Re: [RBW] 2.25 Thunder Burt on a Platypus?

[DavidP]

Christian,

Did you damage a rim or are you switching to a dyno hub?

To me there seems to be not much difference between Atlas and Cliffhangers. 
Both are fairly hefty with the Cliffhangers being wider (25mm vs 20mm 
internal). For a Platy, the difference in rim width isn't going to make a 
big impact as all tires that will fit on a Platy will be fine on an Atlas.

My Platy has Cliffhangers and I sometimes think they are a bit overkill for 
the 50mm tires I am using but the ~55g weight difference of the Atlas rims 
isn't worth the switch. If I was using 42mm or smaller tires I'd definitely 
want a narrower rim (Atlas, Quill, Dyad, etc.).

Looking forward to seeing your made over Platypus.

-Dave





On Monday, November 20, 2023 at 2:37:14 PM UTC-5 Justin Kennedy wrote:

> Also, not sure how I missed this, but Roman's 60cm Platypus on the Riv 
> Staff Bikes pages is sporting 2.25 Thunder Burts. Not sure what rims those 
> are mounted to, though, but they might be black Cliffhangers?  
>
> https://www.rivbike.com/blogs/news/romans-60cm-platypus-86-5cm-pbh
>
> On Monday, November 20, 2023 at 11:25:03 AM UTC-5 Lonnie wrote:
>
>> I love the 2.25 G-ones.  They work well on the neighborhood singletrack, 
>> but don't feel too slow on pavement.  But as I mentioned, they required 
>> swapping out the bottom bracket to keep the chain off the tire (when 
>> mounted on cliffhangers).  Had I known that would be the case, I would have 
>> gone with the 50mm gravel kings.  If I didn't already have cliffhangers, I 
>> might have gone with a slightly narrower rim.[image: Platy~.jpg]
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/d1a38b98-8fe9-4c22-841b-9b0a57d5c4acn%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Justin Kennedy]

Also, not sure how I missed this, but Roman's 60cm Platypus on the Riv 
Staff Bikes pages is sporting 2.25 Thunder Burts. Not sure what rims those 
are mounted to, though, but they might be black Cliffhangers?  

https://www.rivbike.com/blogs/news/romans-60cm-platypus-86-5cm-pbh

On Monday, November 20, 2023 at 11:25:03 AM UTC-5 Lonnie wrote:

> I love the 2.25 G-ones.  They work well on the neighborhood singletrack, 
> but don't feel too slow on pavement.  But as I mentioned, they required 
> swapping out the bottom bracket to keep the chain off the tire (when 
> mounted on cliffhangers).  Had I known that would be the case, I would have 
> gone with the 50mm gravel kings.  If I didn't already have cliffhangers, I 
> might have gone with a slightly narrower rim.[image: Platy~.jpg]
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ebfa8f73-6f59-4acf-91c0-67192d2bfd15n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Justin Kennedy]

Hi Christian et al.,

This was actually a question I posted for a friend of mine who was building 
up his Platty, and, long story short, the 2.25 Thunder Burts mounted to 
Cliffhangers do indeed fit the frame. Just barely, but they fit. I'll try 
to post some pics once he sends 'em. 

I have 2.25 G-Ones on my 60cm Platypus with plenty of clearance. They're 
mounted to Alex Adventurer2 rims, though, so a little narrower than 
Cliffhangers. 

FWIW, I talked to Rich at Riv about a year ago about Cliffhangers for a 
Platypus. He thought they were too wide for a Platy and suggested an Atlas 
or something similar. I ended up with the Adventurer2's which have been 
great. Plenty of evidence, though, that Cliffhangers work on Platypus 
frames. Whether they're "the way to go" or not is ultimately up to you. 

On Monday, November 20, 2023 at 9:04:57 AM UTC-5 Arthur Mayfield wrote:

> I’m currently building up my Platy 55 frame, so I don’t have a lot to go 
> on other than measuring clearances, but it looks like 50mm with any tread 
> might be about the limit. *Maybe* 55mm with smooth tread. I’m fitting 
> mine with 38mm and fenders for mostly paved roads. 
>
> On Monday, November 20, 2023 at 12:22:48 AM UTC-5 bei...@gmail.com wrote:
>
>> *1) *Perhaps needs its own thread, but are Cliffhangers the way to go 
>> for a Platy if you’re riding with more weight? I have Atlas now and at 
>> least need a new rim, but want to run 55mm tires and something durable for 
>> my 200lbs self plus some grocery’s and for sometimes riding it “where you 
>> shouldn’t” as grant states. Cliffhangers vs Dyads or something else?
>>
>> *1 A)* Anyone have experience with the RH Antelope Pass 55 slicks? Would 
>> it be a mistake to make the investment in the ultralights in Black like the 
>> crust build below just for the aesthetic, when this will be an around town, 
>> grocery and baby hauler bike?
>>
>> Considering those, Fleecer Ridge, or G One All Rounds to replace the 
>> current 50mm Maxxis Ramblers…
>> *[image: IMG_5571.jpeg]*
>>
>>
>> *2)*
>> *Justin*, curious to know if you pulled the trigger on the Thunder 
>> Burt’s? If so, how’s it work and what’s it look like, and if not, what’d 
>> you go with?
>>
>> *Lonnie, *are the 2.25 G Ones working well still? Send a pic?
>>
>> Thanks all,
>>
>> Christian in Boulder, CO
>>
>> On Thursday, October 19, 2023 at 3:22:07 PM UTC-6 Lonnie wrote:
>>
>>> I have Schwalbe G-one all around tires (29x2.25) on Cliffhangers on my 
>>> Platypus and they've been great.  Fairly fast rolling, but plenty of 
>>> traction for some loose trails.  The tires fit the frame fine, though I 
>>> have to deflate them about to get them around the V-brakes.  The unexpected 
>>> issue I ran into involved the chain being too close to the tire.  Drive 
>>> train is old sugino touring triple and 9-sp cassette.  When in the granny 
>>> ring and biggest two cassette cogs and when riding rougher trails, the 
>>> chain would hit the tire and get sucked in between the tire and the 
>>> chainstay.  This never happened on smoother roads.
>>>
>>> I eventually bought the widest (and offset) Shimano bottom bracket that 
>>> Riv sells.  That seems to have fixed the problem, even on the rough 
>>> trails.  
>>>
>>> On Wednesday, October 18, 2023 at 6:58:34 AM UTC-5 DavidP wrote:
>>>
 I have a bike with a 29x2.25 Thunder Burt on an i29mm rim, on which the 
 casing measures wider than the knobs and is 56mm / 2.2" @ ~20psi. 
 Variances 
 in individual tires aside that should be a good max as the Cliffhangers 
 are 
 i25mm. I'm pretty sure this would work on my Platypus (60cm) if I didn't 
 have fenders installed which limit me to a 50mm tire.

 -Dave

 On Tuesday, October 17, 2023 at 5:54:37 PM UTC-4 penne...@gmail.com 
 wrote:

> Hi Justin,
> FWIW, the April 28 email newsletter featured a 60cm web special platy 
> with 2.3" Teravail Ehlines. Will said: "It clears easily, although I 
> wouldn't go any bigger. I suspect these tires are measured knob to knob, 
> because calipers showed them as closer to 2.1 than 2.3. Still good!"
> Mack 
>
> On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com 
> wrote:
>
>> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
>> wife’s 55 with Cliffhanger rims and there is no room to spare. 
>> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com 
>> wrote:
>>
>>> No specific experience mounting that combo but I can tell you that 
>>> 2.25" tires on Cliffhanger rims, for me, measured 60mm. If you've got 
>>> calipers, you could check the spacing between tubes and get an idea 
>>> from 
>>> that.
>>>
>>> On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
>>> wrote:
>>>
 I know it's beyond the official max tire size but wondering if 
 anyone has experience with big ol' tires on your Platy. Specifically, 

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Arthur Mayfield]

I’m currently building up my Platy 55 frame, so I don’t have a lot to go on 
other than measuring clearances, but it looks like 50mm with any tread 
might be about the limit. *Maybe* 55mm with smooth tread. I’m fitting mine 
with 38mm and fenders for mostly paved roads. 

On Monday, November 20, 2023 at 12:22:48 AM UTC-5 bei...@gmail.com wrote:

> *1) *Perhaps needs its own thread, but are Cliffhangers the way to go for 
> a Platy if you’re riding with more weight? I have Atlas now and at least 
> need a new rim, but want to run 55mm tires and something durable for my 
> 200lbs self plus some grocery’s and for sometimes riding it “where you 
> shouldn’t” as grant states. Cliffhangers vs Dyads or something else?
>
> *1 A)* Anyone have experience with the RH Antelope Pass 55 slicks? Would 
> it be a mistake to make the investment in the ultralights in Black like the 
> crust build below just for the aesthetic, when this will be an around town, 
> grocery and baby hauler bike?
>
> Considering those, Fleecer Ridge, or G One All Rounds to replace the 
> current 50mm Maxxis Ramblers…
> *[image: IMG_5571.jpeg]*
>
>
> *2)*
> *Justin*, curious to know if you pulled the trigger on the Thunder 
> Burt’s? If so, how’s it work and what’s it look like, and if not, what’d 
> you go with?
>
> *Lonnie, *are the 2.25 G Ones working well still? Send a pic?
>
> Thanks all,
>
> Christian in Boulder, CO
>
> On Thursday, October 19, 2023 at 3:22:07 PM UTC-6 Lonnie wrote:
>
>> I have Schwalbe G-one all around tires (29x2.25) on Cliffhangers on my 
>> Platypus and they've been great.  Fairly fast rolling, but plenty of 
>> traction for some loose trails.  The tires fit the frame fine, though I 
>> have to deflate them about to get them around the V-brakes.  The unexpected 
>> issue I ran into involved the chain being too close to the tire.  Drive 
>> train is old sugino touring triple and 9-sp cassette.  When in the granny 
>> ring and biggest two cassette cogs and when riding rougher trails, the 
>> chain would hit the tire and get sucked in between the tire and the 
>> chainstay.  This never happened on smoother roads.
>>
>> I eventually bought the widest (and offset) Shimano bottom bracket that 
>> Riv sells.  That seems to have fixed the problem, even on the rough 
>> trails.  
>>
>> On Wednesday, October 18, 2023 at 6:58:34 AM UTC-5 DavidP wrote:
>>
>>> I have a bike with a 29x2.25 Thunder Burt on an i29mm rim, on which the 
>>> casing measures wider than the knobs and is 56mm / 2.2" @ ~20psi. Variances 
>>> in individual tires aside that should be a good max as the Cliffhangers are 
>>> i25mm. I'm pretty sure this would work on my Platypus (60cm) if I didn't 
>>> have fenders installed which limit me to a 50mm tire.
>>>
>>> -Dave
>>>
>>> On Tuesday, October 17, 2023 at 5:54:37 PM UTC-4 penne...@gmail.com 
>>> wrote:
>>>
 Hi Justin,
 FWIW, the April 28 email newsletter featured a 60cm web special platy 
 with 2.3" Teravail Ehlines. Will said: "It clears easily, although I 
 wouldn't go any bigger. I suspect these tires are measured knob to knob, 
 because calipers showed them as closer to 2.1 than 2.3. Still good!"
 Mack 

 On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com 
 wrote:

> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
> wife’s 55 with Cliffhanger rims and there is no room to spare. 
> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com 
> wrote:
>
>> No specific experience mounting that combo but I can tell you that 
>> 2.25" tires on Cliffhanger rims, for me, measured 60mm. If you've got 
>> calipers, you could check the spacing between tubes and get an idea from 
>> that.
>>
>> On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
>> wrote:
>>
>>> I know it's beyond the official max tire size but wondering if 
>>> anyone has experience with big ol' tires on your Platy. Specifically, a 
>>> 29'er 2.25 Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. 
>>> Thanks!  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "RBW Owners Bunch" group.
>>> To unsubscribe from this group and stop receiving emails from it, 
>>> send an email to rbw-owners-bun...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>>
>>
>> -- 
>> Ted Wood < ted.l...@gmail.com >
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Lonnie]

I have Schwalbe G-one all around tires (29x2.25) on Cliffhangers on my 
Platypus and they've been great.  Fairly fast rolling, but plenty of 
traction for some loose trails.  The tires fit the frame fine, though I 
have to deflate them about to get them around the V-brakes.  The unexpected 
issue I ran into involved the chain being too close to the tire.  Drive 
train is old sugino touring triple and 9-sp cassette.  When in the granny 
ring and biggest two cassette cogs and when riding rougher trails, the 
chain would hit the tire and get sucked in between the tire and the 
chainstay.  This never happened on smoother roads.

I eventually bought the widest (and offset) Shimano bottom bracket that Riv 
sells.  That seems to have fixed the problem, even on the rough trails.  

On Wednesday, October 18, 2023 at 6:58:34 AM UTC-5 DavidP wrote:

> I have a bike with a 29x2.25 Thunder Burt on an i29mm rim, on which the 
> casing measures wider than the knobs and is 56mm / 2.2" @ ~20psi. Variances 
> in individual tires aside that should be a good max as the Cliffhangers are 
> i25mm. I'm pretty sure this would work on my Platypus (60cm) if I didn't 
> have fenders installed which limit me to a 50mm tire.
>
> -Dave
>
> On Tuesday, October 17, 2023 at 5:54:37 PM UTC-4 penne...@gmail.com wrote:
>
>> Hi Justin,
>> FWIW, the April 28 email newsletter featured a 60cm web special platy 
>> with 2.3" Teravail Ehlines. Will said: "It clears easily, although I 
>> wouldn't go any bigger. I suspect these tires are measured knob to knob, 
>> because calipers showed them as closer to 2.1 than 2.3. Still good!"
>> Mack 
>>
>> On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com wrote:
>>
>>> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
>>> wife’s 55 with Cliffhanger rims and there is no room to spare. 
>>> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com 
>>> wrote:
>>>
 No specific experience mounting that combo but I can tell you that 
 2.25" tires on Cliffhanger rims, for me, measured 60mm. If you've got 
 calipers, you could check the spacing between tubes and get an idea from 
 that.

 On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
 wrote:

> I know it's beyond the official max tire size but wondering if anyone 
> has experience with big ol' tires on your Platy. Specifically, a 29'er 
> 2.25 
> Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!  
>
> -- 
> You received this message because you are subscribed to the Google 
> Groups "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to rbw-owners-bun...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
>  
> 
> .
>


 -- 
 Ted Wood < ted.l...@gmail.com >

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/bb46f743-5eb0-4df8-96d8-c8bb51e32636n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Stephen]

Hey Justin,

I have a set of 2.25 schwalbe g-ones sitting around if you want to do a 
test fit. Not quite as knobby so maybe not informative enough. Fit fine on 
my appaloosa w cliffhangers, again not a perfect comparison. 

On Wednesday, October 18, 2023 at 7:58:34 AM UTC-4 RBW Owners Bunch wrote:

> I have a bike with a 29x2.25 Thunder Burt on an i29mm rim, on which the 
> casing measures wider than the knobs and is 56mm / 2.2" @ ~20psi. Variances 
> in individual tires aside that should be a good max as the Cliffhangers are 
> i25mm. I'm pretty sure this would work on my Platypus (60cm) if I didn't 
> have fenders installed which limit me to a 50mm tire.
>
> -Dave
>
> On Tuesday, October 17, 2023 at 5:54:37 PM UTC-4 penne...@gmail.com wrote:
>
>> Hi Justin,
>> FWIW, the April 28 email newsletter featured a 60cm web special platy 
>> with 2.3" Teravail Ehlines. Will said: "It clears easily, although I 
>> wouldn't go any bigger. I suspect these tires are measured knob to knob, 
>> because calipers showed them as closer to 2.1 than 2.3. Still good!"
>> Mack 
>>
>> On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com wrote:
>>
>>> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
>>> wife’s 55 with Cliffhanger rims and there is no room to spare. 
>>> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com 
>>> wrote:
>>>
 No specific experience mounting that combo but I can tell you that 
 2.25" tires on Cliffhanger rims, for me, measured 60mm. If you've got 
 calipers, you could check the spacing between tubes and get an idea from 
 that.

 On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
 wrote:

> I know it's beyond the official max tire size but wondering if anyone 
> has experience with big ol' tires on your Platy. Specifically, a 29'er 
> 2.25 
> Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!  
>
> -- 
> You received this message because you are subscribed to the Google 
> Groups "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to rbw-owners-bun...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
>  
> 
> .
>


 -- 
 Ted Wood < ted.l...@gmail.com >

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2f84983c-d2df-492c-9cdc-37959bc68709n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[DavidP]

I have a bike with a 29x2.25 Thunder Burt on an i29mm rim, on which the 
casing measures wider than the knobs and is 56mm / 2.2" @ ~20psi. Variances 
in individual tires aside that should be a good max as the Cliffhangers are 
i25mm. I'm pretty sure this would work on my Platypus (60cm) if I didn't 
have fenders installed which limit me to a 50mm tire.

-Dave

On Tuesday, October 17, 2023 at 5:54:37 PM UTC-4 penne...@gmail.com wrote:

> Hi Justin,
> FWIW, the April 28 email newsletter featured a 60cm web special platy with 
> 2.3" Teravail Ehlines. Will said: "It clears easily, although I wouldn't go 
> any bigger. I suspect these tires are measured knob to knob, because 
> calipers showed them as closer to 2.1 than 2.3. Still good!"
> Mack 
>
> On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com wrote:
>
>> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
>> wife’s 55 with Cliffhanger rims and there is no room to spare. 
>> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com 
>> wrote:
>>
>>> No specific experience mounting that combo but I can tell you that 2.25" 
>>> tires on Cliffhanger rims, for me, measured 60mm. If you've got calipers, 
>>> you could check the spacing between tubes and get an idea from that.
>>>
>>> On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
>>> wrote:
>>>
 I know it's beyond the official max tire size but wondering if anyone 
 has experience with big ol' tires on your Platy. Specifically, a 29'er 
 2.25 
 Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!  

 -- 
 You received this message because you are subscribed to the Google 
 Groups "RBW Owners Bunch" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to rbw-owners-bun...@googlegroups.com.
 To view this discussion on the web visit 
 https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
  
 
 .

>>>
>>>
>>> -- 
>>> Ted Wood < ted.l...@gmail.com >
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/77492374-e6be-4a03-a6a9-6a24d9c6db70n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Mack Penner]

Hi Justin,
FWIW, the April 28 email newsletter featured a 60cm web special platy with 
2.3" Teravail Ehlines. Will said: "It clears easily, although I wouldn't go 
any bigger. I suspect these tires are measured knob to knob, because 
calipers showed them as closer to 2.1 than 2.3. Still good!"
Mack 

On Tuesday, October 17, 2023 at 3:29:05 PM UTC-6 fra...@gmail.com wrote:

> I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my 
> wife’s 55 with Cliffhanger rims and there is no room to spare. 
> On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com wrote:
>
>> No specific experience mounting that combo but I can tell you that 2.25" 
>> tires on Cliffhanger rims, for me, measured 60mm. If you've got calipers, 
>> you could check the spacing between tubes and get an idea from that.
>>
>> On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
>> wrote:
>>
>>> I know it's beyond the official max tire size but wondering if anyone 
>>> has experience with big ol' tires on your Platy. Specifically, a 29'er 2.25 
>>> Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "RBW Owners Bunch" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to rbw-owners-bun...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>>
>>
>> -- 
>> Ted Wood < ted.l...@gmail.com >
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/b72d0af2-69c1-41e6-bf06-45cb84776939n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Ryan Frahm]

I would say it isn’t likely. I have the Soma Cazadero 700x50mm on my wife’s 
55 with Cliffhanger rims and there is no room to spare. 
On Tuesday, October 17, 2023 at 7:10:49 AM UTC-7 ted.l...@gmail.com wrote:

> No specific experience mounting that combo but I can tell you that 2.25" 
> tires on Cliffhanger rims, for me, measured 60mm. If you've got calipers, 
> you could check the spacing between tubes and get an idea from that.
>
> On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy  
> wrote:
>
>> I know it's beyond the official max tire size but wondering if anyone has 
>> experience with big ol' tires on your Platy. Specifically, a 29'er 2.25 
>> Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!  
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bun...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
>>  
>> 
>> .
>>
>
>
> -- 
> Ted Wood < ted.l...@gmail.com >
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/aed6583f-b5ff-43cd-b3fd-5f55c3bf37f8n%40googlegroups.com.

Re: [RBW] 2.25 Thunder Burt on a Platypus?

[Ted W]

No specific experience mounting that combo but I can tell you that 2.25"
tires on Cliffhanger rims, for me, measured 60mm. If you've got calipers,
you could check the spacing between tubes and get an idea from that.

On Tue, Oct 17, 2023 at 10:04 AM Justin Kennedy 
wrote:

> I know it's beyond the official max tire size but wondering if anyone has
> experience with big ol' tires on your Platy. Specifically, a 29'er 2.25
> Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks!
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com
> 
> .
>


-- 
Ted Wood < ted.l.w...@gmail.com >

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/CANCvShpbavQqd5rd25P4AK2e%2BFjg8e42i17uVE4LrZz9WVjneg%40mail.gmail.com.

[RBW] 2.25 Thunder Burt on a Platypus?

[Justin Kennedy]

I know it's beyond the official max tire size but wondering if anyone has 
experience with big ol' tires on your Platy. Specifically, a 29'er 2.25 
Thunder Burt (mounted on a Cliffhanger) on a 60cm Platypus. Thanks! 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/485c9ac2-2e2b-41ef-b9fb-303ab0cc7158n%40googlegroups.com.