Re: [R-pkg-devel] devtools::release() does not release
Maybe off-topic, but I see that the tarball is 100+Mb ... won't that raise flags upon CRAN submission? (The current CRAN tarball is <1 Mb ...) From the CRAN policies, there's no explicit limit given but ... = Packages should be of the minimum necessary size. Reasonable compression should be used for data (not just .rda files) and PDF documentation: CRAN will if necessary pass the latter through qpdf. As a general rule, neither data nor documentation should exceed 5MB (which covers several books). A CRAN package is not an appropriate way to distribute course notes, and authors will be asked to trim their documentation to a maximum of 5MB. Where a large amount of data is required (even after compression), consideration should be given to a separate data-only package which can be updated only rarely (since older versions of packages are archived in perpetuity). Similar considerations apply to other forms of “data”, e.g., .jar files. On 11/26/20 5:52 PM, Duncan Murdoch wrote: Why not use the CRAN submission web page, as documented here: https://cran.r-project.org/web/packages/policies.html#Submission? Duncan Murdoch On 26/11/2020 2:57 p.m., Gábor Csárdi wrote: Why not submit a bug report at the devtools repository? ❯ packageDescription("devtools")$BugReports [1] "https://github.com/r-lib/devtools/issues"; Gabor On Thu, Nov 26, 2020 at 7:50 PM Spencer Graves wrote: Hi folks, devtools::release() gave the following errors: ... Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$submit == "1") { : argument is of length zero In addition: Warning messages: 1: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored 2: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored Jim Ramsay got this after setwd to what seemed to be the appropriate working directory and then running devtools::release(), as noted above. As near as both of us can determine, we've followed essentially the same protocol here as with other package submissions. In case you want the entire devtools::release() transcript, it appears below running under Big Sur on a Mac. Suggestions? Thanks, Spencer Graves & Jim Ramsay —— devtools::release() Have you checked for spelling errors (with `spell_check()`)? 1: Not yet 2: Nope 3: Absolutely Selection: 3 Have you run `R CMD check` locally? 1: Yes 2: I forget 3: No Selection: 1 ── Running additional devtools checks for fda Checking version number has three components... OK Checking dependencies don't rely on dev versions... OK Checking DESCRIPTION doesn't have Remotes field... OK ── Were devtool's checks successful? 1: I forget 2: No 3: Absolutely Selection: 3 Have you fixed all existing problems at https://cran.rstudio.com//web/checks/check_results_fda.html ? 1: Yes 2: Not yet 3: No Selection: 1 Have you checked on R-hub (with `check_rhub()`)? 1: Not yet 2: I forget 3: Definitely Selection: 3 Have you checked on win-builder (with `check_win_devel()`)? 1: No 2: Nope 3: Absolutely Selection: 3 Have you checked the 67 reverse dependencies (with the revdepcheck package)? 1: Definitely 2: No 3: U... Maybe? Selection: 1 Have you updated `NEWS.md` file? 1: U... Maybe? 2: No 3: Yeah Selection: 3 Have you updated `DESCRIPTION`? 1: Yup 2: Nope 3: I forget Selection: 1 Have you updated `cran-comments.md?` 1: Nope 2: Not yet 3: Yeah Selection: 3 ── Running Git checks for fda Current branch: master Checking uncommitted files... WARNING: All files should be tracked and committed before release. Please add and commit. Checking synchronisation with remote branch... ERROR: Error in 'git2r_remote_fetch': unsupported URL protocol ── Were Git checks successful? 1: Not yet 2: Nope 3: Yup Selection: 3 Is your email address ram...@psych.mcgill.ca? 1: Yup 2: I forget 3: U... Maybe? Selection: 1 Building ✓ checking for file ‘/Users/jamesramsay/Documents/R/fda_work/fda/DESCRIPTION’ (437ms) ─ preparing ‘fda’: (5.8s) ✓ checking DESCRIPTION meta-information ... ─ checking for LF line-endings in source and make files and shell scripts (1.6s) ─ checking for empty or unneeded directories ─ building ‘fda_5.1.7.tar.gz’ Submitting file: /var/folders/sc/6zzfzqbs5w7dl8q5g18tlqfcgn/T//RtmpbcSyMD/fda_5.1.7.tar.gz File size: 102.9 Mb Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$s
Re: [R-pkg-devel] devtools::release() does not release
Why not use the CRAN submission web page, as documented here: https://cran.r-project.org/web/packages/policies.html#Submission? Duncan Murdoch On 26/11/2020 2:57 p.m., Gábor Csárdi wrote: Why not submit a bug report at the devtools repository? ❯ packageDescription("devtools")$BugReports [1] "https://github.com/r-lib/devtools/issues"; Gabor On Thu, Nov 26, 2020 at 7:50 PM Spencer Graves wrote: Hi folks, devtools::release() gave the following errors: ... Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$submit == "1") { : argument is of length zero In addition: Warning messages: 1: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored 2: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored Jim Ramsay got this after setwd to what seemed to be the appropriate working directory and then running devtools::release(), as noted above. As near as both of us can determine, we've followed essentially the same protocol here as with other package submissions. In case you want the entire devtools::release() transcript, it appears below running under Big Sur on a Mac. Suggestions? Thanks, Spencer Graves & Jim Ramsay —— devtools::release() Have you checked for spelling errors (with `spell_check()`)? 1: Not yet 2: Nope 3: Absolutely Selection: 3 Have you run `R CMD check` locally? 1: Yes 2: I forget 3: No Selection: 1 ── Running additional devtools checks for fda Checking version number has three components... OK Checking dependencies don't rely on dev versions... OK Checking DESCRIPTION doesn't have Remotes field... OK ── Were devtool's checks successful? 1: I forget 2: No 3: Absolutely Selection: 3 Have you fixed all existing problems at https://cran.rstudio.com//web/checks/check_results_fda.html ? 1: Yes 2: Not yet 3: No Selection: 1 Have you checked on R-hub (with `check_rhub()`)? 1: Not yet 2: I forget 3: Definitely Selection: 3 Have you checked on win-builder (with `check_win_devel()`)? 1: No 2: Nope 3: Absolutely Selection: 3 Have you checked the 67 reverse dependencies (with the revdepcheck package)? 1: Definitely 2: No 3: U... Maybe? Selection: 1 Have you updated `NEWS.md` file? 1: U... Maybe? 2: No 3: Yeah Selection: 3 Have you updated `DESCRIPTION`? 1: Yup 2: Nope 3: I forget Selection: 1 Have you updated `cran-comments.md?` 1: Nope 2: Not yet 3: Yeah Selection: 3 ── Running Git checks for fda Current branch: master Checking uncommitted files... WARNING: All files should be tracked and committed before release. Please add and commit. Checking synchronisation with remote branch... ERROR: Error in 'git2r_remote_fetch': unsupported URL protocol ── Were Git checks successful? 1: Not yet 2: Nope 3: Yup Selection: 3 Is your email address ram...@psych.mcgill.ca? 1: Yup 2: I forget 3: U... Maybe? Selection: 1 Building ✓ checking for file ‘/Users/jamesramsay/Documents/R/fda_work/fda/DESCRIPTION’ (437ms) ─ preparing ‘fda’: (5.8s) ✓ checking DESCRIPTION meta-information ... ─ checking for LF line-endings in source and make files and shell scripts (1.6s) ─ checking for empty or unneeded directories ─ building ‘fda_5.1.7.tar.gz’ Submitting file: /var/folders/sc/6zzfzqbs5w7dl8q5g18tlqfcgn/T//RtmpbcSyMD/fda_5.1.7.tar.gz File size: 102.9 Mb Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$submit == "1") { : argument is of length zero In addition: Warning messages: 1: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored 2: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored __ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel __ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel __ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel
Re: [R-pkg-devel] devtools::release() does not release
Why not submit a bug report at the devtools repository? ❯ packageDescription("devtools")$BugReports [1] "https://github.com/r-lib/devtools/issues"; Gabor On Thu, Nov 26, 2020 at 7:50 PM Spencer Graves wrote: > > Hi folks, > > > devtools::release() gave the following errors: > > > ... > Ready to submit fda (5.1.7) to CRAN? > 1: Not yet > 2: Absolutely > 3: U... Maybe? > > Selection: 2 > Uploading package & comments > Confirming submission > Error in if (new_url$query$submit == "1") { : argument is of length zero > In addition: Warning messages: > 1: In charToRaw(enc2utf8(val)) : > argument should be a character vector of length 1 > all but the first element will be ignored > 2: In charToRaw(enc2utf8(val)) : > argument should be a character vector of length 1 > all but the first element will be ignored > > > Jim Ramsay got this after setwd to what seemed to be the appropriate > working directory and then running devtools::release(), as noted above. > As near as both of us can determine, we've followed essentially the same > protocol here as with other package submissions. > > > In case you want the entire devtools::release() transcript, it > appears below running under Big Sur on a Mac. > > > Suggestions? > Thanks, > Spencer Graves & Jim Ramsay > > > > —— > > > > devtools::release() > > > > Have you checked for spelling errors (with `spell_check()`)? > > 1: Not yet > > 2: Nope > > 3: Absolutely > > > > Selection: 3 > > Have you run `R CMD check` locally? > > 1: Yes > > 2: I forget > > 3: No > > > > Selection: 1 > > ── Running additional devtools checks for fda > > Checking version number has three components... OK > > Checking dependencies don't rely on dev versions... OK > > Checking DESCRIPTION doesn't have Remotes field... OK > > ── > > Were devtool's checks successful? > > 1: I forget > > 2: No > > 3: Absolutely > > > > Selection: 3 > > Have you fixed all existing problems at > > https://cran.rstudio.com//web/checks/check_results_fda.html ? > > 1: Yes > > 2: Not yet > > 3: No > > > > Selection: 1 > > Have you checked on R-hub (with `check_rhub()`)? > > 1: Not yet > > 2: I forget > > 3: Definitely > > > > Selection: 3 > > Have you checked on win-builder (with `check_win_devel()`)? > > 1: No > > 2: Nope > > 3: Absolutely > > > > Selection: 3 > > Have you checked the 67 reverse dependencies (with the revdepcheck > package)? > > 1: Definitely > > 2: No > > 3: U... Maybe? > > > > Selection: 1 > > Have you updated `NEWS.md` file? > > 1: U... Maybe? > > 2: No > > 3: Yeah > > > > Selection: 3 > > Have you updated `DESCRIPTION`? > > 1: Yup > > 2: Nope > > 3: I forget > > > > Selection: 1 > > Have you updated `cran-comments.md?` > > 1: Nope > > 2: Not yet > > 3: Yeah > > > > Selection: 3 > > ── Running Git checks for fda > > Current branch: master > > Checking uncommitted files... > > WARNING: All files should be tracked and committed before release. > Please add and commit. > > Checking synchronisation with remote branch... > > ERROR: Error in 'git2r_remote_fetch': unsupported URL protocol > > > > ── > > Were Git checks successful? > > 1: Not yet > > 2: Nope > > 3: Yup > > > > Selection: 3 > > Is your email address ram...@psych.mcgill.ca? > > 1: Yup > > 2: I forget > > 3: U... Maybe? > > > > Selection: 1 > > Building > > ✓ checking for file > ‘/Users/jamesramsay/Documents/R/fda_work/fda/DESCRIPTION’ (437ms) > > ─ preparing ‘fda’: (5.8s) > > ✓ checking DESCRIPTION meta-information ... > > ─ checking for LF line-endings in source and make files and shell > scripts (1.6s) > > ─ checking for empty or unneeded directories > > ─ building ‘fda_5.1.7.tar.gz’ > > > > Submitting file: > /var/folders/sc/6zzfzqbs5w7dl8q5g18tlqfcgn/T//RtmpbcSyMD/fda_5.1.7.tar.gz > > File size: 102.9 Mb > > Ready to submit fda (5.1.7) to CRAN? > > 1: Not yet > > 2: Absolutely > > 3: U... Maybe? > > > > Selection: 2 > > Uploading package & comments > > Confirming submission > > Error in if (new_url$query$submit == "1") { : argument is of length zero > > In addition: Warning messages: > > 1: In charToRaw(enc2utf8(val)) : > > argument should be a character vector of length 1 > > all but the first element will be ignored > > 2: In charToRaw(enc2utf8(val)) : > > argument should be a character vector of length 1 > > all but the first element will be ignored > > > > > > __ > R-package-devel@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-package-devel __ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel
[R-pkg-devel] devtools::release() does not release
Hi folks, devtools::release() gave the following errors: ... Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$submit == "1") { : argument is of length zero In addition: Warning messages: 1: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored 2: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored Jim Ramsay got this after setwd to what seemed to be the appropriate working directory and then running devtools::release(), as noted above. As near as both of us can determine, we've followed essentially the same protocol here as with other package submissions. In case you want the entire devtools::release() transcript, it appears below running under Big Sur on a Mac. Suggestions? Thanks, Spencer Graves & Jim Ramsay —— devtools::release() Have you checked for spelling errors (with `spell_check()`)? 1: Not yet 2: Nope 3: Absolutely Selection: 3 Have you run `R CMD check` locally? 1: Yes 2: I forget 3: No Selection: 1 ── Running additional devtools checks for fda Checking version number has three components... OK Checking dependencies don't rely on dev versions... OK Checking DESCRIPTION doesn't have Remotes field... OK ── Were devtool's checks successful? 1: I forget 2: No 3: Absolutely Selection: 3 Have you fixed all existing problems at https://cran.rstudio.com//web/checks/check_results_fda.html ? 1: Yes 2: Not yet 3: No Selection: 1 Have you checked on R-hub (with `check_rhub()`)? 1: Not yet 2: I forget 3: Definitely Selection: 3 Have you checked on win-builder (with `check_win_devel()`)? 1: No 2: Nope 3: Absolutely Selection: 3 Have you checked the 67 reverse dependencies (with the revdepcheck package)? 1: Definitely 2: No 3: U... Maybe? Selection: 1 Have you updated `NEWS.md` file? 1: U... Maybe? 2: No 3: Yeah Selection: 3 Have you updated `DESCRIPTION`? 1: Yup 2: Nope 3: I forget Selection: 1 Have you updated `cran-comments.md?` 1: Nope 2: Not yet 3: Yeah Selection: 3 ── Running Git checks for fda Current branch: master Checking uncommitted files... WARNING: All files should be tracked and committed before release. Please add and commit. Checking synchronisation with remote branch... ERROR: Error in 'git2r_remote_fetch': unsupported URL protocol ── Were Git checks successful? 1: Not yet 2: Nope 3: Yup Selection: 3 Is your email address ram...@psych.mcgill.ca? 1: Yup 2: I forget 3: U... Maybe? Selection: 1 Building ✓ checking for file ‘/Users/jamesramsay/Documents/R/fda_work/fda/DESCRIPTION’ (437ms) ─ preparing ‘fda’: (5.8s) ✓ checking DESCRIPTION meta-information ... ─ checking for LF line-endings in source and make files and shell scripts (1.6s) ─ checking for empty or unneeded directories ─ building ‘fda_5.1.7.tar.gz’ Submitting file: /var/folders/sc/6zzfzqbs5w7dl8q5g18tlqfcgn/T//RtmpbcSyMD/fda_5.1.7.tar.gz File size: 102.9 Mb Ready to submit fda (5.1.7) to CRAN? 1: Not yet 2: Absolutely 3: U... Maybe? Selection: 2 Uploading package & comments Confirming submission Error in if (new_url$query$submit == "1") { : argument is of length zero In addition: Warning messages: 1: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored 2: In charToRaw(enc2utf8(val)) : argument should be a character vector of length 1 all but the first element will be ignored __ R-package-devel@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-package-devel