Hi Carl,
thanks and yes, I think its why they only did a 120v version here.
Another question for you there.
Its my understanding that neither of your legs is bonded to ground correct?
jay
peltz power
On Feb 3, 2013, at 4:22 PM, Carl Emerson wrote:
> Hi Jay,
>
> Yes you have described our grid waveform correctly.
>
> It is strange to me that they call yours 240V, the rationale used to describe
> yours and mine are different I guess.
>
> Your grid seems to present less volts and more current.
>
> If this is correct then I am guessing that the transformers used in the units
> here will not work for you.
>
> Regards
> Carl Emerson
>
>
> Hi Carl,
>
> Your 230vac is a single wave form right?
> RMS peak to zero crossing of 230v
>
> vs our
>
> 240vac which is 2 phase wave form
> RMS peak to zero crossing of 120v
>
> Have I got this right?
>
> thanks,
> jay
>
> peltz power
>
>
>
>
> On Feb 2, 2013, at 6:56 PM, boB wrote:
>
>
>
> Carl, NZ is 240 VAC right ? 240 VAC 2 wire ?
>
> I think that the problem may have to do with leg to leg voltage cross
> regulation
> imbalance in 120/240 3 wire systems.
>
> boB
>
>
> On 2/2/2013 3:23 PM, Carl Emerson wrote:
>> Goodness knows why 240V Sunny Island’s are unavailable in the US…
>>
>> We have been installing these in NZ for years !!!
>>
>> Regards
>> Carl Emerson
>>
>>
>
>
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
