baja de lista
Alguién me puede decir como me puedo dar de baja de esta lista gracias... Carles Roca Lafoz INDUCONTROL, S.L. [EMAIL PROTECTED]
Re: baja de lista
Hi! Have to do it in english but maybe it will help you solving your problem or someone else can translate it for you. Go to the following URL: https://www.redhat.com/mailman/listinfo/redhat-list/ Read the section entitled by redhat-list Subscribers. It says To change your subscription (set options like digest and delivery modes, get a reminder of your password, or unsubscribe from redhat-list), enter your subscription email address:. Put your email address you used for subscription in the input field below this sentence and click on the button to edit your options. On the following page your able to unsubscribe from this list if you know your password. If you don't know you password just use the button Email my password to me. Good luck, Alex -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: where to put user xset commands?
On 02-Oct-2003/17:45 -0300, Herculano de Lima Einloft Neto [EMAIL PROTECTED] wrote: I've tried ~/.Xclients, even ~/.xinitrc, with full paths, with exec , but nothing. I give up. Anyone? Add the commands to ~/.bash_profile within an if loop that checks to see if you're running X: if [ -n $DISPLAY ] ; then xset whatever fi Tony -- Anthony E. Greene mailto:[EMAIL PROTECTED] OpenPGP Key: 0x6C94239D/7B3D BD7D 7D91 1B44 BA26 C484 A42A 60DD 6C94 239D AOL/Yahoo Messenger: TonyG05HomePage: http://www.pobox.com/~agreene/ Linux. The choice of a GNU generation http://www.linux.org/ -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
nvidia -- tv-out
I have a NVIDIA GeForce 4 with TV-out, and I would like to get DVD to display on my TV. I have browsed around and found many different tools but can't really seem to find my way around it all. Does anyone have any experience in this? I run RH9. Thanks Martin -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
LANG=?
The other day I was trying to install the latest Mail::SpamAssassin module through CPAN and it kept failing early in the compile. I've run into this before, so I looked at /etc/sysconfig/i18n and sure enough my LANG variable was set back to the default LANG=en_US.UTF-8. I changed it to en_US (again) and SpamAssassin compiled cleanly. Some questions: Why would Redhat choose an encoding for rh9 that breaks all manner of things? And what reset the LANG variable back to UTF-8, and how do I prevent this from happening again? -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
httpd at boot
Hi, I got excellent answers concerning mysql og httpd start as services, and have a question in relation to this subject. I have looked into what happens at boot, but I don't have a deeper understanding of it yet. Therefore, I don't know if it is possible/advisable to change the setting that prompts me for a httpd ssl-password at boot. If it is, then where an how do I make this change? Recipies have been a great help, but I have also had great experiences with small hints leading me to small studies an new questions. This computer thing has somewhat of a zen-thing going for it. It's wonderful. Thanks, Martin -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
permissions of fat32 partition
Hello, I have a problem which i can't solve and don't know how to. I have the redhat linux 9 partition and a FAT32(F: in windows) partition, i also have windows on a different partition(C:). There is only files and folders on the F: drive. THE PROBLEM After mounting the F: . The permissions are as follows: OWNER(root): rwe GROUP : r-e USERS : r-e ordrwer-er-e As you can see, only the root user can write to this mounted partition. When i log in as root, i can not change this permissions so that i can write to it as a normal user(which is what im trying to achieve). I am using the GUI, i've also tried chmod in a terminal. The error message i get says i do not have permission to change the permissions even when im logged in as root! Is there any way i change the permissions so i can write to it as a user? Owner of the /mnt/vfat is the root user. SOME OTHER INFO I am the only user using linux at home. Two user accounts which is my own and root. Dual-Boot PC (Win and Linux). Physical location of F: drive /hda/hda8. Redhat 9 Owner of the /mnt/vfat is the root user. I am a begineer who is learning. (please dont get really technical) _ Stay in touch with absent friends - get MSN Messenger http://www.msn.co.uk/messenger -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
ssh_exchange_identificatio error when using ssh
Hello all, I have a brand new system that I have installed RH 9 with all updates. Since the updates, I now cannot ssh *from* this server to any other one, but I *can* ssh *to* this server. This is what I get when I try from the new server: [EMAIL PROTECTED] root]# ssh -v aa OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090701f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1: Connecting to aa [10.1.5.93] port 22. debug1: Connection established. debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host debug1: Calling cleanup 0x178e8(0x0) [EMAIL PROTECTED] root]# This is what I get from a different server trying the same thing: [EMAIL PROTECTED] root]# ssh -v aa OpenSSH_3.5p1, SSH protocols 1.5/2.0, OpenSSL 0x0090701f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1: Connecting to aa [10.1.5.93] port 22. debug1: Connection established. debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.5p1 debug1: match: OpenSSH_3.5p1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.5p1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server-client aes128-cbc hmac-md5 none debug1: kex: client-server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 134/256 debug1: bits set: 1607/3191 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'aa' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:2 debug1: bits set: 1570/3191 debug1: ssh_rsa_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: service_accept: ssh-userauth debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password debug1: next auth method to try is publickey debug1: try privkey: /root/.ssh/identity debug1: try privkey: /root/.ssh/id_rsa debug1: try privkey: /root/.ssh/id_dsa debug1: next auth method to try is password [EMAIL PROTECTED]'s password: I've done some googling, and searching on this list. I found this: http://marc.theaimsgroup.com/?l=redhat-listm=104327086805653w=2 which indicates that I need to add ALL: your_ip_address_of_the_client to my /etc/hosts.allow. I've done that (substituting 10.1.5.93 for the obvious). I then restarted the network service. It still didn't work. I turned off iptables. Still no joy. There is no clue in /var/log/secure. As far as that log is concerned, I didn't do anything with ssh. Any hints? TIA, Bill -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Up2date return codes [Summary]
On Thu, 2003-10-02 at 11:10, Jason Dixon wrote: I'm looking for an exhaustive list of return codes for up2date. The manpage claims only two: 0 (success) and 1 (failure). However, I've managed to trap a 256 as well, so I was wondering if anyone's seen anything authoritative. I've found the answer to my query (sorta). The following list of return codes was found in the /actions/errstatus.txt file of the up2date (version 3.1.23) source. It doesn't answer what 256 might be referring to, but it's interesting nonetheless: 0: rollback completed 12: Error refreshing system hardware 13: Invalid arguments passed to function 14: up2date.DependencyError 15: up2date.RpmRemoveError 16: %s could not be removed because it was on the skip list % e 17: Failed: packages requested are no longer available 18: Failed: packages requested raised dependency problem 19: Unknown exit status from batchrun 20: Error refreshing package list 21: There was a communication error talking to the server 22: There was a package gpg verification error. The error was 23: There was a package gpg verification error. 24: gpg is not properly installed on this machine 25: The package signing key for Red Hat, Inc. is not on the gpg keyring 26: Failed: There was a package conflict error with the package set 27: Failed: There was a file conflict error with the package set 28: There was a dependency sense error 29: There was a dependency raised that could not be found 30: Failed: Some of the packages specified were on the package skip list 31: A package or header was not found 32: A package failed to install 33: A package failed to install because the system was out of space 34: could not executre shutdown 35: invalid tid to rollback 36: from tid is older than latest tid 37: Could not modify /etc/sysconfig/rhn/rhnsd 38: noReboot config option turned on 39: 'No packages from that errata are available' -- Jason Dixon, RHCE DixonGroup Consulting http://www.dixongroup.net -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: httpd and glibc compatibility problems
damovand wrote: Hi, I think mod_auth_mysql is probably for authenticating a remote user of MySQL. If I'm correct then I can comment out that statement. But my concern is the incompatibility that exists. Why is it so? Am I going to have problems with other modules and features? For example if I download something that needs compiling am I going to get an error? Thanks for your advice. Leila Hi Leila, There was a big change in apache from that used in RH 7.3 to that used in 9. There were changes in the organization of the configuration file. I would recommend using the new httpd.conf file, and copying the stuff from the old .conf file that is specific to your site into the new .conf. That is what I did (with mine, of course), and it worked. HTH, Bill -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Linux hang
I got a Cisco CD565 K9 content engine. When it's boot I see the following screen. CSCO CHS dbgrub-start.S Uncompressing Linux.Ok booting the kernel. How I can make the system boots up to a command prompt? Thanks Dali __ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Mail problem or perl problem or something
I've got a perl script that runs and sends an email. It worked fine until I added the -b option for a blank carbon copy. The mail is still getting sent to the last address, but the bcc's are not getting sent and the mail is added to dead.letter file. When I run a command line mail command with bcc it works fine. Anyone have an Idea? Script snippet: From a for loop that iterates through the array of email addresses in $row: $setup = -s \Email Subject\ -b [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED] $row[i]; $check = system(echo -e $message | mail $setup); ransom, webmaster and postgres do not recieve any email, but everyone in $row[i] do recieve the email. Thanks, Rich -- Rich Ransom Webmaster KISS Institute http://www.botball.org http://www.kipr.org [EMAIL PROTECTED] -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Minimal install RH8?
Hi! I am thinking of making a fresh install of RH8 with minimal option (476 megs). Then I myself to compile and install PHP, Apache2, Squid, Samba, Wu-ftp. The question is if I will be able to compile all this with the software which is allready installed with this minimal instalation or I will need some additional software? Sasa -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Minimal install RH8?
You'll need gcc, kernel headers and some dev libs, and some other packages. -Original Message- From: Sasa Stupar [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 10:16 AM To: [EMAIL PROTECTED] Subject: Minimal install RH8? Hi! I am thinking of making a fresh install of RH8 with minimal option (476 megs). Then I myself to compile and install PHP, Apache2, Squid, Samba, Wu-ftp. The question is if I will be able to compile all this with the software which is allready installed with this minimal instalation or I will need some additional software? Sasa -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Is there a tripwire list?
I have been trying to get tripwire configured, but because I run nightly backups I get warnings due to time changes on files. I have added the -a which I thought was to ignore access times, but I still get it. It makes tripwire almost useless as it reports over 2000 errors. Most of the errors are the same as the one below. For example, this is one I get. TWReport myserver.com 20031003070101 V:2196 S:100 A:0 R:0 C:2196 Modified object name: /etc/sysconfig/network-scripts/ifup-routes Property:Expected Observed ---- --- * Change Time Fri Jun 27 14:04:46 2003Thu Oct 2 23:03:02 2003 If I run the database update and then rerun it: TWReport myserver.com 20031002080850 V:0 S:0 A:0 R:0 C:0 But as soon as I do the backup, it returns to over 2000 errors. If anybody can lead me in the right direction, they will find a little something extra in their paycheck. Lint! :-P Seriously though, I am getting ready to roll out my RHAS servers and want to keep a close eye on hacker attacks. Thanks Ed Croft, RHCE -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
bsd
Title: bsd I am trying to mount redhat 9 to a freeBSD partition. I used a mount line that whould work, but it doesn't see the partition. The drive is from a maxtor maxattach 4000. Anyone have any info on this? Thank you.
MySql Newbie
I am starting to work with MySql 4.x.(have it installed and running on my RH 9 machine) I am not new to relational databases (SqlServer, Informix), but am new to MySql. Can someone recommend the appropriate list when learning MySql from the ground-up? Thanks Rich Hobson -- Richard F. Hobson [EMAIL PROTECTED] Hobson Renaissance Solutions LLC www.rhobson.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: MySql Newbie
On Fri, 2003-10-03 at 11:15, Richard F. Hobson wrote: I am starting to work with MySql 4.x.(have it installed and running on my RH 9 machine) I am not new to relational databases (SqlServer, Informix), but am new to MySql. Can someone recommend the appropriate list when learning MySql from the ground-up? Thanks Rich Hobson -- Richard F. Hobson [EMAIL PROTECTED] Hobson Renaissance Solutions LLC www.rhobson.com CHeck the MySQL site http://lists.mysql.com -- Michael Gargiullo [EMAIL PROTECTED] Warp Drive Networks -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: MySql Newbie
I'm betting you can find the list you're looking for here http://lists.mysql.com/ -- Hardy Merrill Red Hat, Inc. -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: where to put user xset commands?
Anthony E. Greene wrote: Add the commands to ~/.bash_profile within an if loop that checks to see if you're running X: if [ -n $DISPLAY ] ; then xset whatever fi Thanks, that will do it.. there should be another way though. -- Herculano de Lima Einloft Neto [EMAIL PROTECTED] -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RH9 - Kernel 2.4.22 - parallel port problem
Hi, I am running RH 9, Kernel 2.4.22 on my Toshiba Tecra 9000. For some reason, RH just does not recognize my Parallel Port. So, I am stuck without being able to print on my Epson Stylus 80. Any thoughts? tia.. Shesh -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: permissions of fat32 partition
Hi, Look for the file fstab in the /etc folder and open it with your favorite text-editor. Now look for a line like: /dev/hda8 /mnt/vfat vfat defaults 0 0 and change it to: /dev/hda8 /mnt/vfat vfat defaults,umask=000 0 0 This will give read/write/execute permision to all users, which is ok if it's your home box. Be careful with spaces!! Re-boot and have fun. Reven - Original Message - From: Ashley Ratcliffe [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 3:00 PM Subject: permissions of fat32 partition | Hello, | | I have a problem which i can't solve and don't know how to. | | I have the redhat linux 9 partition and a FAT32(F: in windows) partition, i | also have windows on a different partition(C:). There is only files and | folders on the F: drive. | | THE PROBLEM | After mounting the F: . The permissions are as follows: | | OWNER(root): rwe | GROUP : r-e | USERS : r-e | ordrwer-er-e | | As you can see, only the root user can write to this mounted partition. | When i log in as root, i can not change this permissions so that i can write | to it as a normal user(which is what im trying to achieve). | | I am using the GUI, i've also tried chmod in a terminal. | The error message i get says i do not have permission to change the | permissions even when im logged in as root! | | Is there any way i change the permissions so i can write to it as a user? | Owner of the /mnt/vfat is the root user. | | SOME OTHER INFO | I am the only user using linux at home. | Two user accounts which is my own and root. | Dual-Boot PC (Win and Linux). | Physical location of F: drive /hda/hda8. | Redhat 9 | Owner of the /mnt/vfat is the root user. | I am a begineer who is learning. (please dont get really technical) -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Minimal install RH8?
Wasn't there some type of distro proyect that was precisely a RedHat adaptation for minimal systems? I saw somthing of the like on the web once. Try some googleing! Reven - Original Message - From: Jason Staudenmayer [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 4:16 PM Subject: RE: Minimal install RH8? | You'll need gcc, kernel headers and some dev libs, and some other packages. | | -Original Message- | From: Sasa Stupar [mailto:[EMAIL PROTECTED] | Sent: Friday, October 03, 2003 10:16 AM | To: [EMAIL PROTECTED] | Subject: Minimal install RH8? | | | Hi! | | I am thinking of making a fresh install of RH8 with minimal option (476 | megs). Then I myself to compile and install PHP, Apache2, Squid, Samba, | Wu-ftp. | The question is if I will be able to compile all this with the software | which is allready installed with this minimal instalation or I will need | some additional software? | | Sasa -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: RH9 - Kernel 2.4.22 - parallel port problem
Try rebuilding with parallel support. make xconfig or make menuconfig and turning it on in the build and them rebuild. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shesh Kondi Sent: Friday, October 03, 2003 11:19 AM To: [EMAIL PROTECTED] Subject: RH9 - Kernel 2.4.22 - parallel port problem Hi, I am running RH 9, Kernel 2.4.22 on my Toshiba Tecra 9000. For some reason, RH just does not recognize my Parallel Port. So, I am stuck without being able to print on my Epson Stylus 80. Any thoughts? tia.. Shesh -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Two network cards as one
Hi! I have Red Hat 9 with 2 network cards, I want to make a load balance but I don't know how too fuse them, is there any way to do this? Thanks for your help
Re: Two network cards as one
Sounds like you're talking about bonding, not load balancing...google is your friend. When you know what you're looking for is the time to ask it here. Regards, MRW - Original Message - From: mike To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 12:52 PM Subject: Two network cards as one Hi! I have Red Hat 9 with 2 network cards, I want to make a load balance but I don't know how too fuse them, is there any way to do this? Thanks for your help ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
Re: Two network cards as one
On Fri, 2003-10-03 at 12:52, mike wrote: Hi! I have Red Hat 9 with 2 network cards, I want to make a load balance but I don't know how too fuse them, is there any way to do this? Thanks for your help Mike, that depends on the card. I use the Intel cards which have AFT software. It allows me to bond ports. I have two dual nics. I pair the first port on the first card with the second port on the second and then reverse that for the second pair. Then I have one of each pair go to a different switch. That allows for failover. 0 1|aft0 2 3 0 1 2|aft1 3 With 0 and 1 going to the first hub. 2 and 3 go to the second. -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
modem programming
hello, I have to build an application that supports file transfer thru dial-up network, as a part of my acedemic project work this semester. I'd been busy with a commercial CGI project for one of the call-center websites. I had posted for help prior to this and was advised to read thru serial programming and modem HOWTOs. I have gone thru Serial programming HOWTO and modems HOWTO. But I'm not able to assemble the pieces together. Can anyone please assist me in this regard? I just need some sample code that can dial a phone number, and a sample code to setup a linux machine to answer a call, so that a connection can be established. Please assist me in this regard. Regards,Srinivas. Do you Yahoo!? The New Yahoo! Shopping - with improved product search
kppproblem
was try to connect to the internet redhat8. the modem dialed the number then i get error messages terminal is: Opener: received SetSecret Opener: received OpenDevice Opener: received ExecPPPDaemon In parent: pppd pid 3013 Opener: received OpenResolv Opener: received OpenResolv Opener: received OpenResolv Couldn't find interface ppp0: No such device Kernel supports ppp alright. Couldn't find interface ppp0: No such device Opener: received KillPPPDaemon In killpppd(): Sending SIGTERM to 3013 It was pppd that died pppd exited with return value 5 Sending 3009 a SIGUSR1 Opener: received RemoveSecret Opener: received RemoveSecret Opener: received OpenResolv Opener: received OpenResolv i use kppp. how can i fix this problem? thanks __ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Using RJ45 crimp tool
Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Two network cards as one
Ok, thanks for the tip Now, how do I activate bonding or where can I download the correct bonding driver, since I don't have this file /etc/sysconfig/network-scripts/ifcfg-bond0. Thanks! - Original Message - From: mwafkowski To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 12:14 PM Subject: Re: Two network cards as one Sounds like you're talking about bonding, not load balancing...google is your friend. When you know what you're looking for is the time to ask it here. Regards, MRW - Original Message - From: mike To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 12:52 PM Subject: Two network cards as one Hi! I have Red Hat 9 with 2 network cards, I want to make a load balance but I don't know how too fuse them, is there any way to do this? Thanks for your help ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
RE: Using RJ45 crimp tool
From: Harold Martin Sent: Friday, October 03, 2003 11:06 Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Do you mean something like: http://www.netspec.com/helpdesk/wiredoc.html HTH Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
On Fri, 2003-10-03 at 14:17, cajun wrote: Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez Wire color doesn't matter as much as placement. Straight cable PinsPins 1 1 2 2 3 3 4 4 5 5 6 6 7 7 88 Cross over PinsPins 1 3 2 6 3 1 4 4 5 5 6 2 7 7 88 Notice 13 and 26 are swapped on ONE end. Just for giggles... Rolled cable (Console cable) PinsPins 1 8 2 7 3 6 4 5 5 4 6 3 7 2 81 For Cisco, Cyclades and other equipment As for the crimper. The most important part is to make sure each of the 8 wires goes to the end of the connector. The art of it is squeezing hard enough for the teeth to penetrate to the conductor, but not push the pins too deep into the connector. -- Michael Gargiullo [EMAIL PROTECTED] Warp Drive Networks -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Apache server read permissions
Okay, I am at a complete loss. I made all of the recommendations posted and determined the following; 1) Apache is running and can serve its default page from http://localhost 2) All file system permissions are set correctly. 3) It appears that, maybe, something in the global settings is overriding setting in the virtual server. Here is the Virtual Server lines from httpd2.conf; NameVirtualHost 192.168.101.101 VirtualHost 192.168.101.101 DocumentRoot /var/www/html/ddd ServerName www.domainname.com:80 ServerAlias domainname.com ErrorLog /var/log/httpd/ddd_error_log TransferLog /var/log/httpd/ddd_access_log Directory /var/www/html/ddd Options Indexes order allow,deny allow from all /Directory /VirtualHost Here is the error message when to page is visited; You don't have permission to access / on this server. and... You don't have permission to access /index.html on this server From the error log; [Fri Oct 03 11:26:29 2003] [crit] [client 192.168.101.201] (13)Permission denied: /var/www/html/cci/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable From the access log; 192.168.101.201 - - [03/Oct/2003:11:25:16 -0700] GET / HTTP/1.1 403 410 192.168.101.201 - - [03/Oct/2003:11:26:29 -0700] GET /index.html HTTP/1.1 403 420 Many thanks for all of your responses. Any help with figuring this out will be greatly appreciated. James D. Parra Systems Administrator, IT Dept. Music Reports, Inc. [EMAIL PROTECTED] ph (818) 558-1400 x112 fx (818) 558-3484 -Original Message- From: John Nichel [mailto:[EMAIL PROTECTED] Sent: Thursday, October 02, 2003 8:26 PM To: [EMAIL PROTECTED] Subject: Re: Apache server read permissions James D. Parra wrote: jp -No I am not. I want clients to have read-only access. The directory and its contents have 'rw_r__r__' permissions. You do not need .htaccess to accomplish this. This will be handled by the user/group Apache is running as vs. the user/group ownership of the directory. jp -Added that. What should I add to the .htaccess file? No .htaccess is needed unless you're trying to password protect a directory. You either need to create/add an 'index.html' file in your document root directory, or you need to add the word 'Indexes' to the options of your vhost VirtualHost * ServerName your.server.name ServerAlias if.alias.exists ScriptAlias /cgi-bin/ /path/to/cgi-bin/ ServerAdmin [EMAIL PROTECTED] DocumentRoot /your/document/root ErrorLog logs/error_log_name CustomLog logs/access_log_name common Directory /your/document/root Options Indexes /Directory /VirtualHost -- By-Tor.com It's all about the Rush http://www.by-tor.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
On Fri, 2003-10-03 at 14:37, Nick White wrote: Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. SNIP Now that I'm thinking about it... It has been a long while since I've seen colors other then those in CAT cable... Maybe since CAT 3... -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Apache server read permissions
On Fri, 2003-10-03 at 14:34, James D. Parra wrote: Okay, I am at a complete loss. Try this link: http://www.freewebmasterhelp.com/tutorials/htaccess/1 I made all of the recommendations posted and determined the following; 1) Apache is running and can serve its default page from http://localhost 2) All file system permissions are set correctly. 3) It appears that, maybe, something in the global settings is overriding setting in the virtual server. Here is the Virtual Server lines from httpd2.conf; NameVirtualHost 192.168.101.101 VirtualHost 192.168.101.101 DocumentRoot /var/www/html/ddd ServerName www.domainname.com:80 ServerAlias domainname.com ErrorLog /var/log/httpd/ddd_error_log TransferLog /var/log/httpd/ddd_access_log Directory /var/www/html/ddd Options Indexes order allow,deny allow from all /Directory /VirtualHost Here is the error message when to page is visited; You don't have permission to access / on this server. and... You don't have permission to access /index.html on this server From the error log; [Fri Oct 03 11:26:29 2003] [crit] [client 192.168.101.201] (13)Permission denied: /var/www/html/cci/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable From the access log; 192.168.101.201 - - [03/Oct/2003:11:25:16 -0700] GET / HTTP/1.1 403 410 192.168.101.201 - - [03/Oct/2003:11:26:29 -0700] GET /index.html HTTP/1.1 403 420 Many thanks for all of your responses. Any help with figuring this out will be greatly appreciated. James D. Parra Systems Administrator, IT Dept. Music Reports, Inc. [EMAIL PROTECTED] ph (818) 558-1400 x112 fx (818) 558-3484 -Original Message- From: John Nichel [mailto:[EMAIL PROTECTED] Sent: Thursday, October 02, 2003 8:26 PM To: [EMAIL PROTECTED] Subject: Re: Apache server read permissions James D. Parra wrote: jp -No I am not. I want clients to have read-only access. The directory and its contents have 'rw_r__r__' permissions. You do not need .htaccess to accomplish this. This will be handled by the user/group Apache is running as vs. the user/group ownership of the directory. jp -Added that. What should I add to the .htaccess file? No .htaccess is needed unless you're trying to password protect a directory. You either need to create/add an 'index.html' file in your document root directory, or you need to add the word 'Indexes' to the options of your vhost VirtualHost * ServerName your.server.name ServerAlias if.alias.exists ScriptAlias /cgi-bin/ /path/to/cgi-bin/ ServerAdmin [EMAIL PROTECTED] DocumentRoot /your/document/root ErrorLog logs/error_log_name CustomLog logs/access_log_name common Directory /your/document/root Options Indexes /Directory /VirtualHost -- By-Tor.com It's all about the Rush http://www.by-tor.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- Hart's PGP Key: 0x7BFF655E - http://TQMcube.com/hart_pgp.txt Total Quality Management - A Commitment to Excellence Email acceptance policy: http://www.TQMcube.com/email_policy.html signature.asc Description: This is a digitally signed message part
RE: Using RJ45 crimp tool
I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
This might be nitpicky, but as I understand it, color order does matter due to the use of the twisted pairs. The pairs are twisted to compensate for the spin of the energy moving through the cables, lessening the occurrence of cross talk. The popular standards consider the use of the pairs in such a manner. Inventing your own color pattern will cause a degradation of performance. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
This might be nitpicky, but as I understand it, color order does matter due to the use of the twisted pairs. The pairs are twisted to compensate for the spin of the energy moving through the cables, lessening the occurrence of cross talk. The popular standards consider the use of the pairs in such a manner. For Gigabit network wiring, where all four paires are used, this will definately be the case. But, for 10baseT and 100baseT, you can swap pairs. Only two of the four pairs are used. I do a lot of wiring for a couple of shows for my company and at the last show, a pair was broken. Of course, it was one of the two pair that is active. I just swapped a good pair for the bad and everything worked fine. That cable can never be used to Gigabit networking, but in this case it didn't matter. The cable couldn't be replaced as it was under carpeting. Inventing your own color pattern will cause a degradation of performance. It is best to work under that rule. BTW, the color code is old telephone standard for 4-pair cable (Orange- Blue-Green-Brown). How the pairs are used for ethernet is not. MB -- e-mail: [EMAIL PROTECTED]/~\ The ASCII \ / Ribbon Campaign [So it's true, scythe matters. Willow 5/12/03] X Against Visit - URL: http://vidiot.com/ / \ HTML Email -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
As some of the people have already alluded to, the pair matching does matter. Category 5/5e/6 all have different twists, and Category 6 even has a piece of plastic in the cable the keeps the twisted pairs separated. Matching the pairs to the standards of EIA/TIA 568a and 568b help alleviate crosstalk in the cable. I found a link that should be helpful. http://www.ablecables.com.au/568avb.htm James Williams Network Systems Engineer -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zyski, John Sent: Friday, October 03, 2003 1:48 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool This might be nitpicky, but as I understand it, color order does matter due to the use of the twisted pairs. The pairs are twisted to compensate for the spin of the energy moving through the cables, lessening the occurrence of cross talk. The popular standards consider the use of the pairs in such a manner. Inventing your own color pattern will cause a degradation of performance. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
PHP update question:
Title: Message Is there a way to update to the latest version of PHP (PHP 4.3.4RC1)using RPM's rather then using source code. I am unable to find any RH downloads for this. I am using RH9. thanks -Me * This document and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication may contain material protected by the attorney-client privilege or other privileges or protections from discovery, such as the physician-patient privilege, or a peer review privilege, such as California Evidence Code Section 1157. If you are not the intended recipient or the individual responsible for delivering the document to the intended recipient, please be advised that you have received this document in error and that any use, dissemination, forwarding, printing, or copying of this document is strictly prohibited. If you have received this document in error, please notify the sender immediately, and destroy all copies of the document. *
reiserfs + LVM
Has anyone used LVM with reiserfs filesystems on a RHEL AS 2.1 production system before? I've done this before on a few non-critical production servers and haven't had any problems. I want to implement this on our mission critical ERP system now, and I was wondering if anyone is using this currently? I'm asking because Red Hat still considers reiserfs experimental for some reason. The reason for using reiserfs over ext3 is because LVM logical volumes formatted with reiserfs can be dynamically resized on the fly. With ext3, you have to unmount the LV, resize it, and then remount it. Thanks, -- Chris Purcell, RHCE -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Apache server read permissions
James D. Parra wrote: snip NameVirtualHost 192.168.101.101 VirtualHost 192.168.101.101 DocumentRoot /var/www/html/ddd Look here ServerName www.domainname.com:80 You don't need the ':80' ServerAlias domainname.com ErrorLog /var/log/httpd/ddd_error_log TransferLog /var/log/httpd/ddd_access_log Directory /var/www/html/ddd -- And here Options Indexes order allow,deny allow from all /Directory /VirtualHost You don't have permission to access / on this server. See below. You don't have permission to access /index.html on this server More below. From the error log; [Fri Oct 03 11:26:29 2003] [crit] [client 192.168.101.201] (13)Permission denied: /var/www/html/cci/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Your document root path in the error message (/var/www/html/cci/) is different than that you have in you config file (/var/www/html/ddd). Is this machine hosting multiple sites (Virtual hosts)? If it is, does the box have more than one IP? If only one IP, and Virtual hosts, do you have DNS pointing to the box for the different names? -- By-Tor.com It's all about the Rush http://www.by-tor.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
Whew! I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? I really appreciate all your help. Harold On Fri, 2003-10-03 at 12:16, Chris Wilson wrote: The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Is there a tripwire list?
On Fri, 2003-10-03 at 07:57, Edward Croft wrote: I have been trying to get tripwire configured, but because I run nightly backups I get warnings due to time changes on files. I have added the -a which I thought was to ignore access times, but I still get it. It makes tripwire almost useless as it reports over 2000 errors. Most of the errors are the same as the one below. Google is your friend. ;-) http://www.linuxmanagers.org/pipermail/linuxmanagers/2003-May/001167.html Regards, Jim H signature.asc Description: This is a digitally signed message part
RE: Using RJ45 crimp tool
Use of the tool.. When you put the wires into the RJ-45 cap, you then insert the cable with cap on it into the squisher part of the crimper. It should only fit one way. Crossover, is where the cable goes out on friday with a big wig. Or when you need to connect two computers without a router. It crosses the in and out cables, so the in of one, is the in of another. The pairs on a crossover will be DIFFERENT on both sides of the cable. -Original Message- From: Harold Martin [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 4:22 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Whew! I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? I really appreciate all your help. Harold On Fri, 2003-10-03 at 12:16, Chris Wilson wrote: The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
Place wires in connector after stripping outer insulation, place connector in crimping tool and crimp. Cross overs are used to link hubs, routers and bridges to each other through regular ports most devices have a cross over port. Or you can use them to connect two computers without a hub,router or bridge. -Original Message- From: Harold Martin [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 4:22 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Whew! I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? I really appreciate all your help. Harold On Fri, 2003-10-03 at 12:16, Chris Wilson wrote: The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself There should have been instructions with the tool and or connectors. Trial and error works great :-) After a while, one develops their method for cutting, trimming, wire arranging and crimping. It is easier to show you. So, see if you can find someone who has done RJ-45 crimping and have that person show you. 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? Straight: computer to switch/hub/router Crossover: computer to computer or switch/hub/router to switch/hub/router It is getting to the point where xover cables aren't needed because the devices either auto detect the wiring or have a switch for switching the wiring between units. MB -- e-mail: [EMAIL PROTECTED]/~\ The ASCII \ / Ribbon Campaign [So it's true, scythe matters. Willow 5/12/03] X Against Visit - URL: http://vidiot.com/ / \ HTML Email -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
This might help you out http://www.mi.chu.edu.tw/~ykchang/Courses/DataComm/CAT5-wiring/CAT5-wiring.html http://www.aptcommunications.com/ncode.htm Good luck!! It's really rather easy JEFFREY WIMMER - Original Message - From: Harold Martin [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 03, 2003 1:06 PM Subject: Using RJ45 crimp tool Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
off topic
off topic but i thought it a good read. flame suite is on http://news.com.com/2010-7344-5083904.html?tag=cd_gutspro -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Using RJ45 crimp tool
Zyski, John wrote: Use of the tool.. When you put the wires into the RJ-45 cap, you then insert the cable with cap on it into the squisher part of the crimper. It should only fit one way. Crossover, is where the cable goes out on friday with a big wig. Or when you need to connect two computers without a router. It crosses the in and out cables, so the in of one, is the in of another. The pairs on a crossover will be DIFFERENT on both sides of the cable. -Original Message- From: Harold Martin [mailto:[EMAIL PROTECTED]] Sent: Friday, October 03, 2003 4:22 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Whew! I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? I really appreciate all your help. Harold On Fri, 2003-10-03 at 12:16, Chris Wilson wrote: The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to "what ever wire straight through". You get "cross talk" across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED]] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the "hook" is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED]] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list Talk about off-topic posts...I'm getting so much spam these days, and I look in my RedHat folder and there's like 20+ posts on using a crimping tool. Stop the madness! This is the kind of question which google was made for...use google. One or two answers to the poster (pointing them to a book or other newsgroup/etc.) and I'm fine...not a peep. I won't chastise a single post and one or two replies...but jeez. This topic needs to go somewhere else...telco? offline? If it were related to crimpingpolishing fiber, I'd understand the # of posts, but for cat5??!?!?! I wish my on-topic posts received this kind of attention. Where's jason when you need him!
8139too.o: init module: No such device
I've had a working desktop installation of Redhat 7.1 for about 2 years. No big problems. Yesterday it failed to boot giving the following message: /lib/8139too.o: init_module: No such device Hint: insomd errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Error: /bin/insmod exited abnormally Mounting /proc filesystem Creating root device mount error 19 mounting ext2 pivotroot: pivot_root(/sysroot, /sysroot/initrd) failed:2 Freeing unused kernel memory: 252k freed Kernel panic: No init found. Try passing init= option to kernel I can boot to linux rescue using the CD. I can mount the root filesystem. I've checked to make sure I have an initrd sub-directory with correct permissions. I've run fsck and the filesystem is fine. So I'm guessing it's a problem somewhere in the 8139too module. I tried to install it manually using insmod, but it failed. I tried recompiling the module from the source, but I'm not to well versed in compiling from source, so after not finding anything more specific in the archives or google, I thought I'd try the list. Any ideas on how to trace down this problem? thanks, regis -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
CD-RW media question
Hello, I was wondering how many times a CD-RW disc is good for? I do a nightly incremental backup and didn't want to over-exceed its life span/# of re-writes. I'm just using the garden variety cheap media. TIA - TE Dukes Enterprises, Inc. Palmetto Shopper http://www.palmettoshopper.com Serving all of South Carolina and beyond! Palmetto Politics http://www.palmettoshopper.com/politics/ -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: baja de lista
At 01:07 10/3/2003, you wrote: Alguién me puede decir como me puedo dar de baja de esta lista gracias... Hasta abajo de cada mensaje que te envía la lista hay un URL. Vé a esa página de Web y busca ahí un botón de unsubscribe. Tendrás que decirle cuál dirección de email quieres dar de baja, y te pedirá un password, posiblemente también te envíe un mensaje de confirmación. -- Rodolfo J. Paiz [EMAIL PROTECTED] -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Finding a hardware RAID-1 array
I just installed a Promise Technology TX2000 RAID controller. Promise Technology referred me to the Linux community to help me find my array. Any takers? Earl -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: off topic
Yeah, I've had it with SCO. I wish IBM would just throw their weight at them and make them go away for good. That would be a plus. :-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of tony d Sent: Friday, October 03, 2003 5:04 PM To: [EMAIL PROTECTED] Subject: off topic off topic but i thought it a good read. flame suite is on http://news.com.com/2010-7344-5083904.html?tag=cd_gutspro -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Is it possible to used red hat as a BDC?
Hello all, I've got a newbie question here ... Is it possible to used red hat as a BDC? I would love to be able to drop in an Extra Linux server and do this if it is possible ... TIA Keith Birchfield --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/2003 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Soln: Finding a hardware RAID-1 array
I figured out that it shows up as a SCSI device, /dev/sda. I just installed a Promise Technology TX2000 RAID controller. Promise Technology referred me to the Linux community to help me find my array. Any takers? Earl -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Newbie! How to set alias with Apache configuration GUI
Hi! I'm starting with linux. i don't know if the question i'm writing has been questioned before, if so i'm sorry. I'm using Apache as web server, and i don't know how to implement a directory alias in the Apache (like a virtual directory in the Win IIS). Suppose my web server has the following base name: /www.my_server.com/ and it is associated with the directory /my_dir/www_dir. My problem is that i need to associate the following directory /misc_dir/food_dir with the link /www.myserver.com/food. I'm using the Apache GUI provided with Linux RedHat 9. Can any one help me, please. Thanks Rui Cruz -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
How to actually use the tool itself: First, I have 2 crimp tools. One I bought long, long ago and another that I got for free with a spool of CAT5 cable. The free one looks good, but doesn't make a reliable cable. The one I got long, long ago really works well. There is a quality difference. Here's what I do... Strip off a couple of inches of the outer insulation off of the bundle pair. Get the wires in the right order, but as you are doing that, work them, work them, work them so that they are straight, flat and parallel. (This takes some time. Be patient. The time spent here is well spent) Now hold the wires so that the bundle in the right order is flat and sticks straight out. Cut the wires so that they are all the same length. Make your cut as perpandicular to the wire as possible. (A straight cut is important). Now pick up an RJ45 plug and slide the wires into the plug. Now push them further in. Now push them still further in. Look through the plastic of the RJ45 plug and make sure that they are pushed all the way in!!! If not, keep pushing. Slide the plug into the matching opening in the crimp tool (it only goes in one way) and squeeze the handles of the crimping tool very hard. Squeeze them several more times to make sure that you have a good connection. Use a cable tester to check the cable and you are done. Mark On Fri, 3 Oct 2003, Harold Martin wrote: Whew! I think I understand the ordering of the wires now, but I still have two questions: 1. How to actually *use* the tool itself 2. (kinda stupid, I know) what is the diff between crossover and patch cables and when should either be used? I really appreciate all your help. Harold On Fri, 2003-10-03 at 12:16, Chris Wilson wrote: The order previously stated below does a good job for reducing noise if you use this cable for Telephone or Ethernet. With that pin-out the T/R pin are twisted together and the A1/A2 pins are twisted together so you get a better Common Mode Noise Rejection which makes it suitable for Telco or Network (= 100Mb/s). But I do believe the TIA568A (see 568B for cross over) standard colors are: 1 White Green (Ether TX+ 1) 2 Green (Ether TX- 2) 3 White Orange (RX+ 3 / Telco A1) 4 Blue (Telco TIP) 5 White Blue (Telco Ring) 6 Orange (Ether- 6 / Telco A2) 7 White Borwn 8 Borwn -- Chris On Fri, 2003-10-03 at 13:38, Jason Staudenmayer wrote: I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
wierd shadow entries
Hi, I noticed that my shadow passwd entries are in plain text!!! I have a fresh install of Redhat 9 with all the patches and no custom configs. Before I implement YP, I need to make sure that ypcat will not return passwords in plaintext. Can anyone help me in figuring out why /etc/shadow has them in plain text? Bri- __ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Redhat 8.0 and Postfix 2.X
All, Sorry if this is not the right list for this question, if it is, please re-direct me to the right list. I have been using Postfix 1.1 for over a year, but wanted some of the functionality of Postfix 2.0, after using RPM install, I found that Postfix 2.0 doesn't support SASL authneeded because AOL stopped taking mail from Dynamic IP users, and I had to setup mail relaying to an SMTP host (SBC) for my outbound mail.well, I broke that while upgrading to Postfix 2.0. Since I installed from RPM, how do I make it use SASL? warning: smtp_sasl_auth_enable is true, but SASL support is not compiled in Thanks, Brett
Is it possible to use red hat as a BDC?
Hello all, Is it possible to used red hat as a BDC? I would love to be able to drop in an Extra Linux server and do this if it is possible ... TIA Keith Birchfield --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/2003 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: Using RJ45 crimp tool
Yeah, this is a good point. If you notice that on the 568B standard the blue pair separates the green. This is to prevent crosstalk. Ethernet(10Mbps) and FastEthernet(100Mbps) both only use 4 pins which correspond to 4 wires. Pins 1,2,3 and 6. I believe that TX are 1,2 and RX are 3 and 6. So it really doesn't matter what color you use where, as long as there is a pair separating the 1,2 from the 3,6 (although it would be silly to deviate from the standard). Of course, I have been in some buildings where they just seem to make up their own wiring standard! - nick -Original Message- From: Jason Staudenmayer [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:39 AM To: '[EMAIL PROTECTED]' Subject: RE: Using RJ45 crimp tool I think order does matter or at least the pairs match. I have had some hand made cables crap out due to what ever wire straight through. You get cross talk across the pairs and wind up with weird issues. -Original Message- From: Nick White [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 2:37 PM To: [EMAIL PROTECTED] Subject: RE: Using RJ45 crimp tool Pin 1 is on the left if the hook is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. -Original Message- From: cajun [mailto:[EMAIL PROTECTED] Sent: Friday, October 03, 2003 11:18 AM To: [EMAIL PROTECTED] Subject: Re: Using RJ45 crimp tool Harold Martin wrote: Hello, Can anyone point mt toward a how-to on using an RJ45 crimp tool? Thanks, Harold Hi Harold, I don't think there is any how to on that. What are you needing to know exactly? Or you needing to know the pin out for the wiring? If so here is what I have always used: Pin No.Strand Color 1white orange 2orange 3white green 4blue 5white blue 6green 7white brown 8brown HTH!! Lee Perez -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Is it possible to use red hat as a BDC?
Have you looked at Samba? I believe it can act as a BDC. JAV -- Original Message --- From: Keith Patty Birchfield [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Fri, 3 Oct 2003 19:13:15 -0400 Subject: Is it possible to use red hat as a BDC? Hello all, Is it possible to used red hat as a BDC? I would love to be able to drop in an Extra Linux server and do this if it is possible ... TIA Keith Birchfield --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/2003 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list --- End of Original Message --- -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: Minimal install RH8?
On Fri, 2003-10-03 at 11:17, R Snchez wrote: Wasn't there some type of distro proyect that was precisely a RedHat adaptation for minimal systems? Yes, it's called RULE. http://www.rule-project.org -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
f2c and fort77
Where can I get f2c and fort77 for my Red Hat 9 (RPMS)? Or alternatively, where can I get recent version source code for them ? Thanks, Herbert -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
htb errors, I need patch?
I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK answers: No such file or directory Deleted old root disk on eth0 Unknown filter flowid, hence option 1:10 is unparsable Unknown filter flowid, hence option 1:2 is unparsable RTNETLINK answers: Invalid argument RTNETLINK answers: Invalid argument RTNETLINK answers: Invalid argument RTNETLINK answers: Invalid argument Thanks! Alex -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
Re: CD-RW media question
At 15:20 10/3/2003, you wrote: I was wondering how many times a CD-RW disc is good for? I do a nightly incremental backup and didn't want to over-exceed its life span/# of re-writes. I'm just using the garden variety cheap media. Try googling for it. Don't take my word for it, but somewhere back in the dark ages (when this stuff was being invented) I recall reading that media was good for about 1,000 rewrites. For whatever _that's_ worth... -- Rodolfo J. Paiz [EMAIL PROTECTED] -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list
RE: SpeedStream 5200 ADSL Modem
Hal, The 5200 supports Ethernet and USB. My DSL provider uses PPPoA. Does the modem do all of the PPPoA authentication with the provider or do I need to use PPoE over PPPoA to authenticate from the Linux box? Thank you Bob -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Hal Burgiss Sent: Wednesday, October 01, 2003 10:25 PM To: redhat-list Subject: Re: SpeedStream 5200 ADSL Modem On Wed, Oct 01, 2003 at 08:28:59PM -0500, Bob wrote: My questions are: - Will RH7.0 support a USB connection to a SpeedStream 5200 ADSL modem ? I don't think any of the Speedstream modems had Linux drivers (which is required). Its more than just a dumb USB device. Best bet is to get on of the Speedstream ethernet models that is compatible with this USB one. -- Hal Burgiss -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list