RE: [Repeater-Builder] More power, Scotty!
On Mon, 24 Jan 2005, Mathew Quaife wrote: Sounds like a ground issue. Your Astron 35 amp power supply is actually 26 amps normal, 35 amps surge. How much power are you running? Some of the other techs can correct me if I am wrong, but to tie them together you have to use some diodes to prevent one from feeding back into the other. Then positive to positive and negative to negative. It's been several years since I have tied two together, but it seems that is the way we done it. Just tie the grounds together and let the positives remain independent. -- Kris Kirby [EMAIL PROTECTED] BIG BROTHER IS WATCHING YOU! This message brought to you by the US Department of Homeland Security Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] More power, Scotty!
At 11:00 PM 1/24/2005 -, you wrote: While building out my repeater empire, I discovered that an Astron RM- 35 does not like providing 30 amps continuous :) So, I thought I would run the latest repeater on a separate power supply. However, the controller, an Arcom RC-210, would not recognize COS and PTT states of the repeater on a separate power supply. What is the correct procedure to tie these two power supplies together, to either: A. Provide more than 30 amps continuous together, or B. have the ground of the second power supply recognized by the controller, which is running on the first power supply? ---John. One of my repeater uses 2 power supplies - one high current (50amps) that powers the repeater xmtr, receiver, preamp and controller (guess which one I use? g). A 2nd, lower current one (35 amp Astron) powers the link and remote base radios. No problems at all this way.. just make sure you tie the grounds together and you're all set! Ken -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] More power, Scotty!
I've done things like this before. (dual power supplies) As long as I tied the negative leads together I never had a problem. -- Original Message -- Received: Mon, 24 Jan 2005 05:09:02 PM CST From: dekk5fm [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] More power, Scotty! I searched through 10,000 posts and did not see this as a topic, so perhaps it is safe to ask? While building out my repeater empire, I discovered that an Astron RM- 35 does not like providing 30 amps continuous :) So, I thought I would run the latest repeater on a separate power supply. However, the controller, an Arcom RC-210, would not recognize COS and PTT states of the repeater on a separate power supply. What is the correct procedure to tie these two power supplies together, to either: A. Provide more than 30 amps continuous together, or B. have the ground of the second power supply recognized by the controller, which is running on the first power supply? The repeaters are 1100 feet up a tower, in a very cramped space, so I thought I would ask here before experimenting. Thank you! Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] More power, Scotty!
Sounds like a ground issue. Your Astron 35 amp power supply is actually 26 amps normal, 35 amps surge. How much power are you running? Some of the other techs can correct me if I am wrong, but to tie them together you have to use some diodes to prevent one from feeding back into the other. Then positive to positive and negative to negative. It's been several years since I have tied two together, but it seems that is the way we done it. Mathew -Original Message- From: dekk5fm [mailto:[EMAIL PROTECTED] Sent: Monday, January 24, 2005 3:00 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] More power, Scotty! I searched through 10,000 posts and did not see this as a topic, so perhaps it is safe to ask? While building out my repeater empire, I discovered that an Astron RM- 35 does not like providing 30 amps continuous :) So, I thought I would run the latest repeater on a separate power supply. However, the controller, an Arcom RC-210, would not recognize COS and PTT states of the repeater on a separate power supply. What is the correct procedure to tie these two power supplies together, to either: A. Provide more than 30 amps continuous together, or B. have the ground of the second power supply recognized by the controller, which is running on the first power supply? The repeaters are 1100 feet up a tower, in a very cramped space, so I thought I would ask here before experimenting. Thank you! Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] More power, Scotty!
You can keep your loads seperated and just tie the ground side (negative terminals) of both power supplies together. This should take care of the problem. Connecting the power supplies in parallel to increase the current capacity can be troublesome at best. Good luck and 73, Kevin, K9HX At 06:15 PM 1/24/2005, you wrote: Sounds like a ground issue. Your Astron 35 amp power supply is actually 26 amps normal, 35 amps surge. How much power are you running? Some of the other techs can correct me if I am wrong, but to tie them together you have to use some diodes to prevent one from feeding back into the other. Then positive to positive and negative to negative. It's been several years since I have tied two together, but it seems that is the way we done it. Mathew -Original Message- From: dekk5fm [mailto:[EMAIL PROTECTED] Sent: Monday, January 24, 2005 3:00 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] More power, Scotty! I searched through 10,000 posts and did not see this as a topic, so perhaps it is safe to ask? While building out my repeater empire, I discovered that an Astron RM- 35 does not like providing 30 amps continuous :) So, I thought I would run the latest repeater on a separate power supply. However, the controller, an Arcom RC-210, would not recognize COS and PTT states of the repeater on a separate power supply. What is the correct procedure to tie these two power supplies together, to either: A. Provide more than 30 amps continuous together, or B. have the ground of the second power supply recognized by the controller, which is running on the first power supply? The repeaters are 1100 feet up a tower, in a very cramped space, so I thought I would ask here before experimenting. Thank you! Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] More power, Scotty!
I searched through 10,000 posts and did not see this as a topic, so perhaps it is safe to ask? While building out my repeater empire, I discovered that an Astron RM- 35 does not like providing 30 amps continuous :) So, I thought I would run the latest repeater on a separate power supply. However, the controller, an Arcom RC-210, would not recognize COS and PTT states of the repeater on a separate power supply. What is the correct procedure to tie these two power supplies together, to either: A. Provide more than 30 amps continuous together, or B. have the ground of the second power supply recognized by the controller, which is running on the first power supply? The repeaters are 1100 feet up a tower, in a very cramped space, so I thought I would ask here before experimenting. Thank you! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/