Re: (RADIATOR) radiator and ipass
Hi, You didn't say anything about the other parts of your config - special entries in your client clauses, special client clause for ipass, username character set definition, format you receive ipass client username requests etc. Regards, Tunde I. - Original Message - From: "Mike Blancas" <[EMAIL PROTECTED]> To: "Ayotunde Itayemi" <[EMAIL PROTECTED]> Cc: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, October 01, 2002 2:29 AM Subject: Re: (RADIATOR) radiator and ipass > Our setup is to proxy all iPass request to our iPass netserver using the > AuthBy RADIUS and Realm DEFAULT. My local accounts are handled by > different Realm and AuthBy clauses. This setup has been working for more > than 1 yr without any problems. In the bottom of my radius.cfg, I have the > following lines: > > > > Host ipass.netserver.ip > Secret > AuthPort 11812 > AcctPort 11813 > > > > Mike Blancas <[EMAIL PROTECTED]> > Mosaic Communications, Inc. > > On Mon, 30 Sep 2002, Ayotunde Itayemi wrote: > > > Hi All, > > > > Is there anybody on the list running ipass netserver and radiator? > > I am having problems with my config. I have installed both software but in order to get it to > > work properly, ipass specifies that the following lines should be added to all client clauses > > in the radiator config file: > > > > RewriteUsername s/^IPASS\/([^@]+)\@([^@]+)$/IPASS\/$1#$2\@myipass/ > > > > > > After having added the line above, I (assume) then need to add the character / to the UsernameCharset > > set in radiator so as to allow names of the form IPASS/username ? > > > > Default of ( a-zA-Z0-9\._@- ). I have tried ( UsernameCharset a-zA-Z0-9\._@-/) and ( UsernameCharset a-zA-Z0-9\._@-\/ ) > > > > But I noticed that when I do so, a request with the name of the form IPASS/username kills radiator. > > It just stops and even there is nothing in the log with a trace 4 option. > > > > Please I would liek someone to provide me with a working config and if possible a brief explanation > > of any area that is not too clear or standard. > > > > Regards, > > Tunde I. > > > > > > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
Re: (RADIATOR) radiator and ipass
Hello Tunde - Could you please send me a text copy of your configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening? regards Hugh On Monday, September 30, 2002, at 09:38 PM, Ayotunde Itayemi wrote: Hi All, Is there anybody on the list running ipass netserver and radiator? I am having problems with my config. I have installed both software but in order to get it to work properly, ipass specifies that the following lines should be added to all client clauses in the radiator config file: After having added the line above, I (assume) then need to add the character / to the UsernameCharset set in radiator so as to allow names of the form IPASS/username ? Default of ( a-zA-Z0-9\._@- ). I have tried ( UsernameCharset a-zA-Z0-9\._@-/) and ( UsernameCharset a-zA-Z0-9\._@-\/ ) But I noticed that when I do so, a request with the name of the form IPASS/username kills radiator. It just stops and even there is nothing in the log with a trace 4 option. Please I would liek someone to provide me with a working config and if possible a brief explanation of any area that is not too clear or standard. Regards, Tunde I. NB: I am travelling this week, so there may be delays in our correspondence. -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence.
Re: (RADIATOR) radiator and ipass
Our setup is to proxy all iPass request to our iPass netserver using the AuthBy RADIUS and Realm DEFAULT. My local accounts are handled by different Realm and AuthBy clauses. This setup has been working for more than 1 yr without any problems. In the bottom of my radius.cfg, I have the following lines: Host ipass.netserver.ip Secret AuthPort 11812 AcctPort 11813 Mike Blancas <[EMAIL PROTECTED]> Mosaic Communications, Inc. On Mon, 30 Sep 2002, Ayotunde Itayemi wrote: > Hi All, > > Is there anybody on the list running ipass netserver and radiator? > I am having problems with my config. I have installed both software but in order to >get it to > work properly, ipass specifies that the following lines should be added to all >client clauses > in the radiator config file: > > RewriteUsername s/^IPASS\/([^@]+)\@([^@]+)$/IPASS\/$1#$2\@myipass/ > > > After having added the line above, I (assume) then need to add the character / to >the UsernameCharset > set in radiator so as to allow names of the form IPASS/username ? > > Default of ( a-zA-Z0-9\._@- ). I have tried ( UsernameCharset a-zA-Z0-9\._@-/) and >( UsernameCharset a-zA-Z0-9\._@-\/ ) > > But I noticed that when I do so, a request with the name of the form IPASS/username >kills radiator. > It just stops and even there is nothing in the log with a trace 4 option. > > Please I would liek someone to provide me with a working config and if possible a >brief explanation > of any area that is not too clear or standard. > > Regards, > Tunde I. > > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
(RADIATOR) radiator and ipass
Hi All, Is there anybody on the list running ipass netserver and radiator? I am having problems with my config. I have installed both software but in order to get it to work properly, ipass specifies that the following lines should be added to all client clauses in the radiator config file: RewriteUsername s/^IPASS\/([^@]+)\@([^@]+)$/IPASS\/$1#$2\@myipass/ After having added the line above, I (assume) then need to add the character / to the UsernameCharset set in radiator so as to allow names of the form IPASS/username ? Default of ( a-zA-Z0-9\._@- ). I have tried ( UsernameCharset a-zA-Z0-9\._@-/) and ( UsernameCharset a-zA-Z0-9\._@-\/ ) But I noticed that when I do so, a request with the name of the form IPASS/username kills radiator. It just stops and even there is nothing in the log with a trace 4 option. Please I would liek someone to provide me with a working config and if possible a brief explanation of any area that is not too clear or standard. Regards, Tunde I.
Re: (RADIATOR) Radiator and iPass
Hello Vangelis - No you don't need IPassPerl, as the new IPass server just uses standard radius proxy. You will need a Client clause for inbound requests and an AuthBy RADIUS clause for outgoing requests. regards Hugh On Thu, 18 Apr 2002 21:34, Vangelis Kyriakakis wrote: > Hello, > > Do I have to install IPassPerl in order to do outbound roaming > using the new scheme with the AuthBy Radius proxy? > > thanks >Vangelis > > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
(RADIATOR) Radiator and iPass
Hello, Do I have to install IPassPerl in order to do outbound roaming using the new scheme with the AuthBy Radius proxy? thanks Vangelis === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
Re: (RADIATOR) Radiator and Ipass problem
Hi Chris, On Apr 25, 5:48pm, Chris Magnuson wrote: > Subject: (RADIATOR) Radiator and Ipass problem > I'm trying to compile the ipass module for use with the latest Radiator on > Linux, and getting this error. Any hints for me? > > The Ipass.so file seems to exist in the right placein the file tree... Did you get any warnings or messages during the compile phase? Looks a bit like there is a (new?) symbol in one of your libraries called ipass_debug. I presume it will be defined in one of the ipass libraries you got, but its nt being linked in by the IpassPerl makefile (which only links in -lip -lssl -lcrypto) What files do you have in your /usr/ipass/lib? Cheers. > > Thanks, > Chris > > [root@chooyu IpassPerl-1.3]# make test > PERL_DL_NONLAZY=1 /usr/bin/perl -I./blib/arch -I./blib/lib > -I/usr/lib/perl5/i586-linux/5.00405 -I/usr/lib/perl5 test.pl > 1..6 > Can't load './blib/arch/auto/Ipass/Ipass.so' for module Ipass: > ./blib/arch/auto/Ipass/Ipass.so: undefined symbol: ipass_debug at > /usr/lib/perl5/i586-linux/5.00405/DynaLoader.pm line 169. > > at test.pl line 19 > BEGIN failed--compilation aborted at test.pl line 19. > not ok 1 > make: *** [test_dynamic] Error 2 > > > === > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. >-- End of excerpt from Chris Magnuson -- Mike McCauley [EMAIL PROTECTED] Open System Consultants Pty. LtdUnix, Perl, Motif, C++, WWW 24 Bateman St Hampton, VIC 3188 Australia http://www.open.com.au Phone +61 3 9598-0985 Fax +61 3 9598-0955 Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, external, etc etc on Unix, Win95/8, NT, Rhapsody === To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
(RADIATOR) Radiator and Ipass problem
I'm trying to compile the ipass module for use with the latest Radiator on Linux, and getting this error. Any hints for me? The Ipass.so file seems to exist in the right placein the file tree... Thanks, Chris [root@chooyu IpassPerl-1.3]# make test PERL_DL_NONLAZY=1 /usr/bin/perl -I./blib/arch -I./blib/lib -I/usr/lib/perl5/i586-linux/5.00405 -I/usr/lib/perl5 test.pl 1..6 Can't load './blib/arch/auto/Ipass/Ipass.so' for module Ipass: ./blib/arch/auto/Ipass/Ipass.so: undefined symbol: ipass_debug at /usr/lib/perl5/i586-linux/5.00405/DynaLoader.pm line 169. at test.pl line 19 BEGIN failed--compilation aborted at test.pl line 19. not ok 1 make: *** [test_dynamic] Error 2 === To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.