[qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
On 03/04/2011 01:39 PM, Nigel Reed wrote: Ah I thought I remembered seeing something about no -devel package, but that was in relation to vpopmail so ignore me. If it's ready to go...where is it? Why doesn't someone pull the trigger on it? I still need to go through the configuration file, and probably create a patch for QMT, so everyone doesn't need to repeat that process. If you'd like to wait that's fine. I'll be putting the rpms in the QTP repo when I get to that point. If you'd like the spec or src.rpm file I have so far, I can email you those. Just say the word. That said, what happens to the packages that require courier-imap? Good question. I still have courier installed on my QMT. I just have a 'down' file in the supervise directories for it, so it never starts. I know that dovecot breaks the mrtg graphs. This should be fixed at some point. BL, adding dovecot is separate from removing courier. ;) Someone does need to go through packages and see what's needed in order to remove courier. maildrop-toaster requires courier-imap to build I can't imagine why that is. I suppose it might use a courier library of some sort. Then again, maildrop might not really need courier-imap. Dovecot is going to be a major piece in the long run. I expect to see the dovecot-pigeonhole package (LDA) totally replace maildrop and vdelivermail at some point. It will be sweet to be able to specify mail filtering rules with an email client (e.g. Thunderbird) and have the rules run on the server. (This feature is right around the corner) control-panel-toaster requires courier-imap to install control-panel-toaster needs some work, and that's one piece of it. Is there anything courier-imap specific in there or can we have them require imap-server ? I don't know the answer to that off hand. It's going to take a little work to sever courier entirely from QMT. I'm sure Jake will be tackling that in the v2 release. How much of dovecot will end up in QMTv2 is up in the air at this point (ttbomk). I expect we may see just imap and pop3 in QMTv2, with pigeonhole later on. -- -Eric 'shubes' - Original Message From: Eric Shubert To: qmailtoaster-list@qmailtoaster.com Sent: Fri, March 4, 2011 2:24:18 PM Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released What develop stuff? AFAIK, it's ready to go. There is a dovecot-debug that rpmbuild spits out, fwiw. Never used that myself. -- -Eric 'shubes' On 03/04/2011 01:14 PM, Nigel Reed wrote: Did I see you mention that it didn't come with the develop stuff? Maybe I'll just wait until Dovecot is ready for qmt (will that ever happen? It was so damn easy to compile and install that I don't know why I didn't do it a year ago). Again, it seems stupid to repeat all the work that is already being done. Thanks, Nigel - Original Message ---- From: Eric Shubert To: qmailtoaster-list@qmailtoaster.com Sent: Fri, March 4, 2011 2:05:20 PM Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released The 2.0.9 srpm I have is 4.5M. Would you like me to email it to you directly? (Note, I haven't adjusted any config settings yet) - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
Ah I thought I remembered seeing something about no -devel package, but that was in relation to vpopmail so ignore me. If it's ready to go...where is it? Why doesn't someone pull the trigger on it? That said, what happens to the packages that require courier-imap? maildrop-toaster requires courier-imap to build control-panel-toaster requires courier-imap to install Is there anything courier-imap specific in there or can we have them require imap-server ? - Original Message From: Eric Shubert To: qmailtoaster-list@qmailtoaster.com Sent: Fri, March 4, 2011 2:24:18 PM Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released What develop stuff? AFAIK, it's ready to go. There is a dovecot-debug that rpmbuild spits out, fwiw. Never used that myself. -- -Eric 'shubes' On 03/04/2011 01:14 PM, Nigel Reed wrote: > Did I see you mention that it didn't come with the develop stuff? Maybe I'll > just wait until Dovecot is ready for qmt (will that ever happen? It was so damn > easy to compile and install that I don't know why I didn't do it a year ago). > Again, it seems stupid to repeat all the work that is already being done. > > Thanks, > Nigel > > > > - Original Message > From: Eric Shubert > To: qmailtoaster-list@qmailtoaster.com > Sent: Fri, March 4, 2011 2:05:20 PM > Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released > > The 2.0.9 srpm I have is 4.5M. Would you like me to email it to you > directly? > (Note, I haven't adjusted any config settings yet) - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
What develop stuff? AFAIK, it's ready to go. There is a dovecot-debug that rpmbuild spits out, fwiw. Never used that myself. -- -Eric 'shubes' On 03/04/2011 01:14 PM, Nigel Reed wrote: Did I see you mention that it didn't come with the develop stuff? Maybe I'll just wait until Dovecot is ready for qmt (will that ever happen? It was so damn easy to compile and install that I don't know why I didn't do it a year ago). Again, it seems stupid to repeat all the work that is already being done. Thanks, Nigel - Original Message From: Eric Shubert To: qmailtoaster-list@qmailtoaster.com Sent: Fri, March 4, 2011 2:05:20 PM Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released The 2.0.9 srpm I have is 4.5M. Would you like me to email it to you directly? (Note, I haven't adjusted any config settings yet) - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
Did I see you mention that it didn't come with the develop stuff? Maybe I'll just wait until Dovecot is ready for qmt (will that ever happen? It was so damn easy to compile and install that I don't know why I didn't do it a year ago). Again, it seems stupid to repeat all the work that is already being done. Thanks, Nigel - Original Message From: Eric Shubert To: qmailtoaster-list@qmailtoaster.com Sent: Fri, March 4, 2011 2:05:20 PM Subject: [qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released The 2.0.9 srpm I have is 4.5M. Would you like me to email it to you directly? (Note, I haven't adjusted any config settings yet) -- -Eric 'shubes' On 03/04/2011 12:39 PM, Nigel Reed wrote: > Aww crud! I don't believe it! > > I just downloaded 2.0.9 and have just got through testing it on Mandriva > and reporting back! > > I had to change permissions on /home/vpopmail and > /home/vpopmail/lib/libvpopmail.a but otherwise, it worked pretty much > out the box. > > So, what's the holdup? :D > > This is so so so much earlier than courier-*. > > Do you have an existing, .rpm file for dovecot? I'd like to maybe adapt > it for Mandrvia and submit patches, like I'm doing with the rest. > > > *From:* Eric Broch > *To:* qmailtoaster-list@qmailtoaster.com > *Sent:* Fri, March 4, 2011 1:14:49 PM > *Subject:* [qmailtoaster] Fwd: [Dovecot] v2.0.10 released > > And as soon as v2.0.9 is ready...it goes on... ;-) > > Original Message > Subject: [Dovecot] v2.0.10 released > Date: Fri, 04 Mar 2011 21:10:13 +0200 > From: Timo Sirainen > Reply-To: Dovecot Mailing List > To: dovecot-n...@dovecot.org, dove...@dovecot.org > > > > http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz > http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz.sig > > I thought it was finally time to make a new v2.0 release. Or probably it > was a while ago already, but I've been a bit lazy this year. Maybe it's > because this is the first time in last 5 years when all branches of > Dovecot have been quite stable and I haven't been stressing on it. Of > course there are some v2.0 features that still have some bugs, but few > people are complaining about them. > > v2.1 development branch also appears to be pretty good shape > . I'm > hopeful that v2.1.rc1 will be out before summer. > > * LMTP: For user+detail@domain deliveries, the +detail is again written > to Delivered-To: > header. > * Skip auth penalty checks from IPs in login_trusted_networks. > > + Added import_environment setting. > + Added submission_host setting to send mails via SMTP instead of > via sendmail binary. > + Added doveadm acl get/set/delete commands for ACL manipulation, > similar to how IMAP ACL extension works. > + Added doveadm acl debug command to help debug and fix problems > with why shared mailboxes aren't working as expected. > - IMAP: Fixed hangs with COMPRESS extension > - IMAP: Fixed a hang when trying to COPY to a nonexistent mailbox. > - IMAP: Fixed hang/crash with SEARCHRES + pipelining $. > - IMAP: Fixed assert-crash if IDLE+DONE is sent in same TCP packet. > - LMTP: Fixed sending multiple messages in a session. > - doveadm: Fixed givin > g parameters to mail commands. > - doveadm import: Settings weren't correctly used for the > import storage. > - dsync: Fixed somewhat random failures with > saving messages to > remote dsync. > - v2.0.9: Config reload didn't notify running processes with > shutdown_clients=no, so they could have kept serving new clients > with old settings. > > > - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
The 2.0.9 srpm I have is 4.5M. Would you like me to email it to you directly? (Note, I haven't adjusted any config settings yet) -- -Eric 'shubes' On 03/04/2011 12:39 PM, Nigel Reed wrote: Aww crud! I don't believe it! I just downloaded 2.0.9 and have just got through testing it on Mandriva and reporting back! I had to change permissions on /home/vpopmail and /home/vpopmail/lib/libvpopmail.a but otherwise, it worked pretty much out the box. So, what's the holdup? :D This is so so so much earlier than courier-*. Do you have an existing, .rpm file for dovecot? I'd like to maybe adapt it for Mandrvia and submit patches, like I'm doing with the rest. *From:* Eric Broch *To:* qmailtoaster-list@qmailtoaster.com *Sent:* Fri, March 4, 2011 1:14:49 PM *Subject:* [qmailtoaster] Fwd: [Dovecot] v2.0.10 released And as soon as v2.0.9 is ready...it goes on... ;-) Original Message Subject:[Dovecot] v2.0.10 released Date: Fri, 04 Mar 2011 21:10:13 +0200 From: Timo Sirainen Reply-To: Dovecot Mailing List To: dovecot-n...@dovecot.org, dove...@dovecot.org http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz.sig I thought it was finally time to make a new v2.0 release. Or probably it was a while ago already, but I've been a bit lazy this year. Maybe it's because this is the first time in last 5 years when all branches of Dovecot have been quite stable and I haven't been stressing on it. Of course there are some v2.0 features that still have some bugs, but few people are complaining about them. v2.1 development branch also appears to be pretty good shape . I'm hopeful that v2.1.rc1 will be out before summer. * LMTP: For user+detail@domain deliveries, the +detail is again written to Delivered-To: header. * Skip auth penalty checks from IPs in login_trusted_networks. + Added import_environment setting. + Added submission_host setting to send mails via SMTP instead of via sendmail binary. + Added doveadm acl get/set/delete commands for ACL manipulation, similar to how IMAP ACL extension works. + Added doveadm acl debug command to help debug and fix problems with why shared mailboxes aren't working as expected. - IMAP: Fixed hangs with COMPRESS extension - IMAP: Fixed a hang when trying to COPY to a nonexistent mailbox. - IMAP: Fixed hang/crash with SEARCHRES + pipelining $. - IMAP: Fixed assert-crash if IDLE+DONE is sent in same TCP packet. - LMTP: Fixed sending multiple messages in a session. - doveadm: Fixed givin g parameters to mail commands. - doveadm import: Settings weren't correctly used for the import storage. - dsync: Fixed somewhat random failures with saving messages to remote dsync. - v2.0.9: Config reload didn't notify running processes with shutdown_clients=no, so they could have kept serving new clients with old settings. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Fwd: [Dovecot] v2.0.10 released
Ha! I've got the process down now and it's pretty fresh, so I'll go ahead and try it. Hope none of the patches (from Fedora) break! -- -Eric 'shubes' On 03/04/2011 12:14 PM, Eric Broch wrote: And as soon as v2.0.9 is ready...it goes on... ;-) Original Message Subject:[Dovecot] v2.0.10 released Date: Fri, 04 Mar 2011 21:10:13 +0200 From: Timo Sirainen Reply-To: Dovecot Mailing List To: dovecot-n...@dovecot.org, dove...@dovecot.org http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.10.tar.gz.sig I thought it was finally time to make a new v2.0 release. Or probably it was a while ago already, but I've been a bit lazy this year. Maybe it's because this is the first time in last 5 years when all branches of Dovecot have been quite stable and I haven't been stressing on it. Of course there are some v2.0 features that still have some bugs, but few people are complaining about them. v2.1 development branch also appears to be pretty good shape. I'm hopeful that v2.1.rc1 will be out before summer. * LMTP: For user+detail@domain deliveries, the +detail is again written to Delivered-To: header. * Skip auth penalty checks from IPs in login_trusted_networks. + Added import_environment setting. + Added submission_host setting to send mails via SMTP instead of via sendmail binary. + Added doveadm acl get/set/delete commands for ACL manipulation, similar to how IMAP ACL extension works. + Added doveadm acl debug command to help debug and fix problems with why shared mailboxes aren't working as expected. - IMAP: Fixed hangs with COMPRESS extension - IMAP: Fixed a hang when trying to COPY to a nonexistent mailbox. - IMAP: Fixed hang/crash with SEARCHRES + pipelining $. - IMAP: Fixed assert-crash if IDLE+DONE is sent in same TCP packet. - LMTP: Fixed sending multiple messages in a session. - doveadm: Fixed giving parameters to mail commands. - doveadm import: Settings weren't correctly used for the import storage. - dsync: Fixed somewhat random failures with saving messages to remote dsync. - v2.0.9: Config reload didn't notify running processes with shutdown_clients=no, so they could have kept serving new clients with old settings. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com