Re: [RE-wrenches] Corrugated Roof Brackets
Hi Jay, Just use your roofing sealant of choice: fill the pilot hole, leaving a nice big dab on the surface. Because all holes are in the peaks of the corrugations, the penetration point should see very little water there. In my opinion, this is less risky than trying to seal the corrugations with a dynaflash. Although the manufacturer's literature also shows using this product with pro-panel type roofs, for those we prefer either standoffs with dyna-flash or Schletter Fix-Ts. Cheers, Mark *Mark Westbrock* Branch Manager Employee-Owner NM EE98J Journeyman Electrician NABCEP Certified PV Installation Professional NABCEP Certified PV Technical Sales http://positiveenergysolar.com/ Positive Energy, Inc. 510 S. Main St. Las Cruces, NM 88001 office: 575-524-2030 cell: 575-640-2432 m...@positiveenergysolar.com westbr...@positiveenergysolar.com www.positiveenergysolar.com http://www.nabcep.org/installer-locator?state=NM http://www.nabcep.org/installer-locator?state=NM http://www.solarreviews.com/installers/positive-energy-solar/ http://www.bcorporation.net/ On Thu, Mar 5, 2015 at 3:40 PM, jay peltz j...@asis.com wrote: Hi Mark, I'm curious how you seal the hole. thanks jay peltz power On Mar 5, 2015, at 9:46 AM, Mark Westbrock westbr...@positiveenergysolar.com wrote: We like the SnapNrack corrugated roof blocks http://www.snapnrack.com/series-500-metal-roof-mount-system. They are simple, effective, and not too expensive (I think around $3.50 each). The only trick is that you need access to the roofing members because you will need to add blocking or sister up trusses so that you have a structural member directly below a corrugation peak. *Mark Westbrock* Branch Manager Employee-Owner NM EE98J Journeyman Electrician NABCEP Certified PV Installation Professional NABCEP Certified PV Technical Sales Positive Energy, Inc. 510 S. Main St. Las Cruces, NM 88001 office: 575-524-2030 cell: 575-640-2432 m...@positiveenergysolar.com westbr...@positiveenergysolar.com www.positiveenergysolar.com On Thu, Mar 5, 2015 at 9:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
Adam: We used the Corrubracket, I thought they were sub-standard in many ways. I dislike that the penetration is in the low point of the profile. Also, the threaded hubs stripped easily. The overall feel was that it was flimsy. We subsequently tried the SnapNRack Corrugated Roof Block and found it to be quite adequate. It is displayed on the web page with the 500 series product line. The SNR product works on industrial corrugated metal (narrow ridges and wide valleys) and historic barn corrugations (sine wave profile) alike. They are priced at less than $5.00 each (not including fastener). Coincidentally, I am placing an order for a quantity of them today. We are waiting for a sample of a product made by EJOT. This is a bolt that penetrates through the high point of the corrugation (always a better option) and includes a rain guard of some sort. The rain guard is pictured on industrial roofing and I am not sure it will work on barn corrugation profile. The product has threads for wood or metal. I always like to touch hardware to get a better feel for the quality and usability. I will report when I get my hands on a sample. William Miller From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of AE Solar Sent: Thursday, March 05, 2015 8:01 AM To: RE-wrenches Subject: [RE-wrenches] Corrugated Roof Brackets Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm . Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
Adam, I'm a big fan of the Corrubracket. We've installed hundreds of them on a whole range of different types of corrugated roofing, with zero problems so far. The peel-and stick sealant that comes attached to the bracket works really well, but it can get pulled aside as the fastener goes through and grabs the sealant. I always try to check the bracket after attachment to make sure that the sealant is fully between the bracket and the roofing, and often I will daub polyurethane caulking on top of the fasteners. The only thing I don't like is the price point and the fact that the span of the four mounting holes often necessitates some form of blocking. -Luke Luke Christy NABCEP Certified PV Installation Professional™: Certification #031409-25 NABCEP Certified Solar Heating Installer™: Certification #ST032611-03 CoSEIA Certified PV Installer Solar Gain Services, LLC PO Box 531 Monte Vista, CO. 81144 sgsrenewab...@gmail.com 719.588.3044 www.sgsrenewables.com From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of AE Solar Sent: Thursday, March 05, 2015 8:01 AM To: RE-wrenches Subject: [RE-wrenches] Corrugated Roof Brackets Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm . Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ** ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
Hi Mark, I'm curious how you seal the hole. thanks jay peltz power On Mar 5, 2015, at 9:46 AM, Mark Westbrock westbr...@positiveenergysolar.com wrote: We like the SnapNrack corrugated roof blocks. They are simple, effective, and not too expensive (I think around $3.50 each). The only trick is that you need access to the roofing members because you will need to add blocking or sister up trusses so that you have a structural member directly below a corrugation peak. Mark Westbrock Branch Manager Employee-Owner NM EE98J Journeyman Electrician NABCEP Certified PV Installation Professional NABCEP Certified PV Technical Sales Positive Energy, Inc. 510 S. Main St. Las Cruces, NM 88001 office: 575-524-2030 cell: 575-640-2432 m...@positiveenergysolar.com www.positiveenergysolar.com On Thu, Mar 5, 2015 at 9:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
we've installed hundreds of these and use rubber grommets Max Balchowsky Design Engineer Golden Bridge Development 1048 Irvine Ave Suite 217 Newport Beach, Ca. 92660 760-403-6810Building a Better Future For The Next Generation From: jay peltz j...@asis.com To: RE-wrenches re-wrenches@lists.re-wrenches.org Sent: Thursday, March 5, 2015 2:40 PM Subject: Re: [RE-wrenches] Corrugated Roof Brackets Hi Mark, I'm curious how you seal the hole. thanks jay peltz power On Mar 5, 2015, at 9:46 AM, Mark Westbrock westbr...@positiveenergysolar.com wrote: We like the SnapNrack corrugated roof blocks. They are simple, effective, and not too expensive (I think around $3.50 each). The only trick is that you need access to the roofing members because you will need to add blocking or sister up trusses so that you have a structural member directly below a corrugation peak. Mark Westbrock Branch Manager Employee-OwnerNM EE98J Journeyman Electrician NABCEP Certified PV Installation ProfessionalNABCEP Certified PV Technical Sales Positive Energy, Inc. 510 S. Main St.Las Cruces, NM 88001 office: 575-524-2030 cell: 575-640-2432 m...@positiveenergysolar.com www.positiveenergysolar.com On Thu, Mar 5, 2015 at 9:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers,Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. ThanksAdam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
I've tried the Versabracket, which uses a similar sealing method, with great results. I can't speak for the Corrubracket specifically. Jason Szumlanski On Thu, Mar 5, 2015 at 11:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org -- *Florida Solar Design Group is not an engineering or architectural firm and acts only as a consultant and authorized independent sales agent. Any advice or work product provided shall not be considered licensed professional services provided under Florida Statute Chapters 471, 481, or 491.* ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
Our S-5! friends have come up with a new bracket for sinusoidal, corrugated roofs with the penetration points being ON TOP of the ridges and not in the valleys, which is a more bettah design (as we say here in Hawaii). S-5! is only now supplying them to their distributor chain, so you may want to contact S-5! directly to get them. They're in the ~ $10/piece (ouch!) range. marco From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of AE Solar Sent: Thursday, March 05, 2015 6:01 AM To: RE-wrenches Subject: [RE-wrenches] Corrugated Roof Brackets Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm . Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 _ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2250 / Virus Database: 4257/8730 - Release Date: 03/05/15 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
We like the SnapNrack corrugated roof blocks http://www.snapnrack.com/series-500-metal-roof-mount-system. They are simple, effective, and not too expensive (I think around $3.50 each). The only trick is that you need access to the roofing members because you will need to add blocking or sister up trusses so that you have a structural member directly below a corrugation peak. *Mark Westbrock* Branch Manager Employee-Owner NM EE98J Journeyman Electrician NABCEP Certified PV Installation Professional NABCEP Certified PV Technical Sales Positive Energy, Inc. 510 S. Main St. Las Cruces, NM 88001 office: 575-524-2030 cell: 575-640-2432 m...@positiveenergysolar.com westbr...@positiveenergysolar.com www.positiveenergysolar.com On Thu, Mar 5, 2015 at 9:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated Roof Brackets
Also look at Sunmodo they have some nice brackets and are state side Jerry On Mar 5, 2015 6:00 AM, AE Solar autonomousenerg...@gmail.com wrote: Hey Wrenchers, Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the S-5! CorruBracket http://www.s-5.com/clamps/index_2624.cfm. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks Adam Adam Katzman Autonomous Energies 4872 State Route 9G Germantown NY, 12526 www.autonomousenergies.com (518) 567-1468 ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated roof brackets
Jeremy: We used them on one job and did not favor them for these reasons: 1. Don't like having the penetrations in the valleys 2. The adhesive is fragile and either peels off or significant amounts wrap around the drill or fasteners 3. The threaded connections felt fragile and I recall a few stripped The next job we used Snapnrack corrugated roof brackets and were very pleased. http://www.snapnrack.com/series-500-metal-roof-mount-system William -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar, Inc. Sent: Thursday, January 23, 2014 1:37 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] Corrugated roof brackets Can anyone comment on the S-5! CorruBracket? Any other recommendations or comments appreciated. Jeremy Rodriguez, President All Solar, Inc. 1463 M Penrose Colorado 81240 719-372-3808 office 719-372-3804 fax http://www.asolarelectric.com www.asolarelectric.com Sent by Jeremy's iPhone. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: mailto:RE-wrenches@lists.re-wrenches.org RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: http://www.re-wrenches.org/etiquette.htm www.re-wrenches.org/etiquette.htm Check out participant bios: http://www.members.re-wrenches.org www.members.re-wrenches.org - No virus found in this message. Checked by AVG - http://www.avg.com www.avg.com Version: 2013.0.3462 / Virus Database: 3681/7027 - Release Date: 01/23/14 ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
Re: [RE-wrenches] Corrugated roof brackets
Go look at sunmodo they also have some solutions tell them jerry from affinity sent you, great price point. The are in Washington state check it out On Jan 23, 2014 1:37 PM, All Solar, Inc. allso...@scswifi.net wrote: Can anyone comment on the S-5! CorruBracket? Any other recommendations or comments appreciated. Jeremy Rodriguez, President All Solar, Inc. 1463 M Penrose Colorado 81240 719-372-3808 office 719-372-3804 fax www.asolarelectric.com Sent by Jeremy's iPhone. Sorry for typos and shorthand! ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org