Re: [Repeater-Builder] Astron RS-35M pass transistor Socket
The most reliable solution is to just break those flimsy socket pins off and solder the wires directly to the transistor leads. I've had several supplies fail because of these type sockets. I suspect the transistor may have failed because of the heat produced by the small contact area of the socket pins. Never had a transistor failure after soldering. Dex Vince Staffo wrote: > My Astron RS-35M Power Supply has developed a problem with one of the > sockets used for the TO-3 Pass Transistors. The Astron supplied socket > does not look like it is very good quality. Does anyone know of a > better replacemnt socket that I could use? If so please provide part > number and where to order if possible. > > Thank You, > > Vince > WB2FYZ >
Re: [Repeater-Builder] Astron RS-35M pass transistor Socket
Hi Vince, cannot help you with the socket - maybe Newark or Mouser, or such. I have seen folks actually solder to the leads on the pass transistor if all else fails. 73, Steve NU5D Vince Staffo wrote: > My Astron RS-35M Power Supply has developed a problem with one of the > sockets used for the TO-3 Pass Transistors. The Astron supplied socket > does not look like it is very good quality. Does anyone know of a > better replacemnt socket that I could use? If so please provide part > number and where to order if possible. > > Thank You, > > Vince > WB2FYZ > > > > begin:vcard fn:Steve Bosshard n:Bosshard;Steve org:Bosshard Radio Service adr:;;503 B. South 25th. Street;Temple;Texas;76504;USA email;internet:[EMAIL PROTECTED] tel;work:254-773-1102 tel;fax:254-773-1174 tel;home:254-770-0111 tel;cell:254-624-4230 url:http://www.bosshardradio.com version:2.1 end:vcard
[Repeater-Builder] Astron RS-35M pass transistor Socket
My Astron RS-35M Power Supply has developed a problem with one of the sockets used for the TO-3 Pass Transistors. The Astron supplied socket does not look like it is very good quality. Does anyone know of a better replacemnt socket that I could use? If so please provide part number and where to order if possible. Thank You, Vince WB2FYZ