Re: Automaildir.
Thanks Claudio, ill change it. Regards, Layn. On Sat, Oct 01, 2005 at 06:24:41PM +0200, Layn wrote: Thansk for your faster reply, now the directory is created: drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata This directory is empty, no Maildir, no cur, no new, no tmp... And the log say: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) This is fallout from changing LDAP_HOMEDIR to mailMessageStore (see other mail that I just sent). Change LDAP_HOMEDIR to something like "noHomeDirectory" or so.
Re: Automaildir.
On Sat, Oct 01, 2005 at 06:24:41PM +0200, Layn wrote: >Thansk for your faster reply, now the directory is created: > >drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata > >This directory is empty, no Maildir, no cur, no new, no tmp... > >And the log say: > >deferral: > Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) > This is fallout from changing LDAP_HOMEDIR to mailMessageStore (see other mail that I just sent). Change LDAP_HOMEDIR to something like "noHomeDirectory" or so. -- :wq Claudio
Re: Automaildir.
On Sat, Oct 01, 2005 at 09:22:39PM +0530, Amit wrote: > > Hi Layn, > > Solution is quite simple - I'll just point it out one by one > > 1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'. > 2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to > 'mailMessageStore' This is a bad advice. Never change LDAP_HOMEDIR to the same as LDAP_MAILSTORE. With that you will loose aliasempty as delivery method and the mail will be delivered with the instructions in mailMessageStore. So if mailMessageStore does not end with a "/" the delivery will fail because it tries to do a mailbox delivery to a directory. Use "noHomeDirectory" or some other non existant attribute name instead. -- :wq Claudio
Re: Automaildir.
Thankyou very much!!! It work!, the problem was in mailMessageStore attribute. This form dont work: mailMessageStore: /var/qmail/maildirs/midori2 But this form work: mailMessageStore: /var/qmail/maildirs/midori2/ The last " / " was the problem. This is my ldap's user configuration now: dn: [EMAIL PROTECTED],dc=example,dc=com cn: midori2 sn: midori2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: [EMAIL PROTECTED] mail: [EMAIL PROTECTED] mailHost: smtp.example.com mailAlternateAddress: [EMAIL PROTECTED] mailMessageStore: /var/qmail/maildirs/midori2/ userPassword: 123456 deliveryMode: noprogram accountStatus: Active Thanks! Layn. Hi, You do not need to create the 'Maildir' maildir under /var/qmail/maildirs/kare2/. This is what is creating the problem. 1. Home directory for user 'layn' is - /var/qmail/maildirs So now when you add a new user in ldap, qmail will see that /var/qmail/maildirs is the home directory and then will create the missing home directory 'layn' under /var/qmail/maildirs/ with the required permissions. 2. Maildir for user 'layn' is also - /var/qmail/maildirs/layn This is a directory in 'maildir' format. The directory '/var/qmail/maildirs/lyn' will be automatically created by the dirmaker script when you add the user 'lyn' to the ldap database. Thus, your dirmaker file should have the contents given below: I have used the normal /var/qmail/bin/dirmaker and this: #!/bin/sh mkdir -m 700 -p $1 The entires following are not required. Although you need to give the command chmod -R vmail:vmail /var/qmail/maildirs /var/qmail/bin/maildirmake $1/Maildir chown -R vmail:vmail $1 chmod -R 700 $1 3. Now send a mail using the mail command mail [EMAIL PROTECTED] -s "Hello" You will see that the maildir will be automatically created, and the subdirectories 'cur' , 'new' and 'tmp' will be created too and this new mail will be stored under directory 'new'. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Sunday, October 02, 2005 5:12 AM Subject: Re: Automaildir. If i dont specific full path its dont work, i get a attributes error and this: # /var/qmail/bin/qmail-ldaplookup -d 255 -m [EMAIL PROTECTED] Searching ldap for: (&(objectClass=qmailUser)(|([EMAIL PROTECTED])(mailAlternateAddress=inu4 @example.com))) under dn: dc=example,dc=com Found 1 entry: dn: [EMAIL PROTECTED],dc=example,dc=com --- objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser mail: [EMAIL PROTECTED] mailAlternateAddress: [EMAIL PROTECTED] uid: [EMAIL PROTECTED] accountStatus: active mailHost: smtp.example.com qmail-ldaplookup: fatal: qldap_get_mailstore: illegal value On mailMessageStore: just put the domain name and the user do not put the full path, something like this: mailMessageStore: kare2 do not put /var/qmail/maildirs/kare2 ldap will use the info that is on ldapmessagestore for going to the users home. regards. On Oct 1, 2005, at 5:38 PM, Layn wrote: Nothing, its the same: deferral: Unable_to_open_/var/qmail/maildirs/ kare2:_is_a_directory._(#4.2.1)/ This is the ldap's kare2 users: shuhi:/var/qmail# /var/qmail/bin/qmail-ldaplookup -d 255 -m [EMAIL PROTECTED] Searching ldap for: (&(objectClass=qmailUser)(| ([EMAIL PROTECTED])([EMAIL PROTECTED]))) under dn: dc=example,dc=com Found 1 entry: dn: [EMAIL PROTECTED],dc=example,dc=com --- objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser mail: [EMAIL PROTECTED] uid: [EMAIL PROTECTED] accountStatus: active mailHost: smtp.example.com homeDirectory: /var/qmail/maildirs/kare2 aliasEmpty: /var/qmail/maildirs/kare2 qmailDotMode: ldaponly qmailUID: 11184 qmailGID: 2110 mailQuotaSize: 100 mailQuotaCount: 1000 mailSizeMax: 0 (unlimited) deliveryMode: noprogram mailReplyText: undefined And it was create with the next attributes: shuhi:/var/qmail# cat /tmp/user.ldif dn: [EMAIL PROTECTED],dc=example,dc=com cn: kare2 sn: kare2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: [EMAIL PROTECTED] mail: [EMAIL PROTECTED] mailHost: smtp.example.com homeDirectory: /var/qmail/maildirs/kare2 mailMessageStore: /var/qmail/maildirs/kare2 userPassword: 123456 deliveryMode: noprogram accountStatus: Active ldapadd -x -H ldap://localhost/ -D "cn=admin,dc=example,dc=com" -W - f /tmp/user.ldif And now, send a mail to kare2: #echo To: [EMAIL PROTECTED] | /var/qmail/bin/qmail-inject And the log: @4000433f09da0e33a49c info msg 811919: bytes 206 from <
Re: Automaildir.
Hi, You do not need to create the 'Maildir' maildir under /var/qmail/maildirs/kare2/. This is what is creating the problem. 1. Home directory for user 'layn' is - /var/qmail/maildirs So now when you add a new user in ldap, qmail will see that /var/qmail/maildirs is the home directory and then will create the missing home directory 'layn' under /var/qmail/maildirs/ with the required permissions. 2. Maildir for user 'layn' is also - /var/qmail/maildirs/layn This is a directory in 'maildir' format. The directory '/var/qmail/maildirs/lyn' will be automatically created by the dirmaker script when you add the user 'lyn' to the ldap database. Thus, your dirmaker file should have the contents given below: > >> I have used the normal /var/qmail/bin/dirmaker and this: > >> #!/bin/sh > >> mkdir -m 700 -p $1 The entires following are not required. Although you need to give the command chmod -R vmail:vmail /var/qmail/maildirs > >> /var/qmail/bin/maildirmake $1/Maildir > >> chown -R vmail:vmail $1 > >> chmod -R 700 $1 3. Now send a mail using the mail command mail [EMAIL PROTECTED] -s "Hello" You will see that the maildir will be automatically created, and the subdirectories 'cur' , 'new' and 'tmp' will be created too and this new mail will be stored under directory 'new'. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Sunday, October 02, 2005 5:12 AM Subject: Re: Automaildir. > If i dont specific full path its dont work, i get a attributes error > and this: > > # /var/qmail/bin/qmail-ldaplookup -d 255 -m [EMAIL PROTECTED] > Searching ldap for: > (&(objectClass=qmailUser)(|([EMAIL PROTECTED])(mailAlternateAddress=inu4 @example.com))) > under dn: dc=example,dc=com > Found 1 entry: > > dn: [EMAIL PROTECTED],dc=example,dc=com > --- > objectClass: person > objectClass: top > objectClass: inetOrgPerson > objectClass: qmailUser > mail: [EMAIL PROTECTED] > mailAlternateAddress: [EMAIL PROTECTED] > uid: [EMAIL PROTECTED] > accountStatus: active > mailHost: smtp.example.com > qmail-ldaplookup: fatal: qldap_get_mailstore: illegal value > > > > > > On mailMessageStore: just put the domain name and the user do not put > > the full path, something like this: > > > > mailMessageStore: kare2 > > > > do not put /var/qmail/maildirs/kare2 > > > > ldap will use the info that is on ldapmessagestore for going to the > > users home. > > > > regards. > > > > > > On Oct 1, 2005, at 5:38 PM, Layn wrote: > > > >>Nothing, its the same: > >> > >>deferral: Unable_to_open_/var/qmail/maildirs/ > >> kare2:_is_a_directory._(#4.2.1)/ > >> > >>This is the ldap's kare2 users: > >> > >> shuhi:/var/qmail# /var/qmail/bin/qmail-ldaplookup -d 255 -m > >> [EMAIL PROTECTED] > >> Searching ldap for: (&(objectClass=qmailUser)(| > >> ([EMAIL PROTECTED])([EMAIL PROTECTED]))) > >> under dn: dc=example,dc=com > >> Found 1 entry: > >> > >> dn: [EMAIL PROTECTED],dc=example,dc=com > >> --- > >> objectClass: person > >> objectClass: top > >> objectClass: inetOrgPerson > >> objectClass: qmailUser > >> mail: [EMAIL PROTECTED] > >> uid: [EMAIL PROTECTED] > >> accountStatus: active > >> mailHost: smtp.example.com > >> homeDirectory: /var/qmail/maildirs/kare2 > >> aliasEmpty: /var/qmail/maildirs/kare2 > >> qmailDotMode: ldaponly > >> qmailUID: 11184 > >> qmailGID: 2110 > >> mailQuotaSize: 100 > >> mailQuotaCount: 1000 > >> mailSizeMax: 0 (unlimited) > >> deliveryMode: noprogram > >> mailReplyText: undefined > >> > >> > >> And it was create with the next attributes: > >> > >> shuhi:/var/qmail# cat /tmp/user.ldif > >> dn: [EMAIL PROTECTED],dc=example,dc=com > >> cn: kare2 > >> sn: kare2 > >> objectClass: person > >> objectClass: top > >> objectClass: inetOrgPerson > >> objectClass: qmailUser > >> o: example > >> uid: [EMAIL PROTECTED] > >> mail: [EMAIL PROTECTED] > >> mailHost: smtp.example.com > >> homeDirectory: /var/qmail/maildirs/kare2 > >> mailMessageStore: /var/qmail/maildirs/kare2 > >> userPassword: 123456 > >> deliveryMode: noprogram > &
Re: Automaildir.
end Directives for ldbm:
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
backend ldbm
## #
# Specific Directives for database #1, of type ldbm:
# Database specific directives apply to this databasse until another
# 'database' directive occurs
databaseldbm
suffix "dc=example,dc=com"
#suffix "o=example"
directory "/var/lib/ldap"
index objectClass eq
rootdn "cn=admin,dc=example,dc=com"
rootbinddn "cn=admin,dc=example,dc=com"
#rootpw {SSHA}4162+KLfc6cKgOg7g6Os0lnfVKk6bHa8
rootpw 1234
If a comment the rootpw directive i get the next error:
@4000433f0e7a181707c4 info msg 811843: bytes 206 from
<[EMAIL PROTECTED]> qp 6326 uid 0
@4000433f0e7a19025ddc starting delivery 207: msg 811843 to local
[EMAIL PROTECTED]
@4000433f0e7a190484a4 status: local 1/10 remote 0/20
@4000433f0e7a1a2c14b4 delivery 207: deferral:
Unable_to_login_into_LDAP_server,_bad_credentials._(#4.4.3)/
@4000433f0e7a1a2c37dc status: local 0/10 remote 0/20
So i put uncoment.
I dont think that the error is in slapd.conf, because, before
(now no) if i created user/Maildir, it run, so i thinks the server
is good, maybe a bad configuration with user definition or, Makefile
of qmail-1.03 source i dont know, in Makefile i have do:
LDAPLIBS=-L/usr/local/lib -lldap -llber -lresolv (añadir -lresolv
que no estaba).
MDIRMAKE=DAUTOMAILDIRMAKE
HDIRMAKE=DAUTOHOMEDIRMAKE
And in qmail-ldap.h:
# cat /usr/local/src/qmail-1.03/qmail-ldap.h |grep LDAP_HOMEDIR
#define LDAP_HOMEDIR"mailMessageStore"
Thanks and regards.
Layn.
Hi,
The 'accountStatus' attribute is missing from your user data
output. For
this account to be operational, the following attribute must be set
for
every mail user. You must include this attribute:value pair in the
base ldif
file that you create for every system user -
accountStatus: Active
The accountStatus attribute comes as a part of qmail schema. Have you
included qmail.schema directive in /etc/openldap/slapd.conf ? If
not, you
have to define the following in slapd.conf
include /etc/openldap/schema/qmail.schema
Along with that, copy the file qmail.schema to /etc/openldap/schema/
Finally, send a mail to this newly created user. I am sure it will
work.
Regards,
Amit
----- Original Message - From: "Layn" <[EMAIL PROTECTED]>
To:
Sent: Saturday, October 01, 2005 9:54 PM
Subject: Re: Automaildir.
Thansk for your faster reply, now the directory is created:
drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata
This directory is empty, no Maildir, no cur, no new, no tmp...
And the log say:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
If manually i do the Maildir directory the answer is the same:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
The anata user:
dn: uid=anata2,dc=example,dc=com
cn: anata2
sn: anata2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: anata2
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/anata2
mailMessageStore: /var/qmail/maildirs/anata2
userPassword: 123456
Regards,
Layn.
Hi Layn,
Solution is quite simple - I'll just point it out one by one
1. In your qmail-1.03 source directory, locate the file 'qmail-
ldap.h'.
2. In this file, locate the parameter 'LDAP_HOMEDIR' and change
its value
to
'mailMessageStore'
3. Now go to the qmail source directory and recompile qmail-ldap
with the
command -
make setup check
4. In the directory /var/qmail/control, make sure u have the
following
control files with the contents given along with this...
(I) ldapserver - localhost
(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com'
(III) ldappassword - 'yoursecretpassword'
(IV) ldapbasedn - 'dc=yourdomain,dc=com'
(V) ldaplocaldelivery - 1
(VI) make sure localdomains and rcpthosts contain the name of ur
domain
5. chown root:qmail /var/qmail/control/ldap*
Also make sure that your /etc/ldap.conf has enabled
authentication for
the
domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related
entries
in this file and make changes accordingly...
rootbinddn cn=Manager,dc=yourdomain,dc=com
Also uncomment the entry for password
Now, when you create a new user, qmail will automatically create the
user's
home directory, which is also the maildir of user 'watashi' (
/var/qmail/maildirs/watashi. ). So the directory 'watashi' will be
created
as a maildir and not a mailbox directory.
In case the maildir is n
Re: Automaildir.
,dc=com"
#rootpw {SSHA}4162+KLfc6cKgOg7g6Os0lnfVKk6bHa8
rootpw 1234
If a comment the rootpw directive i get the next error:
@4000433f0e7a181707c4 info msg 811843: bytes 206 from
<[EMAIL PROTECTED]> qp 6326 uid 0
@4000433f0e7a19025ddc starting delivery 207: msg 811843 to
local [EMAIL PROTECTED]
@4000433f0e7a190484a4 status: local 1/10 remote 0/20
@4000433f0e7a1a2c14b4 delivery 207: deferral:
Unable_to_login_into_LDAP_server,_bad_credentials._(#4.4.3)/
@4000433f0e7a1a2c37dc status: local 0/10 remote 0/20
So i put uncoment.
I dont think that the error is in slapd.conf, because, before
(now no) if i created user/Maildir, it run, so i thinks the server
is good, maybe a bad configuration with user definition or,
Makefile of qmail-1.03 source i dont know, in Makefile i have do:
LDAPLIBS=-L/usr/local/lib -lldap -llber -lresolv (añadir -lresolv
que no estaba).
MDIRMAKE=DAUTOMAILDIRMAKE
HDIRMAKE=DAUTOHOMEDIRMAKE
And in qmail-ldap.h:
# cat /usr/local/src/qmail-1.03/qmail-ldap.h |grep LDAP_HOMEDIR
#define LDAP_HOMEDIR"mailMessageStore"
Thanks and regards.
Layn.
Hi,
The 'accountStatus' attribute is missing from your user data
output. For
this account to be operational, the following attribute must be
set for
every mail user. You must include this attribute:value pair in the
base ldif
file that you create for every system user -
accountStatus: Active
The accountStatus attribute comes as a part of qmail schema. Have you
included qmail.schema directive in /etc/openldap/slapd.conf ? If
not, you
have to define the following in slapd.conf
include /etc/openldap/schema/qmail.schema
Along with that, copy the file qmail.schema to /etc/openldap/schema/
Finally, send a mail to this newly created user. I am sure it will
work.
Regards,
Amit
- Original Message - From: "Layn" <[EMAIL PROTECTED]>
To:
Sent: Saturday, October 01, 2005 9:54 PM
Subject: Re: Automaildir.
Thansk for your faster reply, now the directory is created:
drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata
This directory is empty, no Maildir, no cur, no new, no tmp...
And the log say:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
If manually i do the Maildir directory the answer is the same:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
The anata user:
dn: uid=anata2,dc=example,dc=com
cn: anata2
sn: anata2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: anata2
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/anata2
mailMessageStore: /var/qmail/maildirs/anata2
userPassword: 123456
Regards,
Layn.
Hi Layn,
Solution is quite simple - I'll just point it out one by one
1. In your qmail-1.03 source directory, locate the file 'qmail-
ldap.h'.
2. In this file, locate the parameter 'LDAP_HOMEDIR' and change
its value
to
'mailMessageStore'
3. Now go to the qmail source directory and recompile qmail-ldap
with the
command -
make setup check
4. In the directory /var/qmail/control, make sure u have the
following
control files with the contents given along with this...
(I) ldapserver - localhost
(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com'
(III) ldappassword - 'yoursecretpassword'
(IV) ldapbasedn - 'dc=yourdomain,dc=com'
(V) ldaplocaldelivery - 1
(VI) make sure localdomains and rcpthosts contain the name of ur
domain
5. chown root:qmail /var/qmail/control/ldap*
Also make sure that your /etc/ldap.conf has enabled
authentication for
the
domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related
entries
in this file and make changes accordingly...
rootbinddn cn=Manager,dc=yourdomain,dc=com
Also uncomment the entry for password
Now, when you create a new user, qmail will automatically create
the
user's
home directory, which is also the maildir of user 'watashi' (
/var/qmail/maildirs/watashi. ). So the directory 'watashi' will be
created
as a maildir and not a mailbox directory.
In case the maildir is not created, just send a mail to this newly
created
user 'watashi' with any demo text. qmail will then automatically
create
the
desired maildir.
Hope that helps. Good luck with your qmail-ldap installation.
Regards,
Amit
- Original Message - From: "Layn" <[EMAIL PROTECTED]>
To:
Sent: Saturday, October 01, 2005 8:49 PM
Subject: Automaildir.
I know this is a comun problem, i have read similar post in this
list and anothers, but, i cant fix this error. So please if you
have any
idea about its, please tell me.
My problem is the next:
When i send a mail to a local users (no sistem l
Re: Automaildir.
the dynamically loaded modules are stored
modulepath /usr/lib/ldap
moduleload back_ldbm
###
# Specific Backend Directives for ldbm:
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
backend ldbm
###
# Specific Directives for database #1, of type ldbm:
# Database specific directives apply to this databasse until another
# 'database' directive occurs
databaseldbm
suffix "dc=example,dc=com"
#suffix "o=example"
directory "/var/lib/ldap"
index objectClass eq
rootdn "cn=admin,dc=example,dc=com"
rootbinddn "cn=admin,dc=example,dc=com"
#rootpw {SSHA}4162+KLfc6cKgOg7g6Os0lnfVKk6bHa8
rootpw 1234
If a comment the rootpw directive i get the next error:
@4000433f0e7a181707c4 info msg 811843: bytes 206 from
<[EMAIL PROTECTED]> qp 6326 uid 0
@4000433f0e7a19025ddc starting delivery 207: msg 811843 to local
[EMAIL PROTECTED]
@4000433f0e7a190484a4 status: local 1/10 remote 0/20
@4000433f0e7a1a2c14b4 delivery 207: deferral:
Unable_to_login_into_LDAP_server,_bad_credentials._(#4.4.3)/
@4000433f0e7a1a2c37dc status: local 0/10 remote 0/20
So i put uncoment.
I dont think that the error is in slapd.conf, because, before (now
no) if i created user/Maildir, it run, so i thinks the server is good,
maybe a bad configuration with user definition or, Makefile of
qmail-1.03 source i dont know, in Makefile i have do:
LDAPLIBS=-L/usr/local/lib -lldap -llber -lresolv (añadir -lresolv que
no estaba).
MDIRMAKE=DAUTOMAILDIRMAKE
HDIRMAKE=DAUTOHOMEDIRMAKE
And in qmail-ldap.h:
# cat /usr/local/src/qmail-1.03/qmail-ldap.h |grep LDAP_HOMEDIR
#define LDAP_HOMEDIR"mailMessageStore"
Thanks and regards.
Layn.
Hi,
The 'accountStatus' attribute is missing from your user data output. For
this account to be operational, the following attribute must be set for
every mail user. You must include this attribute:value pair in the
base ldif
file that you create for every system user -
accountStatus: Active
The accountStatus attribute comes as a part of qmail schema. Have you
included qmail.schema directive in /etc/openldap/slapd.conf ? If not,
you
have to define the following in slapd.conf
include /etc/openldap/schema/qmail.schema
Along with that, copy the file qmail.schema to /etc/openldap/schema/
Finally, send a mail to this newly created user. I am sure it will work.
Regards,
Amit
- Original Message - From: "Layn" <[EMAIL PROTECTED]>
To:
Sent: Saturday, October 01, 2005 9:54 PM
Subject: Re: Automaildir.
Thansk for your faster reply, now the directory is created:
drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata
This directory is empty, no Maildir, no cur, no new, no tmp...
And the log say:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
If manually i do the Maildir directory the answer is the same:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
The anata user:
dn: uid=anata2,dc=example,dc=com
cn: anata2
sn: anata2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: anata2
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/anata2
mailMessageStore: /var/qmail/maildirs/anata2
userPassword: 123456
Regards,
Layn.
Hi Layn,
Solution is quite simple - I'll just point it out one by one
1. In your qmail-1.03 source directory, locate the file
'qmail-ldap.h'.
2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its
value
to
'mailMessageStore'
3. Now go to the qmail source directory and recompile qmail-ldap
with the
command -
make setup check
4. In the directory /var/qmail/control, make sure u have the following
control files with the contents given along with this...
(I) ldapserver - localhost
(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com'
(III) ldappassword - 'yoursecretpassword'
(IV) ldapbasedn - 'dc=yourdomain,dc=com'
(V) ldaplocaldelivery - 1
(VI) make sure localdomains and rcpthosts contain the name of ur
domain
5. chown root:qmail /var/qmail/control/ldap*
Also make sure that your /etc/ldap.conf has enabled authentication for
the
domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related
entries
in this file and make changes accordingly...
rootbinddn cn=Manager,dc=yourdomain,dc=com
Also uncomment the entry for password
Now, when you create a new user, qmail will automatically create the
user's
home directory, which is also the maildir
Re: Automaildir.
ll be created as a maildir and not a mailbox directory. In case the maildir is not created, just send a mail to this newly created user 'watashi' with any demo text. qmail will then automatically create the desired maildir. Hope that helps. Good luck with your qmail-ldap installation. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> To: mailto:qmail-ldap@qmail-ldap.org>> Sent: Saturday, October 01, 2005 8:49 PM Subject: Automaildir. I know this is a comun problem, i have read similar post in this list and anothers, but, i cant fix this error. So please if you have any idea about its, please tell me. My problem is the next: When i send a mail to a local users (no sistem local, local of my domains, defined in my ldap), i get the next error: deferral: Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4.3 .0) If i create this directory: shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 shuhi:/var/qmail# chown -R vmail:vmail maildirs shuhi:/var/qmail# ls -l maildirs/ total 4 drwx-- 2 vmail vmail 4096 2005-10-01 16:53 watashi3 The result is: deferral: Unable_to_chdir_to_maildir._(#4.2.1) It could be a problem of privilege, but if u see, the directory is of vmail:vmail, so its correct, no problem with privilege. And now i create Maildir with maildirmake: shuhi:/var/qmail# bin/maildirmake maildirs/watashi3/Maildir shuhi:/var/qmail# chown -R vmail:vmail maildirs The result is: success: did_1+0+0/ Correct!!! But no automatic. The ldap's user configuration is: dn: uid=watashi3,dc=example,dc=com cn: watashi3 sn: lin2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: watashi3 mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> mailHost: smtp.example.com mailMessageStore: /var/qmail/maildirs/watashi3 userPassword:: 123456 If i put the homeDirectory's attribute, and i create the homeDirectory, this automaty crea the mailbox, but the mailbox and i want maildir, no mailbox. Control's files of interest: defaultdelivery./Maildir/ ldapgid 2110 (vmail uid) ldapmessagestore/var/qmail/maildirs ldapobjectclass qmailUser ldaprebind1 ldapuid 11184 (vmail gid= dirmaker /var/qmail/bin/dirmaker And dirmaker's script: #!/bin/sh mkdir -m 700 -p $1 And for last, the more important, the Makefile of qmail-1.03, in this file i have uncommentd the next lines: MDIRMAKE=DAUTOMAILDIRMAKE HDIRMAKE=DAUTOHOMEDIRMAKE I hope you can help me i dont know where to read now. Thanks and regards, Layn.
Re: Automaildir.
IL PROTECTED] @4000433f0e7a190484a4 status: local 1/10 remote 0/20 @4000433f0e7a1a2c14b4 delivery 207: deferral: Unable_to_login_into_LDAP_server,_bad_credentials._(#4.4.3)/ @4000433f0e7a1a2c37dc status: local 0/10 remote 0/20 So i put uncoment. I dont think that the error is in slapd.conf, because, before (now no) if i created user/Maildir, it run, so i thinks the server is good, maybe a bad configuration with user definition or, Makefile of qmail-1.03 source i dont know, in Makefile i have do: LDAPLIBS=-L/usr/local/lib -lldap -llber -lresolv (añadir -lresolv que no estaba). MDIRMAKE=DAUTOMAILDIRMAKE HDIRMAKE=DAUTOHOMEDIRMAKE And in qmail-ldap.h: # cat /usr/local/src/qmail-1.03/qmail-ldap.h |grep LDAP_HOMEDIR #define LDAP_HOMEDIR"mailMessageStore" Thanks and regards. Layn. Hi, The 'accountStatus' attribute is missing from your user data output. For this account to be operational, the following attribute must be set for every mail user. You must include this attribute:value pair in the base ldif file that you create for every system user - accountStatus: Active The accountStatus attribute comes as a part of qmail schema. Have you included qmail.schema directive in /etc/openldap/slapd.conf ? If not, you have to define the following in slapd.conf include /etc/openldap/schema/qmail.schema Along with that, copy the file qmail.schema to /etc/openldap/schema/ Finally, send a mail to this newly created user. I am sure it will work. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Saturday, October 01, 2005 9:54 PM Subject: Re: Automaildir. Thansk for your faster reply, now the directory is created: drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata This directory is empty, no Maildir, no cur, no new, no tmp... And the log say: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) If manually i do the Maildir directory the answer is the same: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) The anata user: dn: uid=anata2,dc=example,dc=com cn: anata2 sn: anata2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: anata2 mail: [EMAIL PROTECTED] mailHost: smtp.example.com homeDirectory: /var/qmail/maildirs/anata2 mailMessageStore: /var/qmail/maildirs/anata2 userPassword: 123456 Regards, Layn. Hi Layn, Solution is quite simple - I'll just point it out one by one 1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'. 2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to 'mailMessageStore' 3. Now go to the qmail source directory and recompile qmail-ldap with the command - make setup check 4. In the directory /var/qmail/control, make sure u have the following control files with the contents given along with this... (I) ldapserver - localhost (II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com' (III) ldappassword - 'yoursecretpassword' (IV) ldapbasedn - 'dc=yourdomain,dc=com' (V) ldaplocaldelivery - 1 (VI) make sure localdomains and rcpthosts contain the name of ur domain 5. chown root:qmail /var/qmail/control/ldap* Also make sure that your /etc/ldap.conf has enabled authentication for the domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related entries in this file and make changes accordingly... rootbinddn cn=Manager,dc=yourdomain,dc=com Also uncomment the entry for password Now, when you create a new user, qmail will automatically create the user's home directory, which is also the maildir of user 'watashi' ( /var/qmail/maildirs/watashi. ). So the directory 'watashi' will be created as a maildir and not a mailbox directory. In case the maildir is not created, just send a mail to this newly created user 'watashi' with any demo text. qmail will then automatically create the desired maildir. Hope that helps. Good luck with your qmail-ldap installation. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Saturday, October 01, 2005 8:49 PM Subject: Automaildir. I know this is a comun problem, i have read similar post in this list and anothers, but, i cant fix this error. So please if you have any idea about its, please tell me. My problem is the next: When i send a mail to a local users (no sistem local, local of my domains, defined in my ldap), i get the next error: deferral: Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4. 3 .0) If i create this directory: shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 shuhi:/var/qmail# chown -R vmail:vmail maild
Re: Automaildir.
Hope this can help you:1. be sure that your Makefile on qmail after applying the patch has the following:# to enable the auto-maildir-make feature uncomment the next lineMDIRMAKE=-DAUTOMAILDIRMAKE# to enable the auto-homedir-make feature uncomment the next lineHDIRMAKE=-DAUTOHOMEDIRMAKE2. After installing qmail-ldap go to you control files normally located at /var/qmail/controlthen add this to that filecat > /var/qmail/control/dirmaker/var/qmail/bin/dirmakercreate the file /var/qmail/bin/dirmaker and put this on it: ( it may change according to your installation)#!/bin/shecho '-' >> /usr/home/qmail/dirmaker.logdate >> /usr/home/qmail/dirmaker.logecho $1 >> /usr/home/qmail/dirmaker.logid >> /usr/home/qmail/dirmaker.logmkdir -m 700 -p $1/var/qmail/bin/maildirmake $1/Maildirthat file is owned by root:qmail:% ll /var/qmail/bin/dirmaker -rwxr-xr-x 1 root qmail 264 Jun 16 11:53 dirmaker*also check the ldapmessagestore, on my case is : /usr/home/qmail/maildirs (directory owned by vmail:vmail)% ll /usr/home/qmail/-rw-r--r-- 1 vmail vmail 3562 Sep 12 23:13 dirmaker.logdrwxr-xr-x 4 vmail vmail 512 Sep 12 22:48 maildirs/3. verify the permson my case /usr/home/qmail/* is owned by vmail:vmail4. here is an example of ldif:dn: uid=[EMAIL PROTECTED],ou=ejemplo.org,ou=qmail,o=EJEMPLO,c=CAobjectClass: topobjectClass: personobjectClass: inetOrgPersonobjectClass: qmailUseruid: [EMAIL PROTECTED]cn: nbarisn: nbariaccountStatus: activemail: [EMAIL PROTECTED]mailHost: ejemplo.orgmailMessageStore: ejemplo.org/nbarideliveryMode: noprogrammailAlternateAddress: [EMAIL PROTECTED]from: http://www.glaven.org/qmail-ldap.htmldirmakerDirmaker (which we altered our makefile for) allows us to declare a script that will autocreate home directories for us upon receipt of first email on a new account. So, create an LDAP account for [EMAIL PROTECTED], with a mailbox of /mail/glaven.org/users/j/jasonpanopolous and dirmaker will automagically create the directory (and tree), set permissions, and deliver the mail there. I created /var/qmail/bin/dirmaker, and put that path in my dirmaker control file. Here is the contents of my dirmaker scriptHope this can help you.Regards.On Oct 1, 2005, at 11:24 AM, Layn wrote: Thansk for your faster reply, now the directory is created: drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata This directory is empty, no Maildir, no cur, no new, no tmp... And the log say: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) If manually i do the Maildir directory the answer is the same: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) The anata user:dn: uid=anata2,dc=example,dc=comcn: anata2sn: anata2objectClass: personobjectClass: topobjectClass: inetOrgPersonobjectClass: qmailUsero: exampleuid: anata2mail: [EMAIL PROTECTED]mailHost: smtp.example.comhomeDirectory: /var/qmail/maildirs/anata2mailMessageStore: /var/qmail/maildirs/anata2userPassword: 123456 Regards, Layn. Hi Layn,Solution is quite simple - I'll just point it out one by one1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'.2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to'mailMessageStore'3. Now go to the qmail source directory and recompile qmail-ldap with thecommand -make setup check4. In the directory /var/qmail/control, make sure u have the followingcontrol files with the contents given along with this...(I) ldapserver - localhost(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com'(III) ldappassword - 'yoursecretpassword'(IV) ldapbasedn - 'dc=yourdomain,dc=com'(V) ldaplocaldelivery - 1(VI) make sure localdomains and rcpthosts contain the name of ur domain5. chown root:qmail /var/qmail/control/ldap*Also make sure that your /etc/ldap.conf has enabled authentication for thedomain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related entriesin this file and make changes accordingly...rootbinddn cn=Manager,dc=yourdomain,dc=comAlso uncomment the entry for passwordNow, when you create a new user, qmail will automatically create the user'shome directory, which is also the maildir of user 'watashi' (/var/qmail/maildirs/watashi. ). So the directory 'watashi' will be createdas a maildir and not a mailbox directory.In case the maildir is not created, just send a mail to this newly createduser 'watashi' with any demo text. qmail will then automatically create thedesired maildir.Hope that helps. Good luck with your qmail-ldap installation.Regards,Amit- Original Message - From: "Layn" <[EMAIL PROTECTED]>To: <qmail-ldap@qmail-ldap.org>Sent: Saturday, October 01, 2005 8:49 PMSubject: Automaildir. I know this is a comun problem, i have read similar post in thislist and anothers, but, i cant fix this error. So please
Re: Automaildir.
Hi, The 'accountStatus' attribute is missing from your user data output. For this account to be operational, the following attribute must be set for every mail user. You must include this attribute:value pair in the base ldif file that you create for every system user - accountStatus: Active The accountStatus attribute comes as a part of qmail schema. Have you included qmail.schema directive in /etc/openldap/slapd.conf ? If not, you have to define the following in slapd.conf include /etc/openldap/schema/qmail.schema Along with that, copy the file qmail.schema to /etc/openldap/schema/ Finally, send a mail to this newly created user. I am sure it will work. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Saturday, October 01, 2005 9:54 PM Subject: Re: Automaildir. > Thansk for your faster reply, now the directory is created: > > drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata > > This directory is empty, no Maildir, no cur, no new, no tmp... > > And the log say: > > deferral: > Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) > > If manually i do the Maildir directory the answer is the same: > > deferral: > Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) > > > The anata user: > > dn: uid=anata2,dc=example,dc=com > cn: anata2 > sn: anata2 > objectClass: person > objectClass: top > objectClass: inetOrgPerson > objectClass: qmailUser > o: example > uid: anata2 > mail: [EMAIL PROTECTED] > mailHost: smtp.example.com > homeDirectory: /var/qmail/maildirs/anata2 > mailMessageStore: /var/qmail/maildirs/anata2 > userPassword: 123456 > > Regards, > Layn. > > >Hi Layn, > > > >Solution is quite simple - I'll just point it out one by one > > > >1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'. > >2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to > >'mailMessageStore' > >3. Now go to the qmail source directory and recompile qmail-ldap with the > >command - > >make setup check > >4. In the directory /var/qmail/control, make sure u have the following > >control files with the contents given along with this... > > > >(I) ldapserver - localhost > >(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com' > >(III) ldappassword - 'yoursecretpassword' > >(IV) ldapbasedn - 'dc=yourdomain,dc=com' > >(V) ldaplocaldelivery - 1 > >(VI) make sure localdomains and rcpthosts contain the name of ur domain > > > >5. chown root:qmail /var/qmail/control/ldap* > > > >Also make sure that your /etc/ldap.conf has enabled authentication for the > >domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related entries > >in this file and make changes accordingly... > > > >rootbinddn cn=Manager,dc=yourdomain,dc=com > >Also uncomment the entry for password > > > >Now, when you create a new user, qmail will automatically create the user's > >home directory, which is also the maildir of user 'watashi' ( > >/var/qmail/maildirs/watashi. ). So the directory 'watashi' will be created > >as a maildir and not a mailbox directory. > > > >In case the maildir is not created, just send a mail to this newly created > >user 'watashi' with any demo text. qmail will then automatically create the > >desired maildir. > > > >Hope that helps. Good luck with your qmail-ldap installation. > > > >Regards, > > > >Amit > > > >- Original Message - > >From: "Layn" <[EMAIL PROTECTED]> > >To: > >Sent: Saturday, October 01, 2005 8:49 PM > >Subject: Automaildir. > > > > > > > > > >>I know this is a comun problem, i have read similar post in this > >>list and anothers, but, i cant fix this error. So please if you have any > >>idea about its, please tell me. > >> > >>My problem is the next: > >> > >>When i send a mail to a local users (no sistem local, local of my > >>domains, defined in my ldap), i get the next error: > >> > >>deferral: > >> > >> > >> > >Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4. 3 > >.0) > > > > > >>If i create this directory: > >> > >> shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 > >> shuhi:/var/qmail# chown -R vmail:vmail maildirs > >> shuhi:/var/qma
Re: Automaildir.
Thansk for your faster reply, now the directory is created: drwx-- 3 vmail vmail 4096 2005-10-01 18:20 anata This directory is empty, no Maildir, no cur, no new, no tmp... And the log say: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) If manually i do the Maildir directory the answer is the same: deferral: Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1) The anata user: dn: uid=anata2,dc=example,dc=com cn: anata2 sn: anata2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: anata2 mail: [EMAIL PROTECTED] mailHost: smtp.example.com homeDirectory: /var/qmail/maildirs/anata2 mailMessageStore: /var/qmail/maildirs/anata2 userPassword: 123456 Regards, Layn. Hi Layn, Solution is quite simple - I'll just point it out one by one 1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'. 2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to 'mailMessageStore' 3. Now go to the qmail source directory and recompile qmail-ldap with the command - make setup check 4. In the directory /var/qmail/control, make sure u have the following control files with the contents given along with this... (I) ldapserver - localhost (II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com' (III) ldappassword - 'yoursecretpassword' (IV) ldapbasedn - 'dc=yourdomain,dc=com' (V) ldaplocaldelivery - 1 (VI) make sure localdomains and rcpthosts contain the name of ur domain 5. chown root:qmail /var/qmail/control/ldap* Also make sure that your /etc/ldap.conf has enabled authentication for the domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related entries in this file and make changes accordingly... rootbinddn cn=Manager,dc=yourdomain,dc=com Also uncomment the entry for password Now, when you create a new user, qmail will automatically create the user's home directory, which is also the maildir of user 'watashi' ( /var/qmail/maildirs/watashi. ). So the directory 'watashi' will be created as a maildir and not a mailbox directory. In case the maildir is not created, just send a mail to this newly created user 'watashi' with any demo text. qmail will then automatically create the desired maildir. Hope that helps. Good luck with your qmail-ldap installation. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Saturday, October 01, 2005 8:49 PM Subject: Automaildir. I know this is a comun problem, i have read similar post in this list and anothers, but, i cant fix this error. So please if you have any idea about its, please tell me. My problem is the next: When i send a mail to a local users (no sistem local, local of my domains, defined in my ldap), i get the next error: deferral: Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4.3 .0) If i create this directory: shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 shuhi:/var/qmail# chown -R vmail:vmail maildirs shuhi:/var/qmail# ls -l maildirs/ total 4 drwx-- 2 vmail vmail 4096 2005-10-01 16:53 watashi3 The result is: deferral: Unable_to_chdir_to_maildir._(#4.2.1) It could be a problem of privilege, but if u see, the directory is of vmail:vmail, so its correct, no problem with privilege. And now i create Maildir with maildirmake: shuhi:/var/qmail# bin/maildirmake maildirs/watashi3/Maildir shuhi:/var/qmail# chown -R vmail:vmail maildirs The result is: success: did_1+0+0/ Correct!!! But no automatic. The ldap's user configuration is: dn: uid=watashi3,dc=example,dc=com cn: watashi3 sn: lin2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: watashi3 mail: [EMAIL PROTECTED] mailHost: smtp.example.com mailMessageStore: /var/qmail/maildirs/watashi3 userPassword:: 123456 If i put the homeDirectory's attribute, and i create the homeDirectory, this automaty crea the mailbox, but the mailbox and i want maildir, no mailbox. Control's files of interest: defaultdelivery./Maildir/ ldapgid 2110 (vmail uid) ldapmessagestore/var/qmail/maildirs ldapobjectclass qmailUser ldaprebind1 ldapuid 11184 (vmail gid= dirmaker /var/qmail/bin/dirmaker And dirmaker's script: #!/bin/sh mkdir -m 700 -p $1 And for last, the more important, the Makefile of qmail-1.03, in this file i have uncommentd the next lines: MDIRMAKE=DAUTOMAILDIRMAKE HDIRMAKE=DAUTOHOMEDIRMAKE I hope you can help me i dont know where to read now. Thanks and regards, Layn.
Re: Automaildir.
Hi Layn, Solution is quite simple - I'll just point it out one by one 1. In your qmail-1.03 source directory, locate the file 'qmail-ldap.h'. 2. In this file, locate the parameter 'LDAP_HOMEDIR' and change its value to 'mailMessageStore' 3. Now go to the qmail source directory and recompile qmail-ldap with the command - make setup check 4. In the directory /var/qmail/control, make sure u have the following control files with the contents given along with this... (I) ldapserver - localhost (II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com' (III) ldappassword - 'yoursecretpassword' (IV) ldapbasedn - 'dc=yourdomain,dc=com' (V) ldaplocaldelivery - 1 (VI) make sure localdomains and rcpthosts contain the name of ur domain 5. chown root:qmail /var/qmail/control/ldap* Also make sure that your /etc/ldap.conf has enabled authentication for the domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related entries in this file and make changes accordingly... rootbinddn cn=Manager,dc=yourdomain,dc=com Also uncomment the entry for password Now, when you create a new user, qmail will automatically create the user's home directory, which is also the maildir of user 'watashi' ( /var/qmail/maildirs/watashi. ). So the directory 'watashi' will be created as a maildir and not a mailbox directory. In case the maildir is not created, just send a mail to this newly created user 'watashi' with any demo text. qmail will then automatically create the desired maildir. Hope that helps. Good luck with your qmail-ldap installation. Regards, Amit - Original Message - From: "Layn" <[EMAIL PROTECTED]> To: Sent: Saturday, October 01, 2005 8:49 PM Subject: Automaildir. > I know this is a comun problem, i have read similar post in this > list and anothers, but, i cant fix this error. So please if you have any > idea about its, please tell me. > > My problem is the next: > > When i send a mail to a local users (no sistem local, local of my > domains, defined in my ldap), i get the next error: > > deferral: > Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4.3 .0) > > > If i create this directory: > >shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 >shuhi:/var/qmail# chown -R vmail:vmail maildirs >shuhi:/var/qmail# ls -l maildirs/ >total 4 >drwx-- 2 vmail vmail 4096 2005-10-01 16:53 watashi3 > > The result is: > > deferral: Unable_to_chdir_to_maildir._(#4.2.1) > > It could be a problem of privilege, but if u see, the directory is > of vmail:vmail, so its correct, no problem with privilege. > And now i create Maildir with maildirmake: > > shuhi:/var/qmail# bin/maildirmake maildirs/watashi3/Maildir > shuhi:/var/qmail# chown -R vmail:vmail maildirs > > The result is: > > success: did_1+0+0/ > > Correct!!! But no automatic. > > The ldap's user configuration is: > > dn: uid=watashi3,dc=example,dc=com > cn: watashi3 > sn: lin2 > objectClass: person > objectClass: top > objectClass: inetOrgPerson > objectClass: qmailUser > o: example > uid: watashi3 > mail: [EMAIL PROTECTED] > mailHost: smtp.example.com > mailMessageStore: /var/qmail/maildirs/watashi3 > userPassword:: 123456 > > If i put the homeDirectory's attribute, and i create the homeDirectory, > this automaty crea the mailbox, but the mailbox and i want maildir, no > mailbox. > > Control's files of interest: > > defaultdelivery./Maildir/ > ldapgid 2110 (vmail uid) > ldapmessagestore/var/qmail/maildirs > ldapobjectclass qmailUser > ldaprebind1 > ldapuid 11184 (vmail gid= > dirmaker /var/qmail/bin/dirmaker > > And dirmaker's script: > > #!/bin/sh > mkdir -m 700 -p $1 > > And for last, the more important, the Makefile of qmail-1.03, in this > file i have uncommentd the next lines: > >MDIRMAKE=DAUTOMAILDIRMAKE >HDIRMAKE=DAUTOHOMEDIRMAKE > > > I hope you can help me i dont know where to read now. > > Thanks and regards, > Layn.
Automaildir.
I know this is a comun problem, i have read similar post in this list and anothers, but, i cant fix this error. So please if you have any idea about its, please tell me. My problem is the next: When i send a mail to a local users (no sistem local, local of my domains, defined in my ldap), i get the next error: deferral: Unable_to_switch_to_/var/qmail/maildirs/watashi3:_file_does_not_exist._(#4.3.0) If i create this directory: shuhi:/var/qmail# bin/dirmaker maildirs/watashi3 shuhi:/var/qmail# chown -R vmail:vmail maildirs shuhi:/var/qmail# ls -l maildirs/ total 4 drwx-- 2 vmail vmail 4096 2005-10-01 16:53 watashi3 The result is: deferral: Unable_to_chdir_to_maildir._(#4.2.1) It could be a problem of privilege, but if u see, the directory is of vmail:vmail, so its correct, no problem with privilege. And now i create Maildir with maildirmake: shuhi:/var/qmail# bin/maildirmake maildirs/watashi3/Maildir shuhi:/var/qmail# chown -R vmail:vmail maildirs The result is: success: did_1+0+0/ Correct!!! But no automatic. The ldap's user configuration is: dn: uid=watashi3,dc=example,dc=com cn: watashi3 sn: lin2 objectClass: person objectClass: top objectClass: inetOrgPerson objectClass: qmailUser o: example uid: watashi3 mail: [EMAIL PROTECTED] mailHost: smtp.example.com mailMessageStore: /var/qmail/maildirs/watashi3 userPassword:: 123456 If i put the homeDirectory's attribute, and i create the homeDirectory, this automaty crea the mailbox, but the mailbox and i want maildir, no mailbox. Control's files of interest: defaultdelivery./Maildir/ ldapgid 2110 (vmail uid) ldapmessagestore/var/qmail/maildirs ldapobjectclass qmailUser ldaprebind1 ldapuid 11184 (vmail gid= dirmaker /var/qmail/bin/dirmaker And dirmaker's script: #!/bin/sh mkdir -m 700 -p $1 And for last, the more important, the Makefile of qmail-1.03, in this file i have uncommentd the next lines: MDIRMAKE=DAUTOMAILDIRMAKE HDIRMAKE=DAUTOHOMEDIRMAKE I hope you can help me i dont know where to read now. Thanks and regards, Layn.
