Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Jake, That's right. OpenLayre is a plugin layer. In my case, it is Crayfish layer which seems to cause the problem to happen more often. Cheers, Saber -Original Message- From: Jake Maier To: 'Saber Razmjooei' , 'Hayashi Reiko' , qgis-user@lists.osgeo.org Subject: RE: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Date: Wed, 12 Feb 2014 07:10:48 -0500 Saber, thanks for your answer. What do you mean with a plugin layer I had a openlayer google layer loaded but only on this last incident Before it also happened without an openlayer layer loaded Jake -Original Message- From: Saber Razmjooei [mailto:saber.razmjo...@lutraconsulting.co.uk] Sent: Wednesday, February 12, 2014 4:14 AM To: 'Jake Maier'; 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: RE: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Do you happen to have a "plugin layer" loaded? For me it happens more often if I have a plugin layer loaded. Cheers, Saber -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: 11 February 2014 15:42 To: 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox "Update drawing order" at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan : > > I suspect you are familiar with layer drawing order. > If not, drag different layers that display in the "Layers" box on the > left side to the top of the list. > > If that is not the problem what is your OS and QGIS version number? > > > Mike > > > > On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: >> >> Date: Sun, 9 Feb 2014 20:00:13 -0500 >> From: "Jake Maier" To: >> Subject: [Qgis-user] layers have sometimes have to be turned on and >> off and on again to show up >> Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Since qgis 1.8, I sometimes have to turn layers on and off and on >> again, sometime 3 or 4 times, to make them show on the canvas. This >> is not a consistent problem >> >> >> Does anyone know what the problem may be? >> >> >> Jake > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Whilst reasonable care has been taken to avoid virus transmission, no responsibility for viruses is taken and it is your responsibility to carry out such checks as you feel appropriate. If this email contains a quote or offer to sell products, carry out work or perform services then our standard terms and conditions (which can be found at http://www.lutraconsulting.
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Saber, thanks for your answer. What do you mean with a plugin layer I had a openlayer google layer loaded but only on this last incident Before it also happened without an openlayer layer loaded Jake -Original Message- From: Saber Razmjooei [mailto:saber.razmjo...@lutraconsulting.co.uk] Sent: Wednesday, February 12, 2014 4:14 AM To: 'Jake Maier'; 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: RE: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Do you happen to have a "plugin layer" loaded? For me it happens more often if I have a plugin layer loaded. Cheers, Saber -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: 11 February 2014 15:42 To: 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox "Update drawing order" at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan : > > I suspect you are familiar with layer drawing order. > If not, drag different layers that display in the "Layers" box on the > left side to the top of the list. > > If that is not the problem what is your OS and QGIS version number? > > > Mike > > > > On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: >> >> Date: Sun, 9 Feb 2014 20:00:13 -0500 >> From: "Jake Maier" To: >> Subject: [Qgis-user] layers have sometimes have to be turned on and >> off and on again to show up >> Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Since qgis 1.8, I sometimes have to turn layers on and off and on >> again, sometime 3 or 4 times, to make them show on the canvas. This >> is not a consistent problem >> >> >> Does anyone know what the problem may be? >> >> >> Jake > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Whilst reasonable care has been taken to avoid virus transmission, no responsibility for viruses is taken and it is your responsibility to carry out such checks as you feel appropriate. If this email contains a quote or offer to sell products, carry out work or perform services then our standard terms and conditions (which can be found at http://www.lutraconsulting.co.uk/downloads/Lutra%20Consulting%20Standard%20Terms%20and%20Conditions.pdf shall apply unless explicitly stated otherwise. Saber Razmjooei and Peter Wells trading as Lutra Consulting. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Do you happen to have a "plugin layer" loaded? For me it happens more often if I have a plugin layer loaded. Cheers, Saber -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: 11 February 2014 15:42 To: 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox "Update drawing order" at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan : > > I suspect you are familiar with layer drawing order. > If not, drag different layers that display in the "Layers" box on the > left side to the top of the list. > > If that is not the problem what is your OS and QGIS version number? > > > Mike > > > > On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: >> >> Date: Sun, 9 Feb 2014 20:00:13 -0500 >> From: "Jake Maier" To: >> Subject: [Qgis-user] layers have sometimes have to be turned on and >> off and on again to show up >> Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Since qgis 1.8, I sometimes have to turn layers on and off and on >> again, sometime 3 or 4 times, to make them show on the canvas. This >> is not a consistent problem >> >> >> Does anyone know what the problem may be? >> >> >> Jake > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Whilst reasonable care has been taken to avoid virus transmission, no responsibility for viruses is taken and it is your responsibility to carry out such checks as you feel appropriate. If this email contains a quote or offer to sell products, carry out work or perform services then our standard terms and conditions (which can be found at http://www.lutraconsulting.co.uk/downloads/Lutra%20Consulting%20Standard%20Terms%20and%20Conditions.pdf shall apply unless explicitly stated otherwise. Saber Razmjooei and Peter Wells trading as Lutra Consulting. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Don, I run the 64 bit version. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Saulteau Don Sent: Tuesday, February 11, 2014 6:32 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up > On 2/11/2014 8:01 AM, Anita Graser wrote: > > I've seen this happen as well. I think it happens both on Windows and > Ubuntu - but certainly on Ubuntu. The issue seems to appear when you > change a layer's visibility in the layer list while the map is still > being rendered. QGIS ignores the change you do while the map is > rendering and thus the user can end up with layers which are > deactivated in the layer list, but still drawn in the map. To fix it, > the user has to enable and disable the layer again. > > If someone can confirm this in master, we should open a ticket. > > Best wishes, > Anita http://hub.qgis.org/issues/8231 Closed as invalid. I've got fresh installs of QGIS with this same rendering issue. I think this ticket needs to be re-opened. Note 10 in that ticket (http://hub.qgis.org/issues/8231#note-10) describes: "The problem only occurs when the "Improved Polygon Capturing " plug-in is enabled in the 32-bit version and there are PostGIS layers in the document - a fairly unique situation, which explains why it wasn't occurring for you. We will simply disable this plugin when not being used, and your help troubleshooting is much appreciated. Hopefully this plugin can be fixed by its creator so other users don't have the same issue. Thanks again!" But I'm not sure if that's the cause. I've been sporting spatialite for a while now =) Donovan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
> On 2/11/2014 8:01 AM, Anita Graser wrote: I've seen this happen as well. I think it happens both on Windows and Ubuntu - but certainly on Ubuntu. The issue seems to appear when you change a layer's visibility in the layer list while the map is still being rendered. QGIS ignores the change you do while the map is rendering and thus the user can end up with layers which are deactivated in the layer list, but still drawn in the map. To fix it, the user has to enable and disable the layer again. If someone can confirm this in master, we should open a ticket. Best wishes, Anita http://hub.qgis.org/issues/8231 Closed as invalid. I've got fresh installs of QGIS with this same rendering issue. I think this ticket needs to be re-opened. Note 10 in that ticket (http://hub.qgis.org/issues/8231#note-10) describes: "The problem only occurs when the "Improved Polygon Capturing" plug-in is enabled in the 32-bit version and there are PostGIS layers in the document - a fairly unique situation, which explains why it wasn't occurring for you. We will simply disable this plugin when not being used, and your help troubleshooting is much appreciated. Hopefully this plugin can be fixed by its creator so other users don't have the same issue. Thanks again!" But I'm not sure if that's the cause. I've been sporting spatialite for a while now =) Donovan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox "Update drawing order" at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan : > > I suspect you are familiar with layer drawing order. > If not, drag different layers that display in the "Layers" box on the > left side to the top of the list. > > If that is not the problem what is your OS and QGIS version number? > > > Mike > > > > On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: >> >> Date: Sun, 9 Feb 2014 20:00:13 -0500 >> From: "Jake Maier" >> To: >> Subject: [Qgis-user] layers have sometimes have to be turned on and >> off and on again to show up >> Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Since qgis 1.8, I sometimes have to turn layers on and off and on again, >> sometime 3 or 4 times, to make them show on the canvas. This is not a >> consistent problem >> >> >> Does anyone know what the problem may be? >> >> >> Jake > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: Date: Sun, 9 Feb 2014 20:00:13 -0500 From: "Jake Maier" To: Subject: [Qgis-user] layers have sometimes have to be turned on and off and on again to show up Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> Content-Type: text/plain; charset="us-ascii" Since qgis 1.8, I sometimes have to turn layers on and off and on again, sometime 3 or 4 times, to make them show on the canvas. This is not a consistent problem I've seen this happen as well. I think it happens both on Windows and Ubuntu - but certainly on Ubuntu. The issue seems to appear when you change a layer's visibility in the layer list while the map is still being rendered. QGIS ignores the change you do while the map is rendering and thus the user can end up with layers which are deactivated in the layer list, but still drawn in the map. To fix it, the user has to enable and disable the layer again. If someone can confirm this in master, we should open a ticket. Best wishes, Anita -- anitagraser.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Thank you for your response, Mike Yes I am aware of the drawing order. I have win 7 and the problem occurred with all versions I used. It started with 1.8 (my first version) and continued I think with all versions and now it occurred with version QGIS version2.1.0-MasterQGIS code revision d647354 Compiled against Qt 4.8.5 Running against Qt 4.8.5 Compiled against GDAL/OGR 1.10.1 Running against GDAL/OGR 1.10.1 Compiled against GEOS 3.4.2-CAPI-1.8.2Running against GEOS 3.4.2-CAPI-1.8.2 r3921 PostgreSQL Client Version 9.2.4 SpatiaLite Version 4.1.1 QWT Version 5.2.3 PROJ.4 Version 480 QScintilla2 Version 2.7.2 This copy of QGIS writes debugging output. I never could reproduce it, and it sometimes happens and sometimes not. I have no idea so far what may trigger it. There was just 2 days ago another maybe related incident. I downloaded openlayer plugin and loaded google map. First it displayed at the right location compared to the other layers. But when I panned the image the google layer all of a sudden displayed about 1000 feet to the west. After zooming out a bit, it again displayed at the correct location. I don't know if these two problems are connected but I wanted to mention it. Thanks again very much for your help. This is such an incredible service. Jake -Original Message- From: Mike Flannigan [mailto:mikef...@att.net] Sent: Tuesday, February 11, 2014 8:32 AM To: qgis-user@lists.osgeo.org Cc: j...@jmforestry.com Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I suspect you are familiar with layer drawing order. If not, drag different layers that display in the "Layers" box on the left side to the top of the list. If that is not the problem what is your OS and QGIS version number? Mike On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: > Date: Sun, 9 Feb 2014 20:00:13 -0500 > From: "Jake Maier" To: > Subject: [Qgis-user] layers have sometimes have to be turned on and > off and on again to show up > Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> > Content-Type: text/plain; charset="us-ascii" > > Since qgis 1.8, I sometimes have to turn layers on and off and on > again, sometime 3 or 4 times, to make them show on the canvas. This is > not a consistent problem > > > > Does anyone know what the problem may be? > > > > Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
I had the same problem, but found out that there is a checkbox "Update drawing order" at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan : > > I suspect you are familiar with layer drawing order. > If not, drag different layers that display in the > "Layers" box on the left side to the top of the list. > > If that is not the problem what is your OS and QGIS > version number? > > > Mike > > > > On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: >> >> Date: Sun, 9 Feb 2014 20:00:13 -0500 >> From: "Jake Maier" >> To: >> Subject: [Qgis-user] layers have sometimes have to be turned on and >> off and on again to show up >> Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Since qgis 1.8, I sometimes have to turn layers on and off and on again, >> sometime 3 or 4 times, to make them show on the canvas. This is not a >> consistent problem >> >> >> Does anyone know what the problem may be? >> >> >> Jake > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
I suspect you are familiar with layer drawing order. If not, drag different layers that display in the "Layers" box on the left side to the top of the list. If that is not the problem what is your OS and QGIS version number? Mike On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: Date: Sun, 9 Feb 2014 20:00:13 -0500 From: "Jake Maier" To: Subject: [Qgis-user] layers have sometimes have to be turned on and off and on again to show up Message-ID:<01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com> Content-Type: text/plain; charset="us-ascii" Since qgis 1.8, I sometimes have to turn layers on and off and on again, sometime 3 or 4 times, to make them show on the canvas. This is not a consistent problem Does anyone know what the problem may be? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
