[Repeater-Builder] Re: CWID-70 Manual needed.
I wonder if the CWID-70 is a later version of the CWID-50 made by Control Signal, Inc. A new PROM chip programmed with your desired info costs about $25 from CSI. Here's the manual for the latter: www.repeater-builder.com/other-mfrs/csc-cwid-50-51-identifiers.pdf 73, Eric Lemmon WB6FLY --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , Don [EMAIL PROTECTED] wrote: I have a Fellow Ham looking for Info on this Unit, The sad thing is I had one and the Manual, and actually ordered a New ROM With My call on it, But I cannot find the info it is tough getting old Any info would be greatly appreciated Thanks Don KA9QJG
[Repeater-Builder] Re: CWID
Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB --- In Repeater-Builder@yahoogroups.com, Bob Dengler [EMAIL PROTECTED] wrote: At 5/4/2005 06:26 AM, you wrote: Just was wondering what cwid is available new or used. I am in need of a cwid for one of my repeaters. I normally use the hamtronics diode matrix unit but they do not have them any more. I have a RPT10 on the air that needs some identification so if anyone knows of one for sale or has any ideas please let me know. Thanks in advance. WA0VUS Larry Kemper Muscatine, Iowa mailto:[EMAIL PROTECTED][EMAIL PROTECTED] Not the easiest way, but definitely the cheapest: use K1EL's K-ID PIC: $8 shipped. The hard part is adding: -trigger timing circuitry so it sends the ID every 10 minutes but only while the repeater's in use -audio filter to clean up the square wave output. I've built a small interface board for my latest portapeater that uses the K-ID chip. I'm not 100% happy with the result as I was space time constrained (had to fit within the multi-freq. area in the G.E. MVP only had a few weeks to design, build test), but it does work. I can e-mail you the schematic if you like can even show you the result (will be spending the Monday after Dayton in the Quad Cities area). Bob NO6B Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: CWID
Dang, that ID-O-MATIC is so cool I ordered one on-the-spot! I have NO idea what I'll do with it, but that's beside the point! -- de WM4B Mike Kathleen, GA 146.25/85 -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Gary Sent: Thursday, May 12, 2005 11:44 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: CWID Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB --- In Repeater-Builder@yahoogroups.com, Bob Dengler [EMAIL PROTECTED] wrote: At 5/4/2005 06:26 AM, you wrote: Just was wondering what cwid is available new or used. I am in need of a cwid for one of my repeaters. I normally use the hamtronics diode matrix unit but they do not have them any more. I have a RPT10 on the air that needs some identification so if anyone knows of one for sale or has any ideas please let me know. Thanks in advance. WA0VUS Larry Kemper Muscatine, Iowa mailto:[EMAIL PROTECTED][EMAIL PROTECTED] Not the easiest way, but definitely the cheapest: use K1EL's K-ID PIC: $8 shipped. The hard part is adding: -trigger timing circuitry so it sends the ID every 10 minutes but only while the repeater's in use -audio filter to clean up the square wave output. I've built a small interface board for my latest portapeater that uses the K-ID chip. I'm not 100% happy with the result as I was space time constrained (had to fit within the multi-freq. area in the G.E. MVP only had a few weeks to design, build test), but it does work. I can e-mail you the schematic if you like can even show you the result (will be spending the Monday after Dayton in the Quad Cities area). Bob NO6B Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: CWID
--- In Repeater-Builder@yahoogroups.com, Gary [EMAIL PROTECTED] wrote: Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Nice. Like the K1EL K-ID PIC but with the activity timer. Wish I had known about this one a month ago. Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! www.hamgadgets.com I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! Just be careful with that square wave output. I built an 800 Hz BPF for the output of the K-ID; I'll post the schematic in a separate message. Bob NO6B Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: CWID
Here's the 800 Hz BPF for the square wave outputs of the K-ID ID-O-MATIC PIC IDers. Bob NO6B Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ attachment: 800 Hz BPF.png
Re: [Repeater-Builder] Re: CWID
Anyone figure out any information on this? i could not find anything at all - Original Message - From: Gary [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, May 12, 2005 11:44 PM Subject: [Repeater-Builder] Re: CWID Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: CWID
Try again. It worked for me. Or go direct to their website.. http://www.hamgadgets.com/index.php Wayne, AI9Q -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Mike Sent: Friday, May 13, 2005 4:33 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: CWID Anyone figure out any information on this? i could not find anything at all - Original Message - From: Gary [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, May 12, 2005 11:44 PM Subject: [Repeater-Builder] Re: CWID Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005 Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: CWID
Guys I did order the ID-O-Matic and installed it. The only thing is such trash with square wave output so built a little audio filter to smooth things out. That is more pleasant to listen too. Yes cw can be pleasant.. Also users who complained of no beep now have it. Thanks WA0VUS Larry Kemper Muscatine, Iowa [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: CWID
Can you document the changes for us? Wayne, ai9q -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Larry Kemper Sent: Friday, May 13, 2005 8:57 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: CWID Guys I did order the ID-O-Matic and installed it. The only thing is such trash with square wave output so built a little audio filter to smooth things out. That is more pleasant to listen too. Yes cw can be pleasant.. Also users who complained of no beep now have it. Thanks WA0VUS Larry Kemper Muscatine, Iowa [EMAIL PROTECTED] Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/2005 Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: CWID
Mike wrote: Anyone figure out any information on this? i could not find anything at all Here's the URL: http://www.hamgadgets.com/product_info.php?products_id=64 -- Jim Barbour WD8CHL - Original Message - From: Gary [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Thursday, May 12, 2005 11:44 PM Subject: [Repeater-Builder] Re: CWID Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: CWID
The correct callsign is N 0 X A S. The URL for the ID-O-MATIC Web site is: www.hamgadgets.com 73, Eric Lemmon WB6FLY Gary wrote: ... You might want to check out the ID-O-MATIC that is sold by N0AXS... Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: cwid-50b info.. never mind...
Let us know what you find Dave... I have a circuit diagram for it, you might have mentioned something at lunch today. It's a prom based ID unit, not a bad circuit. skipp na6df [EMAIL PROTECTED] wrote: I found them, wrong name. Fired off an email inquiring... na6df Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
