Re: [Ql-Users] io.fline end of line
On 13/09/2010 16:05, QL-Mylink wrote: Re: Malcolm's - Hi, I've noticed some inconsistent handling of text files in QPC2. The problem was reading text files with both carriage return and line feed at the end of line. Several programs could read these files from the qxl.win drive without complaint. However the same file being read from a dos or ram drives caused problems. One particular program that got upset was the GST assembler. I finally tracked the problem down to the io.flin trap. It was converting the carriage return to a line feed, but only on the win drive. Is there any switch to change this behaviour and have it working on all drives? Or is this a bug? Cheers Malcolm = Thank you Malcolm. You've revealed a previously unkown scource of some of my historical headaches. Best wishes, John in Wales ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm I've now located the code that does the character replacement in dv3_dv3_buff_asm. However I can't seem to get QMON into supervisor mode using LS. Maybe it's just my copy of QMON or I'm doing something stupid (quite possible). Cheers Malcolm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] io.fline end of line
On 14/09/2010 16:28, gdgqler wrote: On 14 Sep 2010, at 13:54, Malcolm Lear wrote: I've now located the code that does the character replacement in dv3_dv3_buff_asm. However I can't seem to get QMON into supervisor mode using LS. Maybe it's just my copy of QMON or I'm doing something stupid (quite possible). I've never successfully used LS with QMON. Anyway when it works you can't look at ram - all you get is the contents of registers and so on displayed by QMON. On Sunday I was looking at a bit of SMSQE code which went into supervisor mode (to allow the use of A6 commented the program) so I used SPC to step round the trap #0 instruction. Perhaps you can use that in buff_asm. George ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm Thanks George, I'll give it a go. Have you any idea if QMON ever worked in supervisor mode or is it an issue with SMSQE? Malcolm ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
Re: [Ql-Users] Ql-Users Digest, Vol 79, Issue 9
In message 4c8e9ec6.9020...@rwapservices.co.uk, Rich Mellor r...@rwapservices.co.uk writes On 13/09/2010 21:44, Malcolm Cadman wrote: In message 8dc375c04ba74aaa97ecc1b57990e...@pcvanluk, Luk Vangenechten luk.vangenech...@skynet.be writes Hi I've already mailed to Microvitec but i'm sorry to say their answer was Unfortunately we don't have anything to offer which is compatible with the QL. Luk. Hi Luk, The old Microvitec Monitors are fine with the QL, or any RGB output. You will need to either solder up a cable, yourself, or get one made up. Wiring diagrams should be found in the old computer magazines. I have used Microvitec Monitors for years with both the BBC B, and the QL. They are very reliable monitors. There is a Sinclair QL vision monitor on SellMyRetro.com at the moment - http://www.sellmyretro.com/offer/details/Sinclair_QL_Vision_Colour_Monit or-954 I also have a Microvitec Cub which I need to test. The main issue is sending these monitors anywhere - I have never had one survive transit (except taken in a car) yet. Hi Rich, The early ones had a metal case - to survive the tough world of school use. -- Malcolm Cadman ___ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
