonden:* woensdag 14 september 2016 14:28
>> *Aan:* Reginald Carlier
>> *Onderwerp:* Re: [Qgis-user] QField error data source is not valid
>>
>>  
>>
>> Reginald;
>>
>> I have been having problems with OGR datasets that have an assigned
>> vertical datum. I suspect Matthias is correct but if that doesn't solve
>> the issue and you are using a vertical datum that might be the issue.
>>
>> On the documentation site http://www.qfield.org/ there was amention
>> about some possible issues with OGR datasets but I get a 404 error now
>> so I cannot reference the specific passage under the supported data formats.
>>
>> Hope that helps some;
>>
>> Tyler
>>
>>  
>>
>> On Wed, Sep 14, 2016 at 4:41 AM, Reginald Carlier
>> <reginald.carl...@ingelmunster.be
>> <mailto:reginald.carl...@ingelmunster.be>> wrote:
>>
>> Hi,
>>
>>  
>>
>> I’m testing QField. On my desktop I made a project with a shape point
>> layer made to inventarise streetbenches.
>>
>> Then I put this project in the storage folder (DCIM) of my android phone.
>>
>> On my phone I open QField and I browse to the project and I open it.
>>
>> In stead of a map I see only a point marker in QField.
>>
>> The error message I see is: OGR Data source is invalid()
>>
>> What am I doing wrong?
>>
>> Also I could not find any documentation on QField. Any pointers in this
>> direction?
>>
>>  
>>
>> Regards,
>>
>>  
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>>  
>>
>>
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField error data source is not valid

2016-09-15 Thread Matthias Kuhn

Hi Reginald,

Does the page http://qfield.org/docs not work for you?

We are currently fixing the links on the main page.

Regards
Matthias

On 09/14/2016 04:03 PM, Reginald Carlier wrote:
> Tyler,
> 
>  
> 
> What is a OGR dataset? I’m using a aereal photo raster and a shapefile
> in my project. There are no date fields in the shapefile.
> 
> The documentation gives a 404 error. Who is the developer of this app?
> 
> Where can I find his mail address so I can give a notice about the
> broken website.
> 
>  
> 
> Regards,
> 
>  
> 
> *Van:*Tyler Veinot [mailto:tylerkvei...@gmail.com]
> *Verzonden:* woensdag 14 september 2016 14:28
> *Aan:* Reginald Carlier
> *Onderwerp:* Re: [Qgis-user] QField error data source is not valid
> 
>  
> 
> Reginald;
> 
> I have been having problems with OGR datasets that have an assigned
> vertical datum. I suspect Matthias is correct but if that doesn't solve
> the issue and you are using a vertical datum that might be the issue.
> 
> On the documentation site http://www.qfield.org/ there was amention
> about some possible issues with OGR datasets but I get a 404 error now
> so I cannot reference the specific passage under the supported data formats.
> 
> Hope that helps some;
> 
> Tyler
> 
>  
> 
> On Wed, Sep 14, 2016 at 4:41 AM, Reginald Carlier
> <reginald.carl...@ingelmunster.be
> <mailto:reginald.carl...@ingelmunster.be>> wrote:
> 
> Hi,
> 
>  
> 
> I’m testing QField. On my desktop I made a project with a shape point
> layer made to inventarise streetbenches.
> 
> Then I put this project in the storage folder (DCIM) of my android phone.
> 
> On my phone I open QField and I browse to the project and I open it.
> 
> In stead of a map I see only a point marker in QField.
> 
> The error message I see is: OGR Data source is invalid()
> 
> What am I doing wrong?
> 
> Also I could not find any documentation on QField. Any pointers in this
> direction?
> 
>  
> 
> Regards,
> 
>  
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
>  
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField error data source is not valid

2016-09-14 Thread Reginald Carlier

Tyler,

What is a OGR dataset? I’m using a aereal photo raster and a shapefile in my 
project. There are no date fields in the shapefile.
The documentation gives a 404 error. Who is the developer of this app?
Where can I find his mail address so I can give a notice about the broken 
website.

Regards,

Van: Tyler Veinot [mailto:tylerkvei...@gmail.com]
Verzonden: woensdag 14 september 2016 14:28
Aan: Reginald Carlier
Onderwerp: Re: [Qgis-user] QField error data source is not valid

Reginald;
I have been having problems with OGR datasets that have an assigned vertical 
datum. I suspect Matthias is correct but if that doesn't solve the issue and 
you are using a vertical datum that might be the issue.
On the documentation site http://www.qfield.org/ there was amention about some 
possible issues with OGR datasets but I get a 404 error now so I cannot 
reference the specific passage under the supported data formats.
Hope that helps some;
Tyler

On Wed, Sep 14, 2016 at 4:41 AM, Reginald Carlier 
<reginald.carl...@ingelmunster.be<mailto:reginald.carl...@ingelmunster.be>> 
wrote:
Hi,

I’m testing QField. On my desktop I made a project with a shape point layer 
made to inventarise streetbenches.
Then I put this project in the storage folder (DCIM) of my android phone.
On my phone I open QField and I browse to the project and I open it.
In stead of a map I see only a point marker in QField.
The error message I see is: OGR Data source is invalid()
What am I doing wrong?
Also I could not find any documentation on QField. Any pointers in this 
direction?

Regards,


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField error data source is not valid

2016-09-14 Thread Matthias Kuhn

Hi Reginald,

It's most likely that your project is not portable (i.e. paths inside
are not relative).

The documentation can be found here:
http://www.qfield.org/docs/

And about the portable project in particular here:
http://www.qfield.org/docs/project-management/index.html

Best regards
Matthias

On 09/14/2016 09:41 AM, Reginald Carlier wrote:
> Hi,
> 
>  
> 
> I’m testing QField. On my desktop I made a project with a shape point
> layer made to inventarise streetbenches.
> 
> Then I put this project in the storage folder (DCIM) of my android phone.
> 
> On my phone I open QField and I browse to the project and I open it.
> 
> In stead of a map I see only a point marker in QField.
> 
> The error message I see is: OGR Data source is invalid()
> 
> What am I doing wrong?
> 
> Also I could not find any documentation on QField. Any pointers in this
> direction?
> 
>  
> 
> Regards,
> 
>  
> 
> 
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QField digitized shapefiles cannot be opended in qgis desktop

2016-05-18 Thread Neumann, Andreas

Hi Andreas, 

I know it sounds stupid: but did you really transfer all connected files
and not just the shp? Note that the shapefile consists of multiple files
(.shp, .dbf, .shx, .prj and some more) - they all have the same filename
but different extensions. 

Just to double check ... 

Greetings, 

Andreas 

On 2016-05-18 10:03, Andreas Sauter wrote:

> Hi List,
> 
> i set up a qfield projekt in Qgis Desktop 2.8. After sendig all Data to the 
> tablet it worked perfekt in the field. Digitizing was perfekt. After i went 
> home i wantet to transfer the shape i digitized in to my computer.
> 
> After copying the shape to the pc i could not open the file. It always says 
> "unknown datasoure". Whats the Problem? I see all the digitized Points and 
> Attrinutes on my Tablet, but on the Desktop the shape doesnt work.
> 
> Thanks for your help.
> 
> Andreas

  ___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

46 matches

Mail list logo