[RE-wrenches] Whisper Parts
If anyone has a Whisper 100 (H40) controller, a good EZ WIRE would do, please contact me off list Jeremy All solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] AC Coupling Situation
Wrenches, Here is my situation: GT string inverter - 3 strings of mods, 10KW DC. We need to reduce the PV when the grid is down as to not overload the AC coupled inverters. Is there a good way to limit PV input like shunt off some power or short part of the array? (part) I was first thinking of dropping off 2 of the three strings, but that would not leave enough input for the critical loads. Has anyone done such a thing? Jeremy All Solar CO- USA Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Fw: Anyone recognize this turbine?
Pretty sure its 2.5 I thought they had a Whisper originally. Pete Austin, If you're out there, this is Scott's Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: Chris Worcester ch...@solarwindworks.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sun, 24 Feb 2013 09:52:27 To: al...@positiveenergysolar.com; 'RE-wrenches're-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: Re: [RE-wrenches] Fw: Anyone recognize this turbine? ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Fw: Anyone recognize this turbine?
Aeromax's Lakota it is! Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: Chris Worcester ch...@solarwindworks.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sun, 24 Feb 2013 09:52:27 To: al...@positiveenergysolar.com; 'RE-wrenches're-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: Re: [RE-wrenches] Fw: Anyone recognize this turbine? ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Fw: Anyone recognize this turbine?
I forgot about those! This one has some type of controller / diversion set up however. I have a feeling the blades were changed along with a bunch of other junk installed. Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: bob ellison reelli...@gmail.com Date: Sat, 23 Feb 2013 21:14:38 To: allso...@scswifi.net; 'RE-wrenches're-wrenches@lists.re-wrenches.org Subject: RE: [RE-wrenches] Fw: Anyone recognize this turbine? Windseeker 500 rebladed From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeremy Rodriguez- All Solar Inc. Sent: Saturday, February 23, 2013 6:41 PM Cc: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Fw: Anyone recognize this turbine? Sent via BlackBerry. Sorry for typos and shorthand! _ From: All Solar Inc. allso...@live.com Date: Sat, 23 Feb 2013 16:19:06 -0700 To: All Solar, Inc.allso...@scswifi.net Subject: FW: Anyone recognize this turbine? _ From: allso...@live.com To: re-wrenches@lists.re-wrenches.org Subject: Anyone recognize this turbine? Date: Sat, 23 Feb 2013 16:14:35 -0700 It appears to have Air (tm) blades,but I am trying to get some info to possibly repair it. ALL SOLAR INC. Jeremy Rodriguez _ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2899 / Virus Database: 2639/6124 - Release Date: 02/22/13 ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Anyone Able To Contact SWWP?
Has anyone been in touch with Southwest Windpower lately? We are trying to order a replacement part. No Luck. We have left numerous messages. Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] generator suggestions
Check out Gillette Generators Made in Indiana Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: toddc...@finestplanet.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Tue, 29 Jan 2013 19:39:43 To: RE-wrenchesre-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] generator suggestions ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Battery Trays and the NEC
Hi I have an inspector requesting info on Surrette 5000 series batteries. I have told him they are dual container and that there is not a listed enclosure for them. In fact I see no mention in the code book about requirement for a listed enclosure, only that the tray must be able to resist acid. Since they are dual container, will there ever be a chance of leakage? Maybe someone has some documentation on this. Surrette Rep? Thanks Jeremy @ All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Trace Parts - colorado
Hello Does anyone know if the One Stop Cop shop in Colorado Springs still repairs inverters? I just spoke with a client who may need an AC board for an SW. Maybe best to just upgrade him to an OB! The SW will start the genny automatically, but he must stop it manually. (AC board has the relays correct?). He has an Onan genset, which sounds like it may be 3 Or 4 wire start. Also thought of maybe a Solar Converters auto gen start module or equivelant so he could still use the inverter, as is. Any recommendations would be helpful. Jeremy All Solar Penrose,CO Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Point of Connection 705.12D2 Exception
Wrenches, Since the XW6048 calls for a 60A breaker to feed the inverter input and we are connecting back to the load side of a 200A panel is this correct. 6000÷240=25X1.25=31.25A. We cannot exceed a 30A breaker? Help me understand this. Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Point of Connection 705.12D2 Exception
Ok, so 35A min., but what about maximum? A 200A mains panels allows 120% max back feed correct? Confused. Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: John Berdner john.berd...@solaredge.com Date: Sun, 30 Dec 2012 23:54:17 To: allso...@scswifi.netallso...@scswifi.net; RE-wrenchesre-wrenches@lists.re-wrenches.org Subject: RE: [RE-wrenches] Point of Connection 705.12D2 Exception Jeremy: 31.25 is the minimum allowable Ampacity (25 Amps continuous) so a 35 Amp breaker would be the minimum size per Code. The inverter may have a higher pass through rating to support the loads and so is likely the reason a 60 Amp breaker is specified. The pass through rating is typically based on the size of the isolation relay and is usually higher than the inverter's continuous power rating. Best Regards, John Berdner General Manager, North America 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3201 ext 747 M: 530.277.4894 -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeremy Rodriguez- All Solar Inc. Sent: Sunday, December 30, 2012 10:35 AM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Point of Connection 705.12D2 Exception Wrenches, Since the XW6048 calls for a 60A breaker to feed the inverter input and we are connecting back to the load side of a 200A panel is this correct. 6000÷240=25X1.25=31.25A. We cannot exceed a 30A breaker? Help me understand this. Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for the use of the individual or entity who is the intended recipient and may contain information that is privileged, confidential and exempt from disclosure or any type of use under applicable law. If the reader of this e-mail is not the intended recipient, or the employee, agent, or representative responsible for delivering the e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this e-mail is strictly prohibited. If you have received this e-mail in error, please reply immediately to the sender. P Please think of the environment before printing this email ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Point of Connection 705.12D2 Exception
William, They are using the 2011 code, so we should be good. 705.12D2 exception is a little confusing at first, but I got it. Jeremy Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Magnum MS 4448 AE issues
We have installed 3 Systreams in off grid settings with the Whisper 500 DC dump load (from SWWP) with good results. Used 2 Morningstar TS 60's, one set a little lower, as a secondary diversion (per code) in case the other fails. I have an SW Plus set up this way at our office, and the others use VFX inverters. All with OB transformers and the Skystream AC coupled of course. DC dumping with the Tristar is modulated and does not affect the AC at all. My Skystream has been modified by SWWP to reduce the 5 min. delay to about 30 seconds, but they do not want to change the others. This is ok if you have PV as well. Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: Howie Michaelson ho...@suncatchervt.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sun, 23 Dec 2012 10:45:33 To: RE-wrenchesre-wrenches@lists.re-wrenches.org Reply-To: ho...@catamountsolar.com, RE-wrenches re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Magnum MS 4448 AE issues Hi All, I am trying to help my brother-in-law figure out if he can continue using his Magnum MS 4448 AE in his now off-grid home in Nova Scotia which we installed about 3 years ago as at the time a battery backup inverter. I would preface the following with the information that he is a very knowledgeable/hands on physicist (chair of the Physics department at Dalhousie U. in Halifax, as well as an intrepid sailor having sailed all over the world in 2 different sailboats he built himself). I mention this to explain that he is very capable and understands the inner workings of his equipment much better than most wrenches I know (and certainly me). About a year ago he installed a SkyStream 3.7 to add to the roughly 3 kW of solar on an FM80, and then a short time later disconnected himself from the grid. He immediately started having problems with the Skystream regularly disconnecting from his system and shutting down, then reconnecting and cycling off again, were as there hadn't been a problem while grid-tied. After much investigation and conversation with SW WindPower tech support and some software patches from them, things improved somewhat. But the regular disconnections continued. Since then he has spent a great deal of time on the phone with Magnum's tech support but they have not been able to answer his more technical questions. The best they've offered is to have him send the inverter in, but of course that is now not practical. The basic problem seems to be the voltage regulation during loading and unloading of the inverter (even with medium sized loads). He tried to get an internal wiring diagram and/or service manual from Magnum with no luck. He has not been able to get through to any engineers that would be able to answer his more technical questions. He is trying to figure out if there are any internal set points that he can adjust or components that can use tweaking. He has looked at the wave form with a scope and would like to see if there are changes that he can make to the electronics to allow for better regulation. Here is what he has written me: Here is my report on the Magnum MS4448AE observing the AC output with a Fluke 189, measuring the max and min values in slow mode (not it's fast mode which would look at spikes for short times): I have checked several water heater elements running on 240 V (they are between 2000 and 2500 Watts - immersion heaters). When switching any one of them on, the voltage drops from around 240V to 197 V on average, sometimes going as low as 170 V. These are serious drops, the lights dim drastically and the radio may cut out for .5 s or so! Switching the thermal heaters off again raise the output voltage to 271 V sometimes reaching 282 V. The battery bank during those test were at 53 V at the DC input side of the inverter, measured at the inverter. The voltage drop for the DC was around 1 V DC. The battery bank is a 800 AH (Rolls S530) with 2/0 copper cables 5 - 6 ft inverter cables. We had great wind yesterday and I had to switch to the hock up the diversion load to 240 V so it would draw 2.5 kW. Needless to say it stalled the windmill each time my outback kicked on the diversion load. I had to leave the windmill off during the day. When I run the heating element on 120 V (and therefore 625 W) it works beautiful if the wind isn't too strong. Obviously the inverter handles 625 W quite well! He is also thinking about replacing the inverter with a newer split phase inverter (an XW or a Radian). If anyone has an opinion about which might work for him, I'd appreciate any feedback. I am not a fan of Xantrex, although I know some on the list really like the XW. If anyone has any ideas of either a fix or someone we can get through to at Magnum, that would be a great help. Thanks, Howie -- Howie Michaelson NABCEP Certified Solar PV Installer™ Catamount Solar, LLC Renewable Energy Systems Sales and Service VT Solar
[RE-wrenches] Wind Turbine sources?
With news that Southwest Windpower has layed off some of its staff and that they are discontinuing the Whisper line I wonder who will pick up the slack, if anyone! Perhaps Bergey will make their XL.1 in 48V. What turbine brands can the wrenches recommend? Sorry if this does not pertain to this list, Michael Jeremy All Solar CO, USA Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] 72 cell modules Needed.
We are in need of approx 2kw of 160-170w modules, 72 cell. Please contact me off list if you can help Jeremy Rodriguez allso...@scswifi.net Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Suntech
Just returned from Phoenix where I saw an article in one local paper that Suntech is cutting production down to 1 MW and laying off 50% of the work force at the Goodyear AZ facility. Too many tariff fees they claim... Another one bits the dust Jeremy All Solar Colorado Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] 48 VDC timer
Anyone know of a reliable 48vdc timer to control a well pump? Pump will be a Grundfos SQ 240VAC. The idea is to limit the run time to prevent over discharge of the battery bank. The only charging source for now will be wind power, and the wind gen requires AC voltage to connect. I'm concerned that the batteries may discharge, inverter (VFX 3648) shut down, and we loose input from the turbine. May be something else that works too. Right ?? Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Fw: BP Modules
--Original Message-- To: re-wrenches@lists.re-wrenches.org Subject: BP Modules Sent: Oct 2, 2012 3:54 PM Anyone know who is providing warranty support for BP? Same old problem - shattered glass from overheated J box area Jeremy Rodriguez Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Trace ICM cable
Hello, Anyone have a source for a Xantrex PS series inverter control panel cable? It's the 25 pin cable. Looks like an old printer cable. Also any luck with splicing (repairing) them as it's been cut. Contact me off list if u have one. allso...@scswifi.net Jeremy R All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Thermal storage water stabilizer
I've wondered about this as well with our unpressurized drainback systems. My HVAC supplier had told me that once you heat the water above 165 or so, that you basically have distilled it. Not sure. I thought you would need to boil it. Though we have had no issues with corrosion as we have had some tanks in the field for years. Jeremy Rodriguez All Solar Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: Will White william.wh...@realgoods.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Mon, 13 Aug 2012 12:29:22 To: RE-wrenchesre-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: Re: [RE-wrenches] Thermal storage water stabilizer ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Are they still in Business? AAA solar
Anyone know if AAA (semco) is still operating? Tried to order an Air Collector system and all the numbers are down or disconnected Jeremy Rodriguez All Solar Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Alternative to CT-104 Crimps
Ilsco ULT-4 Jeremy All Solar Colorado Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: Jason Szumlanski ja...@fafcosolar.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Thu, 2 Aug 2012 09:39:26 To: RE-wrenchesre-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Alternative to CT-104 Crimps ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Low power production at a winery: DC voltage drop upon SB6000 start-up
Look for burnt or hot spots near the top of the modules under the Jbox area. We have replaced a lot of modules of that age Ameresco solar is supposedly making the replacement modules Jeremy All Solar Sent via BlackBerry. Sorry for typos and shorthand! -Original Message- From: SunHarvest e...@harvesthesun.com Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sat, 21 Jul 2012 13:19:13 To: RE-wrenchesre-wrenches@lists.re-wrenches.org Reply-To: RE-wrenches re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Low power production at a winery: DC voltage drop upon SB6000 start-up ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Lithium Batteries
I have a request for Lithium batteries (ion?). Not sure how to respond. The application is an off grid, part time mountain home Any thoughts? Thank you Jeremy Ridriguez All Solar Colorado Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
[RE-wrenches] Sealed Battery Issues
Wrenches Can someone advise how to best check for a bad cell and or battery in a bank of sealed AGMs I have not installed many of these and have a client that I did for about a year ago. One looks like it may have leaked out some fluid from the top as it has some white residue there Jeremy Rodriguez Sent via BlackBerry. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
