Re: [Repeater-Builder] GE mastr II UHF and rc-210
On Wed, 23 Mar 2005 16:05:25 -0600, Brent wrote: >That fixed it, Wonder what caused that to happen.. Thaks again.. I wish I knew Brent. I run discriminator audio (not switched audio) from all of the radios, so I wonder if the cross switch chip within the 210 got locked allowing the audio from one port to be transfered over to port one. Don't forget to reset all your link commands, unless you have them setup in macro one (they get reset during this controller reset). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] GE mastr II UHF and rc-210
Tedd, Same here , I am only getting the white noise on Port 1 also. I have mastr II's on port 1 and 2 and a maxtrac on port 3 at this time.. I will try the reset and see what happends. Thanks for the Info Tedd. Brent - Original Message - From: "Tedd Doda" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 23, 2005 4:05 PM Subject: Re: [Repeater-Builder] GE mastr II UHF and rc-210 > > On Wed, 23 Mar 2005 14:32:08 -0600, Brent wrote: > > >All the sudden last night at about 11:30 it went to ID and all there was, is > >white noise. no voice can pass thru. > > Funny, my 210 did the same thing a couple weeks ago, but I could > just make out someones audio coming through with the noise. > > Unlock the controller and send the reset command (*21999) > and see if that helps. Using a Mastr II UHF on port one, > a 6 meter Mastr II on port 2, and a Phoenix link radio > on port three. I was only getting the "white/pink" noise > on port one. > > It never happened again, so I've never bothered Ken about it. > > > > Tedd Doda, VE3TJD > > Lazer Audio and Electronics > Baden, Ontario, Canada > > > > > > > Yahoo! Groups Links > > > > > > > > --- > [This E-mail scanned for viruses at TNWEB LLC] > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 --- [This E-mail scanned for viruses at TNWEB LLC] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] GE mastr II UHF and rc-210
Tedd, That fixed it, Wonder what caused that to happen.. Thaks again.. - Original Message - From: "Tedd Doda" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 23, 2005 4:05 PM Subject: Re: [Repeater-Builder] GE mastr II UHF and rc-210 > > On Wed, 23 Mar 2005 14:32:08 -0600, Brent wrote: > > >All the sudden last night at about 11:30 it went to ID and all there was, is > >white noise. no voice can pass thru. > > Funny, my 210 did the same thing a couple weeks ago, but I could > just make out someones audio coming through with the noise. > > Unlock the controller and send the reset command (*21999) > and see if that helps. Using a Mastr II UHF on port one, > a 6 meter Mastr II on port 2, and a Phoenix link radio > on port three. I was only getting the "white/pink" noise > on port one. > > It never happened again, so I've never bothered Ken about it. > > > > Tedd Doda, VE3TJD > > Lazer Audio and Electronics > Baden, Ontario, Canada > > > > > > > Yahoo! Groups Links > > > > > > > > --- > [This E-mail scanned for viruses at TNWEB LLC] > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 --- [This E-mail scanned for viruses at TNWEB LLC] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] GE mastr II UHF and rc-210
On Wed, 23 Mar 2005 14:32:08 -0600, Brent wrote: >All the sudden last night at about 11:30 it went to ID and all there was, is >white noise. no voice can pass thru. Funny, my 210 did the same thing a couple weeks ago, but I could just make out someones audio coming through with the noise. Unlock the controller and send the reset command (*21999) and see if that helps. Using a Mastr II UHF on port one, a 6 meter Mastr II on port 2, and a Phoenix link radio on port three. I was only getting the "white/pink" noise on port one. It never happened again, so I've never bothered Ken about it. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] GE mastr II UHF and rc-210
I for got to add that I have also tightened up the SQ and turned on the PL - Original Message - From: "Brent" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 23, 2005 2:32 PM Subject: [Repeater-Builder] GE mastr II UHF and rc-210 > > For the past two days my repeater has been working great..it is a GE mastr > II uhf at 40watts, no preamp, phelps dodge duplexers and a db-420 antenna > fedwith 7/8" andrews. > > All the sudden last night at about 11:30 it went to ID and all there was, is > white noise. no voice can pass thru. > it will blow white noise for as long as you have the repeater keyed up, and > when you un key it still have the white noise for as longs as the hang time > and then it drops. You can not hear the curtiousy beeps for speech id's etc. > > Any thoughts on what could be going on.. > Brent > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 > > --- > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > Yahoo! Groups Links > > > > > > > > --- > [This E-mail scanned for viruses at TNWEB LLC] > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 --- [This E-mail scanned for viruses at TNWEB LLC] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] GE mastr II UHF and rc-210
For the past two days my repeater has been working great..it is a GE mastr II uhf at 40watts, no preamp, phelps dodge duplexers and a db-420 antenna fedwith 7/8" andrews. All the sudden last night at about 11:30 it went to ID and all there was, is white noise. no voice can pass thru. it will blow white noise for as long as you have the repeater keyed up, and when you un key it still have the white noise for as longs as the hang time and then it drops. You can not hear the curtiousy beeps for speech id's etc. Any thoughts on what could be going on.. Brent -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005 --- [This E-mail scanned for viruses at TNWEB LLC] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
