[qmailtoaster] limit on number forwards in qmailadmin
hi is there any particular reasoning why there is a limit of 3 email ids in qmailadmin under modify email account ? Routing > Forward To rajesh - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Has something changed in QT?
Hello to all. I stumbled across the same problem. I installed qmt iso based on centos4 then updated to 4.8. After that I booted the last centos5 from dvd and upgraded. Then when tried to newmodel, got the same error. But is only a matter of installing dkms-fuse and, do not forget to /etc/init/d/autofs start. I think the autofs is the answer. Then everything went ok. Also, later on configuring i remember i had to manually install libtool-ltld-devel to provide ltld.h. Sorry if i am not explaining very exactly but I made all these last year in october and i do not remember all the operations step by step. Hope this help. Regards. Aristotel Neamtu Patrick Ring wrote: I am putting together a virtual (VMWare) with the QmailToaster ISO (CentOS 4.X). I'm having problems with the newmodel script (of QTP) erroring out when it goes to mount the sandbox. In the past this always worked for me. (In the past I have not used the QmailToaster ISO disk...I usually loaded CentOS and then built/loaded QT) Specifically the errors occur right after Installing: fuse Installing: kernel-devel Installing: dkms Installing: fuse-unionfs Installing: dkms-fuse Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 0:0.23-1.qtp Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL Then right after it says "Complete!" fuse: device not found, try 'modprobe fuse' first FATAL: Module fuse not found. fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first fuse: device not found, try 'modprobe fuse' first mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does not exist Try 'cp --help' for more information. qtp-mount-sandbox: sandbox was not mounted successfully qtp-newmodel - qtp-mount-sandbox failed, exiting Anyway, I've tried to perform newmodel both before and after a "yum update", and I stumbled across a previous thread that recommended turning off the "autofs" service. No change either way. Has something changed in the newmodel script? Or is there something different between the CentOS/QT from the ISO vs when I load manually? Please advise. Thank you, Patrick Ring Patrick M. Ring P. Ring Technologies Louisiana Web Host, LLC. 985-868-4200 __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Has something changed in QT?
I did run across a thread on this list that talked about disabling autofs... So, do you think I need to make sure it is ON and not 0FF then? Thank you, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Borg To: qmailtoaster-list@qmailtoaster.com Sent: Sat Jan 02 04:51:24 2010 Subject: Re: [qmailtoaster] Has something changed in QT? Hello to all. I stumbled across the same problem. I installed qmt iso based on centos4 then updated to 4.8. After that I booted the last centos5 from dvd and upgraded. Then when tried to newmodel, got the same error. But is only a matter of installing dkms-fuse and, do not forget to /etc/init/d/autofs start. I think the autofs is the answer. Then everything went ok. Also, later on configuring i remember i had to manually install libtool-ltld-devel to provide ltld.h. Sorry if i am not explaining very exactly but I made all these last year in october and i do not remember all the operations step by step. Hope this help. Regards. Aristotel Neamtu Patrick Ring wrote: > I am putting together a virtual (VMWare) with the QmailToaster ISO > (CentOS 4.X). > > I'm having problems with the newmodel script (of QTP) erroring out > when it goes to mount the sandbox. > In the past this always worked for me. (In the past I have not used > the QmailToaster ISO disk...I usually loaded CentOS and then > built/loaded QT) > > Specifically the errors occur right after > Installing: fuse > Installing: kernel-devel > Installing: dkms > Installing: fuse-unionfs > Installing: dkms-fuse > > Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 > 0:0.23-1.qtp > Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 > 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL > > Then right after it says "Complete!" > fuse: device not found, try 'modprobe fuse' first > FATAL: Module fuse not found. > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist > cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does not exist > Try 'cp --help' for more information. > qtp-mount-sandbox: sandbox was not mounted successfully > > qtp-newmodel - qtp-mount-sandbox failed, exiting > > Anyway, I've tried to perform newmodel both before and after a "yum > update", and I stumbled across a previous thread that recommended > turning off the "autofs" service. No change either way. > > Has something changed in the newmodel script? Or is there something > different between the CentOS/QT from the ISO vs when I load manually? > > Please advise. > Thank you, > Patrick Ring > > > > Patrick M. Ring > P. Ring Technologies > Louisiana Web Host, LLC. > 985-868-4200 > > > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 4736 (20100101) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Has something changed in QT?
I cheched bash history and I am sure I started autofs right before running newmodel. And found a new thing. Although fuse reports to be installed, fuse.ko is missing, so I had to install kernel-headers and in my case kernel-smp-devel. Patrick Ring wrote: I did run across a thread on this list that talked about disabling autofs... So, do you think I need to make sure it is ON and not 0FF then? Thank you, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Borg To: qmailtoaster-list@qmailtoaster.com Sent: Sat Jan 02 04:51:24 2010 Subject: Re: [qmailtoaster] Has something changed in QT? Hello to all. I stumbled across the same problem. I installed qmt iso based on centos4 then updated to 4.8. After that I booted the last centos5 from dvd and upgraded. Then when tried to newmodel, got the same error. But is only a matter of installing dkms-fuse and, do not forget to /etc/init/d/autofs start. I think the autofs is the answer. Then everything went ok. Also, later on configuring i remember i had to manually install libtool-ltld-devel to provide ltld.h. Sorry if i am not explaining very exactly but I made all these last year in october and i do not remember all the operations step by step. Hope this help. Regards. Aristotel Neamtu Patrick Ring wrote: > I am putting together a virtual (VMWare) with the QmailToaster ISO > (CentOS 4.X). > > I'm having problems with the newmodel script (of QTP) erroring out > when it goes to mount the sandbox. > In the past this always worked for me. (In the past I have not used > the QmailToaster ISO disk...I usually loaded CentOS and then > built/loaded QT) > > Specifically the errors occur right after > Installing: fuse > Installing: kernel-devel > Installing: dkms > Installing: fuse-unionfs > Installing: dkms-fuse > > Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 > 0:0.23-1.qtp > Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 > 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL > > Then right after it says "Complete!" > fuse: device not found, try 'modprobe fuse' first > FATAL: Module fuse not found. > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist > cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does not exist > Try 'cp --help' for more information. > qtp-mount-sandbox: sandbox was not mounted successfully > > qtp-newmodel - qtp-mount-sandbox failed, exiting > > Anyway, I've tried to perform newmodel both before and after a "yum > update", and I stumbled across a previous thread that recommended > turning off the "autofs" service. No change either way. > > Has something changed in the newmodel script? Or is there something > different between the CentOS/QT from the ISO vs when I load manually? > > Please advise. > Thank you, > Patrick Ring > > > > Patrick M. Ring > P. Ring Technologies > Louisiana Web Host, LLC. > 985-868-4200 > > > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 4736 (20100101) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http
Re: [qmailtoaster] Has something changed in QT?
I forgot, here's all i have done. In my case fuse was installed but fuse.ko missing. I installed kernel headers for current running kernel and fuse sources then I rebuilt fuse.ko. For fuse sources I have fuse-2.7.4-1.nodist package. In fuse source you'll find script for config and install. I run ./configure, ./install-sh, make and make install. Then modprobe fuse run swiftly and newmodel had no problems further. Maybe autofs is not needed but it was a trial and error to find the problem with fuse. Borg wrote: I cheched bash history and I am sure I started autofs right before running newmodel. And found a new thing. Although fuse reports to be installed, fuse.ko is missing, so I had to install kernel-headers and in my case kernel-smp-devel. Patrick Ring wrote: I did run across a thread on this list that talked about disabling autofs... So, do you think I need to make sure it is ON and not 0FF then? Thank you, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Borg To: qmailtoaster-list@qmailtoaster.com Sent: Sat Jan 02 04:51:24 2010 Subject: Re: [qmailtoaster] Has something changed in QT? Hello to all. I stumbled across the same problem. I installed qmt iso based on centos4 then updated to 4.8. After that I booted the last centos5 from dvd and upgraded. Then when tried to newmodel, got the same error. But is only a matter of installing dkms-fuse and, do not forget to /etc/init/d/autofs start. I think the autofs is the answer. Then everything went ok. Also, later on configuring i remember i had to manually install libtool-ltld-devel to provide ltld.h. Sorry if i am not explaining very exactly but I made all these last year in october and i do not remember all the operations step by step. Hope this help. Regards. Aristotel Neamtu Patrick Ring wrote: > I am putting together a virtual (VMWare) with the QmailToaster ISO > (CentOS 4.X). > > I'm having problems with the newmodel script (of QTP) erroring out > when it goes to mount the sandbox. > In the past this always worked for me. (In the past I have not used > the QmailToaster ISO disk...I usually loaded CentOS and then > built/loaded QT) > > Specifically the errors occur right after > Installing: fuse > Installing: kernel-devel > Installing: dkms > Installing: fuse-unionfs > Installing: dkms-fuse > > Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 > 0:0.23-1.qtp > Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 > 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL > > Then right after it says "Complete!" > fuse: device not found, try 'modprobe fuse' first > FATAL: Module fuse not found. > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist > cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does not exist > Try 'cp --help' for more information. > qtp-mount-sandbox: sandbox was not mounted successfully > > qtp-newmodel - qtp-mount-sandbox failed, exiting > > Anyway, I've tried to perform newmodel both before and after a "yum > update", and I stumbled across a previous thread that recommended > turning off the "autofs" service. No change either way. > > Has something changed in the newmodel script? Or is there something > different between the CentOS/QT from the ISO vs when I load manually? > > Please advise. > Thank you, > Patrick Ring > > > > Patrick M. Ring > P. Ring Technologies > Louisiana Web Host, LLC. > 985-868-4200 > > > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 4736 (20100101) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To un
[qmailtoaster] Install qmail toaster in CentOS 5.4
Can I use Qmailtoaster, scripts to cenOS 5.0, to install in CentOS 5.4? -- [], Anderson Alves de Albuquerque. --- E-mails: andersonalvesdealbuquerque#hotmail.com (replace # by @) andersonaa#gmail.com (replace # by @) ICQ: 73222660 ---
Re: [qmailtoaster] Install qmail toaster in CentOS 5.4
Hi Anderson, Am 02.01.2010 um 15:39 schrieb Anderson Alves de Albuquerque: > Can I use Qmailtoaster, scripts to cenOS 5.0, to install in CentOS 5.4? > I did so and it worked just fine for me - just follow the instructions on the wiki for installation of QMT on Centos. Best, Martin -- "What a fool believes he sees, no wise man has the power to reason away..." Doobie Brothers - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Has something changed in QT?
I don't believe that autofs comes into play with fuse and unionfs, which is what qtp-newmodel uses now. On the other hand, a missing fuse.ko module is consistent with the error message(s) we're seeing. That's likely the problem. I'm not positive where that module comes from. I think it's built as part of the installation of the dkms-fuse package. If kernel-smp-devel is missing (and you're running the smp kernel), that's likely the culprit. Such a dependency might be missing. I'd like to get this fixed if we can pin this down. Borg wrote: I forgot, here's all i have done. In my case fuse was installed but fuse.ko missing. I installed kernel headers for current running kernel and fuse sources then I rebuilt fuse.ko. For fuse sources I have fuse-2.7.4-1.nodist package. In fuse source you'll find script for config and install. I run ./configure, ./install-sh, make and make install. Then modprobe fuse run swiftly and newmodel had no problems further. Maybe autofs is not needed but it was a trial and error to find the problem with fuse. Borg wrote: I cheched bash history and I am sure I started autofs right before running newmodel. And found a new thing. Although fuse reports to be installed, fuse.ko is missing, so I had to install kernel-headers and in my case kernel-smp-devel. Patrick Ring wrote: I did run across a thread on this list that talked about disabling autofs... So, do you think I need to make sure it is ON and not 0FF then? Thank you, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Borg To: qmailtoaster-list@qmailtoaster.com Sent: Sat Jan 02 04:51:24 2010 Subject: Re: [qmailtoaster] Has something changed in QT? Hello to all. I stumbled across the same problem. I installed qmt iso based on centos4 then updated to 4.8. After that I booted the last centos5 from dvd and upgraded. Then when tried to newmodel, got the same error. But is only a matter of installing dkms-fuse and, do not forget to /etc/init/d/autofs start. I think the autofs is the answer. Then everything went ok. Also, later on configuring i remember i had to manually install libtool-ltld-devel to provide ltld.h. Sorry if i am not explaining very exactly but I made all these last year in october and i do not remember all the operations step by step. Hope this help. Regards. Aristotel Neamtu Patrick Ring wrote: > I am putting together a virtual (VMWare) with the QmailToaster ISO > (CentOS 4.X). > > I'm having problems with the newmodel script (of QTP) erroring out > when it goes to mount the sandbox. > In the past this always worked for me. (In the past I have not used > the QmailToaster ISO disk...I usually loaded CentOS and then > built/loaded QT) > > Specifically the errors occur right after > Installing: fuse > Installing: kernel-devel > Installing: dkms > Installing: fuse-unionfs > Installing: dkms-fuse > > Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 > 0:0.23-1.qtp > Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 > 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL > > Then right after it says "Complete!" > fuse: device not found, try 'modprobe fuse' first > FATAL: Module fuse not found. > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > fuse: device not found, try 'modprobe fuse' first > mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist > cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does not exist > Try 'cp --help' for more information. > qtp-mount-sandbox: sandbox was not mounted successfully > > qtp-newmodel - qtp-mount-sandbox failed, exiting > > Anyway, I've tried to perform newmodel both before and after a "yum > update", and I stumbled across a previous thread that recommended > turning off the "autofs" service. No change either way. > > Has something changed in the newmodel script? Or is there something > different between the CentOS/QT from the ISO vs when I load manually? > > Please advise. > Thank you, > Patrick Ring > > > > Patrick M. Ring > P. Ring Technologies > Louisiana Web Host, LLC. > 985-868-4200 > > > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 4736 (20100101) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message wa
Re: [qmailtoaster] Re: Has something changed in QT?
ot mounted successfully > > qtp-newmodel - qtp-mount-sandbox failed, exiting > > Anyway, I've tried to perform newmodel both before and after a "yum > update", and I stumbled across a previous thread that recommended > turning off the "autofs" service. No change either way. > > Has something changed in the newmodel script? Or is there something > different between the CentOS/QT from the ISO vs when I load manually? > > Please advise. > Thank you, > Patrick Ring > > > > Patrick M. Ring > P. Ring Technologies > Louisiana Web Host, LLC. > 985-868-4200 > > > > __ Information from ESET NOD32 Antivirus, version of virus > signature database 4736 (20100101) __ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 4736 (20100101) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! __ Information from ESET NOD32 Antivirus, version of virus signature database 4738 (20100102) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Has something changed in QT?
onfs >>>> > Installing: dkms-fuse >>>> > > Installed: dkms-fuse.noarch 0:2.7.4-1.nodist.rf fuse-unionfs.i386 >>>> > 0:0.23-1.qtp >>>> > Dependancy Installed: dkms.noarch 0:2.0.22.0-1.el4.rf fuse.i386 >>>> > 0:2.7.4-1.qtp kernel-devel.i686 0:2.6.9-89.0.18.EL >>>> > > Then right after it says "Complete!" >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > FATAL: Module fuse not found. >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > fuse: device not found, try 'modprobe fuse' first >>>> > mount: mount point /mnt/qtp-sandbox/var/lib/rpm does not exist >>>> > cp: '/mnt/qtp-sandbox/var/lib/rpm' : specified directory does >>>> not exist >>>> > Try 'cp --help' for more information. >>>> > qtp-mount-sandbox: sandbox was not mounted successfully >>>> > > qtp-newmodel - qtp-mount-sandbox failed, exiting >>>> > > Anyway, I've tried to perform newmodel both before and after a >>>> "yum >>>> > update", and I stumbled across a previous thread that recommended >>>> > turning off the "autofs" service. No change either way. >>>> > > Has something changed in the newmodel script? Or is there >>>> something >>>> > different between the CentOS/QT from the ISO vs when I load >>>> manually? >>>> > > Please advise. >>>> > Thank you, >>>> > Patrick Ring >>>> > > > > Patrick M. Ring >>>> > P. Ring Technologies >>>> > Louisiana Web Host, LLC. >>>> > 985-868-4200 >>>> > > >>>> > >>>> > __ Information from ESET NOD32 Antivirus, version of virus >>>> > signature database 4736 (20100101) __ >>>> > >>>> > The message was checked by ESET NOD32 Antivirus. >>>> > >>>> > http://www.eset.com >>>> >>>> >>>> >>>> __ Information from ESET NOD32 Antivirus, version of virus >>>> signature database 4736 (20100101) __ >>>> >>>> The message was checked by ESET NOD32 Antivirus. >>>> >>>> http://www.eset.com >>>> >>>> >>>> >>>> - >>>> >>>> >>>> Qmailtoaster is sponsored by Vickers Consulting Group >>>> (www.vickersconsulting.com) >>>> Vickers Consulting Group offers Qmailtoaster support and >>>> installations. >>>> If you need professional help with your setup, contact them >>>> today! >>>> - >>>> >>>> >>>> Please visit qmailtoaster.com for the latest news, updates, >>>> and packages. >>>> To unsubscribe, e-mail: >>>> qmailtoaster-list-unsubscr...@qmailtoaster.com >>>> For additional commands, e-mail: >>>> qmailtoaster-list-h...@qmailtoaster.com >>>> >>>> >>>> >>>> >>>> __ Information from ESET NOD32 Antivirus, version of virus >>>> signature database 4736 (20100101) __ >>>> >>>> The message was checked by ESET NOD32 Antivirus. >>>> >>>> http://www.eset.com >>> >>> >>> >>> __ Information from ESET NOD32 Antivirus, version of virus >>> signature database 4736 (20100
[qmailtoaster] spamassassin faulty scoring rule---FH_DATE_PAST_20XX
Happy New Year, There is a rule in spamassassin that has started running up your spam scores (erroneously) with the beginning of the new decade, that has a (alledged) fix in svn, and that hasn't been propagated out for mass consumption. I lurk on the centos list and this was discussed 1/2/2010. This affected my box, so I am re-listing it here, 'cuz it appears to affect all spamassassin users not using the latest ruleset. Gilbert says look for this in your email headers: > X-Spam-Report: > * 3.4 FH_DATE_PAST_20XX The date is grossly in the future. Fabian says: Yes and they haven't fixed it (yet) : https://issues.apache.org/SpamAssassin/show_bug.cgi?id=6269 Change your score for that rule, or disable it, or change it like described in the bug entry I like the fact that they said it was "fixed" in svn some months ago, but it's still in svn and not in the $current release so ... :/ Nothing than a sa-update will not fix when they decide to update the base rules Kai says: add score FH_DATE_PAST_20XX 0 to your /etc/mail/spamassassin/local.cf And you should use Bayes. A well-trained Bayes would have balanced that down (assuming it was ham). thanks to gilbert, fabian, and kai for the thread. I am on a Centos 4.x box, and I seem to be having perl issues with running sa-update that I need to troubleshoot on Monday...so you may or may not be affected. Also, that link seems to imply the fix has been pushed out with ruleset 895075. Heads up anyways. regards, fuzzy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Squirremail in Portuguese
I am with Qmail-Toaster in my server CentOS 5.X, I need to change language to Portuguese. How can I change English (default) to Portuguese? -- [], Anderson Alves de Albuquerque. --- E-mails: andersonalvesdealbuquerque#hotmail.com (replace # by @) andersonaa#gmail.com (replace # by @) ICQ: 73222660 ---
[qmailtoaster] concerning me, defaultdomain, locals,
hi i need some descriptive explanations (from a layman's point of view) for me, defaultdomain, locals files in the qmail control directory ie their significance and how they are used i have searched but got very short explanations and surprisingly nothing here either http://www.qmailwiki.org/index.php/Qmail-control-files thanks rajesh - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] spamassassin faulty scoring rule---FH_DATE_PAST_20XX
> Happy New Year, > > There is a rule in spamassassin that has started running up your spam > scores (erroneously) with the beginning of the new decade, that has a > (alledged) fix in svn, and that hasn't been propagated out for mass > consumption. and i now see shubes reported this 2 days ago. must...read...list...mail...before posting. sorry for the noise. fuzzy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] spamassassin faulty scoring rule---FH_DATE_PAST_20XX
Thanks for that. I wondered why I was getting an increase in spam. Maybe change it from 20XX to 201X - Should be set for the next 10 years ;) --- On Sun, 1/3/10, David Good wrote: > From: David Good > Subject: [qmailtoaster] spamassassin faulty scoring rule---FH_DATE_PAST_20XX > To: qmailtoaster-list@qmailtoaster.com > Date: Sunday, January 3, 2010, 12:12 AM > Happy New Year, > > There is a rule in spamassassin that has started running up > your spam > scores (erroneously) with the beginning of the new decade, > that has a > (alledged) fix in svn, and that hasn't been propagated out > for mass > consumption. > > I lurk on the centos list and this was discussed > 1/2/2010. This > affected my box, so I am re-listing it here, 'cuz it > appears to affect > all spamassassin users not using the latest ruleset. > > Gilbert says look for this in your email headers: > > > > X-Spam-Report: > > * 3.4 FH_DATE_PAST_20XX The > date is grossly in the future. > > > > Fabian says: > > > Yes and they haven't fixed it (yet) : > https://issues.apache.org/SpamAssassin/show_bug.cgi?id=6269 > Change your score for that rule, or disable it, or change > it like > described in the bug entry > I like the fact that they said it was "fixed" in svn some > months ago, > but it's still in svn and not in the $current release > so ... :/ > Nothing than a sa-update will not fix when they decide to > update the > base rules > > > Kai says: > > > add > > score FH_DATE_PAST_20XX 0 > > to your /etc/mail/spamassassin/local.cf > And you should use Bayes. A well-trained Bayes would have > balanced that > down (assuming it was ham). > > > thanks to gilbert, fabian, and kai for the thread. > > > I am on a Centos 4.x box, and I seem to be having perl > issues with > running sa-update that I need to troubleshoot on > Monday...so you may or > may not be affected. Also, that link seems to imply > the fix has been > pushed out with ruleset 895075. Heads up > anyways. > > regards, > fuzzy > > > - > Qmailtoaster is sponsored by Vickers Consulting Group > (www.vickersconsulting.com) > Vickers Consulting Group offers Qmailtoaster > support and installations. > If you need professional help with > your setup, contact them today! > - > Please visit qmailtoaster.com for > the latest news, updates, and packages. > > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com > For additional commands, e-mail: > qmailtoaster-list-h...@qmailtoaster.com > > > - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
