Re: [Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread Chuck Kelsey 






Well, memory was incorrect. Radio Shack does not 
have anything that close. They have 1K CT to 8 ohm and another 1:1 for 600-900 
ohms.
 
As far as being a purist, I was assuming that it 
was already tried and didn't work well.
 
Chuck
WB2EDV
 
 
 

  - Original Message - 
  From: 
  WD7F - John in Tucson 
  
  To: Repeater-Builder@yahoogroups.com 
  
  Sent: Sunday, December 12, 2004 7:04 
  PM
  Subject: Re: [Repeater-Builder] 600 - 10k 
  ohm Interface
  
  You guys are all purists.  Hook it up and 
  see if it works.
  de WD7F
  John in Tucson
   
  
- Original Message - 
From: 
Chuck Kelsey 

To: Repeater-Builder@yahoogroups.com 

Sent: Sunday, December 12, 2004 4:47 
PM
Subject: Re: [Repeater-Builder] 600 - 
10k ohm Interface

I believe Radio Shack sells a matching 
transformer that will work.
 
Chuck
WB2EDV
 













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ 
To unsubscribe from this group, send an email to:[EMAIL PROTECTED] 
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread WD7F - John in Tucson 






You guys are all purists.  Hook it up and see 
if it works.
de WD7F
John in Tucson
 

  - Original Message - 
  From: 
  Chuck Kelsey 
  
  To: Repeater-Builder@yahoogroups.com 
  
  Sent: Sunday, December 12, 2004 4:47 
  PM
  Subject: Re: [Repeater-Builder] 600 - 10k 
  ohm Interface
  
  I believe Radio Shack sells a matching 
  transformer that will work.
   
  Chuck
  WB2EDV
   
   
   
  
- Original Message - 
From: 
Kevin & 
Natalia 
To: Repeaters Users Group ; Repeater Builder Users 
Group 
Sent: Sunday, December 12, 2004 6:14 
PM
Subject: [Repeater-Builder] 600 - 10k 
ohm Interface

Hi All,
 
I need a simple interface for a 600 ohm output radio to a controller 
which accepts 10k ohm.
This is a RX not TX.
 
I don't want to make a circuit board if I don't need to.
 
Any ideas?
 
Regards
 
Kevin.
 













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ 
To unsubscribe from this group, send an email to:[EMAIL PROTECTED] 
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread Chuck Kelsey 






I believe Radio Shack sells a matching transformer 
that will work.
 
Chuck
WB2EDV
 
 
 

  - Original Message - 
  From: 
  Kevin & 
  Natalia 
  To: Repeaters Users Group ; Repeater Builder Users 
  Group 
  Sent: Sunday, December 12, 2004 6:14 
  PM
  Subject: [Repeater-Builder] 600 - 10k ohm 
  Interface
  
  Hi All,
   
  I need a simple interface for a 600 ohm output radio to a controller 
  which accepts 10k ohm.
  This is a RX not TX.
   
  I don't want to make a circuit board if I don't need to.
   
  Any ideas?
   
  Regards
   
  Kevin.
   













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ 
To unsubscribe from this group, send an email to:[EMAIL PROTECTED] 
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: [Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread Ralph Mowery 


--- Kevin & Natalia <[EMAIL PROTECTED]> wrote:

> Hi All,
> 
> I need a simple interface for a 600 ohm output radio
> to a controller which accepts 10k ohm.
> This is a RX not TX.
> 
> I don't want to make a circuit board if I don't need
> to.
> 
> Any ideas?
> 
>
Just hang a resistor of about 600 ohms across the
radio output and connect the input to the controller
to it.  If you have enough voltage to drive the
controler you do not normally need to worry about
matching the impedances.
  



__ 
Do you Yahoo!? 
All your favorites on one personal page – Try My Yahoo!
http://my.yahoo.com 




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread Q 

Simplest way is with a standart 600 to 10k transformer.

Kevin & Natalia wrote:

> Hi All,
>  
> I need a simple interface for a 600 ohm output radio to a controller 
> which accepts 10k ohm.
> This is a RX not TX.
>  
> I don't want to make a circuit board if I don't need to.
>  
> Any ideas?
>  
> Regards
>  
> Kevin.
>  
>
>
>
>
>
>
>
> 
> *Yahoo! Groups Links*
>
> * To visit your group on the web, go to:
>   http://groups.yahoo.com/group/Repeater-Builder/
>
> * To unsubscribe from this group, send an email to:
>   [EMAIL PROTECTED]
>   
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>   Service .
>
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] 600 - 10k ohm Interface

2004-12-12 Thread Kevin & Natalia 






Hi All,
 
I need a simple interface for a 600 ohm output radio to a controller which 
accepts 10k ohm.
This is a RX not TX.
 
I don't want to make a circuit board if I don't need to.
 
Any ideas?
 
Regards
 
Kevin.
 













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ 
To unsubscribe from this group, send an email to:[EMAIL PROTECTED] 
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Repeater-Builder] ACC ITC-32

2004-12-12 Thread Q 

Anyone familiar with this old controller? I need to press it into 
service and change callsign and ect. I downloaded the pdf files already. 
Thanks in advance and Seasons Greetings,73,Lee,N3APP





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] Uniden IMU250K Audio Output

2004-12-12 Thread w9mwq 


Can anyone tell me a good point inside of the Uniden IMU250K radio 
where to obtain a good audio output for the controller other than 
the speaker output?  Thanks.

Mathew
W9MWQ








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

RE: [Repeater-Builder] MASTR II mobile conversion question

2004-12-12 Thread Vincent Caruso 

Remember GE did change names a few times since the Mastr II and Delta lines
were introduced.

-Original Message-
From: russ [mailto:[EMAIL PROTECTED]
Sent: Sunday, December 12, 2004 13:20
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MASTR II mobile conversion question



I mite be wrong. Where did you look it up at? I have the list from the FCC I
just got it about 3 months back and there are no GE's on it (GMRS Part 95)
It is about 600 pages long and no GE.
73 Russ,
Ham, W3CH.
GMRS, WPYK-254.

- Original Message -
From: "Kevin King" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, December 12, 2004 12:08 AM
Subject: RE: [Repeater-Builder] MASTR II mobile conversion question


>
> not true russ. Deltas are look it up.
>
> Kevin King SCSA BSCIS
> ARS KC6OVD
> GMRS KAG0378
> EIEIO 2722
> Acworth Georgia
>
>
> -Original Message-
> From: russ [mailto:[EMAIL PROTECTED]
> Sent: Saturday, December 11, 2004 2:12 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: Re: [Repeater-Builder] MASTR II mobile conversion question
>
>
>
> No it would not! It is not type accepted under part-95 of the FCC rules
for
> GMRS. in fact no GE ever was.
> 73 Russ,
> Ham, W3CH
> GMRS, WPYK-254
>
> - Original Message -
> From: "cdldoug" <[EMAIL PROTECTED]>
> To: 
> Sent: Saturday, December 11, 2004 1:00 PM
> Subject: [Repeater-Builder] MASTR II mobile conversion question
>
>
> >
> >
> > Will a GE mastr II mobile comb# MX76CBU88A be good radio to convert
> > to a repeater for 462Mhz (GMRS)? I am concerned about the 30khz
> > channel spacing this radio has compared to 25khz on other mastr II's
> > I have seen.
> > Thanks
> > Cecil
> > KF6ZOK
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>






Yahoo! Groups Links















 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] DVR Audio FIles

2004-12-12 Thread w9mwq 


Does anyone know of a site that has a good collection of repeater 
related audio files. Preferebly courtesy tones and general 
announcement. Thanks.

Mathew
W9MWQ








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] celwave 5042-1

2004-12-12 Thread russ 

Celwave was bought by RFS. I will send you the tuning info I have on the
5042-1 direct.
73 Russ, W3CH

- Original Message - 
From: "milguy111" <[EMAIL PROTECTED]>
To: 
Sent: Saturday, December 11, 2004 5:12 PM
Subject: [Repeater-Builder] celwave 5042-1


>
>
>
> anyone have a PDF of the tuning instructions for this duplexer?
>
>
> if you could email it to me (so i don't have to wait until monday for
> celwave)
>
> i would appreciate it.
>
>
>
> doug
> [EMAIL PROTECTED]
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] MASTR II mobile conversion question

2004-12-12 Thread russ 

I mite be wrong. Where did you look it up at? I have the list from the FCC I
just got it about 3 months back and there are no GE's on it (GMRS Part 95)
It is about 600 pages long and no GE.
73 Russ,
Ham, W3CH.
GMRS, WPYK-254.

- Original Message - 
From: "Kevin King" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, December 12, 2004 12:08 AM
Subject: RE: [Repeater-Builder] MASTR II mobile conversion question


>
> not true russ. Deltas are look it up.
>
> Kevin King SCSA BSCIS
> ARS KC6OVD
> GMRS KAG0378
> EIEIO 2722
> Acworth Georgia
>
>
> -Original Message-
> From: russ [mailto:[EMAIL PROTECTED]
> Sent: Saturday, December 11, 2004 2:12 PM
> To: Repeater-Builder@yahoogroups.com
> Subject: Re: [Repeater-Builder] MASTR II mobile conversion question
>
>
>
> No it would not! It is not type accepted under part-95 of the FCC rules
for
> GMRS. in fact no GE ever was.
> 73 Russ,
> Ham, W3CH
> GMRS, WPYK-254
>
> - Original Message - 
> From: "cdldoug" <[EMAIL PROTECTED]>
> To: 
> Sent: Saturday, December 11, 2004 1:00 PM
> Subject: [Repeater-Builder] MASTR II mobile conversion question
>
>
> >
> >
> > Will a GE mastr II mobile comb# MX76CBU88A be good radio to convert
> > to a repeater for 462Mhz (GMRS)? I am concerned about the 30khz
> > channel spacing this radio has compared to 25khz on other mastr II's
> > I have seen.
> > Thanks
> > Cecil
> > KF6ZOK
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] Re: WTB: Helper Instruments SM-512 Service Manual

2004-12-12 Thread skipp025 


Hi Rob, 

Helper is now owned by Zetron.  They were happy to 
sell me a Service Manual last year.  Zetron's support 
for Helper seems to be very good. I can't say the 
same for Zetron supporting their own stuff. Try 
buying a manual for some of their paging equipment 
over 5 to 8 years old. 

Good luck... 
cheers, 

skipp 
skipp025 at yahoo.com 
www.radiowrench.com 

>  "Rob Odell" <[EMAIL PROTECTED]> wrote:
> 
> 
> I know this is a bit off-topic, but, the service manuals for these 
> little things are pretty tough to find.
> 
> I'm happy to pay any shipping/copying or whatever?
> 
> Thanks,
> 
> Rob
> W2IO
> Erie, CO







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] Antenna Question

2004-12-12 Thread rrath 

Hello to the list. I know this topic has come up over and over before, 
but, I have a question. I have a Stationmaster type antenna that I 
want to retune. I am trying WD8CHL's mod. I have put three pieces 
of aluminum foil on and it has not changed the SWR reading from 
the first piece I put on. If Jim Barbour is reading this or some who 
has done this with good results, please contact me direct. I do not 
want to slow down the list with an old topic. Thank you.

Rod Rath KC7VQR
rrath (at) charter (dot) net





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] WTB: Helper Instruments SM-512 Service Manual

2004-12-12 Thread Rob Odell 



I know this is a bit off-topic, but, the service manuals for these 
little things are pretty tough to find.

I'm happy to pay any shipping/copying or whatever?

Thanks,

Rob
W2IO
Erie, CO











 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

RE: [Repeater-Builder] MASTR II mobile conversion question

2004-12-12 Thread Kevin King 

not true russ. Deltas are look it up.

Kevin King SCSA BSCIS
ARS KC6OVD
GMRS KAG0378
EIEIO 2722
Acworth Georgia


-Original Message-
From: russ [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 11, 2004 2:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MASTR II mobile conversion question



No it would not! It is not type accepted under part-95 of the FCC rules for
GMRS. in fact no GE ever was.
73 Russ,
Ham, W3CH
GMRS, WPYK-254

- Original Message - 
From: "cdldoug" <[EMAIL PROTECTED]>
To: 
Sent: Saturday, December 11, 2004 1:00 PM
Subject: [Repeater-Builder] MASTR II mobile conversion question


>
>
> Will a GE mastr II mobile comb# MX76CBU88A be good radio to convert
> to a repeater for 462Mhz (GMRS)? I am concerned about the 30khz
> channel spacing this radio has compared to 25khz on other mastr II's
> I have seen.
> Thanks
> Cecil
> KF6ZOK
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





 
Yahoo! Groups Links



 









 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] Re: controller madness (whiz' bang - sparkle!)

2004-12-12 Thread Mark Holman 

Heard the Plastic Saturn has a vechicle is metal now,  after seeing a heap 
of plastic crap on the County Road  pushed by a shovel totally toast didn't 
take the road crew to shovel it up and toss in the rear of a standard box 
dump truck!  wish I had my digital camera to share the pile of junk !!

Another Chevy Vega mishap !

Mark Holman  AB8RU
Happy Holidays
- Original Message - 
From: "Richard W. Solomon" <[EMAIL PROTECTED]>
To: 
Sent: Wednesday, December 08, 2004 11:54 AM
Subject: Re: [Repeater-Builder] Re: controller madness (whiz' bang - 
sparkle!)


>
> Why do all these new cars look like "rice boxes" ??
>
> 73, Dick, W1KSZ
>
> -Original Message-
> From: Tedd Doda <[EMAIL PROTECTED]>
> Sent: Dec 8, 2004 11:14 AM
> To: "Repeater-Builder@yahoogroups.com" 
> Subject: Re: [Repeater-Builder] Re: controller madness (whiz' bang - 
> sparkle!)
>
>
> On Wed, 8 Dec 2004 11:02:45 EST, [EMAIL PROTECTED] wrote:
>
>>They are so UN-cool.
>
> I agree Garynothing beats the sound of an North
> American small block V-8 (overhead cams really help!).
>
> Just one for example:
>
> http://www.fordvehicles.com/cars/mustang/launch
>
> Makes me want to sell my '78 Mustang and Windstar :)
>
>
>
> Tedd Doda, VE3TJD
>
> Lazer Audio and Electronics
> Baden, Ontario, Canada
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] Motorola Radius P50 DC adapter

2004-12-12 Thread Barry Thompson 

Hello Group,
Does anyone know what type of AC adapter is used with
the rapid charging dock or the standard charger dock
used to charge the Radius P50 HT?

I have both charging docks and can't find the AC
transformer for either...:(

Regards, Barry



__ 
Do you Yahoo!? 
The all-new My Yahoo! - What will yours do?
http://my.yahoo.com 




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] rg142 test cables

2004-12-12 Thread DIGITEL S.A. 






hi, to all group
can anyone tell me which could be the best measure 
for my group of cables for adjusting vhf and uhf repeater duplexers in my 
laboratory?
i use rg142/u cable, but i would like to know the 
best measure for them.(unique long maibe)
actualy i have a mix of long and short cables so, 

any experience welcome.
thanks.













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ 
To unsubscribe from this group, send an email to:[EMAIL PROTECTED] 
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.