Re: [qmailtoaster] Exim 4.43 to qmailtoaster migration

[kishore chowdary]

Hi Eric

ur idea sound's good.can u please explain me step by step on how to do 
this.if so will i be able to move all the old inbox data to my new email 
server apart from the new mail's using farwarding.


Thanx  & Regards
Kishore Chowdary



From: Eric Webster <[EMAIL PROTECTED]>
Reply-To: qmailtoaster-list@qmailtoaster.com
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Exim 4.43 to qmailtoaster migration
Date: Thu, 9 Feb 2006 16:50:07 -0500

I was also using a CPanel solution before moving to qmail toaster.
What we did in a nutshell was made a fake domain, such as
newmail.yourdomain.com, and then made new accounts for everyone on the
new qmail server. This server had the same domain set up on it,
mail.yourdomain.com but also had the fake one as a virtual/alias. You
then gradually move everyone to it by putting forwarders in cpanel so
that all addresses are removed and replaced with forwarders
[EMAIL PROTECTED] -> [EMAIL PROTECTED]

When everyone is moved, updated DNS and let the changes propogate on the 
net.


I hope this helps.

On 2/9/06, kishore chowdary <[EMAIL PROTECTED]> wrote:
> hi guys
>
> finally i installed qmialtoaster on my hp server for the first time 
without

> messing up anything.i did not change any thing in the
> current-install-script.just fired it eveything worked fine.now i want to
> migrate my old server to my new server.
>upon close inspection i found
> that cpanel use's exim4.3.now i want to know if there is a way to 
migrate

> all the domains hosted to my new mail server.
>
> Thanx & regards
> Kishore Chowdary
>
>
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Exim 4.43 to qmailtoaster migration

[Eric Webster]

I was also using a CPanel solution before moving to qmail toaster.
What we did in a nutshell was made a fake domain, such as
newmail.yourdomain.com, and then made new accounts for everyone on the
new qmail server. This server had the same domain set up on it,
mail.yourdomain.com but also had the fake one as a virtual/alias. You
then gradually move everyone to it by putting forwarders in cpanel so
that all addresses are removed and replaced with forwarders
[EMAIL PROTECTED] -> [EMAIL PROTECTED]

When everyone is moved, updated DNS and let the changes propogate on the net.

I hope this helps.

On 2/9/06, kishore chowdary <[EMAIL PROTECTED]> wrote:
> hi guys
>
> finally i installed qmialtoaster on my hp server for the first time without
> messing up anything.i did not change any thing in the
> current-install-script.just fired it eveything worked fine.now i want to
> migrate my old server to my new server.
>upon close inspection i found
> that cpanel use's exim4.3.now i want to know if there is a way to migrate
> all the domains hosted to my new mail server.
>
> Thanx & regards
> Kishore Chowdary
>
>
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Nick Hemmesch]

Hi,

I will change the website, Erwin's package is indeed Warlord. I have no
idea how I got Warlock on the web page. And, had it there for over a year
and not noticed it.

My apology. I will get it corrected this evening.

Regards,

Nick

> I've used the tai64nlocal to read the logs, and it definately isn't
> attachment size for two reasons, there is not an attachment in these
> mails and I have databytes set to 0 =)
>
> I gave up for the day and will have at it some more tomorrow.
> Sometimes you just need to take a break...
>
> On 2/8/06, Jake Vickers <[EMAIL PROTECTED]> wrote:
>> Eric Webster wrote:
>>
>> >I am looking through the documentation for Warlock and I have added a
>> >separate entry in tcp.smtp for this machine by IP, that does not
>> >include the badmimetypes or badloadertypes directives. Still having
>> >the same problem. Am I at least on the right track?
>> >
>> >
>> Sounds like you're on the right track. You will be able to see if clam
>> is catching the messages in /var/log/qmail/clamd/current . It only
>> references the inode numbers, but ti will at least tell you if it's clam
>> grabbing the messages.
>> In the off-chance it's spamassassin, you'll see it (with more detail)
>> logged in /var/log/qmail/spamd/current
>> Not sure how savvy you are with the logs, but this will put the clam log
>> in human-readable format:
>> tail /var/log/qmail/clamd/current | tai64nlocal
>> Otherwise you have to read it in the extended-time format.
>> If you see something in the logs where it's being block, send it our
>> way.
>> Now that I think about it If you leave this line out for your IP:
>> QMAILQUEUE="/var/qmail/bin/simscan"
>>
>> I don't think it will scan for virii either In which case it might
>> be something else. Too large of an attachment?



-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] Exim 4.43 to qmailtoaster migration

[Erik Espinoza]

Not sure you will find a lot of exim experts in a qmail list. The real
question is can you produce a list of domains, users per domain and
clear text passwords for all of your users?

If so, the migration can be childs play with the use of
vaddomain/vadduser and the command line tools. If not, then you will
have to manually migrate each user manually.

Erik

On 2/9/06, kishore chowdary <[EMAIL PROTECTED]> wrote:
> hi guys
>
> finally i installed qmialtoaster on my hp server for the first time without
> messing up anything.i did not change any thing in the
> current-install-script.just fired it eveything worked fine.now i want to
> migrate my old server to my new server.
>upon close inspection i found
> that cpanel use's exim4.3.now i want to know if there is a way to migrate
> all the domains hosted to my new mail server.
>
> Thanx & regards
> Kishore Chowdary
>
>
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

[qmailtoaster] Exim 4.43 to qmailtoaster migration

[kishore chowdary]

hi guys

finally i installed qmialtoaster on my hp server for the first time without 
messing up anything.i did not change any thing in the 
current-install-script.just fired it eveything worked fine.now i want to 
migrate my old server to my new server.
  upon close inspection i found 
that cpanel use's exim4.3.now i want to know if there is a way to migrate 
all the domains hosted to my new mail server.


Thanx & regards
Kishore Chowdary



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] hp server x86

[Warren]

It does not matter that the server supports 64-bit.  Since you are
running the 32-bit version of Centos, the processor will never be in
64-bot mode.  Install it just the same way that you would for a 32-bit
processor.  Nothing special is needed.

W

kishore chowdary wrote:
> hi Cadier
>
> i did not get u.u mean u installed centos 4.2 32 bit os on a HP DL 380
> which supports 64 bit also.
> what did u set in the current-install-script.sh for set DISTRO=cnt40
> and ARCH=i386
>
> by the way i am not installing 64 bit edition i am trying it on 32 bit
> centos
>
> Thanx & Regards
> Kishore Chowdary
>
>> From: Thijs Cadier <[EMAIL PROTECTED]>
>> Reply-To: qmailtoaster-list@qmailtoaster.com
>> To: qmailtoaster-list@qmailtoaster.com
>> Subject: Re: [qmailtoaster] hp server x86
>> Date: Thu, 9 Feb 2006 18:50:56 +0100
>>
>> Hello,
>>
>> I did the same thing and got everything working in the end, after a 
>> few questions on this list. It might be a good idea to read through 
>> the thread:
>>
>> http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/
>> msg02119.html
>>
>>
>>
>>
>> On 9-feb-2006, at 18:48, kishore chowdary wrote:
>>
>>> hi
>>>
>>> I am trying to install Qmailtoaster on Hp DL 380 server(dual Xeon 
>>> Processor) using 32 bit centos 4.2.in current-install-script.sh 
>>> what these two things should be set to coz my server supports 64 
>>> bit but i am using 32 bit centos
>>>
>>> set DISTRO=cnt40 and ARCH=i386
>>>
>>> Thanx & Regards
>>> Kishore Chowdary
>>>
>>>
>>>
>>> -
>>> QmailToaster hosted by: VR Hosted 
>>> -
>>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>>> For additional commands, e-mail: qmailtoaster-list-
>>> [EMAIL PROTECTED]
>>>
>>
>>
>> -
>> QmailToaster hosted by: VR Hosted 
>> -
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>
>
>
> -
> QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>


-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] hp server x86

[kishore chowdary]

hi Cadier

i did not get u.u mean u installed centos 4.2 32 bit os on a HP DL 380 which 
supports 64 bit also.
what did u set in the current-install-script.sh for set DISTRO=cnt40 and 
ARCH=i386


by the way i am not installing 64 bit edition i am trying it on 32 bit 
centos


Thanx & Regards
Kishore Chowdary


From: Thijs Cadier <[EMAIL PROTECTED]>
Reply-To: qmailtoaster-list@qmailtoaster.com
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] hp server x86
Date: Thu, 9 Feb 2006 18:50:56 +0100

Hello,

I did the same thing and got everything working in the end, after a  few 
questions on this list. It might be a good idea to read through  the 
thread:


http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/ 
msg02119.html





On 9-feb-2006, at 18:48, kishore chowdary wrote:


hi

I am trying to install Qmailtoaster on Hp DL 380 server(dual Xeon  
Processor) using 32 bit centos 4.2.in current-install-script.sh  what 
these two things should be set to coz my server supports 64  bit but i am 
using 32 bit centos


set DISTRO=cnt40 and ARCH=i386

Thanx & Regards
Kishore Chowdary



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: qmailtoaster-list- [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] hp server x86

[Thijs Cadier]

Hello,

I did the same thing and got everything working in the end, after a  
few questions on this list. It might be a good idea to read through  
the thread:


http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/ 
msg02119.html





On 9-feb-2006, at 18:48, kishore chowdary wrote:


hi

I am trying to install Qmailtoaster on Hp DL 380 server(dual Xeon  
Processor) using 32 bit centos 4.2.in current-install-script.sh  
what these two things should be set to coz my server supports 64  
bit but i am using 32 bit centos


set DISTRO=cnt40 and ARCH=i386

Thanx & Regards
Kishore Chowdary



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: qmailtoaster-list- 
[EMAIL PROTECTED]





-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

[qmailtoaster] hp server x86

[kishore chowdary]

hi

I am trying to install Qmailtoaster on Hp DL 380 server(dual Xeon Processor) 
using 32 bit centos 4.2.in current-install-script.sh what these two things 
should be set to coz my server supports 64 bit but i am using 32 bit centos


set DISTRO=cnt40 and ARCH=i386

Thanx & Regards
Kishore Chowdary



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Jake Vickers]

Eric Webster wrote:


You have been a great help Jake, but I tried using the whitelist_from
and the whitelist_from_rcvd directives in the local.cf and I still
have the same problem.

Is there anything I can do to just say if source IP = X, pass indefinately?
 


You basically did that when you set up:
192.168.2.3:allow,RELAYCLIENT=""
Which with the error you're getting leads me to believe that it may be a 
CR/LF issue. I vaguely remember someone else having problems with a 
program they were using that sent emails that was using CRs instead of 
LFs (might be the other way around) and that's why their server was 
kicking the messages.


-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Eric Webster]

You have been a great help Jake, but I tried using the whitelist_from
and the whitelist_from_rcvd directives in the local.cf and I still
have the same problem.

Is there anything I can do to just say if source IP = X, pass indefinately?

On 2/9/06, Jake Vickers <[EMAIL PROTECTED]> wrote:
> Eric Webster wrote:
>
> >Yes I did issues a qmailctl cdb and then qmailctl restart after this.
> >
> >I don't see anything in the logs about it being blocked, I can only
> >assume it is for some reason. The most likely cause is a 554 error.
> >There are no attachments, just text. These are just messages from our
> >phone system saying "You missed a call, you have new voice mail."
> >
> >So here is what happens, someone calls and the call goes to voice
> >mail. Our phone system sends an email saying "You missed a call, from
> >#, length: XXX seconds."
> >
> >It tries 5 times, and then an email is sent to a second address saying
> >the mail failed. I get the failure message which contains:
> >
> > Failed to send email.  subject: "Msg: 6143326618 - 7 sec. for x196";
> >to: "RECIPIENTSADDRESS";  The message could not be sent to the SMTP
> >server. The transport error code was . The server response was ; 5
> >failed retry attempts"
> >
> >Is there a way to allow any and all email from a particular IP to go through?
> >
> >
> Okay, this makes more sense. I did something similar with our Nortel
> system (instead of buying Nortel's expensive setup). Mine was being
> blocked as SPAM, though. I think what is happening is that the message
> is coming in in an invalid format, so it's being bounced. Probably a
> CR/LF thing. The 554 error is usually a SMTP error.
> For my situation, I only had to add a:
> whitelist_from [EMAIL PROTECTED]
> to my /etc/mail/spamassassin/local.cf file for it to stop rejecting the
> messages as spam.  Your situation may even be that you're trying to send
> emails without authenticating the SMTP connection. Hopefully some of
> that might point you in the right direction.
>
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Jake Vickers]

Eric Webster wrote:


Yes I did issues a qmailctl cdb and then qmailctl restart after this.

I don't see anything in the logs about it being blocked, I can only
assume it is for some reason. The most likely cause is a 554 error.
There are no attachments, just text. These are just messages from our
phone system saying "You missed a call, you have new voice mail."

So here is what happens, someone calls and the call goes to voice
mail. Our phone system sends an email saying "You missed a call, from
#, length: XXX seconds."

It tries 5 times, and then an email is sent to a second address saying
the mail failed. I get the failure message which contains:

Failed to send email.  subject: "Msg: 6143326618 - 7 sec. for x196"; 
to: "RECIPIENTSADDRESS";  The message could not be sent to the SMTP

server. The transport error code was . The server response was ; 5
failed retry attempts"

Is there a way to allow any and all email from a particular IP to go through?
 

Okay, this makes more sense. I did something similar with our Nortel 
system (instead of buying Nortel's expensive setup). Mine was being 
blocked as SPAM, though. I think what is happening is that the message 
is coming in in an invalid format, so it's being bounced. Probably a 
CR/LF thing. The 554 error is usually a SMTP error.

For my situation, I only had to add a:
whitelist_from [EMAIL PROTECTED]
to my /etc/mail/spamassassin/local.cf file for it to stop rejecting the 
messages as spam.  Your situation may even be that you're trying to send 
emails without authenticating the SMTP connection. Hopefully some of 
that might point you in the right direction.



-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Eric Webster]

Yes I did issues a qmailctl cdb and then qmailctl restart after this.

I don't see anything in the logs about it being blocked, I can only
assume it is for some reason. The most likely cause is a 554 error.
There are no attachments, just text. These are just messages from our
phone system saying "You missed a call, you have new voice mail."

grep SENDINADDRESS current | tai64nlocal
2006-02-09 09:51:54.693385500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:52:24.896764500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:52:55.066074500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:53:25.249256500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:53:55.526771500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:54:25.698612500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient
2006-02-09 09:54:25.866354500 CHKUSER accepted rcpt: from
 remote
 rcpt  : found
existing recipient


So here is what happens, someone calls and the call goes to voice
mail. Our phone system sends an email saying "You missed a call, from
#, length: XXX seconds."

It tries 5 times, and then an email is sent to a second address saying
the mail failed. I get the failure message which contains:

 Failed to send email.  subject: "Msg: 6143326618 - 7 sec. for x196"; 
to: "RECIPIENTSADDRESS";  The message could not be sent to the SMTP
server. The transport error code was . The server response was ; 5
failed retry attempts"

Is there a way to allow any and all email from a particular IP to go through?


On 2/9/06, Jake Vickers <[EMAIL PROTECTED]> wrote:
> Eric Webster wrote:
>
> >I tried just this:
> >
> >$IP:allow,RELAYCLIENT=""
> >
> >Same problem. I am officially out of ideas now. I would think that
> >would let anything through from the IP specified. I also tried it
> >above and below the line for our internal subnet.
> >
> >
> And when you added/changed that line you rebuilt the cdb, right? I have
> to ask
> Pieces of your log where the file is being blocked, and maybe a
> description of the file (ZIP file, RAR file with a MP3 in it, etc.)
> would be helpful.
> Remind me if I forgot... Is this a mailer program that is sending stuff
> out and it's being blocked by your Toaster server (not being returned by
> someone else's server), right?
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Jake Vickers]

Eric Webster wrote:


I tried just this:

$IP:allow,RELAYCLIENT=""

Same problem. I am officially out of ideas now. I would think that
would let anything through from the IP specified. I also tried it
above and below the line for our internal subnet.
 

And when you added/changed that line you rebuilt the cdb, right? I have 
to ask
Pieces of your log where the file is being blocked, and maybe a 
description of the file (ZIP file, RAR file with a MP3 in it, etc.) 
would be helpful.
Remind me if I forgot... Is this a mailer program that is sending stuff 
out and it's being blocked by your Toaster server (not being returned by 
someone else's server), right?


-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] ClamAV blocking good email

[Eric Webster]

I tried just this:

$IP:allow,RELAYCLIENT=""

Same problem. I am officially out of ideas now. I would think that
would let anything through from the IP specified. I also tried it
above and below the line for our internal subnet.

On 2/8/06, Eric Webster <[EMAIL PROTECTED]> wrote:
> I've used the tai64nlocal to read the logs, and it definately isn't
> attachment size for two reasons, there is not an attachment in these
> mails and I have databytes set to 0 =)
>
> I gave up for the day and will have at it some more tomorrow.
> Sometimes you just need to take a break...
>
> On 2/8/06, Jake Vickers <[EMAIL PROTECTED]> wrote:
> > Eric Webster wrote:
> >
> > >I am looking through the documentation for Warlock and I have added a
> > >separate entry in tcp.smtp for this machine by IP, that does not
> > >include the badmimetypes or badloadertypes directives. Still having
> > >the same problem. Am I at least on the right track?
> > >
> > >
> > Sounds like you're on the right track. You will be able to see if clam
> > is catching the messages in /var/log/qmail/clamd/current . It only
> > references the inode numbers, but ti will at least tell you if it's clam
> > grabbing the messages.
> > In the off-chance it's spamassassin, you'll see it (with more detail)
> > logged in /var/log/qmail/spamd/current
> > Not sure how savvy you are with the logs, but this will put the clam log
> > in human-readable format:
> > tail /var/log/qmail/clamd/current | tai64nlocal
> > Otherwise you have to read it in the extended-time format.
> > If you see something in the logs where it's being block, send it our way.
> > Now that I think about it If you leave this line out for your IP:
> > QMAILQUEUE="/var/qmail/bin/simscan"
> >
> > I don't think it will scan for virii either In which case it might
> > be something else. Too large of an attachment?
> >
> > -
> >  QmailToaster hosted by: VR Hosted 
> > -
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

[qmailtoaster] Re: Disabling CHKUSER via tcprules

[Natalio Gatti]

Analyzing chkuser docs, I found the following variable that can be defined in tcprules:
 
"SENDER_NOCHECK : This define enable usage of a variable excluding any check on the sender. The variable should be set in tcp.smtp for known clients, with static IP, whose mailer is composing bad sender addresses"

 
This seems to be what i was looking for. I´ll try and tell
 
Natalio 
On 2/9/06, Natalio Gatti <[EMAIL PROTECTED]> wrote:

I´m having some users complainig about the new chkuser patch. 
They are having the following problem:
They send mails to 50/60 accounts, some of them are local, and some not. When the mistype some local address, the complete mail is rejected, without sending to the others accounts.
Is there any way to disable chkuser for some IPs? Could that be done via tcprules?
 
Salutti
 
Natalio

[qmailtoaster] Disabling CHKUSER via tcprules

[Natalio Gatti]

I´m having some users complainig about the new chkuser patch. 
They are having the following problem:
They send mails to 50/60 accounts, some of them are local, and some not. When the mistype some local address, the complete mail is rejected, without sending to the others accounts.
Is there any way to disable chkuser for some IPs? Could that be done via tcprules?
 
Salutti
 
Natalio

[qmailtoaster] add virtual

[iant]

hai

I had a problem, when i want to create  virtual domain and add user thru 
admin-toaster  it's always  error 



 Server error!

The server encountered an internal error and was unable to complete your 
request.


Error message:
Premature end of script headers: toaster.vqadmin


rgds
iant

ps:
my subscribe is ok now , thanks

-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

[qmailtoaster] virtual domain

[iant]

hi

when I trying to add virtual domain , always errors like this

[EMAIL PROTECTED] /]# /home/vpopmail/bin/vadddomain multindo.com
Please enter password for postmaster:
enter password again:
Failure while attempting to remove_line() the locals file
Error. Failed to add domain to assign file
Error: Could not update file

rgds
iant

-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] SPF lookup failure

[Erik Espinoza]

$ host -t txt multindo.co.id
multindo.co.id text "Multindo Auto Finance"

The text record that the dns admin of 'multindo.co.id' set is being
misinterpreted for a bad spf record. Your best bet would be to either
go to http://spf.pobox.com/ and run thru the wizard to fix the text
record, or removing the text record entirely.

As the text record in DNS is used by more and more mail servers to
define spf parameters, you will find a growing population of mail
servers that you will not be able to communicate with.

Thanks,
Erik


On 2/8/06, iant <[EMAIL PROTECTED]> wrote:
> hi all
>
> i want to subscribe qmailtoaster with new email , but my email was
> deferred , i'm using qmailtoaster with postfix as server smtp...why ?,
>
>
> Feb  9 13:56:01 smtp postfix/cleanup[9366]: B47542801C:
> message-id=<[EMAIL PROTECTED]>
> Feb  9 13:56:01 smtp postfix/qmgr[5672]: B47542801C:
> from=<[EMAIL PROTECTED]>, size=1520, nrcpt=1 (queue active)
> Feb  9 13:56:01 smtp clamsmtpd: 100080: [EMAIL PROTECTED],
> [EMAIL PROTECTED], status=CLEAN
> Feb  9 13:56:01 smtp postfix/smtp[9367]: 9F89A28015:
> to=<[EMAIL PROTECTED]>,
> relay=x.x.x.x[x.x.x.x], delay=0, status=sent (250 Ok: queued as B47542801C)
> Feb  9 13:56:01 smtp postfix/qmgr[5672]: 9F89A28015: removed
> Feb  9 13:56:01 smtp postfix/smtpd[9369]: disconnect from
> smtp.multindo.co.id[x.x.x.x]
> Feb  9 13:56:55 smtp postfix/smtp[9371]: B47542801C:
> to=<[EMAIL PROTECTED]>,
> relay=qmailtoaster.com[38.99.66.144], delay=54, status=deferred (host
> qmailtoaster.com[38.99.66.144] said: 451 SPF lookup failure (#4.3.0) (in
> reply to MAIL FROM command))
>
> rgds
> iant
>
> -
>  QmailToaster hosted by: VR Hosted 
> -
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]