Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-07 Thread Chrysanthos Kanellopoulos
Very nice! Always happy to see a new all metal tank. They are more 
straightforward, SIMPLER to build and seem they can last longer. You know, 
these suspensions are going to rock if you hit the gas over a bumpy terrain. ! 
Are the tracks' pads also aluminium? I didn't remember
Chrys 
  - Original Message - 
  From: Derek Engelhaupt 
  To: rctankcombat@googlegroups.com 
  Sent: Sunday, March 07, 2010 5:34 AM
  Subject: Re: [TANKS] Re: M1A1 Abrams -- Progress


  Really struggling with the paintball magazine.  So far I think I'm on about 
the 6th prototype.  
  I'm gonna work on it some more tonight.  Once I get that done, I can finish 
the turret electronics 
  up.  Still having some suspension issues.  It's holding the weight, but not 
rebounding the way it 
  should.  That's also on the list.  Once that's fixed I can take it out for a 
test drive.  Ahhh, the garage
  wasn't that cold today.  It was at least above freezing today (40 degrees).

  Derek
  T065


  On Sat, Mar 6, 2010 at 9:15 PM, Mark_123521  
wrote:

Derek:

I tapped that dryer on the previous run, because both RC channels were
backwards.
I was surprised it moved.

Blew the budget today - bought 4 12 volt 12 AH batteries.
That will make 24 volts @ 24 Amp Hours.

Next, I need one of those spread spectrum 2.4 ghz , 6 channel radios.

Hows your plastic tank going? I dont know how you do it in a cold
garage!!

Mark


On Mar 6, 8:57 pm, Derek Engelhaupt  wrote:
> What did the dryer do to you that you had to beat on it like that?  :)
> Nice work.  Seems like a nice quiet runner.
>
> Derek
> T065
>

> On Sat, Mar 6, 2010 at 8:49 PM, Mark_123521 
wrote:

>
>
>
> > Patron:
> >   Yah, its geared to go 5.5 MPH fully loaded.
> > Actual calculations are using the motors no load speed of 550RPM and
> > gives 5.8 MPH, but I know the motors going to slow down when running
> > loaded, and I hope to get 5.5 ??
>
> > Mark
>
> > On Mar 4, 9:55 pm, Patron  wrote:
> > > Looking good! Is the 5.5 fully built?
>
> > > On Thu, 4 Mar 2010 21:38, Mark_123521 wrote:
> > > > Got a track on one side!
>
> > > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0778.jpg
> > > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0773.jpg
>
> > > > Video of track moving:
> > > > Its running directly off a 6 volt battery.
> > > > Hull is blocked from moving forward and track is skidding on the
> > > > concrete.
> > > > It is drawing 10 amps. The track running free (lifted off the 
ground)
> > > > draws 3.5 amps.
> > > > Hull as shown weighs 50 pounds + 7 pounds for the single track.
> > > >http://s192.photobucket.com/albums/z65/mm123521/?action=view¤t=...
>
> > > > Mark
>
> > > > --
> > > > You are currently subscribed to the "R/C Tank Combat" group.
> > > > To post a message, send email to rctankcombat@googlegroups.com
> > > > To unsubscribe, send email to
> > rctankcombat-unsubscr...@googlegroups.com
> > > > Visit the group athttp://groups.google.com/group/rctankcombat
>
> > > "We have a little saying in Massachusetts. "Maybe one day you'll get
> > > horribly sick and die".- Hide quoted text -
>
> > > - Show quoted text -
>
> > --
> > You are currently subscribed to the "R/C Tank Combat" group.
> > To post a message, send email to rctankcombat@googlegroups.com
> > To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com

> > Visit the group athttp://groups.google.com/group/rctankcombat- Hide 
quoted text -

>
> - Show quoted text -

--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat



  -- 
  You are currently subscribed to the "R/C Tank Combat" group.
  To post a message, send email to rctankcombat@googlegroups.com
  To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
  Visit the group at http://groups.google.com/group/rctankcombat

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-07 Thread Patron

That is a thing of Beauty, sir. Congratulations.
On Sun, 7 Mar 2010 11:51, Mark_123521 wrote:


Ran the heck out of the tank hull.
The motors/ controler/ wireing dint even get warm!
Did a range test on radio, 100 yards and no problem.
Goes over the street curb with ease.

Tank running around in front yard:
http://www.youtube.com/watch?v=7w2CrUYRtnk
http://www.youtube.com/watch?v=aRlCCT8tGsE

Mark

--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
"Inside the mind fucking, meat grinding, unwinding, soul sucking factory 
of all your dreams"


--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat


Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-07 Thread Leif Westermark
It runs beatiful.
how much does it weight so far?
Leif.
- Original Message - 
From: "Mark_123521" 
To: "R/C Tank Combat" 
Sent: Sunday, March 07, 2010 5:51 PM
Subject: [TANKS] Re: M1A1 Abrams -- Progress


> 
> Ran the heck out of the tank hull.
> The motors/ controler/ wireing dint even get warm!
> Did a range test on radio, 100 yards and no problem.
> Goes over the street curb with ease.
> 
> Tank running around in front yard:
> http://www.youtube.com/watch?v=7w2CrUYRtnk
> http://www.youtube.com/watch?v=aRlCCT8tGsE
> 
> Mark
> 
> -- 
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat


Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-07 Thread OdysseySlipways
damn, i wish i had dsl to see these videos
 
Chris,
_Odyssey  Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) 

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-06 Thread Derek Engelhaupt
Really struggling with the paintball magazine.  So far I think I'm on about
the 6th prototype.
I'm gonna work on it some more tonight.  Once I get that done, I can finish
the turret electronics
up.  Still having some suspension issues.  It's holding the weight, but not
rebounding the way it
should.  That's also on the list.  Once that's fixed I can take it out for a
test drive.  Ahhh, the garage
wasn't that cold today.  It was at least above freezing today (40 degrees).

Derek
T065

On Sat, Mar 6, 2010 at 9:15 PM, Mark_123521 wrote:

> Derek:
>
> I tapped that dryer on the previous run, because both RC channels were
> backwards.
> I was surprised it moved.
>
> Blew the budget today - bought 4 12 volt 12 AH batteries.
> That will make 24 volts @ 24 Amp Hours.
>
> Next, I need one of those spread spectrum 2.4 ghz , 6 channel radios.
>
> Hows your plastic tank going? I dont know how you do it in a cold
> garage!!
>
> Mark
>
> On Mar 6, 8:57 pm, Derek Engelhaupt  wrote:
> > What did the dryer do to you that you had to beat on it like that?  :)
> > Nice work.  Seems like a nice quiet runner.
> >
> > Derek
> > T065
> >
> > On Sat, Mar 6, 2010 at 8:49 PM, Mark_123521 <
> gatlinggunm...@sbcglobal.net>wrote:
> >
> >
> >
> > > Patron:
> > >   Yah, its geared to go 5.5 MPH fully loaded.
> > > Actual calculations are using the motors no load speed of 550RPM and
> > > gives 5.8 MPH, but I know the motors going to slow down when running
> > > loaded, and I hope to get 5.5 ??
> >
> > > Mark
> >
> > > On Mar 4, 9:55 pm, Patron  wrote:
> > > > Looking good! Is the 5.5 fully built?
> >
> > > > On Thu, 4 Mar 2010 21:38, Mark_123521 wrote:
> > > > > Got a track on one side!
> >
> > > > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0778.jpg
> > > > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0773.jpg
> >
> > > > > Video of track moving:
> > > > > Its running directly off a 6 volt battery.
> > > > > Hull is blocked from moving forward and track is skidding on the
> > > > > concrete.
> > > > > It is drawing 10 amps. The track running free (lifted off the
> ground)
> > > > > draws 3.5 amps.
> > > > > Hull as shown weighs 50 pounds + 7 pounds for the single track.
> > > > >http://s192.photobucket.com/albums/z65/mm123521/?action=view¤t=...
> >
> > > > > Mark
> >
> > > > > --
> > > > > You are currently subscribed to the "R/C Tank Combat" group.
> > > > > To post a message, send email to rctankcombat@googlegroups.com
> > > > > To unsubscribe, send email to
> > > rctankcombat-unsubscr...@googlegroups.com
> > > > > Visit the group athttp://groups.google.com/group/rctankcombat
> >
> > > > "We have a little saying in Massachusetts. "Maybe one day you'll get
> > > > horribly sick and die".- Hide quoted text -
> >
> > > > - Show quoted text -
> >
> > > --
> > > You are currently subscribed to the "R/C Tank Combat" group.
> > > To post a message, send email to rctankcombat@googlegroups.com
> > > To unsubscribe, send email to
> rctankcombat-unsubscr...@googlegroups.com
> > > Visit the group athttp://groups.google.com/group/rctankcombat- Hide
> quoted text -
> >
> > - Show quoted text -
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-06 Thread Derek Engelhaupt
What did the dryer do to you that you had to beat on it like that?  :)
Nice work.  Seems like a nice quiet runner.

Derek
T065

On Sat, Mar 6, 2010 at 8:49 PM, Mark_123521 wrote:

> Patron:
>   Yah, its geared to go 5.5 MPH fully loaded.
> Actual calculations are using the motors no load speed of 550RPM and
> gives 5.8 MPH, but I know the motors going to slow down when running
> loaded, and I hope to get 5.5 ??
>
> Mark
>
> On Mar 4, 9:55 pm, Patron  wrote:
> > Looking good! Is the 5.5 fully built?
> >
> >
> >
> >
> >
> > On Thu, 4 Mar 2010 21:38, Mark_123521 wrote:
> > > Got a track on one side!
> >
> > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0778.jpg
> > >http://i192.photobucket.com/albums/z65/mm123521/HPIM0773.jpg
> >
> > > Video of track moving:
> > > Its running directly off a 6 volt battery.
> > > Hull is blocked from moving forward and track is skidding on the
> > > concrete.
> > > It is drawing 10 amps. The track running free (lifted off the ground)
> > > draws 3.5 amps.
> > > Hull as shown weighs 50 pounds + 7 pounds for the single track.
> > >http://s192.photobucket.com/albums/z65/mm123521/?action=view¤t=...
> >
> > > Mark
> >
> > > --
> > > You are currently subscribed to the "R/C Tank Combat" group.
> > > To post a message, send email to rctankcombat@googlegroups.com
> > > To unsubscribe, send email to
> rctankcombat-unsubscr...@googlegroups.com
> > > Visit the group athttp://groups.google.com/group/rctankcombat
> >
> > "We have a little saying in Massachusetts. "Maybe one day you'll get
> > horribly sick and die".- Hide quoted text -
> >
> > - Show quoted text -
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: M1A1 Abrams -- Progress

2010-03-04 Thread Gregory Kampjes
Looking good.
Just a suggestion, I've generally had a better experience with watching
YouTube videos, as they load a lot faster. Also consider having the camera
fixed, the video was a bit shaky at times.
Regardless, the progress looks good.

-Gregory

On Fri, Mar 5, 2010 at 3:45 PM, Mark_123521 wrote:

>
> Another video:
> It is 16 MB -- may take a while to load
> The drive gear ratio should produce 5.5 MPH
>
>
> http://s192.photobucket.com/albums/z65/mm123521/?action=view¤t=HPIM0774.flv
>
> Mark
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat